Sales material for Cisco Wireless

Does anyone knows where i can get access to some online resources for Cisco Wireless products / technology??
Would appreciated any help.

Hi Friend,
just try the Cisco Homepage. Strat from here:
http://www.cisco.com/en/US/products/hw/wireless/index.html
Best regards,
Frank

Similar Messages

Sales material for Cisco WAAS

Does anyone knows where i can get access to some online resources for Cisco WAAS products / technology??
Would appreciated any help.

Hi Hunt,
did you check this URL?
http://www.cisco.com/go/waas
From there you can drill down to Cisco WAAS software, Cisco WAE's (hardware to run WAAS) and so on.
Regards,
Sascha

Sales material for Cisco MPLS

Does anyone knows where i can get access to some online resources for Cisco MPLS products / technology??
Would appreciated any help.

Hi,
Enjoy :)
http://www.cisco.com/en/US/products/ps6557/products_ios_technology_home.html
http://www.cisco.com/en/US/tech/tk436/tk428/tsd_technology_support_protocol_home.html
HTH,
Mohammed Mahmoud.

Sales material for Cisco Storage

Does anyone knows where i can get access to some online resources for Cisco Storage products / technology??
Would appreciated any help.

Storage portfolio pages
http://www.cisco.com/en/US/products/hw/ps4159/index.html
Technical Documentation
http://www.cisco.com/univercd/cc/td/doc/product/sn5000/index.htm
If you found this helpful, please rate it.
--Colin

Network ready for Cisco wireless ?

I know for IPT their is lots of network readiness guides. Is their anything like that for Cisco wireless (with central controler)? We looking at putting in Dell swithcs and not cisco. Anybody have any switch level feture I should be looking out for?

For autonomous you would likely need less features on a switch then with autonomous access points. I'm not a fan of Dell switches, but at the edge they should be fine. With the lightweight APs you don't have to trunk to the access points ('cept H-REAP configs), so you could potentially plug them into hubs!
I would probably look for a PoE midspan if you are not using the new 3560E swithes. Microsemi sells a managed hi-power midspan that support all Cisco access points all the way up to the 1250s (and assumptively beyond). Purchasing 802.3af PoE now seems like a bad idea.

Study Material for Cisco Lifecycle Services for Advanced (#650-251)

Does anyone know of a ciscopress or other text to study for Cisco Lifecycle Services for Advanced Unified Communications (#650-251)

The 650-251 LCSAUC Cisco Lifecycle Services for Advanced Unified Communications exam is the exam associated with the Advanced Unified Communications Specialization. The Cisco Lifecycle Services for Advanced Unified Communications (LCSAUC) exam assesses the candidate's knowledge and skills needed to support implementing an advanced Unified Communications solution on a network throughout each phase of the lifecycle. The exam assesses Cisco's methodology to guide customers in performing all of the necessary steps to ensure a successful implementation of Unified Communications solutions.

Cisco Wireless AP Report.

I would like to develop a report package for Cisco Wireless device using the SNMP (MIB Objects) access. Can anyone suggest me what are all kind of report i can produce ..?
Like, CPU Usage, Memory and Buffer Usage, Process utilization and Conne cted Nodes. etc.,
Does this device suppor to get all kind of information from MIBs?.
Thanks,
Moorthy,

You can get the Aironet MIBs from: http://www.cisco.com/public/sw-center/sw-wireless.shtml but will have to look at the MIB definitions to find out which ones to use. There's no short cut.

Web Based Registration for Guest Wireless Access

I just started a project to make a guest wireless network available at every site in my enterprise. Guest wireless networks are currently available at some sites. Two key goals of this project is to enable WPA/WPA2 encryption and to develop a web based registration/autentication solution. All of the sites have a mixture of 1230, 1240, and 1250 autonomous access points. What do I need to do/get in order to make this happen?

You should get a WLC and upgrade the 1240 and 1250 and replace the 1230's if they are in remote sites.
The WLC has a Webauth feature that is great. You can define users on the WLC also if you wish.
Guest access should always be open authentication with the use of a Webauth page. This makes it easy and you won't have to help manage guest access. Autonomous ap's and to have a splash page will require a 3rd party software or you can use a Cisco NAC guest server.
Search for Cisco Wireless Guest Access or Webauth and you will see many docs on this type of setup.
Sent from Cisco Technical Support iPhone App

How to deploy "private" interactive sales material to iPad

I have been strugiling to find a way to use all the interactivity of indesigns foilos in our sales material for private us. I need to distribute in a secure manner sales material to my sales guys everywhere. But cant use DPS unless I pay a ton of money which would be over kill. I just want to use all the interactive features in indesign to make and deploy sales materials to certian sales people. (what are my choices not paying?) Ive read a few things about using acrobat workspace to share folios, but is that secure?
Or is there other applications that I could use to design such interactivity as indesigns foilis and deploy it to iPads as well as make updates? like edge animate or dreamweaver?

I am not sure I fully understand the question but I will attempt to offer some guidance and hope that it at least answers part of your query.
For transferring of files to all users on an iPad, you could use a Dropbox or iCloud account. You would basically create one login and each iPad would connect using the same account.
Depending on what interactive features from InDesign you use, you could export as an Interactive PDF for transfer. You can then add password security to this PDF so that no-one can open it without the password. This can be done in Acrobat.
Hope it helps.
Rik

Different Tax base in pricing procedure for a single sales order for different line item material.

Hi,
I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to) is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
Kindly suggest a suitable way to handle this scenario.
Regards,
Aashika Agarwal

Hi,
Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
Hope this helps.
Regards,
Palani

Error while Creating a Sales Order for a Configurable Material

Dear Members,
When I am creating a Sales Order for a Material. After Entering the Sold to Party and Material(Variant Configuration) I am getting an error in popup that Derivatiion Rule not defined for the Country IN. Please can you help me out regarding the settings for this.
Thanks,
Farhan.

It seems your issue relates to some non assignment in COPA settings. Hence, check this help link and I hope this will be helpful to you
[Source and Target Fields |http://help.sap.com/saphelp_erp2004/helpdata/en/59/65a2b8dd1711d2a6110060087a7a87/frameset.htm]
thanks
G. Lakshmipathi

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

MIGO-Sales price for material (NL1S ROH1 ) could not be found

Hi Experts
When i doing MIGO , i am getting following Error Message .i.e.,
*Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158
Diagnosis
The sales price valuation is active in the valuation area.
The system could not determine a sales price on the specified posting date for material NL1S ROH1 in unit of entry in plant .
Sales price conditions may not be defined for the material in plant .
Procedure
u2022 If you have a goods receipt for a purchase order or an order, the sales price is taken from the purchase order or the order concerned.
Check the sales price in the purchase order or the order.
u2022 if you have goods movements without a reference, you can specify the sales value (sales price including sales tax) manually.
If the screen does not have the field Sales price, then you have a Customizing error: the sales price valuation was activated in the valuation area, but the field selection of the movement type was not changed accordingly. In this case, contact your system administrator.
u2022 Check the definition of the sales price.
Note that for distribution centers, the sales price of the consumer distribution chain maintained in the distribution center's master data is used.
Proceed
If you post this movement without the sales value, the movement will be valuated with value zero. This can change the average sales price.
Please Advice us ...
Thanks in advance
Regards
Rajesh .P

Hello,
Please check the following:
-check with SE16 at table T001K whether you have sales pricing active for your valuation area,does your material belong to a very special material type
-Check SAP Note 84480 ,109881
-No sales price exists, no goods movements can be posted for an article subject to value-based inventory management. You must maintain the sales price in all cases.
Please refer the link below:
http://help.sap.com/erp2005_ehp_04/helpdata/en/12/085e95470311d1894a0000e8323352/frameset.htm
hope the information is helpful
regards

I have a Cisco wireless router. Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

Creation of Material for multiple sales organizations

Hello,
is there a way to create a material for one sales organization and that this material can easily be copied
to other sales organisations? Now it takes a lot of time to create the materials for different sales organizations with
transaction MM01. Thanks in advance,
Ivo

is 5 seconds a lot of time?
make use of copy from fields in MM01 initial screen, enter as copy from material the material number you want enhance with a new sales org view.
At the organisation pop-up make sure you enter the copy from sales org and plant on the right.
next step is just to go into the material and click save button.

Sales material for Cisco Wireless

Similar Messages

Maybe you are looking for