Sales Office is not being copied from Sales Contract

Dear SD Gurus,
In DP90(Resource-Related Billing Request), order type LV (Debit Memo Request for Contract) is generated. In the complection procedure, I have set sales office as a mandatory field. I'm expecting the sales office to be copied from sales contract when I generate ZLV(when I run DP90) but sales office is not being copied over. The strange thing is, it will only work for certain sales areas where the sales office will be copied from sales contract but not for some.
In the service order, I can see the sales org data where the sales office appears but it doesn't get copied to LV.
Any idea what has happened?
Thanks,
Soo

Hi Kamesh,
Problem found and fixed. It was because of customer master.
Thanks,
SKK

Similar Messages

Preferred vendor not being copied from the selection list of F4 --- Shop

Hi SRM Gurus,
When we are creating a shopping cart with the sources of supply, preferred list of vendors is displayed when we click the icon next to the preferred vendor in the browser. Source of supply, F4 in GUI also gives a list of vendors but if we select the vendor name, it is not being copied.
Else, if we type the business partner number in the tab, it gets selected.
Can anyone faced the similar type of problem?
Kindly suggest.
Earliest reply will be highly appreciated with points.
Sincerely,
Sridhar.

Hi Yann,
Thanks for your reply.
I checked though. My problem is little different as I can see the list of vendors and also if I type the BP id of the particular vendor in the preferred vendor tab it works. Only I cannot doubleclick the vendors name and select it to the preferredvendor tab.
Also once selected I dont have any issues in creating the PO and the complete cycle.
Any other suggestions.
Sincerely,
Sridhar.

Billing Plan Data not getting copied from Contract to SO

Hi ,
I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
Please guide me on how can this be done.
Regards,
Madhav

Hi,
plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
you can either use routine-401 or 402

TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone. as well, I cannnot pull up any emails that I sent. They just disappear.

my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.

R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support

Cases where messages are not being consumed from a queue

MQ 4.0
I have a cluster of 3 brokers. Java clients use RANDOMIZE to connect to the cluster of brokers. Message selectors are not used. My consumers are all synchronous, and connection.start() is called prior to calling MessageConsumer.receive().
What I have seen on random occassions are messages not being consumed from the queue. The problem seems to be sporadic.
I was thinking that the reason it is sporadic is because of the RANDOMIZE configuration of the client connetion / object-store.
That is, there is a possibility for the following to happen:
1) There were messages produced on a queue on broker A, but before these messages were consumed, all the consumers have been shutdown. Thus, the messages on queue stayed on broker A .... and have not been copied / clustered to the other brokers in the cluster ( As per online documentation, a queue is "copied" to other brokers only when there is a consumer for that queue on the other brokers ).
2) Then the client applications started up produced and consumers again. This time, the producers were all connected to broker B, and all consumers for the queue were also connected to broker B.
3) Because there are no other consumers for the queue on the other brokers, the messages in the queue on broker A are never consumed.
Can someone confirm that this is a possibility ?

Well ... it does seem to be the case.
I changed the object-store so that instead of using RANDOMIZE for imqAddressListBehavior, it uses PRIORITY. Therefore, all clients ( producers and consumers ) will connect to only 1 broker out of the 3 in the cluster.
After restarting all JMS clients with the new imqAddressListBehavior, there were messages in various queues in the other brokers that were not being consumed, because there are no longer any consumers on any of the other brokers.
All the messages in that broker that all JMS clients connect to are being consumed ...
Except for about 6 messages that stays in the queue for whatever reason. All consumers receiving with receive( 10000 ), and after consuming all messages above the 6, it returns without any more messages in the queue.
Well ... so much for cluster of brokers. I'll have to think of an alternative.

MDT 2012 - Tools folder not being copied over post OS install

Just started having this issue after rebuilding my 2010 DS into 2012. Using a standard task sequence, I am not doing any special with the DiskPart either. Installing to Disk 0, Partition 1. After it goes through the PostInstall phase, it is supposed to reboot
and then go into Windows and continue the task sequnce. Instead, I get a message that it is unable to find the SMS Task Sequencer. The error in the log is basically, could not locate the TSMBootStrapper in the standard locations. I look in the MININT folder
and the Tools folder is missing. If I manually copy the folder from the DS and manually kick-off the LiteTouch.wsf it then continues just fine.
I need help figuring out why the folder is not being copied into the MININT folder before the reboot.
This seems to only be happening on laptops. When I deploy to a desktop or a VM, the task sequence proceeds without issue.

IT is possible that when upgrading your MDT Deployment share from version X to Version Y, some of the scripts were not copied over correctly.
Create a *New* deployment share from scratch using the newer version of MDT, and see if that works, if it does, then start migrating over content from the bad share to the known good share, use tools like WinDiff.exe to verify each script.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Additional fields not getting copied from change req to change doc

Hi,
I created some addtional customer fields which I added both in change req and change doc.But the entries given to those fields are not getting copied from change req to the change doc as like standard SAP fields are getting copied.
Please let me know if someone worked on the similar issue.
Regards,
M.R

Hi,
We have done a similar requirement of adding additional fields in Quotation doc type at header and item level .
Also we have got the Reference data of the order being created to flow in to Additional Data B .
This is purely Abaper's Coding .when you add Additional Fields there is screen logic also to be coded for these screens .
to get the Reference order data logic has to be written in PBO of the screen which u have added additional fields .
the reference data will be validated with "VGBEL" field in VBAK table .If VGBEL is not initial then Query the VBAK table for this data in VGBEL into Internal table or work area and update the screen fields in additional data with these fields .
I have done the same and it is Working Wonderful .
Try this and Let me know Further. All the Best.
Thanks,
DevendraP.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately. The incoming server details haven't changed; the Connection Doctor shows the accounts are connected; I've turned everything off including the modern. Have exhausted my limited knowledge. Anyone with something similar?

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

Hello,
I am facing following issue regarding web analytic service for specific date 2014-08-18:
Verified following services which are running and status was success on that specific date 2014-08-18 :
Web Analytics Service
Microsoft Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
Observed latest Web Analytics Setting as below :
LastAggregationDateId
20140817 - The date id of the last successfully completed data aggregation
LastAggregationTime
2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
LastBestBetSuggestionAggregationDateId
20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
LastDataCopyTime
2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
In order to verify the same I have checked as follow:
SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
WHERE [DateId] = 20140818
Above SQL Query has returned ZERO value.
Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
Your help will be much appreciated.
Thanks and Regards,
Dipti Chhatrapati

The image itself has the answer
The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
The Web Analytics service logs this in the “.usage” files.
A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
Regards Chen V [MCTS SharePoint 2010]

Files are not being copied to the bin-debug folder

All my assets swfs are in a folder named "assets/swf" under the "src" folder.
The "Copy non-embedded files to output folder" is checked. BUT the folder is not being copied to the bin-debug...
This is also true for Icons folder (Also under "src")
Any idea why?

Bump!
comon I can't be the only one with that problem...

Item Number not getting copied from Delivery to Invoice

Dear Experts
I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
Please advise

Hi,
In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
Regs

SPED inbound delivery creation, serial num not getting copied from out delv

We enabled SPED to create inbound delivery against outbound delivery
We observed Serial numbers are not getting copied from outbound delivery to inbound deliver
can some one help
Moderator message:
Locked. Reason: duplicate.
The new post: STO GR against outbound delivery/inbound delivery
Edited by: Csaba Szommer on Jan 9, 2012 4:16 PM

Hello Mohammed,
Go through these SAP Help Pages for Delivery Creation from SAP TM. It will help you to check where have you gone wrong is the setup.
Creation of ERP Deliveries from SAP TM:
ERP Logistics Integration - SAP Library
Creation of Delivery Proposals:
Creation of Delivery Proposals - ERP Logistics Integration - SAP Library
Monitoring of Delivery Creation:
Monitoring of Delivery Creation - ERP Logistics Integration - SAP Library
Kindly let me know if it works, or else give me some more detail regarding your steps you are doing and your scenario. It might be helpful to understand and then I can provide you a solution.
Thanks and best regards,
Navin

Invite Email not being sent from iCal from a Google Apps calendar

Hello,
I am running Mac OS X 10.6.5, iCal 4.0.4, and am attempting to do the following from a Google Apps calendar I have setup in iCal. Please note that it's not gmail, it's Google Apps. If that makes a difference. That being said...
I am trying to create a meeting invite from iCal. I am able to create the invite and add attendees with no problem. When I hit send (from iCal), the invitees do not receive an email notification of the event, but it does appear their calendar (both in iCal and via Google Calendar on the web). I need an email to be sent to the invitees that they have been invited to a meeting, not just to have it appear on their calendars.
When I create the meeting invite via Google Calendar on the Web the invitees do receive an email notification (as specified in their calendar preferences). The issue only happens when the meeting invite is created in iCal.
When an invitee accepts or declines a meeting via iCal I receive an acceptance or declining email. Just not when the meeting invite is sent.
Also, I am able to create a meeting on one of the "On My Computer" calendars in iCal, invite people, and a meeting invitation is sent as expected.
And again, the invitees have notification of meeting invites turned on in their calendar settings (as is shown by the fact that when the invite is sent out via Google Calendar on the Web they receive an email with the invite).
Thanks! Any assistance would be awesome.
Aaron

That was actually my post on the Google forums
Here is what I have found so far (and hopefully some of my assumptions are correct, because we're making the full switch to Google Apps this weekend and I am assuming it will work after this). This is long, but I'm trying to be thorough. Also note that I have updated to 10.6.6 since the time I first posted my last message.
We are currently piloting Google Apps, so our primary domain (which I will refer to from now on as domain.com) still points to our old exchange servers. Mail is currently being delivered to our Google Apps pilot accounts the following way:
1. User sends an email to [email protected]. This email is delivered to our old Exchange servers.
2. Once the email is received on our old Exchange servers it gets forwarded to our Google Apps test domain (gtest.domain.com).
This seems to be an important piece of the puzzle as our primary domain (domain.com) shows up on the Google Apps for Admin dashboard as improperly setup (which is correct, because we're currently piloting)
So, in iCal I have my Google Apps account setup (I'm one of the pilot users) the following way. I added the Account as Google calendar in iCal, but once the account shows up it shows up as a CalDAV account.
Under the account information tab:
CalDAV
Description: [email protected]
User name: [email protected]
Password: my password
Under the server settings tab (*NOTE: these were entered in automatically when I setup the calendar as a Google calendar)
Server address: www.google.com
Server path: the path to my calendar.
Use SSL is checked
Use Kerberos v5 is NOT checked
So, during my testing I was sending meeting invites from people who were in the Google Apps pilot to other people who were in the Google Apps pilot. When I was doing that, no invitations were getting sent.
I created a new email account on our exchange server ([email protected]) but did NOT set it up to be a part of the Google Apps pilot (this means that emails were not being forwarded from [email protected] to [email protected]). Doing this successfully delivered all invites, cancellations, and meeting updates from iCal!
From what I can tell there must be something going on (probably my own fault) when a calendar invite is sent from my Google Apps account, through our old Exchange system, and then back to our Google Account. My assumption is it has something to do with the fact that our MX records for domain.com currently point to our old exchange servers, and the MX records for gtest.domain.com point to the Google Apps servers. It may also have something to do with the SPF record which only allows emails from domain.com to be sent from our Exchange servers.
Those are just guesses though as I am not very knowledgeable in that area.
I hope this helps and I would love to hear about anyone else working on this issue.

Podcasts not being Removed from my Ipod

I have several old podcasts that I have deleted from my ITUNES that for some reason, are not being deleted from my ipod...? The podcasts are not showing up in my itunes, so not sure how to clear them out from my ipod?? Thanks in advance for your help.

The most likely culprit is a playlist that's getting synced to your iPod.
The big change in this area in 7.7 is that all podcasts, even ones in playlists, appear in the iPod's Podcasts section. Before 7.7 the only episodes that appeared in the Podcasts section were ones that you synced in the Podcasts tab.
The interesting thing is that this change affects only what shows up in the iPod's Podcasts section, it doesn't affect the files that are actually transferred to the iPod.
To check this, find one of the episodes with the play count >= 1 in your iTunes library. Right click (or control click) the episode, and in the contextual menu go to Show In Playlist. See what playlists appear in that list. (Show In Playlist is right under Add To Playlist. If I'm wrong, Show In Playlist won't be there at all.)

My deleted emails on iPhone 4s are not being deleted from server

I'm facing a problem with my iPhone 4s when deleting emails. Unfortunately, they are not being deleted from the server. I tried setting the account in pop and imap with settings to delete from server and trash ticked. Still they keep on appearing in Outlook which is a double work to do. Please advise.

I'm no expert by far, but have had issues with this before.
IMAP should allow your iPhone to remove messages from the server.
But have you made sure both the iPhone and Outlook are connecting via IMAP?
If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
If you delete a message from Outlook does it disappear on the iPhone?
Alternativly you may need to check the email server settings.
Who is your email provider?
They may be able to check if IMAP allows you to remove emails.

Sales Office is not being copied from Sales Contract

Similar Messages

Maybe you are looking for