Sales Office values linked to Sales Org

Hi,
How can I connect sales org to sales office and sales group in IT900? for example. If user selects Sales Org 001 then a list of Sales offices that are under that Sales org will only show. And then if the user selects a Sales Office 001 then a specific list will onlybe available for selection for the sales group.
Thanks in Advance

Hi,
In OVXM we assign sales office to sales area.
OVXJ we assign sales group to sales office.
E.g In sales order creation VA01 enter sales area, when press F4 in Sales office, system search for possible sales offices from OVXM.
Regards,
Chandra

Similar Messages

  • Issue with Sales office values in BI

    Hi Team,
         We have a issue with the sales office values in a BI report.
    The report displays 7 sales office values for the division 01. Where as in ECC, we have only 6 sales office values exists for the same division 01.
    These sales office 7 has been have been loaded on april n may months.
    The master data has all the sales office values 01- 10.
    Those sales office values are coming from the Infocubes, 'Billing Document Condition' & 'Open Orders'.
    I have the checked the Multiprovider, Infocubes and the InfoObject and values exists.
    How to proceed further and correct these values?
    Appreciate your expert guidance...
    Thanks
    Regards
    Santhosh Kumar N

    Hi Krishna,
               Thanks for the reply.  The Sales office field is directly mapped  in the transformation and does not have any routine. Its the Key field.
    The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
    The Open Orders infocube is being feed by the DSO Document Order item / Delivery;  below which we have another 3 DSO.
    1st DSO has the Datasource '2LIS_13_VDITM'
    2nd DSO has the Datasource '2LIS_11_VAITM'
    3rd DSO has the Datasource '2LIS_11_V_SSL'
    The Sales Office 7 has txn records for the month of April & May.
    The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
    Please help me, if i am missing anything here and make me to understand better.

  • How to get sales org. field value in CUSTOMER_ADD_DATA~SAVE_DATA  ?

    Dear Guru ,
    The requirment is we send some information to external email system when user save the customer master data ( XD01 , XD02 ) .
    I try to use badi CUSTOMER_ADD_DATA~SAVE to satisfy this requirment , but i can't get the Sales Org value ( KNVV-VKORG ) in this badi in XD02 ...
    Has someone guide me how to do that ?
    Below abap code can get the Sales Org value in tcode XD01 , but not in tcode XD02 .
            DATA :  lv_knvv type char30 value '(SAPMF02D)KNVV'  .
            DATA : l_vkorg type vkorg .
      FIELD-SYMBOLS : <fs_xknvv> type knvv .
      ASSIGN : (lv_knvv) TO <fs_xknvv> .
    * Now i have the Sales Org in XD01 !
          l_vkorg = <fs_xknvv>-vkorg .
    Thanks .
    Best Regards,
    Carlos

      DATA :
             lv_knb1 type char30 value '(SAPMF02D)KNB1' ,
             lv_knvv type char30 value '(SAPMF02D)KNVV' ,
             lv_kna1 type char30 value '(SAPMF02D)KNA1' .
      FIELD-SYMBOLS : <fs_xknb1> type knb1 .
      FIELD-SYMBOLS : <fs_xknvv> type knvv .
      FIELD-SYMBOLS : <fs_xkna1> type kna1 .
      ASSIGN : (lv_kna1) TO <fs_xkna1> .
      ASSIGN : (lv_knb1) TO <fs_xknb1> .
      ASSIGN : (lv_knvv) TO <fs_xknvv> .
    Edited by: Carlos Zhang on Dec 17, 2010 3:25 PM

  • Getting CRM Org unit by the R/3 sales org/office/group

    Hello everyone,
    We have a need to get CRM Org unit ID by R/3 sales org/office/group as maintained in
    transaction PPOMA_CRM.
    Does anyone knows a function/table that gives this mapping ?
    Thanks,
       Nitzan.

    Hi Nitzan,
    Try it with this static methods of class CL_CRM_ORGMAN_SERVICES:
    -- From  CRM ID to R3 ID
    MAP_HROBJECT_TO_R3_SALES_GRP
    MAP_HROBJECT_TO_R3_SALES_OFF
    MAP_HROBJECT_TO_R3_SALES_ORG
    -- From R3 ID to CRM ID
    MAP_R3_SALES_GRP_TO_HROBJECT
    MAP_R3_SALES_OFF_TO_HROBJECT
    MAP_R3_SALES_ORG_TO_HROBJECT
    Kind regards,
    Garcia

  • No values for Sales Org, can be found in Campaign

    Hi gurus
    I´m implementing CRM 4.0., I created a Sales Organization by organisational model (IMG), and assigned the corresponding Sale functions to each Org.unit´. In marketing I created a Campaign with Discount(tab), but When I try to select Sales Org. to condition type, system can not find values for it.... Could some hepl to solve this problem, What´s missing???
    Thanks a lot, I reward good points !!!

    Hi all,
    I am having a similar problem . I created a campaign in webclient 2007 but i am not able to select a target group. No values are shown in the search help. What could be wrong ? Pls help me.
    Regards,
    Aravind.

  • CRM security - is look up table possible for Sales org value

    I have a requirement in CRM role where the sales organization value has to taken from a table. Since this value is different between development, Quality and production.
    Please advice if I can set the field to all the three values or is there way make the field value in role point to a table where the sales organization value will be maintained.

    Hi ,
    Did you mean to say you will have one sales org value in DEV?
    another in Quality? third variation in Production?
    If this is the case , its not a good practice
    Answer:
    If you have tried all standard options and still insist that table is the method you want to follow:
    creating a custom authority object, custom field name  with the option to have one of the three values from the table under the field name is possible (ABAP DEVELOPER should work with you on this ).
    Regards

  • BD64 Filtering Value (Sale org/ Distri Channel) need to get in EXIT_SAPLMV01_002

    IHi ,
    In BD64, Under MATMAS Data filtration is set on Sales Org and Distribution Channel. When I am sending material from BD10 , I need to get these values ( Sale Org / Distribu Channel ). B'cos on the basis of these values I need to fetch PLANT from MVKE table by passing SOrg and Dchl .
    I am reading Segment value in exit EXIT_SAPLMV01_002, but , these values are present at MVKE Segment but I need those values at MARC Segment and MVKE Segment trigger at last where MARC segment trigger initially , So I am not able capture values in Segment also.
    On the basis on MARC-MATERIAL & MVKE-PLANT , I need to fetch TRLT (Lead Time) from MARC.
    How to retrieve Sale Org/ Dch either from Filtration Set at BD64 or from MVKE Segment that is triggering later then MARC Segemnt??
    Regards
    Ankesh

    Hello Ankesh,
    Modify MARC segment after MVKE is filled.
    Please find the below sample code :-
    Loop at IDOC_DATA  into WA_ IDOC_DATA  .
    case wa_idoc_data-SEGNAM.
    when 'E1MVKEM'
    READ TABLE IDOC_DATA into WA_ido WITH KEY segname = E1MARCM     
    if sy-subrc = 0.
    *write your logic here and modify idoc_data
    endif.                               
    endcase.
    Endloop.
    Thanks

  • Table to link Sales Org , mat, Plant, storagr loc,distribution channel

    Hi Frnds,
        Can any one suggest table which is having all the fields Sales Org , mat, Plant, storagr loc,distribution channel.
    thanks,
    Y.Ravi Kumar

    Hi,
      Check these tables  
             vbak,                              "Sales Document: Header Data
             tfacs,                             "Factory calendar (display)
             vbpa,                              "Sales Document: Partner
             lips,                              "SD doc: Delivery: Item data
             mkpf,                              "Header: Material Document
             mseg,                              "Document Segment: Material
             konv.                              "Conditions (Trans Data)
    Regards,
    Prashant

  • FM to read sales org attributes with scenario SALES

    HI,
    My requirement is to read the Sales org attribute for scenario SALES. My input would be the sales org number.
    Is there any FM with this requirement or how can i find the table link for the same.

    Hi,
      You can use the FM RHGA_READ_ATTRIBUTES for this. Say, you want to read an attribute "COUNTRY" for the scenario 'SALE',
    Data: lt_attrib TYPE hrtb_attrib,
            lt_attr_val TYPE hrtb_attvalrt,
            ls_attrib LIKE LINE OF lt_attrib.
          ls_attrib = 'COUNTRY'.
          INSERT ls_attrib INTO TABLE lt_attrib.
          CALL FUNCTION 'RHGA_READ_ATTRIBUTES'
            EXPORTING
              scenario                = 'SALE'
              otype                   = 'O '  "for organization
              realo                   =  '<give Org ID>'
              attributes              = lt_attrib
    *       CHECK_AUTHORITY         = ' '
    *        PPOMA_MODE              = 'X'
    *        NO_CHECKS               = 'X'
    *       NO_INH_RESOLUTION       = ' '
    *       RECURSION               = ' '
           IMPORTING
             attrib_ext              = lt_attr_val
           EXCEPTIONS
             internal_error          = 1
             invalid_object          = 2
             invalid_scenario        = 3
             invalid_attribute       = 4
             no_authority            = 5
             OTHERS                  = 6
          IF sy-subrc <> 0.
          ENDIF.
    *Check the lt_attr_val table for attribute values
    Regards,
    Arun Prakash

  • FBL5N Cleared items not having the Sales org

    Hi Guys,
    In FBL5n open items having the Sales org (XREF1), when we are clearing the Documents, Sales org (XREF1) not coming to the cleared items.
    Is any user exit or BADI to populate the value to Cleared items also?
    Thanks
    Gourisankar.

    Hi
    Cleared and open items should be the same, i.e open item are cleared item before clearing it.
    So I suppose u mean the items of clearing document?
    If it's so u should check your FI customizing because it should be a clearing rule, so perhaps it shlould be better to ask it to your FI consultant
    Max

  • How to extend Sales org for a material being Changed

    Hi Experts,
    i need to extend sales org , distribution Channel for a material .
    my table look like this and having 6 fields shown below
      1             2         3               4            5                     6
    Sales org | Des | Distn Chnl | desc |  Copy from So | Copy from Dstn Chnl
    If the user enters the existing value in Copy From SO and Copy Fron Distn Chnl  .  Then i need to copy all the values corresponding to the Existing SO and Distrn Chnl to the Newly entered Sales Org . 
    the table im displaying in ALV , if user perss F4 in copy From SO and Copy From Distn  , i need to show the existing values for the material being changed , this is working fine and i am able to get the existing values.
    After user selects one of the existing value for SO and Distrn channel  , i need to copy all the values to newly created So and distrn Chnl  .
    i dont know how to proceed . Please help me to solve this problem.
    Thanks,
    Shrikanth

    You can use AET to extend the sales area data of BP.  However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
    BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
    Regards,
    Shaik

  • Changing proposed delivery date in sales order for one specific sales org

    Hi All,
    I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
    For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
    Thanks in advanced.
    Points will be awarded.
    Regards,

    EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
    USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

  • Maintain "Determination of Pricing Procedure" with different sales orgs. ID

    Hi experts,
    We have different sales orgs. ID for some of our sales orgs. in our Development/Quality/Production systems. When we maintained the "Determination of Pricing Procedure" in Development system for our new company and transported it to Quality system an error occurred. The sales org. ID we maintained in D wasn't available in Q. So we still have the same problem in Q as we had before. I have noticed that we have different ID for another company in our CRM system but it seems that someone has maintained "Determination of Pricing Procedure" manually for each system without any transport even if I don't think that's possible, but it look so. See pictures below:
    Development system:
    Quality system:
    O 50000125 in D is the same as O 50000075 in Q. This is working fine, but I don't know how you change it manually in Q as it seems to have been done in above picture!?
    O 50000178 in D is our new company. After transport to Q the same ID with the same values are transported correct. But the ID for the company in Q is O 50000150. So of course we still have the same problem in Q that we had before the transport.
    Does anyone know how to solve this? I guess you can't just change things manually in Q or is the correct way to do?
    Thank you in advance.
    Best regards,
    Hannes de Richelieu

    Hello Hannes,
    this really is a common issue. Org-Model can be maintained in every client and as the IDs are generated they can differ even if only the sequence in which you created the units is not the same in D/Q/P.
    What you might be interested in is report RHMOVE30. It is used to "transport" the Org-Model between Clients. Have a look here: http://scn.sap.com/thread/3537400
    This way you maintain the model once and distribute it across systems. My advise would be to take the one you have in P and refresh D and Q from it. You are still able to make adjustments in D and Q for testing. After a certain timeframe I would then refresh D and Q again to get them in sync.
    cheers Carsten

  • Need to know the table for sales org and sales area of role Sold-to  in CRM

    Dear Sir,
    Our server is CRM 5.0, I would like to download the data from CRM , however, I would like to know the table name which keep the sales org and sales area of role Sold-to  in T-code : BP . However, we can't find the actualty table.
    Please kindly advise.
    Thank you
    Lek

    Hi Vimol,
    You can get Org details in various tables like Sales Org, Division, Distribution Channel in following tables with help of PARTNER_GUID.
    Sales :
    CRMM_BUT_LNK0010
    CRMM_BUT_LNK0011
    Shipping:
    CRMM_BUT_LNK0020
    CRMM_BUT_LNK0021
    Billing :
    CRMM_BUT_LNK0030
    CRMM_BUT_LNK0031
    Organization :
    CRMM_BUT_LNK0140
    CRMM_BUT_LNK0141
    I think, for you Organization related table CRMM_BUT_LNK0141 would be useful.
    From this table you will get Sales Org, Division, Distribution Channel.
    And in order to get Sales Office of BP, you will get it from table CRMM_BUT_SET0140 where you can put set_guid fetched from CRMM_BUT_LNK0141
    Hope this helps....Please reward points if useful.
    Regards,
    Shailesh Jadhav

  • : Colon in Sales Org Field.  ECC6

    Dear experts,
    I am updating some of our roles with correct org levels.  I noticed in the sales org field of one of them there is a : in place.  Can you tell me if there is a reason for this?  I understand the ' ' but I have never come across a colon before that wasn't related to BI queries.
    I would like to remove it if its not supposed to be there so I have clean roles so to speak!
    Any replies appreciated.
    Dawn
    I have also noticed this in the customer field.  Its under controlling ZCO_REP03
    Edited by: Nicnac on Feb 19, 2010 12:47 PM

    > I have also noticed this in the customer field. Its under controlling ZCO_REP03
    Hokai! I would be carefull!
    Is this really an authorization object or a role name?
    I suspect that what the BW folks might have done is to tap into the ECC roles to reuse authorization data for their reporting authorizations. If they wantes to achieve this for all org fields from ECC and also provide the aggregation values as required (because the users and possibly re-usable roles already exist) then they might be maintaining this authorization (which appears to be useless) in the ECC system so that their extractors can extract the role data as well!!
    I would go to the BW folks and check on that side first before changing anything.
    There are several advantages from this approach, but it does create a dependency between the ERP system and the BW system which is not easily "visible" on the ECC side.
    If they are not available, then I will show you some tricks to some of the hints you can find yourself (if this is the case). Let me know.
    Actually, I am feeling lucky today so I will bet my hat on it that it is a BW extraction...
    Cheers,
    Julius

Maybe you are looking for