Sales order and Billing Should be Block as per Customer Payment Terms

When credit limit exceeded to limits As per their client requirement in sales order level credit check has done and it will save , when they trying to do Delivery it is not possible to proceed. With out changing the credit master record they want to release the sales order for special permission (VKM3)
same why i suggested the client when the payment term days exceeds how to block the customer?
Manual blocking the customer for specific sales area sales order level and billing document level . When the Payment terms exceeded . Infact I have checked with my colloegues Payment terms is transactional specific mainly used for some financial reporting example ageing report here when you look at the customer is not paid before the payment term days . you can go to VD05 block the customer.
this i have suggested , is any automically blocking the customer when the payemnt terms days exceeds ?

Hi
Open item option in OVA8 will consider all the overdue items (irrespective of payment terms).
If the particular line item in FBL5N is falling overdue, it will be considered.
% mentioned there is OD/OS percentage, ie. overdue/outstanding %. ie. if you maintain 50% in the OVA8, if your overdue value is 1000 USD & total outstanding is 2000 USD, so your od/os % is 50%. The moment your OD value increases from 1000 to eg 1200USd, system will set a credit block.
Generally noDays open item can be kept blank
I hope it is clear to you
thanks

Similar Messages

VD05 - Customer master record blocked for sales orders and billing

Hi,
I have a scenario whereby I have blocked a customer master record for sales orders and billing using transaction VD05, but it still allows you to create sales orders and post billing documents.
What is the reason for this?
Regards
Gandi

Hi,
Block the customer for the sales order, delivery and Billing for the specific sales area in vd05
and try out,
Regards
Pradeep BV.

How to display Header Texts that you find in Sales Order and Billing Doc..

Hi,
I am having some problems accessing the text that is typed in the Header Texts area of the Sales Order and Billing. To access the Header Text you should first trigger the Sales Order (VA02) then once in the Sales Order Click Goto -> Header -> Texts. The same follows to the Billing.
I need to extract what is typed here on to a report. First of all I cant figure out which table is used to save this information. I am suspecting that this information is encoded and stored in a table. To display this I may need to decode it.
Is there some one who could help me to archive this please!!!
Many Thanks,
Kishan

Hi Kishan,
The texts you find in all SAP Object, like orders, invoice, materials, ... can be extract with FM 'READ_TEXT'.
To know the parameters of the FM, you 'll have to go to the text ( in plain page mode ), then you do "GOTO" -> "HEADER", and a pop-up window opens with the parameters you need ( Text name, language, text id, text object ).
The table "t_tdline" contains the entire text .
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    id                            = w_id
    language                      = sy-langu
    name                          = w_name
    object                        = w_object
*   ARCHIVE_HANDLE                = 0
*   LOCAL_CAT                     = ' '
* IMPORTING
*   HEADER                        =
tables
    lines                         = t_tdlines
hope this helps.
Erwan.

Sales office authorization check in customer master,Sale order and billing

Hello Experts
We need to restrict authorization for customer master, sale order and billing based on sales office.
Can somebody guide me how to activate this ? Has anyone of you have successfully done that?
Regards
kumarlib

Hello Kumar,
User authorization is within Basis expertise, but if you want to get some feel for what authorization objects are take a look at trans SUIM. But basically how it works is for a given transaction the level of check is specified -- in this case Sales Office. Based on values stored in that field the user is allowed or not allowed transaction access.
So you determine whatever the needed matrix is for authorization restriction (i.e. user A can access Sales Office xxx, user B can access Sales Office yyy & so on). Also give Basis the transaction codes to restrict, along w/the technical table/field for each (like from customer master - KNVV-VKBUR, from sales doc level VBAK-VKBUR). Basis sets up the authorization object w/assignments to the users accordingly.
This is standard SAP & your Basis support should be familiar with it. Good luck.

Difference amount in sales order and billing document (For one line item)

Hi Experts,
User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check in sales order condition I found that VPRS condition is used and the value is 692.13and the amount is 3245.26in sales order. But if suppose I check the same value in billing doc the value is 0.69 and the amount is 3245.28. Can u suggest me which configuration I have to check for this.
I also checked change lock but there is no change in sales and billing document & Material
Regards
Sunina agarwal

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Cost in Sales Order and Billing not match

Dear all,
I am facing a problem that the cost in Sales Order and Billing (order-related billing) not match.
The error seems related to sales order is getting moving price (MBEW-VERPR) as cost but billing is calculated by issued amount / qty.
Here's the detail (refer to the screen captures).
Sales qty = 1330 PC.
Local currency = HKD, sales doc currency = RMB, exchange rate = 1.26215.
Condition type ZCSR, condition category = G (Internal price).
When creating sales order ,
Cost is take from MBEW-VERPR => 1.86 HKD
Cost converted to doc currency => 1.473 RMB => 1.47 RMB
Total amount = 1,330 x 1.47 = 1,955.10 RMB
When creating billing from the delivery note,
Cost seems taking from total value divided by total stock in the article doc.
Cost = 2,477.82 / 1,330 = 1.863022556390 HKD => 1.476 RMB => 1.48 RMB.
Total amount = 1330 x [(2,477.82 / 1,330) / 1.26215] = 1,963.17 RMB
My goal is to align the same cost and amount in sales order and billing.
Please help.
Thank you very much.

Dear joan,
Thank you very much for your advise.
I implemented example 1 as in note 24832, trying to disable price re-determination in billing.
However it doesn't work.
Added code in example 1:
Copy control Delivery type LF to invoice F2, pricing type changed to X:
Still ZCSR re-determined but not copying from sales order (1.47 RMB):

How to Avoid Duplicate Pricing Condition Types In Sales Order and Billing

Hi SAP Gurus
I have a requirement in Pricing (Sales and Distribution). We have issue duplicated condition types in Sales order and it causes wrong posting in to accounts.
I want make them inactive duplicated Condition type in Sales order and Billing Documents.
Please advice me how to make inactive status to duplicated Condition types
Thanks in Advance.
Ravikanth

Hi
You can use Exclusion Group
You can define 2 Groups and include 1 condition type in each
and define exlusion procedure
A   Best condition between condition types
B   Best condition within the condition type
C   Best condition between the two exclusion groups
D   Exclusive
E   Least favorable within the condition type
F   Least favorable betweent the two exclusion groups
you can use Exclusive to set your condition type or as per your requirement
Regards
Jitesh

Update KOMV-KBETR field for sales order and billing

I would like to update the KOMV-KBETR (condition amount or percentage) under condition tab for both Sales order and billing.
example:There are two condition types ZA00 and ZB00 and need to get the KBETR value from ZA00 and add it to KBETR value of ZB00 and update the sum in KBER value of ZB00.
1. creation of sales order & billing.
2. Change of sales order & billing.
3. For single & multiple line items in both sales order & billing.
4. during updation of price in the change mode of sales order & billing.
5.When user click on Update button in the condition tab(i.e., when clicked on Carryout new pricing)
I tried with the VOFM routine but as the routine is triggering multiple times the sum is calculated again and again.For that I set flags also.It is working for sales orders but for billing creation the field XKOMV-KBETR is cleared after this routine.
So I would like to know are there any EXITS for this scenario or any one entountered the similiar issue which I am facing.

Hi Brad,
It is an Client requirement.So need to do the addition of that condition types.
Can you please let me know the configuration point where we can do it and the condition type which we need to update the Rate/Amount value.ie., KOMV-KBETR is and Price list value and not the subtotal one.
Thanks,
Srilakshmi Lagisetty.

CRM - R-3 integration for sales order and billing

Hi All,,
Please could you help me to set up the connectivity between CRM and R-3.
This will be for Sales order and billing.
Regards,
Piyush

Hi All,
Thanks for your information.
I have created a site, subscription, connectivity is established between R-3 and CRM through RFC destination.
What else do i need to do, Could you please share step by step information for the whole scenario 'Sales order in CRM to R-3 and Billing info from R-3 to CRM ?
This will help me a lot to do things.
If you have documents for this please mail me at [email protected]
Regards,
Piyush

Sales order and billing document modify log

Dear Gurus,
I would like to know if there are any standard report with Sales order and billing document modifies by a user.
I know that you can see modifies by going to VA03/VF03 -> Environment -> Changes. But this report is too poor.
Thanks in advance.
Best regards.
Juan

Tcode AUT10 is the best one Here, maintain From-To date and TCode and execute.
thanks
G. Lakshmipathi

Sales order and billing document fields

what are the fields for sales order and billing document dates?

Hi
Couldnt really get the exact requirement:
1. If Billing Dates are to be extracted from Sales Documents, we can do that by extracting field FKDAT from table VBKD.
2. If it is Billing Document creation date, extract from VBRK-ERDAT with below condition.
select vbrp~vbeln vbrp posnr vbrp~aubel
 vbrp~aupos vbrk~erdat into table itab
 from vbrp as a
 inner join vbrk as b
 on vbrp~vbeln = vbrk~vbeln
 where vbrp~aubel in s_vbeln. "Sales Documents
 Hope this gives you some idea.
Kind Regards
Eswar

Variant configuration statistics of sales order and billing document

Is there any transaction that allow me to get statistics from the sales orders and billing document for configurable materials ? (like VA05) better if using the values of the characteristics that make up the positions of order.
Thera are any information from "Sales Information System" using LIS?
Thanks.

Hi,
With LIS, we'll find different infostructures.
See this link to configure LIS reports :
http://help.sap.com/saphelp_47x200/helpdata/en/c1/375723449a11d188fe0000e8322f96/frameset.htm
Using many infostructures before to see sales analysis.
Another solution :
In sales order (by user exit), copy characteristics in new fields in VBAP.
Then, you can use these fields in VA05 (add user exit) or new ABAP report.
Regards,
Lionel

Regresion test flow of Sales order and billing document to CO-PA

Hi
In the regresion test we need to test the sales order and billing documents values are flown to CO-PA are not.
May i know the transaction codes to test this scenario
Best regards
Thomas

Hi
1. Your sales ordre will have a pricing procedure in it.. Pricing procedure has condition typess. for revenues and discounts. Did you assign cond types in KE4I to your value field?
2. Also, if your pricing procedure has cond type VPRS, this will contain the COGS.... Assign VPRS also to a value field in KE4I
3. Check If you did the settings in COPA for
a. Select Valuation Strategy 001 in KE4U
In DETAILS tab: Assign it to Appl = KE, Check Mat Cstng, and Qty Field = ABSMG
In Assignment tab: Assigning 001 to Point of valuation 01 and Record Type = F
b. Creating a costing key in KE40
Check : Transfer Std cost estimate
Period indicator =Current Cost estimate acc to entry in mat master
c. assigning costing key to material types in KE4J or KEPC and
d. assigning Cost Comp Structure to Value field in KE4R
Regards
Ajay M

Different Pricing Procedure for Sale order and Billing Document

Hello Experts
As per scenario,we create Excise Invoice (T-Code J1IIN) on Basis of Proforma Invoice.Proforma Invoice and Excise Invoice follow Pricing from Sale Order.AS per pricing Some excise condition types are get update in Proforma and excise Invoice.
AS Per Customer Payment Confirmation we Create Export Billing Invoice (T-code VF01) on basis of Outbound delivery.
Issue -: AS per export Billing Rule we don't want to update Excise Condition type in Export Billing Document,and at same time it should not create any accounting entries for same condition type. we Dont want excise Duity in Export Billing Document as Export Billing Doccumnet aslo Follow Pricing procedure of Sale order
Should i create new Pricing procedure or what other things to solve above issue.
Please help me out
Thanks and Regards
Pash@SD

Hello,
The key to your requirement can be maintenance of Excise condition type with proper access sequence and accordingly maintain condition record for them.
You create an access sequence with following access:
- Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp / Materia
- Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp
- Country / Plant / PlntRegion / Region / TaxCl1Cust / Mat.pr.grp
- Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp
For export maintain condition record based on any key combination, say for
Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp - Tax % - Tax Code
FR / 1000 / KR / 03 (EXPORT) / 04 / 0% / V1
I hope this can assist you.
Thanks & Regards
JP

Sales order to be blocked based on customer payment terms and credit limit

Hello Gurus,
We have some requirement of credit management : Client want sales order to blocked based on payment terms if customer doesn't pay previous dues as per the payment terms mentioned customer master ,sales order , irrespective of customer credit limit credit
(i.e Even in the case of credit limit is not exceded for that praticular customer)
Looking for your inputs
Thanks inadvance
Regards
Venkat

Dear Venkata Chalapathi,
Following is the logic for your requirement.
If the check is on the basis of payment terms of pending billing documents alone, then
check DYNAMIC with Reaction C/D and Status 'checked'
Then maintain the same settings against OLDEST OPEN ITEM with Days oldestItem = 0
Now, make a sales order and system will trigger the credit check message (assuming there are uncleared documents )
Ask your abaper to find an Exit/Enhancement in this message spot and you can write a logic to check the
billing documents in BSEG by fetching the document types with 'RV' (assuming we are considering only the billing documents)
and in the VBRK get the billing date and we can get the payment term in vbrk-zterm and its corresponding date in T052-ZTAG1
If the billing date + T052-ZTAG1 value is greater than SYSTEM date , then you have to trigger the credit check message in the sales order. Else allow the sales order.
Check and revert back if there is any doubt/additional requirements.
Thanks & Regards,
Hegal K Charles

Sales order and Billing Should be Block as per Customer Payment Terms

Similar Messages

Maybe you are looking for