Sales Order BOM IDoc Steps

Hi all,
I am new to IDoc and got a requirement where I want to mass update the Sales Order BOM in SAP. I have to use the IDOC type BOMORD01, message type BOMORD with the inbound function module IDOC_INPUT_BOMORD in order to mass create Sales Order BOM. I have been provided input file with following fields:
Order Number     
Item Number     
Material      
BOM Usage     
Item Category     
Components     
Quantity
Indicator (Create/Delete)
Could you please tell me the steps-by-step approach with TCODES?
Thanks in advance.
Regards,
Balaji Viswanath.

Hi
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
• Create a Customer Distribution Model (CDM);
• Add appropriate message types and filters to the CDM;
• Generate outbound partner profiles;
• Distribute the CDM to the receiving systems; and
• Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC – Creating IDoc Type from Change Pointers
RSEOUT00 – Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Regards
Anji

Similar Messages

  • Creation of sales order via IDoc ORDERS05 - specify a reason of rejectio

    Hi,
    I want to create a sales order via IDoc (type:ORDERS05), i specify for an E1EDP01 segment a reason of rejection (ABGRU),
    The sales order is created succefully by calling the FM IDOC_INPUT_ORDERS but the order quantity of the item where i have specified a reason of rejection is equals to 0.
    Is this normal? i want that this will take 3 value either 0?
    Could anyone help me?
    Thx

    Hi,
    Thank you for ur answer.
    I've followed the procedure that you have explained and the Quantity 3 have been succefully passed to VA01 but is set to zero when i execute the next OK-CODE (=UER2, i think it is llike Enter button ). I simulate the same procedure by creating a sales order on VA01 and i've finally found the problem : at item level, if i enter the Material (MATNR), the order Quantity (KWMENG) and the Reason of rejection (ABGRU), the quantity is set to zero after clicking the enter button ; but if i enter only The material and The quantity followed by enter button, and enter after the Reason of rejection, it works fine, the Quantity doesn't change.
    What is the solution that you propose to me?
    I've try this one on debugger mode:
    The FM which interpret the Idoc create the sales order by CALLING TRANSACTION 'VA01' USING bdcdata....
    I've modified the bdcdata to implement the sequence of the steps before (MATNR + QTY <ENTER> ABGRU <ENTER>).
    1. Is it possible to code this modification?
    2. Is there a way to structure the Idoc for having this sequence in bdcdata?
    Thanks in advance!
    Narivelo

  • Plant change in Sales Order not possible due to Sales Order BOM

    Hi all,
    we are trying to change the Delivery Plant in a Sales Order after the creation of a Sales Order BOM, but it gives a V1773 message first, then a blocking error V1810. The same happens with a Production Order.
    How can we change the Delivery Plant after the creation of one of these objects?
    Our scenario:
    - Make To Order
    - Sales Order BOM created with transaction CS61
    - Sales Order Routing created with transaction CA01
    We need to create the Sales Order BOM on the Production Plant (which doesn't change), but we need to be able to change the Delivery Plant in any time.
    Should you have further questions, feel free to ask.
    Thanks in advance,
    Giuseppe

    Hello Caselli,
    For V1773, please check the solution provided by note 588884, which is a modification. With this note it turns possible to delete all multi-level sales order BOM using transaction CSKB, which may be useful.
    The behavior mentioned by you is the standard behavior of the system. The scenario works as designed, a plant change is only possible as long as there is no other document assigned to the sales order.
    Longtext of V1 810 says:
    The plant can no longer be changed in the following situations:
        2. There is a production order for the order item but it is not a static assembly order.
    Your scenario seems to be point 2 as mentioned above. You can check the requirement type (VBAP-BEDAE) and requirement class in OVZH and assembly type (MNTGA) in OVZG.
    If you change the plant for the items with existing production orders, it will cause the incorrect values in the COPA. An order item is assigned to plant A and the corresponding production order exits. This
    means that the costs are assigned to plant A (this is the place where the costs accrue). Order and production order will be balanced at plant A.
    If you now, after the process has already started, should allow to change the order to plant B the following examples of problems will come up:
    - The costs accrued in plant A (see production order)
    - The SD order is now assigned to plant B, this means billing will be with plant B
    This leads to the fact the costs are on plant A, plant B has a benefit. Plant A cannot settle the costs and plant B has unexpected earnings. Inconsistencies in all involved process steps, SD, CO, COPA are the results.
    If you want to change the plant in the sales order you'll have to perform these steps:
    = Delete the production order.
    = Change the plant of the sales order item from A to C.
      This should be possible unless there are other documents which are already assigned to this sales    order item. Save.
    = Create a new production order and assign it to the sales order item again.
    I hope I am able to help you with this information.
    Best Regards,
    Bhavin Joshi

  • Creating sales order using IDOC - Delivery hour

    Hi,
    i've a problem to solve. when creating a sales order i need that when the segment is E1EDK03 and the IDDAT is 002 i need to extract the delivery hour and insert it in the table vbak-vzeit, now what i'm doing in the exit EXIT_SAPLVEDA_001 is:
    DATA: hour LIKE vbak-vzeit.
    CHECK segment-segnam = 'E1EDK03'.
    IF segment-sdata(3) = '002'.
      hour = segment-sdata+11(6).
    ENDIF.
    and now i want to acess the value in hour in the exit EXIT_SAPLVEDA_002 to put it in the dxvbak struct tha i think that is the table correct to then internaly fill the vbak. the problem is that the variable hour is not available in the exit EXIT_SAPLVEDA_002. i do i do to pass the value that i want from the exit EXIT_SAPLVEDA_001  to be available in exit EXIT_SAPLVEDA_002  and then insert that value in the right place to fill vbak.

    Can u tell me the steps to create a sales order using idoc, i've created a bapi but thats a temprory use. I wanted to created a sales order automatically when a purchase order is saved.
    Please let me know if u can help me, i wanted to do it using idoc
    Regards
    Sanju

  • Sales order BOM

    Dear Gurus,
    How to create Sales order BOM ? please give me in details.
    Can we use existing BOM to create sales order BOM?
    Thanks & Regards
    Harish

    Hi Harish ,
                       You can not use/convert  the existing BOM as sales order bom ,
    To create the sales order BOM follow the below steps
    1) Create the sales order
    2) Go to t-code cs62
         Enter the sales order , IKtem number , finished material and choose the bom usage as 5 (sales and distribution )
    Enter the raw materials and required qty -
    > save the bom .

  • How to compare sale order bom and production order bom.

    i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

    Hi,
    Check Tcode:CS14 to SD/PP BOM's
    Chidambaram

  • Sale order bom

    dear sir,
       can you tell be how to create sale order bom(master bom) from the beginning. please give detailed process right from creating sale order. my requirement is to have a single bom which can be changer according to customers requirement
    tahnking you
    arun kumar .r.v

    Hi,
    We need to maintain Material master records for the BOM Item and for the components also.
    The <b>item category group</b> of the BOM items should be <b>‘ERLA or LUMF’</b> and the item category is ‘NORM’.
    To Creating BOM item: Tcode - CS01 
    Specify the data for the following fields.
    Material: Specify the material for which components are to be maintained.
    Plant: Specify the plant of BOM item.
    BOM usage: Specify the application in which BOM is maintained (5 for SD).
    Alternative BOM: Specifies the sequence of a BOM within a group of BOMs.
    (L = stock item                  N = Non-stock item)
    In the overview screen specify the components which makes the main item and the corresponding quantities and save it.
    Note: During sales document processing if we enter the BOM item the system automatically determines corresponding components.
    I   *For the BOM to be exploded in the sales document the following customizing  setting is required.
    A) If the item category group is ERLA the item category of the BOM is TAQ, in the definition of which we have to specify the value A (Explode single level BOM) in the structure scope.
    B) If the item category group is LUMF the item category of the BOM item is TAP in the definition of which we have to specify the value A in the field structure scope.
    II   If the item category group is LUMF the system shows price for the components but not for the BOM item. For this the following customizing setting is required.
    A)     The item category of the BOM item is TAP which is not relevant for pricing, so the BOM item is not Priced.
    B)     The item category of the components is TAN which is relevant for pricin! g, so the components are priced
    III        If the item category group is ERLA the system shows price for the BOM item but not for components. For this following customizing setting is required.
    A)   The item category of BOM item is TAQ, which is relevant for pricing, so the BOM is priced.
    B)    The item category of components is TAE which is not relevant for pricing, so the components are not priced.
    While creating sales document to get the list of alternative BOMs in the definition item category of BOM item we have to check the field “Manual Alternative”
    Rewards if this helps you,
    cheers,
    RC

  • Sale order bom can be used in to process order or not

    To change the BOM for particular order items the sale order BOM can be created , to copy the sale order BOM into production order CO08 can be used , whether the process order can be created with ref to sale order any option is available is SAP

    Hi,
    There is no such transaction for process order with respect to Sale order.If planned order is created with respect to sale order after MRP,that can be converted to process order thorugh COR8 transaction.
    try to explore COR8 transaction

  • Problem when setting Reason of Rejection for a sales order using IDOC

    Hi All,
          I am working on a requirement where i need to put a reason for rejection as 'Item Cancelled' for a sales order via IDOC 'IDOC_INPUT_ORDCHG' in a third party scenerio where the PR is created automatically from the sales order . When the IDOC is run in the foreground I get the information message Subsequent function  " 'Purchase requisition from sales document' not possible Item & was rejected "(Message V1579) and the IDOC results in a error when run  in the background mode because of the same information message. The message should not appear when a sales order is being processed in the background but still the message is being displayed . Is there any way the message can be suppressed ? Thanks in Advance.
    Regards,
    Sowmya.

    can you send the program how you create a so or po using IDOC, as i've a assignment creating PO using IDOC & then creating a sales order of the PO. and i dont know how to create a IDOC. SO IF you have sample program it would be help full
    Thanxs

  • Configurable Material as BOM component in SALES Order BOM

    Hi Gurus
    I have following
    1. Material ABC is a configurable material (variant)
    2. BOM of this ABC has further configurable materials
    Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
    If yes, how. please explain.
    Thanks in advance
    sunil

    Dear Sunil,
    Please refer to the following link:
    http://sap-img.com/sap-sd/sales-bom-implementation.htm
    I will suggest you to visit  http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Do let me know in case of any queries.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • BOM changes reflecting in sales order BOM of delievery completed materials.

    Hello gurus
    i am explaining my requrement. My scenario is like this.
    1.creating sales order
    2.reating sales order BOM
    Next production peole will create production order and will do confirmation of order and Goods reciept.
    3. after this sales people will do delivery of the materail.
    For example yesterday i have delivered one material X.
    Today if i change the super BOM of the material X, these changes are reflecting in the sales order BOM of yesterday delivery done material X also. My client want to restrict thise changes. Pl help me how to resolve this ?
    regards
    srao

    Hi Brahmankar
      we checked for User exits we didnt find. Can u help me out on this regard.
    Can we lock the sales order BOM ? means if we do any changes to super BOM assly level also, these should not reflect to sales order BOM . pl guide me
    regards
    srao

  • Sales order BOM is not reflecting in sales order

    Hi Guys,
    I have created a sales order in which all the items of the sales BOM (ex:A-a1,a2,a3).have been exploded.My strategy is make to order and i am dealing with valuated stock.
    Now i have created sales order BOM for that particular sales order thro cs61.I have made some changes in the item level (ex:A-a1,a4,a5) in the order BOM i want these changes to be reflected in my sales order is there any way to do so...
    RAMASWAMY

    Dear,
    You have to configure BOM explosion in VOV7 - item category settings - BOM area and you can specify whether it is a single level or multi level explosion etc., Depending on the configuration made here, the BOM explosion takes place in the order.
    Regards,
    R.Brahmankar

  • Problem in cs61 sales order bom

    Dear sir
    i created  sale order for  item 100  x matrial and item 200 y material ,sales order no 1234.for this sales
    order i want to create sales order bom by cs61 . when i create this the system should allows item 100 for x matrial and item 200 for y material for same sales order . but if  i give  material y for item  100 and material x  for  .200also the system allowing to create the sales order bom.this will effict the bom .
    so system should not allow to create the sales order bom when i give wrong material to item .
    pl give me correct solution for above problem
    regrds
    Baswa

    Baswa,
    when you create sales order BOM through CS61 its all together new BOM specialy meant for that sales order - material combination.
    To create it you can take referance of Material BOM , but there is no such functionality to restrict the componet changes or quantity changes.
    The CS61 its self is meant for creating customer specific BOM , which can be all together different from Material BOM. as in many business its required that , we need to modify our existing BOM on customer request to incorporate that customer specific changes. For all other things standard BOM is there in system and its not affected by this new customer specific BOM.
    If you need further help , discribe your need of creation of sales order BOM.
    Hope it helps you.
    Regards
    Ritesh

  • Creating material bom with reference to Sales order bom.

    How to create material bom by coping Sales order bom.?

    Mayur,
    Just go to T code: CS01 use BOm  usage 1 & then select the copy from icon in the menu bar.
    On the popup screen enter material no, plat , bom usage =5 (sales bom).
    System will then allow you to select items from Sales bom. Select the items you need copied to Material BOM. Then save.
    Hope this helps.
    Thanks,
    Ram

  • ERROR IN CREATING SALES ORDER,USING IDOC TYPE ORDERS05

    I am using exit to write my code for creating sales order of IDOC Type ORDERS05 and order type ZDRX.
    IF I proceess the Idoc in background each time error message comes
    FIELD kuwev-kunnr(ship to party)is not an input field.
    but if i run in foreground in debugging mode,sales order is getting created..
    please suggest something.

    If thats not working..
    try BAPI_SALESORDER_CREATEFROMDAT2
    If BAPI is not working. try creating a bdc for the same if there's not error on trying from VA01

Maybe you are looking for