Sales order costing error found in quotation 2 order line items created in
Sales order costing error found in quotation 2 order line items created in quotation 5000562
1st line item with third party
2nd line item with PTO
Purchase price was entered in the configuration screen
1st item : 2,000 EUR
2nd item: 1,200 EUR
Purchasing info record was created with variant condition for EUR
Error in sales order costing:-
System does not take the purchase price in the configuration screen to
calculate sales order costing. It incorrectly took 1 EUR from variant
condition in sales order costing for both items.
By right, it should take purchase price from configuration screen.
Pls advise
Thanks
no replies and my thread was dead.
Similar Messages
-
Sales Order costing error to prevent Plan Order generation in MRP run
Dear PP Experts,
We are into sales order costing due to Variant Config implementation.
Problem Statement: After sales order entry /Characterisitc value selection, while saving sales order , SO costing is auto triggered. Many a times one of the new Raw material price is not maintained( Purchase info record), hence SO costing occurs. SO costing is still saved, SO incompletion is not configured , so it is detected when Production order has 'No Target Cost'. This creates inconsistancy in FI postings.
My questions
- Can we set SO imcompletion for SO costing error( Standard Config?)
- Is there a enhancement to prevent MRP from processing Sales order with incompletion log i.e. Prevent MRP from generating Plan Order.
Best Regards,
JatinHello Jatin
You can use BAdI MD_CHANGE_MRP_DATA to make the sales order not relevant to MRP.
Check the following document for an overview of the BAdIs available on MRP:
BAdIs for MRP
BR
Caetano -
Hallo friends,
I am getting sales order costing error and it does not allow us to delivery through VL01n. Error shows :
Object was not costed
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
Items in the BOM
Display BOM
Operations in the routing
Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.
Kindly give me urgent solution.
Thanks & regards,
SamratHi
You can just mark your thread as answered
regards -
Sales order cost objective vs OKB9 Internal order cost object.
Hi All,
we facing an issue with sales order cost objective vs OKB9 cost object.
For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
The G\L account 7898788, we assigned to Service Item (material type DIEN) , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
Now conflict with sales order cost objective vs OKB9 internal order cost object.
While posting intercompany IR posting system thronging below error messageu2026
Enter only one true account assignment
Message no. KI249
Diagnosis
You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
System Response
You are allowed only one account assignment for each cost-relevant account
How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
Or any sub account to assin in VKOA config for internal orderu2026
Regards,
AdiHi Waman,
Thanks for your inputs.
Issue : IR failed to post for wax Sales Order -> ICPO - Error: Enter only one true account assignmentu2019.
Background:
Original setup in Test system & Productionu2013 account determination for servive (DIEN) account assignment category u20184u2019 was linked to G/L Account 34444444, As part of project orange u2019, account determination was linked to account u201889710100u2019.
Account u20188970100u2019 34444444 was replaced with 8970100 ,is not linked to any cost center & always post with reference to IC Sales Order as per config in OKB9 based on company code (US99) + cost element (89701100) + business area (9yyy). This caused a conflict while posting IR, system could not determine exact order for posting financial value.
Conflict: Actual Sales Order 34789343 is linked to PO via account assignment category & IC dummy sales order (8014331) is determine via config setting. Two cost objects cannot be linked to one IR G/L account booking.
Regards,
Adi -
Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03
Hello everyone,
I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Due to the error, we changed the settlement rule following these directions:
1. Remove the settlement rules that we had so we can start anew.
2. Choose the first line item and click on "Final Settlement".
3. Enter the necessary settlement details (total should equal to 90,000 only).
4. Go back and save.
5. Choose the second line item and click on "Final Settlement".
6. Enter the necessary settlement details (total should equal to 30,000).
7. Go back and save.
8. Then, check again the distribution rules set.
Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
Thanks in advance.
Best regards,
Peterhi,
check in SAP OSS with the message number you get is there any SAP Notes tobe applied. -
Item cost not found for one or more items - Inventory Posting
Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
SeanHi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean -
Report for bom wise target and actual cost as well as qty at line item
Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RKDear experts,
I am still looking for a revert.
regards
RK -
Two line items created while doing sales excise invoice
Hi all,
I have created an excise invoice through J1iin. But when I do so, there are two line items created for BED on excise paid. where as ideally there should only be one line item created.
The standard entry should be as follows :
Excise Duty BED Paid 617.00
Excise Duty SEC Pay 6.00-
Basic Excise Duty p 599.00-
Excise Duty ECSPay 12.00-
In my scenario the entry is as follows :
Excise Duty BED Paid 181.00 here there are two line items created.
Excise Duty BED Paid 436.00
Excise Duty SEC Pay 6.00-
Basic Excise Duty p 599.00-
Excise Duty ECSPay 12.00-
can anyone help on this?
Thanks
Priyanka
Edited by: Priyanka Patwardhan on May 19, 2011 12:35 PMHI,
Check the below settings are exist or not at your order to delivery copy controls.
Order requirements 001 Header
Combination requirmt 051 Combination
Header Data 001 Header
Header Data Ext. Sys 0
Handling Units 000
check and revert
Regards
Ram -
In COGI error text "Multiple assignment of line item"
Hi Guru,
In COGI error text "Multiple assignment of line item"
Description:
ultiple assignment of a line ID
Message no. M7357
iagnosis
An item table, in which the line ID (LINE_ID)
was transferred to the function module MB_CRE
ystem Response
Processing is terminated.
rocedure
Contact the system administration.
rocedure for System Administration
There is an error in the calling application.
Please help me to resolved this issue.
Thanks and regards
PNUHi,
Thanks for reply,
It is possible to remove material from COGI list. We need to stop creation of this error.
Is there other solution to control creation of error "Multiple assignment of line item"
Thanx & regd.
PNU -
Sales Order Costing Error Log Display
When I look at Sales Order costing thru VA03 or when I run the Multi-level BOM costing for sales order CK87_99 I can not display the costing error log. I can generate the log thru VA02, but we need to limit the Sales Order change transaction to the Order Management group and did not want to give change order access to the product cost group.
Any options to get the costing error log from VA03?
ThanksI cheeked OKY9 and the Update tab had the "Save Error Log" checked, but on the Misc tab the "Log Messages but do not save" on the error message field was selected. When I changed the selection to "Log and Save Message" this corrected my problem.
Your suggestion guided me in the right direction. Thanks, -
Dear All,
I am getting an error at the time of release of prodn order CSER i.e. system is giving planned cost calculation error.Pls. help in this regard.
r sehgalHi
What COSTING errors you are getting.,Please go to menu
Goto->Logs->cost calculation..
and send the error message,, so that we can reply specifically..
Regards,
MSH -
Cost Center Error in Shopping cart Multi Line items
Hi,
We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
"you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
We have given the access to that cost center in SRM even also he is getting the same error.
He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
Request all please advise me where i need to check to overcome the issue.
Regards,
SriHi,
Thanks for your kind response. can you please elaborate bit more step by step.
Awaiting for your feedback.
Regards,
sri -
BAPI for Ordered Quantity updation for PO after PO line item cancellation
Dear Experts,
I am trying to cancel a line item in ME22N for a particular Purchase Order. When I cancel an item, the ordered quantity is updated in the Status Tab for Header Details. I want to know how is this quantity getting updated and which BAPI is triggered for cancellation. Is it simply adding up the quantities for all line items?Header values are addition of line items at run time. I doubt any BAPI specifically calculates it at the header
-
We have a strange issue. We are creating Service Purchase Orders by using BAPI_PO_CREATE1 function module. The source for creating PO is a Z table wherein it contains approximately 1000 records. We create one PO per Vendor and all POs are creating successfully but strangely GL account number and cost centers are missing in every 100, 200, 300, 400, 500, etc. line items and have NO issue with other line items. Our purchase order line item interval is 1 which means at every 100th line item we have an issue in missing GL account number and cost centers. We also checked by changing line item interval to '10' and still we have issue at every 1000th line item.
We searched for OSS notes but no luck. Did anyone come across this kind of issue ? Could you please advise.
Regards,
Krishyou can either share your code and your source file to have the people check if the error is on your part or you can directly contact SAP if you are the opinion that it is an error in their BAPI code.
But without looking at code and source file it is not possible to do any evaluation except you are looking for clairvoyants -
Defaulting of a product in quotation at line item
Hello Experts,
I have a requirement that ,when i create a quotation a particular product should always get added up at line item 10 by default.
Its required so that the user doesnot have to enter the Product.
Is there any way we can default the same product as soon as the qutation creation transaction is openend up for creating a new quotation.Apart from item Proposal, where you need to create a sales doc and manually propose(CTRL+F11) them in sales order.
You can use Dynamic Product Proposal.
in IMG, follow following path for configuration:
SPRO - SD - Basic Functions - Dynamic Product Proposal
You might need to activate "Default product proposal" field in Slod-to Party customer master - Sales data - Sales Tab.
With this system will automatically propose a list of products for a specific customer during sales document processing. This really entry help and an aid to sales team, b'coz in some industry the ordering partten don't change for some specific customer. So, this will display/propose list of material as soon as you enter the customer in allowing sales doc type.
Regards
JP
Maybe you are looking for
-
I changed my Apple ID today, and now I can't log into the App store because my devices just prompt for my password, and I am not offered the opportunity to enter the new ID. HELP !
-
How to add multiple passbooks cards to a single mail
im trying to add multiple passbook cards to a single mail on iphone how can i do that.... the upload or share tab in passbook card only allows one card at a time on my iphone... pls help...
-
Using dimension properties in LOOKUP
Hi, I'm trying to use dimension properties in a LOOKUP, but when I execute the script the log tells me that COMPANY, SALESORG, PRODUCT and TRANSCURRENCY is not defined and therefore create a lookup on all members. THe usage of properties in LOOKUP is
-
I am trying to sync my iCal calendars across platforms (Macbook, iPad, iPhone), but I cannot figure out how to create a calendar on my Macbook on the cloud. Whenever I create a calendar, it seems to save it to my computer and not to the cloud. (Thus
-
My laptop speaker Icon will not unmute upon clicking it and unmuting the usual way. It says audio device is disabled. How to I fix it.