Sales order creation, Line item error

Hi....
Iam created one sales order with BAPI techniue.i.e type stand alone order.
After creation VBELN generated successfully.
Now, if i save the order from VA02 it was displaying following message in popup window...
LINE ITEMS HAVING NO QUOTA OR TERM ATT
Item Material Description
10 1111-0 ABCD FR
And.,
In the conditions tab of the line items I want to insert a row i.e contract type and amount..,
But..,
for this Iam paaing entries as input to BAPI but not mapping on screen..,
Also if i try to add them mannually showing following error..
Requirements are not fulfilled for condition <given type>.
As an abaper Iam not able to solve this problem, also functional people not availble here..,
Any updates.......
Thanks,
Naveen.I

Hi,
This is due to the requirement routine assigned to the condition type in pricing procedure.
Goto Tcode V/08.
Here enter you pricing procedure. You can find it in sales order header : Tab - Sales (Pric. procedure)
Enter this pricing proc in V/08
When you select the procedurew & double click on control the procedure will be displyed
Now look for you condition type & look in the colium "Reqt".
Some number must be assigned, look for the logic inside the routine. If the requireemnt in logic is noit met the condition will not be populated
Hope this helps you
Regards
Dhananjay

Similar Messages

Price is not changing in sales order in line item

dear all.,
price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
Regards,
Praveen

Dear
You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
Did you enter the pricing date , prcing condition and press enter , so that it should pick the correct price?
Check this and come back
Regards
JH

Sales order some line items are showing not relavant

Hi SD Guys,
In sales order some line items are showing not relavant.
Why are they showing a status of not complete or "not relevant"?
Thanks
Sunny

Hi sunny,
plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
regards,
ram.

Locking Sales order and line item from reading

Hi,
I am writing an interface program to create an offer list inspection report. If two users are running the program at the same time, and if the first user read and processing a sales order line item, it should not read the same sales order line item twice for the second user.
Please let me know if anybody has used locking sales order at line item level (VBAP).
The enqueue function for VBAP is not working.
Any suggestions will be helpful.
Regards
Ravikanth

hi Ravi ,
u Can lock the Sales Order for processing , u cannt restrict users @ tables level.
u hhave to enqueue the VBELN
Regards
Prabhu

Bdc sales order multiple line items

hi friends,
i prepare multiple sales orders multiple line items through single flat file
in bdc program.
i know information about ...
H
I
I
I
BUT my problem is
H
I
I
H1
I
I
H2
I
I
how will develop this code?

George Bush,
Answer fir this question is, you need to do basic ABAP Training.
Search for SAP ABAP Training Courses.
You need to build logic in you program by defining appropriate internal table and use loop events to build BDC. BDC is old style of programming. I would advice you to use BAPI with immediate order processing.
If you want BDC, you can also try to use LSMW by defining appropriate inbound data structures.
If you need help let me know.
Thanks & Regards,
Mahesh Apte

Sales order with line items having multiple values in multiple currency

Please suggest solution for creating sales order having line items with multiple values in multiple currencies.
e.g. Line Item A Qty/1 No, value 100INR100$100EUR. Customer wants all three values to display at sales order line item level and create billing in 3 currencies.

Hi,
As far as my understanding it may be possible round the solution,
For 1 company code we can able to maintain 3 currancies,
1 currancy is hard currance & other two are dual currancies.
Create sales order with 3 line items having 3 diffrant currancies
Spilt invoice on the basis of currancy
Last pass to this invoices to accounting.
Whole process is
Sales order >>> Delivery >>> Invoice 1, Invoice 2, Invoice 3(Split invoice on basis of Currancy).
Consult with FI Team they will tell you about dual currancy & hard currancy
Kapil

Get the Ship-to-Party from Sales Order and Line item

Hi all,
I am developing one report in which I want to get the Ship-to-Party for a particular Sales Order and Sales Order Line item number.
I can see table VBPA from I can get value of KUNNAR and so on. But my concern is that can the Ship-to-Party differ for different line items for sales Order, if yes how to get that one, any table or any function module?
In my scenario i found out that ship-to-party only depend upon sales order and partner function not line item.
please help me..
regards,
vikas.

Hi,
First step: Customer Creation (T. Code: XD01)
i) Create Sold to Party (Ordering Party) with Account Group: Sold-to-Party
ii) Create as many Ship-to-Party and Bill-to Party, if reqd, with Account appropriate Account Groups.
iii) Match all the Ship-to-party/ Bill-to-Party/ Payer for the respective Sold-to-Party under Tab: Sales Area data, Sub-tab: Partners.
Second Step: Sales Order Creation (T.Code: VA01)
i) Enter Sold-to-Party at Header Level.
ii) Enter Materials (at Line-item level).
iii) Now, System will pop-up all the Ship-to-Party/ Bill-to Party/ Payer, Matched for the particular Sold-to-Party. Click on appropriate selection.
OR
Now, (if option doesn't pops-up) select the line and Double Click on to the same line. it will lead to the next page. Here, Click Tab: Partners
Now, in Column: Partner Function, search for appropriate Partner: Ship-to-Party or Bill-to-Party or Payer.
Remember: Sold-to-Party will be non-editable as entered at Header level.
Repeat the same for Each Line-item.
Regs,
Amit K. Yadav

How to know the excess stock with in a sales order and line item

Hi,
i am running an MRP against a sales order and sales order line item. the materials are getting planned based on the requirement. but due to some reasons the production orders are confirmed with out consumption of the actual required quantity of the components. so the stock is kept ideal in the sales order though it is not required further.
do to some othere reasons also the excess stock of componenets exist. the PR or POs may also exist for the materials though they are not required further.
i am in need of a report for the excess stock or excess PR or Purchase order for a sales order.
please give me logic to find the excess things in that sales order and sales order line item. the Expensional message 26 is there in stock requirement list . but it does not give the excess quantity existing.
regards
madan

hi rajesh,
thanks for your reply. please tell me the logic to see when only partial quantity of sale sorder are delivered and also when no delivery is made also.
but manufactured and placed in stock.
please tell me the tables to follow and logic of going ahead with them.
regards
madan

Sales Order : New Line Item

Dear ALL
Is there any fuction Module to post New Line Item in Existing Sales Order .
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Dec 25, 2010 4:17 PM

Thanks
But I need to Post New Line Item in Existing Sales Order for Scrapped Quantity .
I checked Function Module BAPI_SALESORDER_CHANGE but I was not able to finfd file din any parameter where Quantity Could be inserted.
Can anyone help

Help on Indent Sales Order Creation - Missing Items in Purchase Requisition

Hi Experts,
We have Indent Sales setup where when we create Indent Sales Orders it will also create Purchase Requisitions. But we have encountered a lot of of missing items in the Purchase Requisition that are in Indent Sales. Have you encountered this kind of behavior? What are the usual suspects (configuration-wise) for this scenario?
Thanks for your Help!

hi,
please check the SCHEDULE LINES for those PR is getting generated and also for not generating.
PLEASE CHECK THE SCHEDULE LINE CATEGORY CONTROL FEATURES on the same
hope this clears your issue
balajia

In a Sales order for line item (SL) the Confirmed Qty & Committed Qty is 0

In a Sales order for a line item (Schedule line) the Confirmed Qty & Committed Qty is 0 and there is no second scedule line
with the Confirmed Qty & Committed Qty (This is a MTO).What could be the reason? Pls suggest.
Thank You
Manoj

Mr.Gupta
Check the Schedule line determination category settings.
It is determined by Item Category + MRP Type.
Pls maintain the relavant entries in that settings. Pls try out the path in the system. Do NOT ask for Tcode.
Regards
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Sales Order Creation from BAPI Error

Hi Friends,
I am using BAPI_SALESORDER_CREATEFROMDAT1 to create the Sales Order. But I am getting an error when I am executing the FM. I am filling the following Information and passing on the information to the BAPI FM. Details:
IMPORT PARAMETERS:
    ORDER_HEADER_IN:
            DOC_TYPE:     OR
            SALES_ORG:   BP01
            DISTR_CHAN:   01
            DIVISION:         01
            REQ_DATE_H: 29.08.2008
            PURCH_DATE: 29.08.2008
            INCOTERMS1: FH
            INCOTERMS2: PALO ALTO
            PMNTTRMS:     0001
            SHIP_COND:    01
            CURRENCY:    USD
TABLES:
     ORDER_ITEMS_IN:
             ITM_NUMBER:    10
             MATERIAL:         XXXX-6
             PLANT:               BP01
             REQ_QTY:          20
             SALES_UNIT:      EA
             ITEM_CATEG:     AGN
             SHORT_TEXT:     TEST MATERIAL
      ORDER_PARTNERS:
             PARTN_ROLE:     SH
                                        PY
                                        BP
                                        SP
             PART_NUMB:      1000
                                        1000
                                        1000
                                        1000
By using the above information, when I am executing the FM I am getting error
EXPORT PARAMETERS
      RETURN:
              TYPE:         E
              ID               AM
              NUMBER    216
              MESSAGE Incomplete address; enter country
But when I am creating it from the VA01 Transaction, I am able to create Sales Order Successfully.
Friends, please help me in this regard.
Yours
Pradeep Goli
Edited by: Pradeep Goli on Sep 8, 2008 2:56 PM

Hi,
I hope the below link will help you.
Help needed with BAPI_SALESORDER_CREATEFROMDAT1 parameters
Thanks,
Khushboo.

Condition types in Sales order creation process

Hi Friends...
While creating the sales order with BAPI,
What is the condition type i have to pass for pricing procedure...
There many condition types for my pricing procedure, which one o have to select...
Some of them are mannual, and other reuired, which one I have to pass?
I want the information related to this condition types.., as here no SD consultant availble for me.
Sales order creation, Line item error
Thanks,
Naveen.I

Hi Friends...
Please let me know is it mandatory to give condtion type while creating the sales order...?
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create my sales order...
http://www.sap-img.com/abap/bapi-salesorder-createfromdat2.htm
Thanks,
Naveen.I

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

Free Goods - Not showing in sales order as subsequent item

Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
Chris

Hi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva

Sales order creation, Line item error

Similar Messages

Maybe you are looking for