Sales Order Creation or change.

Hi All,
I'm doing some validations in the User Exit (Include MV45AFZZ) when SAVE button is pressed in the VA01 or VA02 transaction.In this logic I'm throwing some error messages because of which the screen is being disabled but I want the screen to be enabled for the user to edit the details by halting the SAVE procedure.So can anyone help me regarding this?
Thanks Inadvance.
Regards,
Siva.

The easiest way of doing it to issue 'Success message' ( message type 'S') followed by 'Leave Screen' statement.

Similar Messages

How to trigger an Idoc from Sales order creation and change

We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad Dixit

Hi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj

Regarding UserExit in sales Order creation(VA01), change(VA02)

*Hi Gurus,*
we are having one requirement that we have to change User status at item level in sales Order creation(VA01), change(VA02) according to certain condition( condition is if user status at item level is 'SGUC' then we need to get item category and with this item category we have to find new user status from our custom table).
*So is there any FM or user-exits to set the User Status of the Sales Order Line Item at the time of Order Creation(VA01) or Change sales order(VA02) but before saving.*
*looking for your inputs.*

Check,
In include MV45AFZZ
Routine USEREXIT_SAVE_DOCUMENT_PREPARE
In include RV45PFZA
Check with USEREXIT_SET_STATUS_VBUK , USEREXIT_SET_STATUS_VBUP

Sales order creation, standard event trigger is taking long time .

We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
Regards,
Sushee Joshi

HI,
we have written SWE_EVENT_CREATE in update task
I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
OR
And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
Please check..
Regards
Pavan

Sales Order creation/ change date for the items

I have a unique scenario and i need to get a Report for this
A sales order is created for 4 line items.
Out of these , for 2 line items a delivery is created. I need the sales order creation date and time for these 2 items in a custom report
Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
Also another scenario is the 2 line items go for back order and when we get stock at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
Can any one please suggest how to get this data from the scenarios?
I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes). You can explore these two tables.
thanks
G. Lakshmipathi

Userexit/Badi for vendor or enduser addition/change in sales order creation

Hello Gurus,
I need a userexit/badi that gets triggered on the addition/change of partners in sales orders
I need to make some validations when the user adds/changes the vendor or
enduser in the sales order creation.
I tried many exits that I could find from forum but they were not able to asist.
Any help would be much appreciated.
Thanks in Advance,
Sumit.

Well, if all else fails, USEREXIT_MOVE_FIELD_TO_VBAK will definitely be called when you change partners... but of course it will be called much more often than at only partner changes. Still, internal table XVBPA shows the current partners, so you could compare its content with the earlier state of the table to recognize a partner change you're interested in.
Strangely, the usual Y-table (YVBPA) is not populated, not sure why, otherwise the comparison would be even easier.

Sales order creation/change

hi all,
when a sales order is created(VA01) or changed(VA02), can i know the list of ALL tables which are updated?
i want to know ALL tables which are updated.
can i know a process through which i can get the list of ALL tables which are updated for the sales order creation or updation.
thanx,
shivaa

hi Shiva,
in ST05 turn on SQL trace. Than carry out the transaction, when finished, check the result of the trace, you should see ALL tables whch was either read or written during the transaction.
hope this helps
ec

Change Transportation Zone in Sales Order creation

Hi Gurus,
I am looking for an user-exit to overwrite the transportation zone for the ship-to party while creating the Sales order.
Actually the order is getting created thru IDOC. The segment E1EDKA1 with PARVW 'WE' contains all the data including name, street, city, phone etc. But there is no option(field) to send this transporation zone (LZONE). In the sale order creation program, it is automatically picking it up from VBPA for the customer. I need to overwrite this one with a different value. Is there any User-exit available to accomplish?
For your information its PO-SO process. A KBZI order will be created. Using the PR generated from this order, we need to create the PO that in turns automatically creating an Intercompany Sales Order ( thru IDoc). In this second Sales Order, I need to overwrite the transportation zone based on the initial order.
Thanks in advance,
Vijay.

>
Murphy wrote:
> I modified the value at runtime KUVEW-LZONE. But this values is keep on getting modified by XVBPA-LZONE for the customers...
How about if we modifiy the value of XVBPA-LZONE itself at runtime in Routine either USEREXIT_SAVE_DOCUMENT or USEREXIT_SAVE_DOCUMENT_PREPARE?
See if the values of KUVEW-LZONE or XVBPA-LZONE in our hand in above exit?

Sap afs - how to customize matrix grid in sales order creation

Hello,
can anyone help to understand how to customize the matrix grid shown at sales order creation/change (VA01 - AFS Item overview tab - Matrix entry pushbutton). Here system, starting from inserted material nr, shows all possible combination from material's sales grid. The requirement asks to manage the matrix grid before it is shown to the user.
Thanks in advance for your help
maurizio

Hi
It depends on master data of your material
Max

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Spliting up the G/L account in time of Sales Order creation .

Hi,
I am an ABAPer. Please let me know using ABAP code how to split the G/L account in time of Sales Order creation for a Payment Card.
Shyamal.

Hiya,
Don't have the system before me, but I think the approx path is:
IMG --> Controlling --> Profitability Analysis --> Master Data --> Valuation --> Define and Assign Val Strategies (I think it is KE4U).
Look up the Val Strategy assignments and look for anything with Record Type "A".
Secondly, look for:
IMG --> controlling --> Profitability Analysis --> Actual Postings --> Active transfer of Sales Order Data
Under here, look for any assignments of Condition Types to Value Fields and Quantity Fields to COPA Value Fields (Qty.)
If these are present, they must have been put there on purpose. You should NOT JUST GO AHEAD AND DELETE them. Check why these are there and then check why these are flowing into your COPA report.
Normally COPA reports are defined by Record Type. If you used Record Type "F" in your reports, you should always get the proper PL report. However, if you assigned a combination of "F" and "A", you will find that your Order data is flowing into COPA along with the Billing data. So the third check point should be your report definition. Call up the form for the report you are running using transaction KE35 (Change Mode). Check the definition of the Sales quantity, etc. and look for any flows with Record Type "A". Since the form may be used by others, it is not a good idea to delete a form as it is. Copy the form into another and change the new one. Delete the "A" assignments and see if you get the correct result.
Broadly these are the areas you need to check. But COPA is vast and there could be other areas as well (e.g., KEDR Derivations, or some custom programs (SMOD)) which can trigger flows to COPA Value Fields.
Cheers.

Performance of Sales order creation on Business Suite on HANA

Hi,
I understand that HANA column tables are read and insert optimized. I would like get some clarification on the following scenario.
Assume that in the ECC (non HANA DB) the sales order creation process is taking few hours to complete due to the sheer number of line items and associated bill of materials, serial numbers etc. If the same process is running on the Business suite on HANA system will there be any considerable performance improvement (because HANA column tables are insert optimized)?
Thanks for your help on this.
Thanks
Vinod

Yes Vinod,
that is the general idea.
For more details please have a look at Hasso Plattner's latest book A Course in In-Memory Data Management: The Inner Mechanics of In-Memory Databases.
R/3 updates the row table based on V1 or V2 priorities and writes the changes to the change log tables in the background.
With HANA application we can eliminate the need for the change log tables and table locking, by inserting the changes for particular fields into the columnar tables of the application with a time stamp immediately, and therefore also enabling real-time reporting.
For traditional RDBMS based applications the notion was that the faster read from the row tables which only hold the latest updates justifies the update of the changelog tables. In order to optimize this update process required by the traditional RDBMS-based systems, a single sales document was split into many smaller tables, like for example header table VBAK and item table VBAP and separate status tables for these header and items, which also made it more challenging to build reports on the complex set of individual tables.
Indices and aggregates could be more easily build from the single row records, but on the flipside after each update to the row table, the indices and aggregates needed to be re-build or scheduled for rebuild at a later point in time. Not only the application-build index tables and aggregates, but also the secondary index tables created by the DBA tuning efforts.
Overall tons of overhead especially for business processes with a many updates like sales order re-scheduling based on MRP runs.
With HANA this is no longer necessary as the latest information and the time travel from the columnar store can be accessed instantaneously across all inserts and therefore eliminates the need for any overhead of the index and aggregates as well as the changelog tables. In addition the split of document information into many smaller tables can now be avoided, so that we might not see any header tables and their dependent tables anymore.
We will provide more updates as they become available in the S/4 SAP S/4 Business Suite on SAP HANA (FAQ)
Thank you
erich

BAPI for Sales Order Creation.

Hello gurus,
I want to create a sales order using BAPI.
I have tried some BAPI's like BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPI_SALESDOCU_CREATEWITHDIA.
But I am not able to update the Miscellaneous Information like Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Is there any other BAPI thru which i can update these fields while creation of Sales Order.
The Fields which I can provide to BAPI as import parameter is:
Order Type(VBAK-AUART),
Contract(VBAK_VGBEL),
SALES Org (VBAK-VGORT),
Dist Channel(VBAK-VTWEG),
Division (VBAK-SPART),
Open Quantity (VBAK-KWMENG)
Plant(VBAP-WERKS)
Storage Location (VBAP-LGORT)
Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Thanks In Advance,
Points will be rewarded for Best Solution......
Yogesh Sharma

hi,
I can give u a suggestion .. try it ..
its a quite a long process....
in BAPI_SALESORDER_CREATEFROMDAT2
there is a table EXTENSIONIN...
here u can add append structure and carry on ur sales order creation
Follow the process
Customer Enhancement for VBAK, VBAP, VBEP
Description
You can use this parameter to transfer user-specific enhancments to a BAPI. The customer has to complete the EXTENSION structure and the system automatically continues processing it. If you have not defined any user-specific fields, then you can transfer a blank EXTENSIONIN structure.
Technical information about Customer Enhancements
The following description uses an example to explain how to proceed with customer enhancements to the SD tables VBAK, VBKD, VBAP and VBEP.
The customer has added their own fields to table VBAP using the INCLUDE structure CUTEST. This structure contains 2 fields:
CFIELD1, CHAR 10
CFIELD2, CHAR 3.
The customer also requires that these two fields can be maintained with the BAPI.
1. Maintain structure CUTEST in table VBAP
2. Because the BAPIs work with checkboxes, you must also define a CUTESTX checkbox for the customer structure. It should be structured like this:
Field name       Data element
CFIELD1            CHAR1
CFIELD2          CHAR1
3. Define these customer structures in the structures VBAPKOZ und VBAPKOZX using INCLUDE or APPEND.
4. Add the customer structures to the BAPE_VBAP and BAPE_VBAPX BAPI structures using the APPEND technique.
5. Adjust the following structures for customer enhancements to table VBAK:
a) VBAKKOZ
b) VBAKKOZX
c) BAPE_VBAK
d) BAPE_VBAKX
6. Adjust the following structures for customer enhancements to table VBEK:
a) VBEPKOZ
b) VBEPKOZX
c) BAPE_VBEP
d) BAPE_VBEPX
7. Generally, the data should be added to the BAPI interface in the internal communication structures (VBAKKOM, and so on). There, you can process the data in the SD tables (VBAK, and so on).
8. If the EXTENSIONIN parameter contains customer data, you must complete at least the key fields in the relevant standard parameters.
For example:
You want to change customer field VBAP-CFIELD2 for item 20 to "XYZ" in order 4711.
The following entries are expected:
Import:     BAPIVBELN-VBELN       = '0000004711' Document number
            BAPISDHD1X-UPDATEFLAG = 'U'           UPDKZ for doc header
Tables:     BAPISDITM-ITM_NUMBER = '000020'      Item number
            BAPISDITMX-ITM_NUMBER = '000020'      Item number
          + BAPISDITMX-UPDATEFLAG = 'U'           UPDKZ for item
You must complete the EXTENSION table as follows:
STRUCTURE                          VALUEPART1       1234561234567890123
BAPE_VBAP                       0000004711000020                 XYZ
BAPE_VBAPX                      0000004711000020       X
Further Information
You can find more information in the BAPI programming guide in the chapter for enhancements to BAPIs.
Notes
You must complete the STRUCTURE field with the name of the relevant enhancement structure (BAPE_VBAK, BAPE_VBAP, BAPE_VBEP). You can complete the remaining fields with the append structures from the enhancement structures.
At the moment, you can use the BAPI to store enhancements in the following structures:
VBAK : An enhancement to header data requires an append structure to BAPE_VBAK and an enhancement to structure VBAKKOZ.
VBAP : An enhancement to item data requires an append structure to BAPE_VBAP and an enhancment to structure VBAPKOZ.
VBEP : An enhancement to schedule line data requires an append structure to BAPE_VBEP and an enhancement to structure VBEPKOZ.
VBKD : If you are using an enhancement for header data, you must add an append structure to BAPE_VBAK. You also need to enhance structure VBAKKOZ. If it is for item data, you need to add an append structure to BAPE_VBAP. You must also enhance structure VBAPKOZ.
If you also want to work with checkboxes, each X-structure must also contain an append structure.
For example:
A customer has created an order and wants to include the material long text (50 digits long).
The EXTENSIONIN structure must be completed with BAPE_VBAP. Two fields have fixed definitions in this structure. These are in the VBAP host key (VBELN, POSNR). The customer sets up an append structure that contains field ZMAT50.
Because the VBELN is normally blank when you create an order, the data can look like this:
STRUCTURE   |BAPE_VBAP
VALUEPART1 |          000010Customermateriallongtext50
              VBELN     POSNR ZMAT50

Block sales order creation based on material qty

Hi,
In my scenario i want to block the sales order creation based on material qty , how i can do this?
Example:
Material qty below 100 = able to create sales order
Material qty above 100 = not able to create SO
Thanks,
Arun

Hi
For restricting the order if it is less than a specified qty, you can maintain the 'min order qty' in material master.
But your requirement is the other way round - Restrict order if it is more than specified qty.
In this case, you need to use the following sales order exit in progran MV45AFZZ
u2022 USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Hope this helps.
Regards
Madhu

Is it possible to avoid duplicate material in Sale order creation

Dear SD gurus
Is it possible to avoid material duplication in va01 sale order creation. For amendment purpose the marketing user making new line item with amended qty instead of quantity change. kindly advise me to solve the problem.
Thanks & Regards
R.Udayakumar

HI,
There's no alternative to user disciplibe . Business reqt are sometimes like this only
what you can do is use exit mv45afzz in saels order and put coding logic . this will surely work.
{Removed by Moderator}
regards
Edited by: Lakshmipathi on Aug 29, 2009 6:13 PM

Sales Order Creation or change.

Similar Messages

Maybe you are looking for