Sales Order data from CRM
Hi all,
I want to upload Sales Order data from CRM to BW with DataSource "0CRM_SALES_ORDER_I".
The upload fails due to missing information that are needed in the first update rule of the Sales ODS "0CRM_SALO". In this update rule some formulars on data field level are created that require this information.
Examples of fields that are not delivered from the CRM:
0CRMLREQSCH L. Req. Deliv. Date
0CRM_DLVSCH Last Delivery Date
0CRMPAVSCHW MAD (Requested)
0CRMPAVSCHC MAD (Confirmation)
0CRMPGISCHW Pl. GI Date (Req.)
0CRMPGISCHC Pl. GI Date (Conf.)
So what is to do? Enhance the extractor or are there alternatives.
Cheers
jb
Hello jb,
Were you able to resolve your problems with Sale Order?
thanks,
dmitriy.
Similar Messages
-
Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.
Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise. -
Stop sales order replication from CRM to R/3
Hi friends,
How can we stop the sales order Replication from CRM to R/3? Pls Guide me.
Thanking u in advance.Hi Madhu,
You can do by making distribution lock set in further statuses of the CRM sales order.
It will stop replication of CRM sales order to ECC.
Regards,
Madhu -
Using of sales orders data in CRM in Trdade promotion managemnet?
hai
can we use the sales orders data in CRM for the cubes Trade promotions management in BW-BPS for calucating the uplift volume?
can any body tel me how this uplift volume calculates.Hi Kallis ,
Refer this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fbiw%2fs-u%2ftrafficLightsforTradePromotion.pdf
or just search for Traffic lights for Trade Promotion on home page of SDN with options as all to get the PDF version.
Assign points if it helps
Cheers
Raja -
How to transfer Sales order data from R/3 to APO!!
Hi Techies,
I am in the process of moving some sales order data for a particular mat/loc combination in cfm1 after creating a integration model iam even activating even in R/3 but after doing this iam not able to view those sales orders in RRP3 t-code IN APO side.
Kindly let me know what is the procedure to transfer transactional data from R/3 to APO and to do enhancement in CIF which carries Transactional data .
Problem solving answers would be rewarded duly !!.
+PKP.Hi PKP,
The field SPEC_STOCK has the description "Key for Special Stock Section" and is linked to schedule line of the PO. This seems to be something linked to special stock, but I am not very sure about the relevance of this field.
I do not see any related field when I check the order in RRP3 or in RRP2. In standard SAP, you would only be able to use the fields that are already visible in APO. Otherwise you need to add the field to the standard SAP t-code display (read the value from SOMEWHERE and then display it in RRP3. This is possible using Badi /SAPAPO/RRP_IO_COL). Then only you can see the values which you have populated.
If this field SPEC_STOCK already has some functionality (which it should have, though I am not sure what it is), you might not be able to use it for other purposes (since system does some validations for certain fields).
You are updating the value for this field in IT_OUTPUT internal table, you also need to add an X in the corresponding field in the internal table IT_OUTPUTX.
You could try putting this X, so that your changes are considered in CIF, but I am not sure what the impact may be, and you could get a dump also possibly. Even otherwise, since this field doesn't seem to be visible against a PO in APO, I am not sure if this would be helpful for you.
As far as I could see, I did not find any standard field which could be helpful for you.
May be if you open a fresh thread and ask for advice on how to send any custom comments for PO to APO, someone could provide some inputs.
Thanks - Pawan -
Problem in sales order replication from CRM to R/3
Hi experts
As per the best practices I have done number range setting and other settings for sales order transction in both CRM and R/3 system.Though few errors the sales order doc is saved in CRM but it is not replicating to R/3 system.Can anybody help me how to solve this problem.
Thanks
VikarmHi Paul Kondaveeti
Many thanks for your solution,I am able to create sales order with out errors in CRM,But after saving the document the following errors are displaying
"Header Data-An error has occured in the system RTD_040(R/3 system) while copying the document.
"Item 10-An error has occured in the system RTD_040 while copying the document
I think the above errors issue from R/3,i find the error diagnosis report which says the following
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log. Also Please check the STANDARD COST ERROR - CONTACT xxxx MARKETING.
Transmission log
SALES_HEADER_IN processed successfully (Notification S V4 233)
Sales document 0009000051 is not changed (Notification E V4 219)
Can you please analyse and help me out how to sort out this.
Thanks & Regards
Vikram -
Sales order replication from crm to r3
Hi All,
User created the SO's in web, that SO are replicated to the CRM online, when we validate the SO it flow into R/3.
There are specific three sales order which are not flowing into r3, in crm document flow it showing as document is replicated to r3, but when we check in r3 using the va02 transaction it showing the error msg as "Document in not exist in data base or archived" this msg.
We changed the values and try to replicated to the r3 but issue will be the same, still we are gettting the same problem for only these three document. even ATP check is not happing for these three sales document.
can any tel us report "SDRQCR21" will help us to solve this error.
Please help to solve this is issue on priority.
Regards
SathihsHello Rajendra,
I checked the smw01, it showing error as Message no. V1302, "document is not in database or has been archived".
this is issue occurring only for specific business partner.
Is there any way to forcefully push the SO from crm to ecc.
standard report in ecc will help to resolve this issue "SDRQCR21" , even ATP check is not happening for this specific customer in production, we tried with same data in pre-prod system there is no issue.
Please help us to resolve this issue.
Regards
Kumar
Edited by: sat0708 on Mar 16, 2011 12:11 PM -
Sales Order Issue From CRM to R/3
Hi Gurus,
We have an issue where all Bulk ISS orders are showing up in the OTD BW reports as unreported even though they have been reported shipped. The issue appears to be, that for ISS orders only, the schedule line item number for the base bulk line, shows up as "4001" and not "1" as it typically does. The manual orders and all EDI orders do flow through with a schedule line number of "1", but not the ISS orders. Please investigate why this is occuring for ISS orders. .
Further to this issue ...
Order XXXXXX is a CRM order for sales BOM material and this order in R/3 has the schedule line item number for item XX as XXXX. It appears that all Sales BOM orders from CRM are getting the schedule line item number of 4001. Please debug and investigate as to where this is coming from.
It is basically abt Schedule line number instead of
1 it is 4001 ...
Please guide me
How I do I go abt this .. is there a bapi call that I need to refer to
Please help points guaranteed...Middleware are a set of transactions. For replication some tx are:
R3AC1 Objetos de Datos (Business and Condition Objetcs)
R3AC3 Objetos de Customizing
R3AC4 Activation of Delta Download
R3AC5 Adapter Object Overview (Customizing Download) - Initial Upload of Condition MD
R3AM1
R3AS Initial Load
SMQ1 qRFC Monitor (Outbound Queue)
SMQ2 qRFC Monitor (Inbound Queue)
You need to create a Site (r3) and suscription for replication in tx SMOEAC . The suscriptions area standard: product, business partner, sales document, etc.
Also you need defined filter for customizing replication and data replication in tx R3AS and R3AC1.
You can use best practice for replication. You can access on: http://help.sap.com/bp_crmv250/CRM_DE/index.htm. Access to "C03: CRM Master and Transaction Data Replication".
Some points...
Regards -
Sales Order transfer from CRM to R3
Hi experts,
I'm working on SAP CRM system (release 6.0). I'm trying to transfer a business transaction, a sales order, from CRM to R3 but, when I go to the transaction "SMW01" in order to check the BDOCS, I face this errors:
- "No authorization for maintaining sales documents in [client organizational unit][distribuition channel][division]";
- "R/3 adapter is called";
Nevertheless the opposite flow is performed: all the sales documents created on R3 are tranfered to CRM.
All the queues are registered.
The CRM business transaction has the same configuratiosn of the corresponding sales document in R3.
Do you have any suggestions?
Thanks and regards,
StefanoHi Stefano,
did you check the user authorization in R/3? The scenario you've described is possible it the user the R/3 uses to connect to CRM has full authorization, however the user the CRM system uses to connect to R/3 not.
Regards
Wolfgang -
Transport Sales Area Data from CRM to R/3
I have created a function module within DSAVE event in BDT so the Sales Area BILLING BLOCK REASON could be updated with a fixed value according to the Sales Area selected by the user.
That worked all right using the standard function module CRM_BUPA_FRG0100_SAVE (within the event), but the real problem is the once you save the new Business or modify it, it does not replicate in R/3 (using Middleware).
I discovered that the function I've created runs after the COMMIT that save the data in the Data Base Tables and also send the information to R/3.
I also tried DSAVC event but I had the same result.
Does anyone has the clue to make the information be sent with the rest of Partner data?
Thank you in advance.
MarielaHi,
You can upload products to R/3 from CRM system but you cannot upload organizational model from CRM to R/3.
To upload products from CRM to R/3 do following settings:
Execute transaction: SMOEAC
Select site view and expand site R/3.
Create a R/3 site by specifying the RFC destination of the same while creating new site.
Create a subscription from publication: Material(MESG)
Assign the newly created subscription to R/3 site.
save settings.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Conversion of Sales Order data from legacy data into Order Management `
Dear All,
I have tried the order import coversion but the items which are BOM related are importing Successfully, not the user created items which are not BOM related are not importing...
So, i request a solution for the above problem as soon as possible...
Please help me out......
Regards,
Vijay.Hello jb,
Were you able to resolve your problems with Sale Order?
thanks,
dmitriy. -
hi,
how can we send sale order data from sapxisap.
are there any standard tcode like BD10 BD12 BD14.
plz help me.
thanks and regards
vijenderFor creating sales documents (sales order) through IDOCS you will have to use the T code WE19. In that click basic type and enter order05(IDOC type) and select via message type then enter ORDERS(message type), click execute.
You will get to see many fields.here you have to enter the datas that you enter in the VA01 screen in order to create sales order. The datas such as material name, date, qty, P.O no etc. After entering all the datas, you click standard inbound the IDOC would be created by the system.You can see the created order by going in to VA03 screen.
Next time when you create the IDOC, in same tcode WE19 screen, click existing IDOC and enter the IDOC which you created in the above step and just change the P.O no.Sytem will create new sales order through new IDOC
Before doing all you need to maintain the partner profile in T code WE20 -
Need info on Standard Web services to pull Order data in CRM from external applications
Hi Gurus,
I have a requirement to pull Order data in CRM from external non-sap application using Web services. Are there any standard SAP provided web services to pull order data based on some input? If yes, can you provide me any kind of documentation related to this?
Appreciate your help on this.
Thanks
LakshmanHi Lakshman,
I have checked further.
Please review below link of the SAP Help documentation :
http://help.sap.com/saphelp_nw70/helpdata/en/47/3a989cbcef2f35e10000000a1553f6/content.htm?frameset=/en/46/97218e79f115eae10000000a114a6b/frameset.htm¤t_toc=/en/d1/802cfc454211d189710000e8322d00/plain.htm&node_id=439&show_children=false
and also the link :
–http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=347DD31EB5AB4BC592BD8B29C0981A1B
Hoping that this will be helpful.
Best regards - Christophe -
BAPI for Create PO from Sales Order Data and POST GR from PO created
Dear,
Can u help me how to create BAPI for Purchase Order creation from sales order Data
what the bapi to Post GR from the PO created.
Regards,
ManojHello Manoj what you have to do to create PO from PR is that
1) Use BAPISDORDER_GETDETAILEDLIST (pass sales order number in sales_document table) and then get PR (Purchase requisition number from this BAPI.
2) Use BAPI_REQUISITION_GETDETAIL to get PR items
3) Use BAPI_PO_CREATE1 to craete PO from PR then.
to create goods movement you can use
BAPI_GOODSMVT_CREATE
REWARDS IF USEFUL. -
EDI Sales order creation in CRM through inbound IDocs from non SAP system
Hi Friends,
We are having a scenario where we need to create a Sales Order in CRM for a B2B EDI transmission through IDoc. Customer is sending the EDI Transmission of his Sales order , which is passing through PI and then reaching to CRM to create a Sales order.This is the design we need to follow to make it happen,we are initially trying to create an order using WE19 for testing and the details are:
Basic Type - CRMXIF_ORDER_SAVE_M01
Message Type - CRMXIF_ORDER_SAVE_M
Functional Module - APPL_IDOC_INPUTI which is automatically giving a status text as " Function module CRMXIF_ORDER_SAVE has been called successfully", but no sales order is saved in CRM.
We are getting idocs posted successfully with status 53 with the statuses sequence 74, 50 ,64, 62 and 53.Our issue is inspire of the Idoc having status 53 and the FM called successfully we are not seeing the sales order created in CRM.
We are stuck here no sales order is created in CRM.
Are we missing any config. - set up - Prerequisit - Any OSS note need to be applied -- ANy middle ware setting ?
Any help will be greatly appreciated.
Thanks
VijayHi Christophe,
Awesome!!!!!! it worked, You are the best.
I could able to create a sales order in CRM,but below are the valid data I passed in the respective segment fields.Except for first 3 values rest all did not get reflected in teh Sales order.I feel i am missing some qualifiers.
Can you kindly share the IDoc data to be passed in...along with respective segments and fields:
Segment Field
E101CRMXIF_BUSTRANS OBJECT_TASK
E101CRMXIF_BUSTRANS PROCESS_TYPE
E101CRMXIF_BUSTRANS POSTING_DATE
E101CRMXIF_PARTNER PARTNER_NO
E101CRMXIF_PARTNER RELATION_PARTNER_NO
E101CRMXIF_ORGMAN SALES_ORG
E101CRMXIF_ORGMAN DIS_CHANNEL
E101CRMXIF_ORGMAN DIVISION
E101CRMXIF_SALES PO_NUMBER_SOLD
E101CRMXIF_SALES YOUR_REF_SOLD
E101CRMXIF_SALES PO_NUMBER_SHIP
E101CRMXIF_BUSTRANS_ITEM ITEM_NUMBER
E101CRMXIF_BUSTRANS_ITEM ITEM_TYPE
E101CRMXIF_BUSTRANS_ITEM ORDERED_PRODUCT
E101CRMXIF_PRODUCT_I PROCESS_QTY_UNIT
E101CRMXIF_PRODUCT_I PROCESS_QTY_UNIT_ISO
E101CRMXIF_PRODUCT_I BASE_QTY_UNIT
E101CRMXIF_PRODUCT_I BASE_QTY_UNIT_ISO
E101CRMXIF_SCHEDLIN_I ORDER_QTY
Thanks a ton in advance .
Vijay
Maybe you are looking for
-
Time Machine backup does not work after 10.7.2 update
Hi, after updating to 10.7.2 time machine does not perform any backups on my time capsule (error-1). What can I do? Please help. Thanks.
-
Tree Component Background Color
Hi, I am using the Tree Component, it has 3 nodes. - Is there a way I could change the background color when I open each node. - Is there a way to change the font of the text associated to each node. Any Help would be appreciated. NAC
-
Wifi: no hardware installed, after latest yosemite security update
I just applied Security Update 2015-002 (at the behest of Software Update), along with the Command Line Tools (OS X 10.10) v6.2 update, and after the mini rebooted, it now says Wifi:No Hardware installed. And when I go to Network and Hardware in Syst
-
Multiple Dataload, DTP, Dublicate Keys
Hi specialists, following scenario: Some master-data (let's say for 0material) is loaded multiple times (let's say 3 times) to the BW via a Full-InfoPackage. Then a Delta-DTP is started to forward the (latest) records from the PSA to the master-data-
-
Client Commands are Currently Not Being Accepted
Hi, I made a outline restructure on my essbase but my laptop suddenly shut down. When I tried to turn the application on again and tried to add members on Essbase, I got the error message, "Client commands are currently not being accepted" I can't ma