Sales order display-how to change color of item with high level 0

Please does anyone know how can i chenge the color of item with high level 0 in display of sales order in red or yellow so it can be seen better for better searching on page?
thank you in advance...
regards..

You'd probably have to do a modification in SD for that. But what you can do, is make the higher level item not changeable. You could also set the display range to UHAU to only see the main items, do this in transaction VOV8. Or you could change your item category in VOV7 only to show main items.
good luck

Similar Messages

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How to block a sales order when there is a free good item .

Hello Gurus ,
How to block a sales order when there is a free good item , only the authorised person should have authorisation to release those blocked Sales orders.
Reason - They want to have a track of free goods given to customer & to avoid the misusing things
Looking for your inputs
Thanks in advance
Regards
Venkat

Hi
I think you can try with Status Profile in BS02 define and assign for item category TANN.
In status profile you can block the delivery and also billing unless some changes the object status as released.
Just try and explore
regards
Prashanth

How to change colors of LCD/VFD controls from SGC-Tek?

Hi Anybody got idea how to change colors of LCD/VFD controls from SGC-Tek?
I have tried but could not. When I try to make myself a nest cluster of clusters of LEDs, I can change colours but I can't do the same thing with LCD/VFD controls.
Please check at LCD/VFD controls
Clement

I suspect this repsonse is somewhat mis-leading, the code has no effect on the control other than setting its state, although the route is somewhat tedious for the mod.
I would imagine that the control is set up so that the pixels didn't move around when they are being used as controls.
There are nested groups and locks on the controls, which might make the ordering in the cluster easier to manage.
The following should work....... ;-) it did for me
Open your own new VI
Open the main LCD VI
Open the Browse VI Hierachy
Drag and drop the LCD VI onto your own diagram
Create a cluster from the LCD VI's connector
Now ungroup the clusters and unlock them (this is tedious) if you create your own then you could be more imaginative in the structure, I leave that for homework.
Then import a new bitmap (gif) into the control
Now update the modified contol back into the master control
........ Told you it could be done, but I am not sure the pain was worth it.
BUT
Try the alternative control..... with colour settings as well, ANY colour and even some size control.
It was here http://members.lycos.co.uk/sgctek/

In third party sales order process how business come to know that the vend

Hi SD Gurus,
In third party sales order process how business come to know that the vendor has delivery the goods to the customer?
Where Business will check whether Vendor has delivered the goods or not to the customer?
Thanks & Regards,
Nivas

Hi,
Process
VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
Kapil

In Third Party sales order processing how we come to know that the customer

Hi SAP SD Gurus,
In Third Party sales order processing how we come to know that the customer is recived the Goods from the vendor?
Thanks & Regards,
Sreenivas.P

From a high level view, the behavior should work like this:
- Sales order placed from customer PO via Tcode VA01. Purchase Requisition created upon saving the order
- Purchase order created with reference to Purchase Requisition via Tcode ME21N
- Receive confirmation from vendor that goods have shipped via EDI
- Create invoice receipt to vendor via Tcode MIRO
- Create billing document to bill customer via VF01

Sales Order Material Determination Cannot Change Quantity of the Sub-item

Hi SAP Guru's,
Has anyone encountered this scenario?
1. Created a standard order with an item as material substitution
2. Created a pro-forma invoice referencing the sales order created
3. Went into VA02 to change the item quantity of the higher level item in the material substitution
Expectation is that once you change the quantity of the higher level item, the quantity of the sub-item should also reflect whatever is in the quantity of the higher level item.
Actual Result is that only the higher level item quantity is changed, the sub item quantity remained the same.
Is there any configuration or copy control that we can check regarding this?

Hi Maurice,
Apologies! The qty of the sub item should change when you change it in VA02 even after proforma is created.
Could you pls check the item categories TAX and TAPS config i.e. the material entered should get item category TAX and the sub item should have TAPS or the item categories should have same configuration as TAX and TAPS.
Please check.
Regards,
Raghu.

How to change colors of individual column bar in the same data series

in mac numbers, how to change colors of individual column bar in the same data series. The entire column series gets selected in the column bars and cannot select to change colors of specifc bars.

Hi Kiran,
no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
Regards,
Govindu

How to change colors in Auction monitor

Hi Experts,
Could you please help me on below requirement,
In Auction Monitor , need different darker colors for tracking bids because some colors cannot be seen on the screen.
Could you please guide me how to change colors in Monitor.
Thanks,
Pavan.

Hi Vinay.
I would like to suggest a couple of references, quite similar to your requirement,
[SDN - Reference for Different Colors in Single Graphical bar|About Different Colors in Single Graphical bar;
[SDN - Reference for changing colors for graphs|Anyone used colors in VC?;
[SAP HELP - Standard Reference for Assigning Colors to Parts of a Graph|http://help.sap.com/saphelp_nw04/helpdata/en/39/cca358576911d1896f0000e829fbbd/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

How to change color in BEx Browser?

Hello Friends,
How to change color in BEx Browser?
My browser shows all the report description with pink color. I want to change the color.
Please let me know.
Thanks in advance.

Hello Bhavin,
It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
Best regards,
Pat M.

How to change color in the title line?

Hi experts, How to change color in the title line, i show an image for explained better
!http://img688.imageshack.us/img688/9259/imagenjar.png!
thanks

in Views.css file
file below object.and change border-color as you desired to reflect.
.TitleTable {
     font-family: arial, helvetica, sans-serif;
     border-width: 0 0 4px 0;
     border-style: solid;
     border-color: #6666cc; ----> change here.
hope this helps !
-Niranjan K

How to change color of text is value is equal to 0

how to change color of text or background if value is equal to 0

HI,
In Template Builder,Insert the conditional region,there you select the column and give condition is equal to 0 and in advanced enter the following code
<?if:XMLfield=0?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?>
try this it works.
Regards
Uday

Sales order as complete and change the delivery status.

Hello All,
We produces an order but then the customer calls and does not want the material so we in turn will scrap the material against the production order using transaction MB1A mvmt type 951 E.
Since the material were scrapped and no material were shipped against the sales order, the sales order u201Coverall statusu201D remains open and the delivery status is u201Cnot deliveredu201D.
To close the order we u201CRejected line itemu201D and moved on.
I would like to know if there is another way we can set the sales order as complete and change the delivery status.
Regards
Amit

Hello,
you can use the status profile for the same. but a better way would still be to use the rejection reasons . the rejectionr reasons are very well integrated with the document flow as well as transfer of requreiemnts to Production
so a best practise would be to use rejection reason
hope this helps
Thanks
akasha

How to change a text item to have a link that opens a different page?

Hi,
How to change a text item to have a link that opens a different page?
Thanks,
Guy

Hi Denes,
I understood what the code will do. But it did not work.
...a href="f?p=&APP_ID.:2:&SESSION.">LINK</a...
By default, P5_TASK_NAME displays Task Name which is passed from Page 3.
So I changed your code as follows so that P5_TASK_NAME value may be displayed with a link.
...a href="f?p=&APP_ID.:3:&SESSION.">:P5_TASK_NAME</a...
But P5_TASK_NAME value appears without any link and does not open page 3.
Then I created a new text item (display only) in the same HTML region in page 5 and entered the following code in the default box:
...a href="f?p=&APP_ID.:3:&SESSION.">LINK</a...
When I ran the application, it displayed the whole code as text.
How can I display P5_TASK_NAME value with a link to open page 3?
Would appreciate your help.
... to be replaced with < or >
Could you please let me know how to display link code correctly?
Thanks,
Guy
Edited by: GUY3 on Mar 11, 2009 4:20 PM

Sales order display-how to change color of item with high level 0

Similar Messages

Maybe you are looking for