Sales order does not consumpt Independent requirement

Hi Gurus,
My material is as below:
MRP Type: M0
Stategy group:40      Planning with final assembly
Consumption mode :2 Backward and forward consumption
My independent Req is 'VSF  Planning with final assembly'
My sales order item category is 'Zwac', rety is using ZWAC-M0-KSV 'Sales order with consumption'
but before i create sales order:
MRP element  Received/Requirement quantity   
stock             
IndReq              100-
After that:
MRP element  Received/Requirement quantity   
stock             
IndReq              100-
Sales order        90-
but i expected like this:
MRP element  Received/Requirement quantity   
stock             
IndReq              10-
Sales order        90-
Do you know what i did wrong , thank you!
Regards,
dragsky

Dear,
If you have planning stategy 40 , then PIR qty will be consumed duirng MRP run if both PIR created with VSF and you have incomming Sales Order qty .Let say you have 100 pc PIR and also 150 pc of sales order , run MRP-MD03 ,  it will create 150 pc Planned order or PR .
If your using and Sales Order is not getting consumed upon while running MRP , then couple of checks in this case :
1.Is your PIR (created in MD61) "VSF"?
The requirement type should be KSV to consume with VSF. Please check OVZI to check why your item category in Sales Order get the requirement type 041.
Here you must have following set up :
Requirement Class : 041 , Availablity , Requirement Check box Marked and Allocation Indicator-1 .This Alocation indicator basically Controls the consumption of customer requirements with planned independent requirements whereby the customer requirements type is only allocated one consumption strategy.If it blank that means no consumption with customer requirement .
Please check If you want req. type 041 to consume with VSF, then you have the change the configuration of planning strategy. Use path Production -> Production Planning -> Demand Management -> Planned Independent Requirements -> Planning Strategy -> Define Strategy.
2. What is the schedule line category in your SO ??  Is it "CP"? You are using customised item categoery zWAC which may be inharited from WAC-Order /Delivery Requirement (OVZI)
Check and come back.Hope this will address the issue
regards
JH

Similar Messages

  • Sales order does not allow make-to-order production

    Dear Friends,
    I am trying to do do planned order for sales order in MD50 it was showing the error message as
    "Sales order does not allow make-to-order production"
    Can any one solve this
    Shakthi

    Hi Shakthi,
    It is also possible to set the priority for Requirement Type determination like
    0 Material master strategy, then item category and MRP type
    1 Item Category and MRP Type
    2 as 1, with check for allowed requirement type.
    The transaction for this is same as "Requirement Type Determination :
    Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
    Look for "Source".
    In this transaction, Please, check "Requirements".
    Please, make sure of the following 2 things :
    1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
    So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
    The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
    2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
    I hope this should solve your problem.
    Regards,
    Sandeep

  • Sales order does not extract plant information from material master data

    Hi experts,
    I have created a sales order. However, the plant in the shipping tab can only be manually entered.
    I have made the check:
    the customer material master data does not have the plant info.
    the customer master data does not have it either.
    It is defined in the material master data: sales:general/plant
    But the sales order did not extract this information. Why does this happen?
    Thank you in advance.
    Best regards,
    Fan

    Hello Friend,
    As right stated by you,
    The Plant will be copied from the master data to the sales order, if not it should be manually entered
    The Sequence System will search for the Plant is as follow..
    1. Customer material infor record, If it was not maintained then it will search in
    2. Customer master, if the entre was not maintained in the SHIPPING TAB
    3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
    So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
    This might be the issue.
    Please revert if you want further details
    regards,
    santosh

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Sales Order does not show up at the resource level.

    Hi guys,
    I have a flour mill of having 4 processs (resources)
    1). Tempering (cleaning).
    2). Milling.
    3). Blending.
    4). Packing.
    I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
    Thanks
    Shaan.
    Edited by: Shaan313 on Sep 27, 2011 8:22 PM

    313,
    https://service.sap.com/sap/support/notes/1406120
    Since you asked the question, I can assume that you don't have an "S" number.  speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
    Or, you can try on your own.  A few stars have to be in alignment for the second method to work.
    https://service.sap.com/request-user
    Best Regards,
    DB49

  • New settlement parameters  in   sales order  does not  work

    Hi
    I have a    sales order for  service material.    It is invoiced.    I  have to settle it.    The  existing  settlement rule  is  wrong. So  I have created a new allocation structure and   changed   settlement  parameter  in     the  sales order.   I save the  sales order.
    But in VA88 the settlement does not work. I get error message ' receiver cost element not defined and thet cat. PSG not defined.'
    But the same allocation structure work good for new sales order.
    Pl advise how  I  can  do the settlement for  old   sales orders,  subsequently changed for  settlement parameter ie allocation structure. 
    Thanks
    kamala

    Hello Kamala
    Not an expert on this subject, but here is what I suggest, Try and see if it works.
    1) Firstly retract the changes you did in sales order and settle first with the wrong settlement parameter (Old data).
    2) Now change the existing allocation structure, don't create NEW ONE. If you change an allocation structure, the changes only affect future settlements.
    3) Then reverse the settlement.
    4) Now re-do the settlement.
    Let me know how it goes. Take care.

  • Sales Orders Assigned to Planned Independent Requirements

    Hello everyone
    I am trying to write an SQVI query which will show me which sales orders are confirmed against which planned independent requirement; so it will show the same data as MD73.
    Is there a table which links the sales order to the PIR?
    Thanks
    Jen

    Dear ,
    Find below the table required by you : Go to Se 16
    PIR Table : PBIM   ,Here you will find Sales Order Filed : KDAUF
    Please Check PBED and PBIC which is also useful .
    Regards
    JH

  • UI API issue, clicking base document on sales order does not set ActiveForm

    I have a sales order window open with a sales order loaded.  When I right click and click on base document, the sales quotation window shows up properly, however in code when I get the ActiveForm, it is the sales order form and not the sales quotation form!
    Private Sub SBO_Application_FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean) Handles SBO_Application.FormDataEvent
        If BusinessObjectInfo.Type = bo_type.SALES_QUOTATION And BusinessObjectInfo.BeforeAction = False And    BusinessObjectInfo.EventType = BoEventTypes.et_FORM_DATA_LOAD
            SBO_Application.MessageBox(SBO_Application.Forms.ActiveForm.Type) 'shows 139 instead of 149?
        End If
    End Sub
    If quotation data is loaded using the next/prev/first/last buttons on the menu bar, the activeform .Type is 149.
    If quotation data is laoded using the Base Document shortcut on the sales order, the activeform.Type is 139.
    Is that suppose to be correct?  If so, how do I get the new sales quotation form that is created by using the base document shortcut?
    Edited by: Dung Nguyen on Aug 24, 2011 2:12 AM

    János Nagy wrote:
    Hi Dung,
    >
    > Formdataevent is handling trhe data events, not GUI events. In form data load means that the form is data is loaded, not that the form is activated.
    >
    > You must handle menuevent, and in menuevent before_action = false case the active form will be the sales quotation (or child/parent in the document flow).
    >
    > You may use an SDN tool to determine the events. You can download it from:
    > http://www.sdn.sap.com/irj/scn/businessone-tools
    >
    >
    > Regards
    >
    > János
    The problem with form activated is that it is triggered everytime the window is "activated'.  Meaning that if a user clicks out of the form and clicks back in, the form activated event is triggered.
    I need to perform an operation only on the first time the form and data is loaded and/or activated.

  • In sales order does not not show sales bom component

    hi to all,
                it is possible if i create one sales order and i connect one sales bom to order and do not display component of sales bom in sales order so pls tell me procedure.pls tell me how to set print layout of sales order without sales bom component
    Regards
    vishal

    Hi,
    To do not show the component items in Sales Order, you should use Assembly type of BoM.
    Here I copied the differences between them which is from Online Help.
    The sales bill of materials and the assembly bill of materials represent a finished product which is assembled at the sales stage.
    The difference between the assembly bill of materials and the sales bill of materials is as follows:
    ·        Assembly bill of materials; the finished product appears in the sales order document.
    ·        Sales bill of materials; both the finished product and the components appear as separate items in the sales order document.
    Hope this helps you.
    regards,
    maggie an

  • Converting contract to sales order does not auto create schedule lines

    Hi
    When I convert quotation to sales order, then schedule lines get auto created.
    But when I convert contract to sales order, then schedule lines don't be auto created. Instead, a confirmation screen for proposal delivery date pops up for every line item in the sales order.
    Is there any suggestion how can I solve my problem ?
    Thanks..

    Hi,
    In standard SD module, system checks availability for each line item, gives you popup screen of confirmation.
    If you don't want availability or popuscreen of confirmation,then
    Go to VOV6 >>> Select schedule line which you are using in sales order for line item >>> Remove tick mark of availability check.
    Else
    Remove availability check rule from material master >>> Under tab Sales : ganral/plant
    kapil

  • Sales Order is not consider for MRP in MRP Type PD and Strategy 40

    Sales Order quantity is not consider for net requirement calculating in MRP.
    My MRP Type is PD and Strategy 40.
    Also in MD04 Sales order is not appearing.

    Dear,
    Requirements to MD04 will flow based on the settings you maintain in OVZ9 for the combination of "Availability Check" and "Checking Rule". Here whatever fields you choose under the tab "In/outward movements", that will be considered.
    It may be because of Requirement type Missing at schedule line category level . In MD04 requirement are pass on Either Individually or collectively . In Case of Individual each schedule line create one entry in MD04 ( Stock Requirement list)
    So check the materail master for checking group is maintain or not?
    Please refer this thread also,
    Re: Sale order not reflecting in MD04
    After that run MRP again and check the result.
    Regards,
    R.Brahmankar

  • Required delivery date in sales order shoud not be less than the inhouse pd

    Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time. 
    Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
    Required delivery date in sales order shoud not be less than the inhouse production lead time.
    Please help.
    Regards

    IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
    Here select the combination of your Availability Check & Checking Rule.
    Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
    This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
    Hope this helps.
    Thanks,
    Jignesh Mehta
    Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
    Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

  • Sales order stock not able to use for delivery

    Hi,
    I am facing a issue for special stock of material.
    During cut over activity some documents are created in system. One of them was a sales order and then stock was also uploaded for the sales order.
    In our business special stock was required and hence stock was uploaded using 561E.
    Now in between we had archived these material documents (561E). As an effect in MMBE we are able to see special stock for material but if we click on it no sales order number is displayed. The sales order is still active. At warehouse report that is MB52 sales order number is displayed.
    Now when we are trying to do delivery for this sales order system is giving error message that "sales order stock does not exists" M7 184.
    I am not able to do any type of movement with this stock.
    I tried to correct this stock inconsistency using transaction MB5K and there were no records.
    Please guide me how to get rid of this issue.
    Thanks and Regards,
    Adwait Bachuwar

    You can even archive material documents the day after its creation, there is no defined dependency.
    And your error is certainly not caused by an archived material document.
    I just wonder a bit why a sales order stock is lying for 2 years in your system, this is usually short term stock, goods issued very soon after its production, as it is specially produced for one sales order.
    I am not in a SAP system today as we have a public holiday to double check the values from your screen shots with my system.
    Right now I somehow feel that there is something wrong with the special stock number seen in your MB52 screenshot, there is a space between the / the the first zero
    Also I do not see any batch number and special stock number in MMBE screen
    Can you add a screenshot from your sales order, does it really have this number which is seen in the special stock field?

  • Set  item categaries of sales order  is  not  relevant for picking

    dear friends:
       when i created the outbound delivery and must maintain the picking quantity of materails.i change the configration of system so that not nessesary maintain the picking quantity. set  item categaries of sales order  is  not  relevant for picking via t_code:vlop,what it effect .help me analyze it .
    best regards.

    Hello,
    In TA :OVLP   set/reset the indicator according to your requirement.
    In the case of outbound deliveries, only the delivery items that are relevant for picking are transferred to the Warehouse Management (WM) component. Certain items such as text items or service items (consulting activities) are not relevant for picking.(in those cases uncheck the box)
    In the case of inbound deliveries, this indicator controls whether the item is relevant for putaway.
    This indicator must be set in order for the item to be included in a Warehouse Management transfer order and then put away.
    Regards,
    Nisha
    @award pts if helpful.

  • HT3775 hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

    hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

    In order to help, more information is needed.
    What type of document is it (word document, picture or?) And do you know what software it was created with and what file format it is?

Maybe you are looking for