Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

Similar Messages

  • Sales order does not allow make-to-order production

    Dear Friends,
    I am trying to do do planned order for sales order in MD50 it was showing the error message as
    "Sales order does not allow make-to-order production"
    Can any one solve this
    Shakthi

    Hi Shakthi,
    It is also possible to set the priority for Requirement Type determination like
    0 Material master strategy, then item category and MRP type
    1 Item Category and MRP Type
    2 as 1, with check for allowed requirement type.
    The transaction for this is same as "Requirement Type Determination :
    Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
    Look for "Source".
    In this transaction, Please, check "Requirements".
    Please, make sure of the following 2 things :
    1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
    So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
    The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
    2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
    I hope this should solve your problem.
    Regards,
    Sandeep

  • How to delete the sales org information from BP Master Data in SAP CRM 5.0

    Hi Guruu2019s
    How to delete the sales org information from BP Master Data in SAP CRM 5.0
    Thanks...
    Mahesh Pasupunuri

    Hello
    There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
    Regards
    Joaquin

  • Converting contract to sales order does not auto create schedule lines

    Hi
    When I convert quotation to sales order, then schedule lines get auto created.
    But when I convert contract to sales order, then schedule lines don't be auto created. Instead, a confirmation screen for proposal delivery date pops up for every line item in the sales order.
    Is there any suggestion how can I solve my problem ?
    Thanks..

    Hi,
    In standard SD module, system checks availability for each line item, gives you popup screen of confirmation.
    If you don't want availability or popuscreen of confirmation,then
    Go to VOV6 >>> Select schedule line which you are using in sales order for line item >>> Remove tick mark of availability check.
    Else
    Remove availability check rule from material master >>> Under tab Sales : ganral/plant
    kapil

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Sales order does not consumpt Independent requirement

    Hi Gurus,
    My material is as below:
    MRP Type: M0
    Stategy group:40      Planning with final assembly
    Consumption mode :2 Backward and forward consumption
    My independent Req is 'VSF  Planning with final assembly'
    My sales order item category is 'Zwac', rety is using ZWAC-M0-KSV 'Sales order with consumption'
    but before i create sales order:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              100-
    After that:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              100-
    Sales order        90-
    but i expected like this:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              10-
    Sales order        90-
    Do you know what i did wrong , thank you!
    Regards,
    dragsky

    Dear,
    If you have planning stategy 40 , then PIR qty will be consumed duirng MRP run if both PIR created with VSF and you have incomming Sales Order qty .Let say you have 100 pc PIR and also 150 pc of sales order , run MRP-MD03 ,  it will create 150 pc Planned order or PR .
    If your using and Sales Order is not getting consumed upon while running MRP , then couple of checks in this case :
    1.Is your PIR (created in MD61) "VSF"?
    The requirement type should be KSV to consume with VSF. Please check OVZI to check why your item category in Sales Order get the requirement type 041.
    Here you must have following set up :
    Requirement Class : 041 , Availablity , Requirement Check box Marked and Allocation Indicator-1 .This Alocation indicator basically Controls the consumption of customer requirements with planned independent requirements whereby the customer requirements type is only allocated one consumption strategy.If it blank that means no consumption with customer requirement .
    Please check If you want req. type 041 to consume with VSF, then you have the change the configuration of planning strategy. Use path Production -> Production Planning -> Demand Management -> Planned Independent Requirements -> Planning Strategy -> Define Strategy.
    2. What is the schedule line category in your SO ??  Is it "CP"? You are using customised item categoery zWAC which may be inharited from WAC-Order /Delivery Requirement (OVZI)
    Check and come back.Hope this will address the issue
    regards
    JH

  • Sales Order does not show up at the resource level.

    Hi guys,
    I have a flour mill of having 4 processs (resources)
    1). Tempering (cleaning).
    2). Milling.
    3). Blending.
    4). Packing.
    I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
    Thanks
    Shaan.
    Edited by: Shaan313 on Sep 27, 2011 8:22 PM

    313,
    https://service.sap.com/sap/support/notes/1406120
    Since you asked the question, I can assume that you don't have an "S" number.  speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
    Or, you can try on your own.  A few stars have to be in alignment for the second method to work.
    https://service.sap.com/request-user
    Best Regards,
    DB49

  • Need notes on MDM and on material master data

    HI Gurus
    Can some one help me In understnding MDM tool and if can provide notes and second need notes on material master data
    thanks everybody

    Hi,
    Please refer below links for the MDM and material master. Thanking you.
    http://wiki.sdn.sap.com/wiki/display/SAPMDM/SAPNetWeaverMDM+Tools
    http://www.sap-img.com/materials/classification-view-of-material-master.htm
    http://www.magnatraining.com/how-to-create-material-master-in-sap-mm/

  • New settlement parameters  in   sales order  does not  work

    Hi
    I have a    sales order for  service material.    It is invoiced.    I  have to settle it.    The  existing  settlement rule  is  wrong. So  I have created a new allocation structure and   changed   settlement  parameter  in     the  sales order.   I save the  sales order.
    But in VA88 the settlement does not work. I get error message ' receiver cost element not defined and thet cat. PSG not defined.'
    But the same allocation structure work good for new sales order.
    Pl advise how  I  can  do the settlement for  old   sales orders,  subsequently changed for  settlement parameter ie allocation structure. 
    Thanks
    kamala

    Hello Kamala
    Not an expert on this subject, but here is what I suggest, Try and see if it works.
    1) Firstly retract the changes you did in sales order and settle first with the wrong settlement parameter (Old data).
    2) Now change the existing allocation structure, don't create NEW ONE. If you change an allocation structure, the changes only affect future settlements.
    3) Then reverse the settlement.
    4) Now re-do the settlement.
    Let me know how it goes. Take care.

  • UI API issue, clicking base document on sales order does not set ActiveForm

    I have a sales order window open with a sales order loaded.  When I right click and click on base document, the sales quotation window shows up properly, however in code when I get the ActiveForm, it is the sales order form and not the sales quotation form!
    Private Sub SBO_Application_FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean) Handles SBO_Application.FormDataEvent
        If BusinessObjectInfo.Type = bo_type.SALES_QUOTATION And BusinessObjectInfo.BeforeAction = False And    BusinessObjectInfo.EventType = BoEventTypes.et_FORM_DATA_LOAD
            SBO_Application.MessageBox(SBO_Application.Forms.ActiveForm.Type) 'shows 139 instead of 149?
        End If
    End Sub
    If quotation data is loaded using the next/prev/first/last buttons on the menu bar, the activeform .Type is 149.
    If quotation data is laoded using the Base Document shortcut on the sales order, the activeform.Type is 139.
    Is that suppose to be correct?  If so, how do I get the new sales quotation form that is created by using the base document shortcut?
    Edited by: Dung Nguyen on Aug 24, 2011 2:12 AM

    János Nagy wrote:
    Hi Dung,
    >
    > Formdataevent is handling trhe data events, not GUI events. In form data load means that the form is data is loaded, not that the form is activated.
    >
    > You must handle menuevent, and in menuevent before_action = false case the active form will be the sales quotation (or child/parent in the document flow).
    >
    > You may use an SDN tool to determine the events. You can download it from:
    > http://www.sdn.sap.com/irj/scn/businessone-tools
    >
    >
    > Regards
    >
    > János
    The problem with form activated is that it is triggered everytime the window is "activated'.  Meaning that if a user clicks out of the form and clicks back in, the form activated event is triggered.
    I need to perform an operation only on the first time the form and data is loaded and/or activated.

  • In sales order does not not show sales bom component

    hi to all,
                it is possible if i create one sales order and i connect one sales bom to order and do not display component of sales bom in sales order so pls tell me procedure.pls tell me how to set print layout of sales order without sales bom component
    Regards
    vishal

    Hi,
    To do not show the component items in Sales Order, you should use Assembly type of BoM.
    Here I copied the differences between them which is from Online Help.
    The sales bill of materials and the assembly bill of materials represent a finished product which is assembled at the sales stage.
    The difference between the assembly bill of materials and the sales bill of materials is as follows:
    ·        Assembly bill of materials; the finished product appears in the sales order document.
    ·        Sales bill of materials; both the finished product and the components appear as separate items in the sales order document.
    Hope this helps you.
    regards,
    maggie an

  • "Export to Excel" does not work for query based on Master Data InfoSet

    We have many queries based on InfoSet consisting 2 or more PS Master Data. After we upgraded from BW 3.1 to 3.5, the "Export To Excel" function no longer works via BEx Browser. It returns all blanks where master data should be shown. Only the non-data area like column headings are exported to excel.
    Is this a bug introduced in BW 3.5?
    Thanks,
    Kinuko

    It seems that BW 3.5 SP10 may fix this problem.

  • PRICE IS  NOT  REFLECTING  IN  PR  FROM  MATERIAL MASTER

    Dear Experts
    The  moving average price of material  is for eg  80 , in PR  it is  showing 0.01.Then  with such price  we can  not process  PO. What should  be done  so  the  price  reflects in PR.
    what criteria  should  be  checked  and  maintained.
    Thanks  & Regards.
    Erfan.

    Hi,
    Please check whether the unit of price is same in both material master as well as in the PR.
    Regards,
    Divya

  • Delta update not working when i change material master data

    Hi SAP Guru's
    can any body help me in solving my issue.
    My issue is i created a data source with a function module to create delta in change date field LAEDA.
    .Full upload is working fine based on the selection screen but delta update is not working properly .
    it is working as full load run for every first run of the day.
    Please can any body help me in this.
    What i did in ECC.
    I copied the FM 'RSAX_BIW_GET_DATA_SIMPLE to Z function module.
    Done a select on three tables and passed the data into e_t_data
    In Rso2 i attached LAEDA filed after clicking generic delta field.
    after completing the steps in ECC
    Any help will be apperitiated .
    Thanks in advance

    Did you actually change the sold-to party though or just the payer?  The sold-to party's price list type controls the price list type value copied into the order header.  Even if the payer has a different value, it's not copied to the order header.  You can see this behavior in FV45KFKD_VBKD_FUELLEN.  If you switch sold-to's then you should get a pop-up that new pricing was carried out; you should also see your new price list type value in the order header and you can use the 'analysis' function at the item level to verify that the correct price was used.

  • Payment method not defaulting from Vendor master data

    Hi All
    I am running F110 payment run. In the Payment proposal SAP  is not pulling payment method from vendor master data for some invoice. we have like two payment methods , Sap is defaulting payment method for one type of payment method and not defaulting for the other...What could be the possible reasons?( for both the invoices We are not maintaining any payment method)

    Hi
    In F110 if payment methods are different from vendor master data and payment methods mentioned in parameters tab it will take payment methods from parameters tab, so that you have to give both payment methods in parameters tab so that it will consider both.

Maybe you are looking for

  • Help: No Parameters, HTML Output from Java Servlet

    I have a Java Servlet that reads parameters passed from an HTML form and displays them to another HTML page. I know the servlet is being invoked; however, I am not seeing any HTML output. Sending the output to a file reveals the parameters are coming

  • HP Envy 4500 won't print from computer

    Hi, My HP Envy 4500 has been working perfectly for quite some time now.  Unfortunately, it has stopped printing from my Dell laptop, running Windows7. It scans to the laptop just fine.  It copies fine, and it prints from my iPhone fine. I have looked

  • Simulation of FB01/F-43 (Before posting) available?

    Hi All, I'm uploading a file to post vendor documents via FM "POSTING_INTERFACE_DOCUMENT". This is called from a custom program. In short, the logic is to loop at file data and call this FM in the loop to post vendor documents. Every line of the file

  • Menus in Smartview

    Hi guys, We have some right click menus in forms that run several business rules, open reports, and instruction documents. All of these work fine when i go through workspace or through planning. But, we are not able to open the reports and instructio

  • Problems with vidoes on facebook

    This is happening with FF 4 and the previous (at least). After I watch videos on facebook (1 or more), specifically ones from youtube, whether I play them through or stop them, then click a poster's photo, any and all videos played previously, will a