Sales Order header update

Dear Friends,
Every time when I create a Sales order after saving , I have to press the update button  in the Header and carry out new pricing B for the header condition type to be activated. is there a way tye order is updated automatically .
Please guide..
Thanks Ravi

Hi
Check the Pricing date in the order. It should be by default to-day's date. So that system will take to-day's price.
To deafult to-day's date as the Pricing date, in VOV8, for your Order Type make the field Default Pricing date as Blank.
In standard setting, system should take the new Pricing.
Check in Customising for your Pricing Procedure whether any specific Pricing Type has been assigned. If no Pricing Type has been assigned to your Procedure then system by default take Pricing Type B (carry out new pricing).

Similar Messages

  • How to update the sales order header & item data in TM system

    Hi Experts,
    Greetings!
    I need your help,I have a one requirement sales order data came from ECC these sales order data need to update in TM Sales order header table as well as item table also these fields are additional fields.
    Can anyone please guide me I am very new in TLM .
    Thanks in advance.
    Thanks&Regards,
    Siva.

    Hi Siva
      "/SCMTMS/TRQ~ROOT" is for sales order header and "/SCMTMS/TRQ~ITEM" is for details.
      I assume you need to
    enhance the structures for these nodes to hold your add. fields;
    and do the same for the input parameter of service TransportationRequestRequest_In (which is used to create OTR) from PI side;
    Pass the add. fields during service call (impelment in ERP system);
    Map the fields from service paremeter to node attribute (implement in TM system, BAdI   /SCMTMS/TRQ_SE_TPNRQ_REQ~CHANGE_MODIFICATION create modification table for the input parameter).
    I cannot find source code for all of that; hope it helps.
    Sensen

  • How to update TEXT in Sales order header

    Hello ,
    I have requirement in which I am creating SO via IDOC calling BAPI_SALESORDER_CREATEFROMDAT2.
    Question: Can any one help me in finding a solution to update the TEXT in sales order header which is confogured IN TEXT CONTROL in SD.
    I have tried various option using CREATE_TEXT but it is only updating STXH table , the text is not coming in the sales order.
    If someone knows about this , <removed by moderator>.
    Edited by: Thomas Zloch on Nov 15, 2010 4:20 PM - please do assign priorities > normal

    Sounds like a text determination config issue - have you assigned the text in VOTXN?  Have you run the text determination analysis from VA02 in the document?

  • Update Sale Order Header Text through Enhancement

    Hi Experts,
             I Have a requirement to update the sale order Header Text , when the sale order is opened in VA02 and saved.
    Here in I tried using edit_text, it updates sale order header text  directly in DB during run time even before the save action is completed.
    But I need to just fill the header text and that has to be saved during the save action only.
    I tried coding the same in the user exit (userexit_save_document) but this user exit gets triggered only when there is some changes made to the document when opened in VA02 & Saved.
    Is there any  user exist to pass sale Order Header text and save when save button is clicked irrespective of the document been changed or not.
    Thanks in advance
    Sathish

    Hi Brad Bohn,
        My actual requirement is to trigger an Idoc when the user goes to VA02 transaction and clicks save.
    IDoc gets triggered only when there is some changes to that document, that is through NAST table entry based on the output configurations in NACE transaction.
    Now that the user wants to trigger an IDoc even if there is no change (ie. to reprocess the IDoc) when he just opens a sale order in VA02 and click save.
    It is not possible to trigger an IDoc through configurations when there is no actual change in VA02 and saved.
    So it has to be forcefully sent by making some additions to the Order through coding, so I choose that Text box to fill some additional data and save .
    Kindly Let me Know any thing could be done for this scenario.
    Thanks in advance
    Sathish

  • How the sales order header status update?

    Hello,
    In the sales order header "STATUS" tab is there, under this status tab we can find OBJECT status if we click that object status it shows the Object number,Object category,status profile and status with status no. on which bases this status will update in the sales order header?
    my case is Status "10-xxxx" set automatically for some orders.
    Could you plz let me know on which bases, the status will be updated in the sales order?
    Regards|KS

    Hi
    SAPu2019S GENERAL STATUS MANAGEMENT FUNCTIONALITY
    General Status Management replaced order status management functionality in recent SAP releases (4.6C).  This discussion will address general status management, as this is how SAP allows user statuses for controlling objects in this and future releases.
    General Status Management applies to internal orders, project definitions, WBS elements, production orders and many other objects in SAP.  For the purposes of this discussion we will concentrate on status management for internal orders and WBS elements.  A list of all objects relevant for status management will be made available upon request.
    A status is an indicator that fulfills two functions.  First, it informs you that a particular status has been reached.  For example, an internal order has been created and released; a settlement rule has been entered; a particular business transaction has been executed, etc.  Second, it influences the business transactions you can perform for a particular status.  A status can allow a business transaction; allow a business transaction but issue a warning message; or prohibit a business transaction altogether.  If a warning message is issued it is up to the user whether the business transaction is carried out or not.
    Statuses can be used to control and communicate.  Statuses can be used in reporting (show me a report of all internal orders with a status of TECO, or technically complete).  Statuses can be used as selection criteria (select all internal orders with a status of CLSD, or closed).  Statuses can communicate the state of an object (ready for archiving, not ready for settlement execution).
    There are SAP standard delivered statuses that apply to all object types.  These are known as SYSTEM STATUSES.  CRTD, REL, SETC, TECO are examples of SAP standard system statuses.  SAP standard system statuses cannot be removed from use.  You cannot override the SAP system status with a user status.  You cannot change the behavior of an SAP system status.
    User statuses (or user defined statuses) exist in addition to SAP standard statuses.  User statuses are intended to augment or refine SAP standard statuses, not replace them.  There is no limitation to the number of user statuses that can be created.  Both system and user statuses influence business transactions in the same way.
    An object can have multiple statuses active at the same time.  A plant maintenance order can have released, preliminarily costed, work order printed and confirmed statuses all at the same time.  For SAP display purposes only one status can be displayed on the status line in master data screens, but it is possible to see all active statuses for an object at one time by drilling down into the master data screens.
    A STATUS PROFILE, or user status profile, contains individual user statuses and the business transaction rules defined for those statuses.  There is no limit to the number of user status profiles that can be maintained in SAP.  A user status profile is assigned to an order type or a project profile in configuration.  This user status profile is then defaulted into all objects that reference that order type or project profile.  A users status profile can be overwritten (or deleted) in an individual object (via native master data screens), but only if a user status has yet to be activated for that particular object.  Once a user status has been activated for that object the user status profile cannot be changed.
    HOW STATUS MANAGEMENT WORKS
    When an object (internal order, WBS element, production order) is created SAP assigns the system status CRTD.  MIT automatically releases the order, so the system status REL is also activated.  If there is a user status profile defined in the order type (or project profile) this is carried over into the internal order (or WBS element).  If not, only the SAP system statuses will apply to this object.
    When a user executes a business transaction for this object, SAP checks the user status to see if that business transaction can be executed without any additional influence from a user status, can be executed but with a warning message being issued, or cannot be executed at all.  SAP also checks whether the business transaction sets or deletes any other user statuses within the user status profile.
    A user status may also be maintained directly in the object master data.  Accessing the master data screens allows a user to manually maintain user statuses.  If necessary, an authorization code can be assigned to a user status to ensure that no unauthorized persons can change the status of an object.  Once changed, the new user status is fully active and acts no differently than if a business transaction set the user status.
    Status management and business transaction control only work with standard SAP transactions.  Z transactions will not show up on the business transaction list for an object.  The business transaction table is configurable, but SAP strongly recommends not changing that table.  SAP directly updates that table via support packs and it is often impacted during upgrades.
    Authorization codes / keys are available in user statuses.  The authorization code is checked only when user statuses are being set manually, from within the objectu2019s master data screens.  This ensures the user has the proper authorization to set that status for that particular object.  However, it is important to understand that SAP sets a user status in reaction to a business transaction it does not perform an authorization check.

  • Updating email address in Sales order header partner address -VA01/VA02

    I got the requirement to update the email address in Sales order-> header-> partner address.
    The mail address will be picked from ZTABLE and updated in header partner address through user exit
    I cannot find any field for updating email address in partner address in user exit "MV45AFZZ"
    Is there any other user exit/option to update email address in header partner address of sales order?
    Thank You,
    GM

    Hi Rajesh,
    I agree with you but this Scenario is different.
    Just as you have mentioned the address change will not reflect in the Old Sales orders but it should in the new Sales orders right??
    But that is not happening..The Address was changed say two months back and the new address is not appearing in the Sales orders created these days say yesterday or today..
    In such a case,what is should I check to get the address updated??
    Please advice.
    Regards,
    Sophia Xavier

  • Updating Sales Order Header Text

    Hello Experts,
    Could you please help me in knowing how to update or maintain the Sales Order Header Texts programatically while creation of sales Orders.
    Here the scenario is ---Sales orders are getting created inCRM and there they are maintaining some text from webshop. Immediately a sales order will also gets created in ECC.
    Now i would like to know how to do that from ECC side?? Please help...
    Br,
    Anil

    Hi,
    I guess you'd have to find a BADI or user exit to update the texts in ECC. Check which IDOC brings the data from CRM to ECC. And the segment that carries the TEXTs. Then in the BADI you may either pass the date to appropriate fields or call the SAVE_TEXT function module in update task.
    Regards
    Prasenjit

  • User Status update on Sales Order Header

    Hi all,
    I need to update the "User Status" on sales order header when a sales order is saved. As user status reside in JEST, what available user exits are there to change/insert new user statuses? I don't believe the common exits like MV45AFZZ would do.
    To clarify, to get to these user statuses, you go to the header of the sales order, select on the 'Status' tab, then click on the "Object Status" pushbutton.
    Any help would be greatly appreciated in the form of points!
    Thank you.
    Liam

    Hi Liam,
    In the Program MV45AFZZ in the FORM userexit_save_document
    you use the following fn module to change the user status
    'STATUS_CHANGE_EXTERN'
    Example
    IF t180-trtyp = 'H'.  "Only creation time
      READ TABLE xvbap WITH KEY matnr = c_matnr.
      IF sy-subrc = 0.  "If above material exist then change status
        LOOP AT xvbap WHERE cuobj NE space
                       AND  matnr =  c_matnr.
          l_objnr = xvbap-objnr.
          CALL FUNCTION 'STATUS_CHANGE_EXTERN'
            EXPORTING
              objnr               = l_objnr
              user_status         = 'E0013'  "Send ej IDOC
              set_chgkz           = 'X'
            EXCEPTIONS
              object_not_found    = 1
              status_inconsistent = 2
              status_not_allowed  = 3
              OTHERS              = 4.
        ENDLOOP.
      ENDIF.
      sy-subrc = 0.  "Restore the previous condition
    ENDIF.
    Reward if helpful *********

  • Function Module to update the sales order header status

    Hi,
      I am looking for a function module to update the Sales order header status.
      Pls. let me know if anybody has used any FM to update the SO status.
    Thanks,

    By mentioning status do you mean Object status or Document status??
    For Object status you may use FM: STATUS_MAINTAIN
    For document status it changes according to flow.
    Regards
    Eswar

  • WBS Element ( Billing element ) assignment  at sales order header level

    HI,
    There is provision of assign WBS Element at sales order header as well as item level , If Project WBS Element is assigned for each line item delivery  and stock updating is happening from the project, But WBSE will assign at sales order Header  system will not allowing to create project delivery( moment type 601Q), and stock updation ftom project.
    Please let me know how this will happen ,
    Regards,
    Gangi
    Edited by: Gangi Reddy Botchu on Jul 7, 2008 4:50 PM

    SPRO - SD - Billing - Billing Plan - the first 5 config nodes (Define Billing Plan types / Define Date descriptions / Assign Date categories / Maintain Date Proposals / Assign Billing Plan types to Sales Doc types) are applicable to you.
    this is pretty tranparent for a reference.
    What else is required?

  • Sales order header data change by using the ORDERS05 IDOC

    Hello Team
    I am getting sales order number and some code value from the legacy system. i need to check whether the sales order is avialable in SAP or not. if it is there, i need to update the CODE value (ie for example ABC100) in sales order header data> order data> your reference field.  For doing this i am using the IDOC type ORDERS05 and message type ORDCHG message type.
    Now i want to know what are the mandatory fields which i need to do the mapping for the IDOC ORDERS05, to change the sales order header data. please check and suggest me the required fields of the IDOC to be mapped, so that i can change the sales order header data.
    Please correct me if i am doing something wrong here.
    Regards
    Rj

    Hello chirag
    Thanks for your reply. My requirement is to change the sales order which is already avialable in SAP. Just i need to change the header data of the sales order, for example if i am getting the sales order as 1000 and CODE as ABC100. i need to change the Sales document number 1000 and put the code ABC100 in sales order header data>orders data>your reference field.
    So now i want to know the below points
    1. what are the mandatory fields for which i need to pass the values for the IDOC ORDERS05.
    2. what is the user-exit used for picking up those values from SAP because i am getting only sales order number and CODE values from legacy system.
    Please check and suggest me accordingly.
    Regards
    Rj

  • Sales tab in Sales order header

    Hello Gurus
    When i create a sales order and delivery number for my warehouse. the the 'Delivery status' field of Sales tab in the sales order header data is automatically getting updated 'Fully delivered' .If i create a sales order with out saving the entry and if i go to 'Delivery status' field to check for the delivery status it says 'Not delivered'
    Can you please let me know how this field is getting updated .Is there a config where i can control this .
    Thanks

    Hi,
    Once you create a delivery for the respective line item for same qty  the delivery status will be change to fully delivered.
    But when you create a sales order in VA01 and before saving you see the status its " Not delivered" because the line item deliver has not been donr ( delivery document not created). Its an standard SAP behavior.
    Also check the copy control in VTFA  in update document flow field at item category level
    Hope this will help you to resolve your query!!
    Regards,
    Krishna O
    Edited by: Krishna O on May 28, 2010 7:16 AM

  • Your Ref ship number in Sales order Header

    Hi all,
    I have a requirement to update Your Reference Ship number in Purchase order data Tab of CRM sales order(Header) with a number coming from an RFC destination.
    I am using  BADI ORDER_SAVE Method CHANGE_BEFORE_UPDATE to do the processing of RFC destination.I have used FM 'CRM_SALES_PUT_OB' to put the number in buffer but still its not updating the database table CRMD_SALES with number.
    Is there any FMs to update the same??
    Thanks,
    Srilatha

    Hi ,
    Try CRMXIF_ORDER_SAVE .
    Please tell if it works .
    Ajith

  • Creating multiple partner function for a sale order @ header level

    Hi All,
    I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
    Partner function ZZ can only occur  1 times in procedure TA (Sales Document Header)
    the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
    here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
    Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
    is there any other way of over coming this issue as we are updating the standard table. Is it possible??
    Thanks a lot in advance for your reply....

    I believe this is a configuration setting, based upon the details of your post.  Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item).  For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
    Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
    Edited by: DaveL on Aug 23, 2011 3:00 PM

  • Copying sales order header data into delivery line item

    Hi
    In copy control from sales order to delivery I want to copy value in sales order header to all the items in delivery, can I achieve this in the header level data transfer routine (Source sales document type to target delivery doc type i.e TVCPL-GRUAK)  or I have to do the changes in item level data transfer routine (TVCPL-GRUAP)
    The requirement is to copy a value from VBAK into LIPS during delivery creation
    Thanks
    Javed

    Dear Javed,
    Your requirement sounds interesting.
    If possible can you explain the scenario where we have to transfer the header data form order to item data in delivery?
    Also if you have found the solution, can you please update the same.
    Thanks & Regards,
    Hegal K Charles

Maybe you are looking for