Sales Order in Prod

Hi,
I dont have access to create a sales order in prod. Now i need to check the latest tax rates update carried out in pprod. Normally in dev and QA i would create a sales order and check the rates. So is thr any other way by which i can determine in Prod without creating a Sales Order that the new tax rates are in effect and the tax system is running.
Thank you,
sam

VK13, MWST condition type (or other type which you ise for taxes), click ENTER, if there are several tables attached to it you'll have to select the one you use OR check all of them one by one.
On the next screen provide values for mandatory fields (like destination country) and click enter again, you'll see tax rates and their validity period.
OR, find any order in your system created for the country you need and then check taxes in VA03 OR SE16 for VBAK, your order number, check KNUMV field, then SE16 for KONV table with KNUMV found above, check all condiiton records assigned to your order.

Similar Messages

  • Sale order - mtrl - prod ord ; table link

    hi,
    pl tell me a link through table and field -
    how to get a link between sale ord - item no. - mtrl - prodn ord no. - prodn posted qty.
    regards

    I have an understanding that you are in need of the tables for mat.no,prod.ord.and sales order to make a report to make them all appear in the report...
    If that is so,there is no need for tables..YOu can get that in standard SAP..
    Go to COOIS..enter the plant and execute.. In the resulting screen, go to chane layout. There u can add the sales order in the layout...material and production order will be there by default...
    Thus you can have the material,production order and the corresponding sales order in a single transaction...
    hope this clarifies...
    karthick

  • Restricting prod order quantity from being higher than sales order quantty

    Dear Experts,
       I create production order interactively through co08 ( prod order with respect to sales order). the prod order automatically picks up the quantity in the sales order which is desired, but this order quantity field in the prod order is editable (i.e can be made higher or lower). Please how do I restrict this prod order quantity from being  higher than the sales order quantity?i mean what should be done to make system disallow the prod order qty being fixed higher than thesales order qty?

    Hi,
    Even though you create the production in refernce to the SO, the order quantity can be alter.
    This is a normal behaviour of the system.
    To restrict any change in the order quantity, you can use tarnsaction variant for CO08. T code is SHD0.
    Secondly you can use the following enhancements to restrict the same,
    PPCO0006
    PPCO0007
    Hope this helps you.
    SmanS

  • Standard COGS cannot be Transferred from Sales Order to Billing Document

    I did a test in current client with the following steps:
    Create Sales Order for Configurable Material -> Execute Sales Order Costing Run, marked and Saved the result via CK51 -> Create Prodcution Order for such Sales Order -> Confirm Prod Order -> Conduct GR per the Prod Order -> Conduct Goods Delivery for the Sales Order-> Create Billing.
    (There is not any costing value during the whole process)
    There are many Value Fields in the CO-PA document regarding to this billing, the value of standard COGS items(including Material Cost, Period Machine, Variable Labor etc) are also included and their value are expected to be transferred from Sales Order. However,  in my testing, those COGS value failed to be transferred to Billing document. I am not sure whether there is any config related. (KEPC hs already been done in such case). Would any expert can help on that?

    en, It is solved now. Untick "Transfer aux. CC Split" in KE40, then the value can transported to billing.
    Edited by: Ying Zhu on Nov 18, 2008 1:10 PM

  • Make to order with Prod version with object depedency

    I m using 2 production version. In both case BOM & Routing having object dependency. Its make to order scenario. How can I select prod version in costing as well in configuration in sales order. Because by default its taking first version for both configuration & costing.How??
    And if I select second version in sales order, in prod order it should automatically take second version. How??
    Thanks
    varun

    Hello Varun,
    If you have two valid production versions for a part then by default system take the first available production version. You have give some selection criteria through quota arrangement.
    In ck11n you have the option for selecting the vesion in the quantity structure tab so i think there will be no problem for costing.
    For selection of production version in the production order you have work with planning strategy 82. Or incase of MTO (strategy 20) run MRP from MD50...your assigned production version in sales order will be planned.
    If helpful rewards your points
    Regards
    TAJUDDIN

  • Condition type missing in Sales order after client copy

    Hi All,
    I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
    My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
    Can anybody experienced the same problem before. If yes. please provide me the solution.
    Regards,
    Ramesh.

    Dear Ramesh,
                         I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
    As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
    Please check and revert.
    Venugopal

  • Link between Prod Order and Sale Order schedule line

    Dear all,
    Ours is a MTO (81).
    In Scheduling Agreement / Sale Order , there are multiple schedule lines for a single item .
    Production Orders are generated for every schedule line of the Item.
    The client wants to know (for a custom developed report) , against which schedule line of the Sched Agreement/ Sale Order, the Production Order is generated ?
    This Information can be seen in MD04.But  I am not able to fetch from the tables .
    The schedule line field (KDEIN ) is not updated in AFPO table & the order no (AUFNR) is not updated in VBEP table .
    Say,
    Sale Doc No : 42000506
    Schedule line/Dely date            Order qty          Prod Order No
    06.10.09                                    500kg               100170
    15.10.09                                    300kg               100171
    Pls give your valuable inputs.
    Regards,
    Sheik

    Hi,
    Only Sales Order No & Sales Order Item No is updated in the table.
    Whereas , I want to know the Sales Order Schedule Line no.
    Regards,
    Sheiki

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • MTO(Diff between complex make to order and sales order based mass prod)

    Hi
    We are using MTO...Can anyone tell me what is the Diff between complex make to order and sales order based mass prod in finance perspective?

    Hi,
    In the case of complex make to order scenario, through MRP, the Project shall be assigned to the sales order. Then there will be milestone billling and all. In the case of mass production MTO, it is only creation of production order for each sales order item and each sales order item shall have sales order cost estimate.
    Trust this helps much and do encourage our efforts!
    Cheers!
    Edited by: Ashok Singh on Oct 28, 2008 6:53 PM

  • User exit for checking creation of prod. order reference to sales order?

    Hi all,
    What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
    thanks.

    Hi,
    user exits:
    PPCO0003  Check exit for order changes from sales order
    PPCO0007  Exit when saving production order
    Regards,
    Vivek

  • Sales order and automatic release of prod order

    please tell me how a sales order can be automatically converted into production order by running MRP.
    please give me configuration details

    Hi Kumar
    Please letus know the planning startegy .
    If MTO  u can use planning startegy = 82,
    When  u create sale order for header material , assembly prod  order will be created automatically with out MRP Run.If u have Multi level Bom u have to run MRP.
    MRP will not create prod order directly, it will create planned order based on cutomer requirements, u have to convert it to prod order manually.   
    Regards
    Pradeep

  • Sales order Schedule line not showing in prod. order

    Hi
    I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number  (10) and schedule line number (0001).
    Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
    Regards
    Ganesh M

    Hi,
    When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines.  The schedule line number serves internal purposes and does not, for
    example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
    Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
    Regards,
    Santhamoorthy

  • Sales order based on prod order

    Hello,
    There is a sales order based on production order (one item).
    I just want to know what happens in CO once sales orde is posted?
    How many doc are created and of which record type?
    What kind of changes happens after the settlement of the order?
    Thanks

    no answer

  • Retrieving sales order info instead of the offer when creating a prod order

    Hi,
    I cannot create a production order refering to a sales order if this sales order has been created in reference to an offer. This is standard SAP and the following message is displayed: "account assignment cannot be carried out because of different origine number".
    Does anyone know how to retrieve the sales order information when creating a production order instead of retrieving the offer information? User-exit?
    Thanks,
    Ronan

    No answer to this post

  • Prod. order and sales order order link-MTS sceanrio

    Hi dudes,
    My client is using both MTO and MTS scenarios,
    to customize a report in costing they want link between production order and sales order. Its readily available in MTO sceanrio but in in Make-to-Stock scenario how to get this link.
    Please if any enhancement or some other way to get it..
    thanks in advance...
    Robert.

    Robert,
    I will assume that you have already informed your client that this report is nonsense (Make to Stock by definition cannot be linked reliably to a Sales order).  Oh well, the client is always right!
    Make sure you include in your solution
    1.  How does he want to account for the business scenario where one production order ends up supporting more than one sales doc (and yes, it will happen).
    2.  How does he want to account for the business scenario where a production order is received to support Safety Stock (might not happen if he doesn't use SS)
    3.  How does he want to account for the business scenario where a production order is received to support a forecast, but there is not yet any sales doc (might not happen if he doesn't use forecasting)?
    4.  How does he want to account for the business scenario where the production order is received into stock, and the sales department decides to use the stock for a different sales order?
    Item 4 would only be an issue if the report is run prior to the sales order being shipped.
    Regards,
    DB49

Maybe you are looking for

  • IMac using an external hard drive via usb 2.0

    I am currently using a brand new 20" iMac with 4GB of ram and since this computer only has one firewire 400 port I'm using that for the deck and plugging in the external hard drive via usb 2.0, but I do have the option of plugging in firewire 400 to

  • Bring back Duplicate page.

    Hey, Apple Pages peeps. Bring back Duplicate page. The new version offers Duplicate Selection, but not an entire page, which used to be available in thumbnail view.

  • Should every SQL query have its own event and command?

    Hello, I am developing an application using Cairngorm. My app uses SQL databases. I'm creating a separate event and command for each SQL query my application requires. I end up with many events  and commands - twenty different event/command pairs and

  • Playlists refuse to transfer onto ipod

    I just got over the whole "10.4.11 grey screen" incident and now my ipod wont accept playlists. It transfers everything else. It does photos, videos, and all my music. For some reason it wont copy the playlists. My most used feature. I hate shuffle d

  • Trying to take Old Movies to make Xmas iMovie. Help!

    Had a Service transfer many reels of old family movies (in no particular order) onto DVD discs. Goal is to edit out clips I don't want, move clips around, add music, etc. to create a family story. I transferred files from both DVD's into Movies folde