Sales order item rejected in third party SO -although the PO is done comple

The user has rejected a sales order line for total qty instread of just rejecting the undelivered qty. This is third party order and the line has a PO associated with it.
The GR and IR have been completed on the PO.
There was a warning message to delete the PO line first before rejecting the Sales order line, but the system still allowed the user to reject the item.
Now, when we try to remove the reason for rejection ..the system says to delete the PO line. Here, the system insists and an error message is resulted.
We run a customized booking report for sales order and the report now shows negative net value as year to date revenue since we rejected the item. The business does not want to see that -ve value since it gives a meaning as though business incurred loss.
The booking for this line has been done long ago when the order was booked. The net effect would have been zero had we rejected the item in the same period. Now, it is -ve since we are rejecting the item in some other period.
What could be best solution ? Do we need reverse vendor invoice, goods movement on PO and then delete the item ? As last step, remove the reason for rejection on sales order?
Are there some OOS notes to remove the reason for rejection on the sales order without distrubing the PO and other subsequent docs.
Regards

Hi Friends
I have resolved the problem myself. I have used sap note : 97272 and downloaded the utility/ correction program ZZUNREJE and ran it for rejected sales line item.
The reason for rejection was successfully reversed without touching any of the associated POs.
Regards

Similar Messages

  • Bill Plan with Sales Order item rejected

    Milestone Billing Plan created.
    IMG Config Sales Order Item Reason for Rejection = BIC checked (Not Relevant for Billing)
    Add material on the (Billing Plan) Sales Order Item.
    Set the Item Reason For rejection (same reason as set in IMG config for BIC above)
    Create some Billing Plan dates (at the sales order header).
    [F3] back. You get an info message "Value-based differences in the billing plan cannot be allocated"
    Save the Order.. All is fine.
    If I do not set a reason for rejection on the item all is fine.
    Can anyone explain this ?

    Hi Friends
    I have resolved the problem myself. I have used sap note : 97272 and downloaded the utility/ correction program ZZUNREJE and ran it for rejected sales line item.
    The reason for rejection was successfully reversed without touching any of the associated POs.
    Regards

  • Auto trigger of Purchase requsitions in Sales Order in case of Third party

    Hi,
    In a third party sales scenario, where do we set the automatic creation of Purchase requsitions when we create a third party sales order. I checked the Item category configuartion but couldn't figure it out anywhere.

    Hi Ronaldo,
    In Scheldule Line Category, for the Purchase Order Type,Please select the Options Related to Purchase Requestion.So that we you create the Order automatically the Purchase Requisation Number will get generated.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Sales Order Item rejected but still reflects in Prod. Alloc. Display in APO

    A line Item in the SO was rejected but it still reflected in the Prod Alloc display character combination per period in the APO.

    Hi Friends
    I have resolved the problem myself. I have used sap note : 97272 and downloaded the utility/ correction program ZZUNREJE and ran it for rejected sales line item.
    The reason for rejection was successfully reversed without touching any of the associated POs.
    Regards

  • Update Purchase order number in Sales order item level from inbound ORDCHG iDoc

    Hi Gurus,
    I want to update purchase order number from the iDoc 'ORDCHG' to sales order item level (sold to party purchase order number) i.e, VBAK-BSTKD.
    Which exit I need to use?  where to update?  Can you please help.
    Thank you in advance.
    Regards,
    San

    Finally Resolved the problem by writing 2 exits.
    one exit 'EXIT_SAPLVEDB_007'  for identify correct item in the sales order by updating the customer purchase order item number i.e., VBAP-POSEX.  if we update the POSEX field then it wont create new item instead, it will update the item which it is referring to .
    2nd exit for updating the purchase order number. 
    I have tried to pass the program name, screen number, field name, field value etc to bdcdata in the exit 'EXIT_SAPLVEDB_002'. but I observed that it is not going to that screen in the debugging.
    when I try E1EDP02 with QUALF '044' it will update ship-to party's purchase order number.  so to update ship-to party's purchase order number it is going to that screen. 
    so I have used that thing to update purchase order number in sold-to party's purchase order number.
    so when it is going that screen iam changing the field name 'VBKD-BSTKD_E' to 'VBKD-BSTKD' in bdcdata.  Then it is worked.
    This is the solution I found in my time.
    Any way it is solved.  Hope it will be helpful for others who will get this problem.

  • Table Name to take report of Open Sales Order items&its relevant GL Number.

    Hi,
    I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
    I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
    Any pointers on this will be appreciable.
    Rgds,

    Hi
    There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But  by creating your own report using LIS then it is possible
    Regards
    Srinath

  • How to copy sales order item text in to purchase requisition

    Hi Experts,
    We enter text for the sales order items in the sales order item details.
    we have done settings for the purchase requision to copy text from sales order into purchase requisition and this works for purchase requisitions automatically created from sales order.
    we need to get text from sales order to be copied in purchase requisitions which are created by converting the planned order.
    we have tried SPRO settings SPRO->Materials Management>purchasing--->text for purchase requisition.
    but this settings does not works for Pur Req. created by converting the planned order.
    is this because planned order does not have segment for text like sales order and purchase requisition?
    Please let me know if it is possible through standard SAP or with the lease development, any help will be appreciated.
    Thanks
    Anand

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • Sales order item ontime delivery status at order level in Cube

    Hi Guys,
      We have a requirement, currently we have sales order item information in cube where we have some thing called OTD status
    this status is based on actual GI date and requested date so we have 3 staus at each sales order item level ontime, early, late
    but now the requirement is to change the order status either to ontime or late and this status should be at order level instead of
    order and item level, if any one item in order is late then the whole status of order should be late and if on time or early then it
    should be ontime, is there any why to achive this except adding new character in cube or creating new object in system???
    or if not by just adding new character in cube like order status by remodeling and populate data with customer exit?? pls note
    that we are not using 2lis_11_VAHDR we are using 2lis_11_Vaitm only.
    thanks,
    chandra.

    hi Chandra,
    We had similar kind of situation. but you need to implement the logic either by remodelling or creation of new object.
    What we did was as under.
    - Created new DSO with just Order no and the status.
    - After VAITM Delta load - by making it datamart we forwarded the data to that DSO and had the Status logic put up there so you dont need to change the existing model and you have the status at order level in other DSO.
    - this DSO was than included in Multiprovider for further reporting puprose.
    -This way you have very less things to manage and no need to further enhance exisiting model. This status logic may change in future and you have flexibility to do so easily in the system.
    Hope this helps.
    Regards
    Raj

  • Collect cost against sales order / sales order item

    Dear All
    Is it possible to collect costs against sales order or sales order item. 
    The cost is no.of hours the employee booked time against sales order / sales order item.
    Regards
    Deepu Pillai

    Hi,
    Yes. The Sales Order Item can be made cost object to collect the cost. But your requirement is to charge the customer for the no of hours employee worked on that sales order. Through condition type, you can book the expenditure and invoice the customer accordingly. It is purely SD area.
    Trust this helps much!
    Cheers!

  • Upload sales order item data

    Hi All,
    I need to upload sales order item data.Could you please tell me the steps in R/3 to replicate data BW.
    Thanks
    Raj

    Hi,
    Steps to upload sales order item:
    1) Maintain extract structure (LBWE)
    2) Maintain Datasource. (LBWE)
    3) Replicate datasource in BW
    4) Assign Infosources (RSA1 - BW)
    5) Maintain comm struc/transfer rules (RSA1 - BW)
    6) Maintain infocubes and update rules (RSA1 - BW)
    7) Activate extract structures (LBWE)
    8) Delete setup tables / setup extraction (For deleting – LBWG and for setup use OLI7BW).
    9) Infopackage for delta init
    10) Set up periodic V3 update (LBWE)
    11) InfoPackage for delta load.
    Hope this helps.
    PB

  • How to configure Sales order item text copy to Purchase requisition item

    Hi,
    How to configure sales order item text copy to Purchase requisition text then copy to PO item text.
    Regards
    Jack

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • Net price calculation for a sales order item

    I am sending the input to BAPI_SALESORDER_CREATEFROMDAT2 for a sales order item with a customer expected price and the material number (pricing group is not being filled in). When the sales order is generated, I see that net price is different from the expected price and the price is being obtained based on the material number that is being given as input. I want to know at what point of code the net price is calculated?  I tried to debug and see but with the numerous userexits and BADIs in the calls I am not successful yet. Any input is appreciated.

    It goes through different pricing routines but the start will be in function module 'PRICING'. Put a break point and run your BAPI or go to tcode VOK0 - find the condition and routines.
    Pricing will be calculated based on customer and material.
    Previous answer is pretty good, you need to fill item conditions in table in bapi also header conditions if you are using header pricing.
    Anyways, first of all create your order from VA01 and see the netprice in conditions. again, the pricing will also depends upon region of customer and material.

  • Pop up when Sales order item partner is changed

    Hi,
    Can we get a pop up when a partner function in sales order item line is changed which should display the text maintained for the customer in XD02??
    If so please let me know..
    Thanks & regards,
    Santhosh
    Edited by: SS on Jun 8, 2009 3:27 PM

    Hi..
    Put option C there & save.
    This filed defines result of ava chk in sales order.
    (Rule for transferring the results of the availability check
    Specifies for a particular sales area how the system reacts when the availability check determines that the inventory is insufficient to satisfy the order quantity.
    Use
    When inventory is insufficient, the system can react in one of two ways:
    The system presents a pop-up window and you choose from different alternatives, or
    The system automatically proposes one of the alternatives (no pop-up window appears)
    Example
    The system can, for example, automatically confirm the delivery proposal. The delivery proposal consists of the quantity that is available for delivery by the requested delivery date.)
    Also make sure in OVZ8 you have ticked Av Chk for your schedule line category
    Regds
    MM
    Edited by: MANOJ  MAHAJAN on Oct 26, 2009 12:21 PM

  • In third party sales order process how  business come to know that the vend

    Hi SD Gurus,
    In third party sales order process how  business come to know that the vendor has delivery the goods to the customer?
    Where Business will check whether Vendor has delivered the goods or not to the customer?
    Thanks & Regards,
    Nivas

    Hi,
    Process
    VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
    When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
    Kapil

  • Rejected sales order item after partial invoice

    Dear All,
    We have a partially invoiced (and paid) sales order. Now the customer (and we) wants to cancel a sales order item. So we set reason for rejection at item level. In VA05 it still displays the SOI as open and status is being processed. How to proceed, it should not be displayed as open when it is rejected in VA05.
    Can I change the billing plan so that the invoice does not mind the items I want to reject should I ste a billing block? Delivery Block?
    Best regards,
    Michaël
    Edited by: spimic on Oct 5, 2010 6:21 PM

    Hi,
    Take the help of ABAP'er, and explain him that as soon as sales order is invoiced(partially), set the rejection reason to sales order.
    And also define the rejection reason and assign these rejection reasons to billing types.
    Regards
    Ashutosh

Maybe you are looking for