Sales Order item should not be allowed to modify after doing PGI.

Dear all SAP experts,
When i create a sales order say for 10 pieces. Now I have created the delivery for all the 10 pieces & also created the invoice.
My requirement is when i create a delivery for all 10 pieces then after doing the PGI the system should make the sales order line item & qty "grey" - I should not be able to change the sales order item in any respects.
If not from delivery then when i save the invoice for that sales order then I should not be able to modify the sales order item & qty.
With best regards,
Allabaqsh G. Patil

Hi
I think there can be a problem in copy control
In copy control at item level, in teh item category, ensure that the field "Update document flow" and the Pos/neg quantity are properly updated.
Update document flow shoudl be ticked on
Pos/neg quantity should be positive.
Before doing this , check teh document flow of the sales order. Do the same after doign this configuration. Note the difference.
This will solve your problem

Similar Messages

Production Order Usage Probability should not be allowed to change after GI

Dear Gurus,
pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this.
Thanks in Advance,
Regards,
Dev

Hi,
Can you elaborate little bit more?
Regards,
Sankaran

While creating sales order stock should not go under reserved block,

While creating sales order stock should not go under reserved block,
What is the customization?
Please help me.

Hi,
What exactly is your requirement?
Can you be a bit more detailed?
Thanks

Sales order item quantity not rounded and allowing decimals with UoM EA

Hi gentlemens,
I noticed something strange in our SAP ERP system.
When we enter a material in a new sales order item, we are allowed to enter quantity 1,5 EA (1 and half Each).
But when I check the config of the UoM EA in table T006, the number of decimals (field DECAN) is 0 and the decimal place for rounding (field ANDEC) is also 0.
As far as I remember from other other SAP system, there should be an error message when entering the quantity 1,5 EA saying that decimals are not allowed for this unit of measure.
Can someone help and tell me wich error message or which rounding program should normally be active when entering decimals with uom EA ?
Thanks and regards,
BDT

Hi Mani,
Thanks for the thread reference. I found the related OSS notes yesterday evening but this was for procurement.
Here the question I have is more for a sales item.
The strange case we are facing is:
In a sales order, we can enter a particular material as a standalone item with a quantity of 1.5 EA without any problem.
But if we create the same new item as a sub-item of a previous one (filling UEPOS), with qty 1,5 EA, then a rounding is triggered by the system based on the T006 config.
I am wondering if this is a problem with the SAP standard program or if we did anything wrong in the past in our system?
Best regards,
BDT

Delivery block at item level in sales order,Qty should not be confirmed

Dear all
We have a below requirment
We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
Can you give us solution
Regards
Sudha

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

Stock Should not block in sasles Order,Sales Order stock should not Reserve

Stock should not reserve againest sales order, system should show the status confirm quantity or not,
How to Configure this for this scenario?

HI,
To map this scenario u hav to maintain the config settings for TOR and avaliability check for that document type and material and if u want to see the status confirm quantity or not use tcode MD04 or table VBBE is useful for u.
Regards,
kishore.
Edited by: kishore gopala on Feb 26, 2008 6:16 AM

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

Purchase Order item text not present in accounting documents after MIGO

Hello all,
in ECC 5.0 I create a PO using ME21N. Afterwards the GR is done with MIGO.
For the moment the PO item text is not transferred to the FI documents. The field BESEG-SGTXT is empty. Is there a possibility to copy the text during GR from the PO item to SGTXT?
In fact I am looking for a customizing path and not a User Exit.
Thanks and regards
AD

Hi,
You can fill the field header text on the 'Details' tab
(This is field INVFO-BKTXT) and this field will be copied into
the FI document fields BSEG-SGTXT for the vendor line and BKPF-BKTXT.
You can fill directly the field SGTXT for the account lines ( if you
post directly to an account) and for the purchase order lines."
Also please review attached notes.
453027 MIRO: Segment text for vendor line
366412 MIRO: Enhancement LMR1M004 item text
MIRO and the FI Enjoy transactions were designed seperately to meet the
needs of their respective components - FI and MM. As they were not
designed in conjunction, there are differences in their functionality.
Not all information in one component will be updated in the other.
Best Regards,
Arminda
Please also review attached note 42615 as this explains how settings
in transaction ob14/ob41 effect the field INVFO-SGTXT in Miro.

Order QTY should not exceed than reference document

Dear Gurus,
I am creating a Release order with reference to Contract. Ex. order qty is 100 in Contract, while doing sale order it should not allow to change the order qty more than 100 [not more than Ref. document qty]. I have tried in VTAA, completion rule.. but it still allows.
Pls thro some light on this.
Regards
Praveen...

Hi Sreebha,
DO NOT COPY PASTE OTHERS STATEMENT
Check the below link from where it is copied:[Lock Quotation Changes when Sales Order is already Created;
Regards,
Amitesh Anand

Mandatory partner function at sales order item level

Hi all,
I'm customizing partner schema at item level for sales order. I have created a custom partner function, I put it in a new sales order item partner procedure and i set this partner function as mandatory (I want that system show me a message if this function is missing at item level in sales order). This partner function is defined only at sales order item level (not at header level or customer master).
If i create and save a sales order with an item type that use the item partner procedure I have created, system don't show me any message for the item custom partner function missing, else if it is set as mandatory in sales order item partner procedure.
I have read some posts in these forums about this functionality, but it seems a different situation.
Someone had a similar type of problem?
Thank you in advance for any possible suggestion.
Regards
Gianpaolo

Hi,
First you have to create a new partner function.
Then assign that partner function to the account group.
Then assign that partner function to partner determination procedure for the item category.
Over here click on the mandatory button also.
Then assign that partner determination procedure to item category.
Then to XD02 and give your customer number and in the partner tab maintain the data for that partner function.
Now go to VA01 and create your sales order you will see you partner function.
If you wont have maintained it in the customer master then it will prompt an error.
Regards
Raj.

Sales Order Item Shipping point (VBAP-VSTEL) value in APO table

Hi,
I am looking for Sales Order Item Shipping point (VBAP-VSTEL) value in APO.Can I get this info in APO ?
This information is not available in table /SAPAPO/SDORD or /SAPAPO/SDFIELD.
Basically table /SAPAPO/SDORD is completely blank. Table /SAPAPO/SDFIELD has entry for Sales Order Item but not for VSTEL. Shipping point is there in the Catalog table in ECC and I can see that it is getting imported to APO but why it is not avaibale in SDFIELD table.Any idea ?
I cheked table /SAPAPO/SHIPPING also for the guid (Item guid) but not found any entry .
Please help.

RKS,
Most data in SCM is not stored in tables, it is stored in LC. In general, it is not the best idea to use APO for creating custom reports against transactional data. You do such reporting in the OLTP, and you use the standard SAP programs to keep these systems in synch.
Some SD auxiliary data is sometimes stored in /SAPAPO/SD_DOC.and /SAPAPO/SDFIELD. Check here, you might find something useful. No guarantees......
Best regards,
DB49

Changes to sales order item not reflected if Call Transaction is used

I m updating another Sales Order item quantity and reason for rejection programmatically from another sales order.
The code is working fine and the quantity does get changed as well as the reason for rejection flag get set (if required). But if I go to the change log from the menu in VA02 for the order item which has been changed. It does not record the changes.
I have tried using both BDC call transaction method as well as BAPI_SALESORDER_CHANGE in neither case the change log for the order which has been changed reflects the programmatically made changes?
What m I doing wrong. Here is the code.
IF v_update_order_flg = 'X'.
      REFRESH t_bdcdata.
      CLEAR s_bdcdata.
      REFRESH t_messtab.
      PERFORM bdc_dynpro USING 'SAPMV45A' '0102'.
      PERFORM bdc_field USING 'VBAK-VBELN' <wa_r_rtb_posnrs>-zrtbvbeln.
      PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
      PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
   For Going to specific Item Number
      LOOP AT t_schedule_lines.
        PERFORM bdc_field USING 'BDC_OKCODE' '=POPO'.
        READ TABLE t_item_in WITH KEY itm_number = t_schedule_lines-itm_number.
        PERFORM bdc_dynpro USING 'SAPMV45A' '0251'.
        PERFORM bdc_field USING 'RV45A-POSNR' t_schedule_lines-itm_number.
        PERFORM bdc_field USING 'BDC_OKCODE' '=POSI'.
        PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
        v_ro_qty = t_schedule_lines-req_qty.
        CONDENSE v_ro_qty.
        PERFORM bdc_field USING 'RV45A-KWMENG(01)' v_ro_qty.
        PERFORM bdc_field USING 'VBAP-ABGRU(01)' t_item_in-reason_rej.
      ENDLOOP.
      PERFORM bdc_field USING 'BDC_OKCODE' '=SICH'.
      v_call_transaction_flg = 'X'.
      EXPORT v_call_transaction_flg TO MEMORY ID 'call_transaction'.
      CALL TRANSACTION 'VA02'
                   USING t_bdcdata
                   UPDATE 'S'
                   MODE   'N'
                   MESSAGES INTO t_messtab.
      v_call_transaction_flg = space.
      FREE MEMORY ID 'call_transaction'.

Hi Srikrisna,
This is a typical problem with BDC for updating QUANTITY and CURRENCY fields.
You need to create a character variable of the same length as your quantity field. Move your quantity value to the newly created Character variable.
Now use this new char variable in the BDC.
This correction should solve your problem.
NOTE: BDC RECOGNIZES CHARACTER FIELDS ONLY.
Regards,
Prakash Pandey

Item number in sales order versus delivery not equal

Hello Guru's,
Please help me solve this problem, i created a sales order with 6 items in it and save it. Before I create the delivery I deleted the sales order item number 1,2 and 3 so the item that was redy for delivery are sales order items nubmer 4,5 and 6. When i created a delivery for this materials the item number that was in it is not 4,5,6 but 1,2,3 so the item number 4 in the sales order was considered as the 1st item in teh delivery. What will I do in order that when i create a delivery for a sales order it will capture the item number maintained in the sales order.
example :
sales order-
item   material number material description
1              123                      abc                           deleted
2               456                     def
3               789                     ghi
delivery
1               456                     def
2               789                     ghi
it should be
delivery
2               456                     def
3               789                     ghi
please help..
thanks.

Hello Ysabella,
Your requirement is justified since the numbering in the sales order would usually follow the sequence given in the customer's purchase order. If there are a lot of items in the PO, and if this sequence is messed up, then the customer would lose track of what he/she ordered and what he/she received.
To ensure that the item number from the Sales order is copied to the delivery, all you have to do is set a flag in transaction VTLA at the header level - 'Copy Item number' (V_TVCPLAK-POSVO).
I hope this helps you solve the problem.
Cheers
Nikhil

Project Revenue Plan Not Update from Sales Order Item

I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
Regards,
Venkat.

HI Venkat,
You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
After the new credit limit is set execute the following steps:
u2022     Go to the t-code Change billing request (VA02)
u2022     Open the required billing request
u2022     Remove the account assignment of WBS element from each line item
u2022     Save the billing request
u2022     Reopen the billing request in change mode
u2022     Reassign the WBS elements to all line items
u2022     Now the changed credit limit will take affect
u2022     Check the Planned Revenue for the said project in CNS41, it should get updated.
Rgds
Deepak

Sales Order item should not be allowed to modify after doing PGI.

Similar Messages

Maybe you are looking for