Sales order level partner Function error

Hi,
I created New Partner Function ZB (Agent ) and also i have done partner Determination
According to my client requirement each customer having more than 2 agents so i have assigned in the customer master
Coming to Sales order, i created sales order , for that customer has 3 agents from header level system is picking one agent and coming to line items ( i created one line item ) system is not showing 3 agents its showing i tried manual entry also
bcoz i am giving agent commission to those agents based on the sales
plz guide how to solve the issue

Hi,
By using the path specified below,
SPRO>Sales and Distribution>Basic Functions>Partner Determination>Set Up Partner Determination-->Set Up Partner Determination for Sales Document Header.
Click on "Partner Determination Procedure Assignment".
Check the partner procedure assigned to your Sales order type.
Click on "Partner Determination Procedures".
Select the Partner procedure noted earlier.
Click on "Partner Functions in Procedure".Check whether "ZB" is there in the partner functions list or not.
Click on "Partner Functions".
Select the entry "ZB".Ensure that there is no tick mark for the field "Unique".
Regards,
Krishna.

Similar Messages

  • SPL block when changing the Address manually at Sales order level

    Hello all,  I hope every one doing well
    I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
    I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with  as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
    I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
    Please let me know  how to resolve it.
    Is it related to configuration  if yes how  ? pr
    do we  have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
    or
    do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
    manually at sales order level ?
    Thanks in Advance
    NVR

    hello Sameer,
    1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
    2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
    3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
    - yes
    What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party  ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
    please let me know if any once come across this sistuation..
    Thanks in advance
    NVR

  • Do you know the link between the sales order item and functional location ?

    How know the functional location if I know de sales order number and item ?
    Wich table or bapi ?
    Tks.

    Hi,
    I think there's all details in my question.
    You answer is right only if I need to know the functional location at AUFNR level.
    Is not my case, I need this information at sales order level.
    Regards,
    Roberto.

  • Route not determing automatically at sales order level for some sales order

    Dear All ,
    Route not determing automatically at sales order level  for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
    I have checked all the forums but didn't find any solution for the same.
    Looking for your inputs .
    Thanks inadvance
    Regards
    Venkat

    Hi
    1. Copare the Routes which are Automatically determined and which are not automatically determined
    2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
    SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
    Thanks
    RB

  • Availability check at sales Order level

    I am working in retail project and we have Cash sales, Rush order, Standard order scenario. All articles are created as Trading articles HAWA.
    When we create a sales order with cash sales document type, Rush order the availability check happens at sales order level itself but if I use the OR document type the availability check happens at delivery document level not at sales order level
    I want the availability check to be happening at sales order level so I have marked the availability in VOV6 for schedule category CP and CV.
    I donu2019t have the stock for the material X and we have not created any purchase order for X material but system is giving the confirmed delivery date with OR document type. So I have marked the check without RTL in OVZ9. After this system shows the confirm delivery qty is 0. 
    I think if the availability check happens without replenishment lead time then only I can get the output as per my requirement
    Can anyone guide me is it the right way to address this scenario

    Hello,
    Cash sales --> The detail configuration that has to be made for Cash sales are as follows:
    1.  Create a new order type ZBV by Copying the BV Standard Order and in the functionality of ZBV activate immediate delivery.
    2.  Create a new category ZBVN by copying item category BVN and check whether credit active unchecked or not in ZBVN.
    3.  Make all the neccessay setting for the item category determination for cash sale for which u configured.
    After the delivery document is created in the background, billing document is generated wrt Order.
    Rush order -
    >
    1.  Create a new order type ZRO by Copying the RO Standard Order and in the functionality of ZBV activate immediate delivery.
    2.  Create a new category ZTAN by copying item category TAN and check whether credit active unchecked or not in ZTAN.
    3.  Make all the neccessay setting for the item category determination for Rush order which u configured.
    Please remember here the goods has to be picked and then PGI has to be posted. Then only you can bill the Order.
    And for standard order process, please refer the below link:
    [Standard order scenario|http://help.sap.com/bp_blv1600/V5600/BBLibrary/Documentation/148_BB_ConfigGuide_EN_IN.doc]
    Regards,
    Sarthak

  • Would like to reserving the materials @ sales order level

    hi
    I would like to know the configuration settings for reserving the materials @ sales order level.
    if there is stock 100 pieces of material X , customer A wanted reserve 50 pieces of X , so when sales order is created remaining 50 only are shown as available stock & and the reserved 50 pieces by Customer A should not be confirmed or allotted to any other customer by the system
    Regards
    Dinesh

    Hi,
    When you create the material in MM01, in MRP 3 screen in strategy group you select "40 - planning with final assembly." Now when you create the sales order for customer 'A' then 50 will be allotted for that and remaining will be free.
    <b>For remaining 50 pieces:</b>
    In IMG-Sales & distribution-basic functions-availability check & transfer of requirements. Here with the help of the PP and MM consultant you can make the remaining settings.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

    Hi Experts,
    While deleting a sales order giving run time error.  PFB runtime error details.
    If you know any OSS message, please let m know. I tried, but there is no luck.
    Short text
        Screen: Illegal message
    What happened?
        The current screen processing action was terminated since a situation
        occurred where the application could not continue.
        This is probably due to an error in the ABAP program or in the current
        screen.
    What can you do?
        Note which actions and input led to the error.
        For further help in handling the problem, contact your SAP administrator.
        You can use the ABAP dump analysis transaction ST22 to view and manage
        termination messages, in particular for long term reference.
    Error analysis
        The program attempted to issue a " " message during "Exit Command" processing.
        This is an illegal operation.
        The program was terminated.
        Screen name.............. "SAPMV45A"
        Screen number............ 4001
    How to correct the error
        The program must be modified to correct the error.
        The modification must be made in "Exit Command" processing.
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
    Source Code Extract
    Line  SourceCde
        1 *---------------------------------------------------------------------*
        2 *       FORM YVBEP_LESEN                                              *
        3 *---------------------------------------------------------------------*
        4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
        5 *---------------------------------------------------------------------*
        6 FORM YVBEP_LESEN USING US_POSNR
        7                        US_ETENR
        8               CHANGING CH_TABIX.
        9
       10   YVBEP = SPACE.
       11   YVBEP-MANDT = VBAK-MANDT.
       12   YVBEP-VBELN = VBAK-VBELN.
       13   YVBEP-POSNR = US_POSNR.
       14   YVBEP-ETENR = US_ETENR.
       15   READ TABLE YVBEP.
       16   IF SY-SUBRC > 0.
       17     MESSAGE E506 WITH US_POSNR US_ETENR.
       18   ENDIF.
    >>>>>   CH_TABIX = SY-TABIX.
       20
       21 ENDFORM.
    Could you please help on this issue.
    Thanks
    Srinu

    Hi Srinu,
    it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
    It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
    If only a single order causes this issue, maybe something was wrong during an update.
    If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
    If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
    Regards,
    Klaus

  • Credit check at sales order level?

    Dear experts
    I want to set credit check at sale order level with following conditions
    consider open deliveries for credit exposure
    consider billing documents for creadit exposure
    do not consider any open orders
    Also if oldest items are open for more than 7days then block the sale order creation
    e.g suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-. In this case system should block the new sale order created of value more than Rs.50000/-
    plz suggest the configuration steps
    regards
    kailash

    dear friend
    For i am already having the same setting but still my scenario is not working. i will explain my scenario again
    suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-.
    In this case system should block the new sale order created of value more than Rs.50000/-
    But with the said settings purpose is not getting solved.
    my settings are;
    In OVA8 ;
    Update: 000015
    Static check: TICK
    Status: TICK
    open deliveries: TICK
    Plz suggest
    kailash

  • SD Stock checkint at Sale order level

    Dear Gurus
    I would like to know that, instead of delivery stage i would like to give control at the time of material entry in sale order level. Whenever user enters a material code system should not allow unless stock is there.
    regards
    Prasad

    Hi there,
    Are you asking that in order entry if a material is not available, then the system should not allow to even enter the material?
    May I know the reason for that?
    Through customizing it is possible. But consider this scenario which you will surely come across in that case. Consider that you will code in such a way that material will have a block if stock is not available. Consider that on 13th Oct you will carry out stock inventory in your plant & find that 100 quantity is available. So you will remove the material block & allow order entry for that material. Consider that you have an order with quantity 150 logged in.  Since there is no block on the material, user will be allowed to enter the material.  Customer requires 150 but you have just 100. That means there is no sufficient stock available to fulfill your order. This will contradict your requirement. Right?
    Unless the material is entered, system will not be able to carry availability check. Coz only then you will come to know what quantity the customer requires. Only then you will be able to confirm when the item will be available.
    So what I feel is that your requirement may be feasible through customized user exists but it will surely have issues like above.
    Regards,
    Sivanand

  • Cash discount calculation at invoice level not at sales order level

    Dear Friends
    while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
    can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
    where these setting incurred in this process. i have verifies all the routies, there is no such kind of logic to calculate in a particular palce.
    treat this one as high priority and let me know.
    Thanks
    Raju.

    Hi
    while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
    can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
    Please check your Pricing Procedure, whetehr against your Cash Discount Condition Type, Requirement 24 or 23 is maintained? If it is maintained remove these requirements and save. Then try to run the transaction.
    Regards,
    Amitesh Anand

  • How configure the credit limit at sales order level

    Hi
    how can i configure the credit limit at sales order level..
    ex: when i create sales order ... if exceeds the sales order value to  credit limit value ...sysyem does not accept to save this sales order ...is it possible...pls help me in this issue
    regards
    sesidhar

    Hiiiii
    It is very much possible in SAP
    first you have to create credit control area
    then assign your company code to your credit control area
    then create your customer and assign credit control area in billing tab (for that u have to activate credit control area for your transaction by OB20)
    Then go to t-code VOA8
    assing credit check to your sales document type
    create credit control area automatic with your credit control area.
    Regards
    Shambhu Sarkar

  • At sales order level

    Hi,
    In sales order level i am opening MWST condition i am getting "CondRoundDiff ".  0,01-, where it is getting this value and how to remove this one , and what is the solution for this please help me any one..
    Thanks,
    KK
    Edited by: Anand2mnp on Apr 26, 2011 6:57 PM

    This is likely due to the MWST being a group condition - meaning that SD recalculates the condition on the basis of the sum of the items in the group. This is quite normal for tax conditions -as customers expect tax to be calculated in the total.
    You can remove the group setting - however, you may get customer complaints when the tax amounts on the item add up to more than the tax calculated on the total.

  • Not able to put reason for rejection at sales order level.

    Hi Gurus,
    I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
    Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out. 
    Please guide me what can be the solution.
    Regards
    Vinod

    As far a I understand you created PO for line item
    So first check whether GR is reversed or not for PO
    Then mark this line item for deletion in PO and then in PR
    Check if you have created any billing document for PO if so reversed that invoice
    Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
    If you have Sales order related Billing, and if you have done billing reverse the same
    If you have Delivery related Billing, and if you have done billing reverse the same
    After reversing all docuemnts created for Sales order then only try to reject the line item
    You can check table VBFA for document flow

  • Free Good Qty as non modifiable field in the Sales Order Level

    Dear Friends,
    I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
    How can i do this.. Please advice.
    Thank U,
    Uwanthi

    Hi
    This is a standard behaviour in the system
    kindly use the below program and user exitexit
    MV45AFZZ and use "Userexit_filed_modification"
    Regfards
    Damu

  • How to restrict header text changes in sales order level

    Dear Experts,
    how to restrict header text changes in sales order level change mode
    thanks

    Hello Chandu,
    how to restrict header text changes in sales order level change mode
    In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
    Please try out this approach and let us know your latest observation on this issue.
    Regards,
    Sarthak

Maybe you are looking for