Sales Order line item pricing date

Hi,
When adding a new line item to an existing Sales Order, do NOT allow the pricing date to be > 6 months old. There are open sales orders that can be a year old. They have line items added to them as part of the entire order. The header VBKD-PRSDT is copied in to the new line items. This affects the pricing. The users want the pricing to be current (within the past 6 months).
It is difficult to change the new line item vbkd-prsdt without affecting the header vbkd-prsdt.
Any suggestions?
thanks,
Barb Czerniak

Hello Shiva,
The line item I am looking at has the item category of Z0N1 (used for Stock item), but when I go into copy control using tcode (VTFA) under item level, I don't see this item category as one of the options for selection. Is that normal?
Thanks,
Brijesh

Similar Messages

Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

Hello Experts
I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
use GR Doc date as billing date
3rd party sales process (w/o ship notif) - Billing

Hi Lakshmipathi ji,
As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
For Ex
Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
Regards
Hiba

Cannot reject/delete sales order line item due to del.date in 2210

Hi all,
not sure if anyone else had this issue already....
Situation :
Sales order line item entered with delivery date in 2210. We would like to correct this order but can't....
every time SAP issues error :
Error determining posting period (info
S008, variant GL, RC 3)
I believe this is because we haven't maintained our calendars yet for 2210 :-D
Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
Thanks for your help!

If the system pop ups the error message M2012, then please refer note 10891 or 37532. If the error message number is different, please update the forum.
thanks
G. Lakshmipathi

Field added in Aditional data tab of sales order line item at screen 8459

Hi all,
My problem is .
I have appended one field in VBAP table, given it a name "WBS ELEMENT"
The field is getting displayed in VA23 as well as VA02 Transaction.
when i create sales order with the quotation reference,
the "WBS Element" of line item of quotation should get updated in "WBS Eleement " of sales order line item
This i am doing by triggering user exit.
Problem is:
Once Quotation line item get copied to the sales order line item
and the screen is in front of you with those details,
before saving sales order .
if you go at the sales order line item withou saving the document
The field i have created in the screen 8459 i.e WBS Element ,doesnt get displayed.
how could i retain the field Ihave created on screen 8459
while creating the sales order from quotation before saving that sales order.
Pleas help .

Hi Vikram,
It seems as it has been coded only to save the values into the new field that you have appended to VBAP. But before saving if the user wants to see the field, it is blank. You can try coding in PBO (process before output) of the relevant screen as follows:
1. Get the reference of the quotation. Something like XVBAP-VGBEL will give this number.
2. Get the value of Z field in VBAP by passing this quotation.
3. Copy the above value to the corresponding Z field in XVBAP (or any internal table which holds VBAP data before saving)
Please reward if helpful.
Regards,
Krishna

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

Sales Order Line item category not getting Re detemining Correctly

Dear all,
            I need help regarding the Sales order item category redetermination.
            we are having two item categories YNAE and YNAG and it contains schedule line categories CP and CB ( i.e for item         category YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
   I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only. Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB). In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly. Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP. The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards. The call is recursive if you re-assign another ATP-relevant category.

How to upload sales order line items?

SAPGurus,
For years my customer service department has been asking for a way to upload sales order line items into the VA01 sales order-entry screen.
Many of our customers submit PO's with huge amount of line items, up to 1,000 lines. Our CS reps need to key in the data line by line (or copy/paste
approx 17 lines at once from Excel into the VA01 screen), and we are looking for a way to make this process leaner. One idea we have is that user creates the order header, and then has a way to upload the material numbers and quantities in a separate (newly created Z-transaction) screen in one go.
Obviously rules then need to be built that deal with the various pop-up messages related to e.g. ATP, material status, etc.
Does anyone have any experience or thoughts on how we could achieve this? A way to make the sales order-entry process a bit less time-consuming? Any feedback would be greatly appreciated !
Thank you,
RVS

Take the inputs from this Blog created by SUNIL PILLAI
Sales Documents upload using Standard Direct Input Program in LSMW
G. Lakshmipathi

I need to add fields in additional fields B the sales order line item

i need to add fields in additional fields B beside the field (icon_val_quantity_ structure) in the sales order line item, How to achicve this? please help me..

Please fined the below solution for achieving your requirement.
1. Add new filed "B" in table VBAP.
a) T.code SE11 --> Enter structure name VBAP --> display
b) Goto --> Append Structure --> Enter Structure name and new field "B"
2. request your basis team and take the access key for modification of stabdard program SAPMV45A & Screen: 8459
   a) After receiving access key for standard program then got o SE51 --> enter program name SAPMV45A & Screen: 8459
   b) click change Button
   c) click layout button
   d) add new field "B" below of the screen (F6 -> enter table name : VBAP --> get from dictionary --> selet new field and past in screen )
3) write below code in flow logic
PROCESS BEFORE OUTPUT.
                           Verarbeitung vor der Ausgabe
MODULE ZZPB_INITIALIZE_8459.
MODULE ZZPB_OUTPUT_8459.
PROCESS AFTER INPUT.
CHAIN.
    FIELD VBAP-New field name "B".
    FIELD ZVC_SALES_EXPORT-ZZAPLHENKO.
ENDCHAIN.
MODULE ZZPA_OUTPUT_8459.
4. functin Module code
module ZZPB_OUTPUT_8459 output.
Data: l_v_actve type ale_active,
        l_v_ttyp type c.
Data: l_v_tragr type tragr.
l_v_ttyp = t180-trtyp.
if l_v_actve is initial.
    l_v_ttyp = 'A'.
endif.
LOOP AT SCREEN.
    CASE l_v_ttyp.
      WHEN 'A' OR 'C'.
        SCREEN-INPUT = 0.
    ENDCASE.
ENDLOOP.

Create purchase order with reference to Sales order Line item

Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi Nemani

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

Not able to re-atp 1of the sales order line item

Hi SAP PP Gurus,
When I tried to re-atp 1 of the sales order line item it is giving error as mentioned below. Please let me know where this fix qty indicator in the sales order and how can I de-activate the same. Thanks in advance....
Item has no open quantity - Check fixed quantity ID
     Message no. V1 601
Diagnosis
     The item does not have any open, confirmed quantities and the "fix
     quantity" indicator is activated. This means that the customer has
     agreed on a zero quantity and nothing is delivered.
System Response
     The system issues a corresponding message.
Procedure
     If you want the item to receive a confirmed quantity after all which can
     be delivered later, you should de-activate the fix quantity indicator.

Hi Ritish,
Strategy is MTO..
I have triied to perform atp by using fix qty/date but still system in not proposing MAD. And it is giving below error screen.
No. of components checked:                1
Missing parts:                            1
Overall confirmation date could not be determined
Order : 1104739992
Material           Plnt SLoc Reqmts q     Requirements ATP/avai     Committ. d Material description M Bl
NH524AA@@          32F2 F2WH   1.000      03.08.2009      0.000      99.99.9999 HP gt7725 PCI Expres X
Thanks and Regards,
SHARAN.

Copying text from CMIR (KNMT) to the Sales Order Line Item

We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function. If doesn't exist, then look up by Sold to Partner Function. Have setup a new text id (ZPRN), a new access seq (9011). The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine. When I set the Partner Function to be SH. I get the following error msg:
"The Language does not come from the partner function AG for MVKE".
Any ideas? This access seq does not reference MVKE. It only references KNMT.
Thanks!

Hi Lisa,
Just stumbled on this post, as I am searching for something similar.
What you are attempting to do isn't possible in config.
This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
They work for sold-to only.
Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
I am currently looking myself for a solution for this problem and I will let you know what I find.
Cheers
Chris

Production Order quantity should be same as Sale order line item qnty

Dear experts
we have one user requirement as such
Production Order line item quantity should be same as Sale order line item qnty.
suppose for SO Line item he is ordered 100mts,Production of this paricular Line item should also be 100mts it should not be more than this,How to satisfy his requirement.
Regards
Sandeep patil

Hi,
If the Manual intervention is eliminated for processing of the data then the SO Line Item Qty will be equal to Production order Qty.
Background Jobs for MRP Run, Planned Order to production order cretaion will help you to manage this, along with effective Authorization Management.
Regards,
Siva

Add field to Sales Order line item

I need to add a field to Sales Order line item, can you tell me a user exit??

Hi,
You can a new field in the additional data B tab of the sales order line item..
Check the program SAPMV45A and screen number 8459
Thanks,
Naren

Material Variant configuration in sales order line item from Ztable

Hello Experts,
we have configurable material and and creating sales order. from sales order line item if we goto configuration we can maintain variant configurations. My requirement is that when i click on configuration after selecting a line item i need to check ztable where i have material no and and relable text. if an entry exists i have to populate this relable text in one of the configuration filed. Can any one help how can i read and update configuration in sales order level and where to do this coding so that when i click on configuration the value from ztable populated in a field.
Many thanks in advance.

Hi Senthil,
It is simple.
When you create a characteristic which should have the value maintained in the Z table, go to the tab values. Here you have a push button called "Other Value check". Here you click this button and select the function module option. Now, in the window, you will have a place where you can mention the name of teh function module.
You create a function module with the help of your developer to find out the text maintained in the Z table using teh rules you have in your mind and update that logic in the characteristic. In the earlier screen, you just have to mention the name of the function module, thats all, your work is done.
Now when you configure, for this characteristic, the value will be automatically determined using teh function module. You have to create such characteristics as "Not ready for input" ones in additional data for which you cannot enter values manually.
Hope this helps.

Getting Message no. TD600 while reading sales order line item text

Dear Experts,
I want to read text from sales order line item through ABAP, but unable to fetch the text data in the program & getting the below message: Text 0020001169 ID Z003 language EN not found.
But in the same program I can fetch Header text data, that means the text read program is correct. If anybody faced the same issue & already solved the same then please let me know the solution so that I can get out of that problem.
Thanks in Advance,
Vishal.

As per the message no. you have posted. it is clear that respective text record doesnt exist in the database.
Maintain Text record in Tcode:SO10
Text Name: 0020001169
Text ID: Z003
language EN
Now try & revert.

Sales Order line item pricing date

Similar Messages

Maybe you are looking for