Sales Order no in CO24 missing parts list

Missing parts CO24.
I am having trouble bringing the Sales Order field populated into the missing parts information system.
It seems that when RESB is populated with the sales order it brought through to the report but I have some Assembly Orders (82) that have a Sales Order but this is blank in the missing parts and therefore blank in RESB u2013 why would this be blank in RESB?
This is extremely frustrating as the users are asking me why have a Sales Order field that will not populate?
Could someone explain the logic of what conditions there are for the Sales Order number to appear in CO24 ?

Hi,
In case of make-to-order scenario, the components are not managed on the sales order special stock, since the field special stock for the components is empty.
Therefore, the sales order number is not copied to the reservation and it is not available on CO24.
If you would like to have this field displayed in CO24, you should manage the components on the individual sales order stock, instead of using collective requirements.
I hope this helps.
Regards,
Marcelo

Similar Messages

Co24 missing parts list does not show material with shortage

Dear All,
I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
In Co24 tcode system does not show any missing parts for the same production order.
For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
Is there any interconnection with expection messages to bring process forward?
Thanks for your help!
Regards, Andrey

It seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected.

CO24 missing parts list

Hi All,
Till last week the missing parts list for a particular MRP controller showed many parts but since this week it only shows some parts and we are not able to find out the difference between what is expected and what it is showing.
Can somebdy guide me through the exact process how it searches for missing parts through Availability check.
Thanks
Shailesh.

Dear Shailesh
Last week there might be No stock for componets, so system might have shown many componets list
but this week, enough stock might be availble for componets, so system is not showing missing parts
just check in MMBE for required components stock
Regards
kumar
Edited by: kumar kumar on Sep 9, 2009 12:26 PM

Scope of Check Variation in Missing Part list Production Order

Hi,
I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
Why this difference is coming,can any body tell the possible causes.
Cheers,
Kumar.S

>
KUMAR.S. wrote:
> Hi,
>
> I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
>
> Why this difference is coming,can any body tell the possible causes.
>
> Cheers,
> Kumar.S
Kumar,
Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction, check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
Regards,
Prasobh

Missing part list in plant maintenance ( CO 24)

Hi SAP experts,
Is it possible to use the transaction CO24 ( missing part list) for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
Regards

Hi,
I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
Hope thsi will help you.
regards
radhak mk

CO24 missing parts info

Hi Gurus,
Is component ATP info in CO02 consisitent with missing parts info in CO24?
An order in status created but not released is ATP OK using CO02, but is reported as Parts Missing in CO24, what is the reason behind?
Thanks,
Dawson

Hi,
Check rule used for Availablity check in Order is diffrent from Missing Part List .
Missing Part List will use check rule from Plant Parameter (OPPQ) perhaps Order will use Check control (OPJK)
Use same Check rule for both of them.
Regards,
Velmurugan S

Missing Part list for Plant to Plant Purchase order

Hi,
      I need the following requirement in CO24,
      In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.G

Hi Purushothaman,
If you have the following settings in OPJK:
Plant                 XXXX
Order Type       XXXX
Availability Check    2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule        PP PP checking rule
Component Check Type    ATP check
Release material     2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel

Missing Parts List While creating Prd. Order

Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hari

Hi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar

Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

Hi Team,
We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
Production Order quantity: 100 kg
Componenet A required quantity: 100 kg
MMBE Unrestricted qty: 1000 kg
MMBE Reserved Quantity: 2000 kg
So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.

Hello
The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
Problem with missing parts list during production order creation
issue in committing material for production order
Material Availibility check in Production orders
availability check
order is not released
As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
BR
Caetano

Production Order missing Part list error date 1,857 is not convertable

*Dear Experts*
When i m trying to check missing part list at production Order then system is showing the error
The date 1,857 is not convertible (please correct) in Production order Missing part list.
Rgds
Pankaj Agarwal

Dear ,
System is throwing you this message beacue your FC calander is vaild till 2010 and asking you to put the date btn FC valid from 2004 and FC valid to 2010.
Goto -OP03-Select the Factory Calnder Tab in change mode (pencil mode ) -Select the applicable calender chek box-Double click this -Extende the validit date till 2020 or beyond so that u will not face not only in this particular issue but in many other txn later on .
Agian -come back to OP03 main screen -Slect the Holiday calaner -Extende the same way and reassing in Factory calander
after this , do not forget to re-ssign this FC in respective plant in OP03-Plant assingment .
Try and revert back
Regards
JH
Edited by: Jiaul Haque on May 27, 2010 3:14 PM

"missing part list" releasing process order, but the material there is

Hi dears,
Ive a strange problem.
When im going to release a process order, the system give me a missing part list.
The strange is the material indicated in that list, a component of a phantom, is present in state free in the st. location indicate.
Does anybody know what can be the problem?
Thanks in advance,
Juan

Hi all,
the problem was that the material was present in quantity lower than safety stock.
For this reason, the system give me that advice.
however thanks for the help.
Best regards,
Juan

How to reconstruct the missing parts list (co24)

Dear All
How to reconstruct the missing parts list (co24).by using report PPCOXPR1.?
Rgds
Pankaj Agarwal

Hi Pankaj,
You need to run the program "PPCOXPR1" using SE38. This program will create missing part index in RESB table.
Hope this helps you, Reward your points.
Regards,
Prasobh

Why the missing parts list changed after Pro.order released

I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
Thanks,
Helai

Hi Lai,
You can do Material Availability check at the two stage of Production / Process Orders.
- First is to control (Check Missing Part) at the time of Order Creation.
T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
- Second is to control(Check Missing Part) at the of Order Relase.
T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
Regards,
Dhaval

Missing parts list at planned order level

I have tried to use comac t-code for checking the missing parts list at planned order level. but no log has been generated. pls advise. Is there any way to do the same?

Hi,
Use MDVP, i think it should meet your need.
If helpful award points
Regards,
Vivek

IDOC for missing parts list

Hi,
We would like to send the missing parts list generated from CO24 to other system. Is there any standard IDOC available to send missing parts?
I would appreciate your help.
Thanks.

Karthik,
Thanks for your quick reply. But this is not what I am looking out for. I am sorry, I think my question was not clear.
There is one functionality in Production Planning area that we can find out the missing parts for the production order. We have to send the information to our warehouse asking for the missing parts to fulfill the production order. Our warehouse is not on SAP so we want to send the information through an ALE/IDOC. In order to do this I wanted to know that is there any standard IDOC type which can be used or we have to create a custom IDOC.
Thanks.

Sales Order no in CO24 missing parts list

Similar Messages

Maybe you are looking for