Sales order not recongnizing customer reco account

Hi Gurus,
User created Customer without reconciliation account somehow. On that account user created Sales order and in the incomplete log there is error that no GL account is mentioned for that customer.
We have not changed customer master and updated with reconciliation account. Even though there is reconciliation account in customer master, in sales order its still coming up with the error that no GL account is determined for the customer.
How do we update the sales order with customer GL account? We can not change sold-to-party in the sales order so don't know how system will update information in the background.
Many thanks

Hi,
The question is contradictory. Initially you mentioned that customer account doesn't have reconciliation account. Sales order is created and is in the log with error. Later you said the customer account is updated? can you please post it again?
Thanks
Giridhar

Similar Messages

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

Invoice request based on multiple sales order for same customer

Hi Team,
I just wanted to know if we can create manual invoice request based on multiple sales order for same customer?
For project based invoice request i have create based on single invoice request.
Appreciate your input here.
Thanks,
Nitin

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Duplication of Purchase Order while creating sales orders for a customer

when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
for example..when we create sales order 1 the purchase order picked is PO1 and
for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
No idocs are being generated in this, even to check them..
How shall i resolve this...? Please help me out ASAP

Hi Kumar,
Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

Sales order posing without Customer

Hi All,
Sales oder data is sent by the third party system to production without customer ( sold-to-Party / Ship-to-Party ) data, it still creates the sales order in Production environment. The Basic type is ORDERS05 and the message type is ORDERS and the idoc is successfully posted in SAP with status 53.
But when the same data is sent to Quality, it does not allow to create the sales order with out Customer information. The idoc is created but with the status 51 ( Document not posted ) .Please let me know what would be the reason for this.
Please let me also know if i need to check the cofiguration settings in Quality.
Thanks and Regards,
Sireesha.

Hi,
Do you have any customer to your productive sales order or is saved without ?
If you do have please check also IMG configuration in
SPRO>Sales and Distribution>Electronic Data Interchange>EDI Messages>Configure EDI Partners into your receiving system
BR
Aris

Change in item category and settlement of old sales order not possible

Hi
I have to settle sales orders in VA88 and transfer data to COPA. I want to do directly without result analysis. So, in the item category, I removed the result analysis key. And the settlement goes thru.
My issue is that there are orders in July 2010 which have to be settled, but it does not work since the changes in item category has happened this month in Aug 2010 and the July sales order are also invoiced.
Pl suggest a solution to settle the July sales order to COPA.
Thanks
kamala

Hi Kamala
I see only one possibility... The old sales order consists of some GL accounts posted in it which is not mapped in the allocation structure...
Alloc Str has 2 parts - i.e. One, it consists of a group of cost elements it has to handle and Two, it consists of the valid settlement receivers like PSG, CTR, etc
You say, this alloc str works well with new sales orders.... The 2nd part of alloc structure (i.e. valid receivers) applies equally to all sales orders.. But what can really differentiate the 2 sales orders is the cost elements posted on it...
I dont foresee any other posslbe reason
Regards
Ajay M

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Transaction VKM1 - Changes Sales Order Line Items Custom Fileds

Hi,
I have a challenge to indentify the impact of VKM1 on a Sales Order Line Item Customer Enhanced Fields. When credit hold for the customer is released in VKM1, I want to prevent some of the changes to the line items in the User Exit. The Problems I am not sure, How VKM1 is calling the Transaction VA02 or those Sales Order User Exits to modify certain customer enhanced fields. I tried Activation of Break Point in Update Task but did not stop at the Break points set up in the User Exit. How does Transaction VKM1 call the Sales Orders to execute changes? Is it through BAPI or Call Transaction VA02 or some thing else.
Can any One please help me? Appreciate Your Help in advance.
Thanks,
Kannan

VKM1 uses FM SD_ORDER_CREDIT_RELEASE to release orders on credit.

Sales order and linked with BSX account key?

Respected Members,
I am creationg a purchase order with account assignment category M.
Suppose i have given material ABC and in material master of ABC i have maintain the valuation class 3000.
Now in details of account assignment category i have given the account modification VKA and consumption V and special stock E.
This VKA i have embedded in the GBB in the tcode OBYC and with the valuation class 3000 i have given the GL account
400210 ie consumption account.
Now this account is visible in purchase order as soon as i give the account assignment category and material.
Now secondly when i am giving sales order no in then it is replacing the consumption gl account with inventory gl account.
This inventory gl account is mentioned in the account key
BSX with the same valuation class 3000.
Now the doubt is that how from the sales order it is reaching to account key BSX .kindly explain me this background flow and settings.
I have also brief knowledge about the Requirement type and the requirement class.
Thanks a lot please give me the solution as soon as possible.
Thanks a lot.

Hi,
Here is the explanation.
Account determination of valuated sales order stock and project stock
Note that for valuated sales order stock and project stock (special
stock E and Q) and for the transaction/event keys BSX and GBB, you
must maintain an account determination to avoid receiving warning
messages when entering data (purchase order or transfer posting) for
valuated stock.
During data entry, the system attempts to execute a provisional
account determination for GBB for valuated stock. The system will
only replace the provisional account determination for GBB with the
correct account determination for the stock account (BSX), in the
background, if you enter the data for valuated stock at a later
point in time.
Hence if there is an entry in BSX then system replaces the GBB with BSX.
Thanks
Krishna.

Specific sales order not showing in VKM1

I have this sales order that is not showing in VKM1 even the credit status in not approved just wondering because there is other sales order with the sames credit account and credit status which show in VKM1. So there are two sales order with credit status not approved with the same credit account and same credit control area but only 1 of the 2 sales orders shows in VKM1. What are the cause of this scenario?
I check the 2 sales order in VKM4 the only difference is field OlIt (Status of credit check against oldest open items) the sales order that shows in VKM1 got status approved while the sales order that doesnt shows in VKM1 got status not approved. Is this a possible cause? Please help where I can find this status in the sales order header

In VBUK you can check Header - Over all credit status
In VBUP you can check the same at item level.
VKM1 will show documents with over all credit stats = B Credit check not OK.
The document which is not shwoing in VKM1, CHECK IN table VBUK for the over all credit status.
Regards
Sai

VERSION FIELD FROM SALES ORDER NOT APPEARING IN COOIS REPORT

DEAR ALL,
I am working on make to order scenario. Version field from sales order not updated when im taking MRP Run for specific Sales order in COOIS Report. But when iam creating production order with T. COde CO08 field getting updated. Its very important to get vrsion field as we have maintain old sales order No. in same. How this problem will get resolved?
Regards
Atul

Atul,
"MRP run" does not normally create production orders, MRP creates Planned orders. Planned orders do not contain Sales order version. I have never used this field before, but I would not be surprised if the behavior you are describing is 'standard'. When you create a production order using CO08, you are creating a 'production order with reference to a Sales order' (which contains Sales Version). When you create a production order using, say, CO40 or CO41, or using a program such as PPBICO40 in Batch, you are creating a 'production order with reference to a Planned order', (which does not contain version).
If it is imperative that you have the Sales Order version number in all production orders, you could see if Planning Strategy 82 (Assemble to order) production orders contain the data you seek. Otherwise, I am afraid you will have to have your ABAPers write some custom code to update this field in the production order.
Another way to get sales order data into the production order, that does NOT require custom code, is by using Item Texts in the Sales order. Any text placed in the Sales Order Item Text Field Production Memo (Text ID 0006) can be configured to be duplicated automatically in the Production order in an MTO environment. Production Memo then displays as another Tab in CO02.
Regards,
DB49

Sales Order not Valid During Vendor Clearing

Hi,
When I'm clearing vendor open items (both normal & special GL transactions) i'm getting an error message "Sales Order not Valid". How do I correct this error?
Thanks,
Chaikaru

Hi ,
As you're saying that the order got saved already with confirmation, you can try re-doing the ATP check on the SO item. If the order item is not present in SCM, system will throw an error with the message "APO: Order Doesn't exist".
You have mentioned that CCR did not detect the inconsistency, have you by any chance selected check box "use VBBE table"?
You can try resending all the Sales Orders to SCM by running Initial Supply (report RIMODINI) for Sales Order Integration Model., monitor the queues in /SAPAPO/CQ. Alternatively, If you're using Inbound queues in SCM, you can only check SMQ2 in SCM and if you're using Outbound queues in ECC, check SMQ1 in ECC to monitor the queus.
regards,
Mohan

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

What setting to mandate that invoice is created based on sales order NOT...

Hi,everyone
Could you tell me the detailed configuration to mandate that invoice is created based on sales order NOT delivery documents.
Additionaly, I need to define this rule at headquarter and apply it all lower-level companies. how to do it.
thanks you very much

Dear Humility,
Could you tell me the detailed configuration to mandate that invoice is created based on sales order NOT delivery documents.
This is quite possible through copy control settings between sales order and billing document
In standard billing type F1 will billed with reference to the sales order OR,so you can copy those settings then rename to your document types and itemcategory.
Go to VTFA transaction click n change icon then select billing type F1 and order type OR then click on Copy As icon (F6)and change the document types(maintain your docuemnt types).
To copy item level settings
Now you come back to initial screen agin you select billing type F1 and order type OR then click on item here you select standard item category then click on Copy as Icon (F6) here you maintain your itemcategory.
Note:- Don't change the satndard settings you just copy
Additionaly, I need to define this rule at headquarter and apply it all lower-level companies. how to do it.
For this you can take help of your BASIS people they will full fill with the roles and authorisation settings.
I hope this will help you,
Regards,
Murali.

Sales order block in customer master

Hi Gurus,
There is one requiremnet from client.
_Create one additional Sales Order Block which is maintained in the customer master and prevents order creation for these customers._
Can any one tell me where is sales order block in customer master.
Regards,
Ajoy

Hi,
You can block the customer centrally or for the required sales areas using XD05. this is one option.
As i understand additional block at sales order for this customer means you can set the customer credit limit as say 1 $ assuming any of the material that is sold is above that, the system does the credit check and blocks the order. How do you want to deal with this block you can think in terms of credit management settings. This is config.
But if you want to set a block at the sales order dynamically for the required some customers, then you need to implement an user exit like, Userexit_save_document. the authorised users can go in VA02 and remove the block. But to identify in the user exit logic which customer you want to block you need to maintain some master at customer master level.
Anyways let me know if this idea helps you so that i can guide furhter.
regards
sadhu kishore

Sales order not recongnizing customer reco account

Similar Messages

Maybe you are looking for