Sales order number in process order

Hello gurus,
Is it not possible to have  a particular sales order consume a PIR  and have that sales order number reflected in the process order (The process ord which is converted from the plnd order which is a result of MRP run after sales order consumes PIR)...
Thanks and regards

Dear,
If your material has strategy type as MTS then its not possible to allocate the PIR to a particular Sales Order in the Process Order, Sales Order can be included in planning by combining strategies but having a link is quite difficult.
Thanks & Regards,
Vijaya Bhaskar A

Similar Messages

  • Query on open planned orders details with process order GR details

    Dear Experts,
    I need to create a query in SQ01 where the requirement is as given below,
    Query output should display the open planned orders  (Planned orders which is not converted to process order details) details for a material like Planned order number, Planned order quantity, Start date, Finish date and also  the details of the list of process orders created for the same material with its details like PO qty, GR qty, Basic start date, Finish date, Actual finish date, BOM Component material codes, component quantity.
    But i tried creating this query by joing the tables PLAF+ AFPO+AUFK+ AFKO+RESB . My input parameter will be the Material Number for which Planned order and Process orders are being created.
    But i am unable to generate the output when i create a query by joining these tables
    Is it possible to obtain the output for open planned order details and process order details in a single query ?
    I am failing in my repeated attempts
    Please provide your suggestions for developing this query
    Regards,
    J.Balakrishnan

    Dear Bala,
    as alternative , for use a query report and not a custom abap report, you can try to read data from MRP tables MDKP and MDTB . In these one tables you can find both elements (planned order and production orders) for to start to research all details that you need.
    You can also use MDTB-DELKZ to filter only planned order (PA) and Production order (FE).
    With the number order you can read the RESB table in order to define components details.
    With this table would you the advantage to have always the opened orders.
    If the following table are empty you should make a little customizing modification so that once MRP run will write them.
    Give me feedback if i have been useful for you.
    Daniele

  • Error:Assign handling Unit from one Process order to another process order

    Hi Experts,
    I am facing different issues in assigning handling unit from one process order to another.
    Business process:
    1. Two similar Process Orders are existing in the system
    2. Delivery is created for first process order using LP10 for one or more components
    3. TO is created in foreground using VL06P
    4. TO is confirmed by providing in stock available Handling Unit (HU) / storage Unit details Using LT12
    5. Customized transaction is used to reassign newly created HU (created in previous step) from first process order to second process order. As a result many steps are performed in background for delinking the HU from first process order to second process order (including creation of different TOs)
    I am facing different issues in the process:
    1. Sometimes while confirming the TO in step 4: error is received as "Reservation item 0065 with material 4013959300300 does not exist" OR "Reservation item with material does not exist"
    2. If the TO is confirmed in step 4. I am facing error in step 5 as "Warehouse number  does not exist (new selection required)"
    Both these errors are standard errors and I could not find much information on them in SCN also.
    If anyone can throw light on any of them then it would be great.
    Please let me know if any additional information is required.
    Thanks
    Harsh Aggarwal

    Hi Manish
    Thanks for your response. Actually, the customized program is used only in fifth step and not till TO confirmation so that error is not related to Customized program. However, in some cases I am able to do the confirmation but the error is received in 5th step i.e. Warehouse number  does not exist (new selection required)"
    Any further guidance you can provide. I will ask ABAP to check the customized program but the error seems to be a standard error.

  • Multi Plnd Order to Single Process Order

    We have implemented Process Industry in our organisation (PP-PI).
    Can we convert MULTIPLE planned order to SINGLE process order ? How?
    If 'No' then what is the reason behind it?
    Chintan Patel

    Thank you Mr. Shiva & Mr. Vittal for prompt reply.
    But going furhter in the scenario as under:
    1) FERT, Strategy: 20 Make-to-Order
        Ind/Collective: 2 Collective Only,
        MRP Type: M0,
        Lot Size: MB,
        Procurement: Inhouse Production
       FERT has BOM which include HALB, VERP
       HALB has BOM which include ROH & VERP
    2) Sales Order Entered
        Line: 10  FERT: 600000673    Qty: 2000
        Line: 20  FERT: 600000673    Qty:      3  (free qty)
    3) Run MPS by MD50 on Sales Order, Line Item 10
        Result: Planned Order for line item 10 is generated
    4) Run MRP by MD41 on FERT 600000673
        Result: Second Planned for line item 20 is also generated
    Requirement:
    Can we obtain only one planned order for both line items as FERT are same for both lines ?
    Chintan Patel, Gujarat

  • Planned order conversion to Process Order and Stock Transport Order

    Hello Friends,
    Help me to setup the below scenario
    We have an requirement wherein MAT1 can be inhouse produced or can also get stock from other plant via stock transport order.
    For which in Material master I have configured
    MRP 2 view
    Procuremrent Type - X
    Special Procurement - 40 (wherin the splly plant is maintained)
    MRP 3 view
    Strategy group - 40 (as it is planning with final assembly)
    But when i run MRP system created Planed orders for PIRs. Selecting Planned Order conversion only Purchase req tab is available we do not have an option to convert to production order.
    Kindly help me correcting the settings, so that i should be in a position to convert planned order either to process order or Stock transport Purchase requisition.
    Thanks and Regards,
    Chandra

    Hi Chandra,
    Stock transfer is only possible with procurement type 'F'. when you take spl.procurement type 40, its a combination of F(procurement type) and U (Spl.procurement). it will over write the procurement type ('X' in your case) in material master. that is the reason u r getting only pur req.
    if you know the proportion quantity i.e how much inhouse and how much stock transport, then use quota arrangement.
    or
    don't use any spl procurement key. define the materials in both the plants. when converting planned order to pur req. manually assign supplying plant and item category 'U'. try this.
    Thanks & regards
    Dilip

  • Internal Order Number For DBM order

    Hi All,
    How to get the internal order no for the SAP DBM order number,?
    from which table can we fetch ?
    Regards,
    Rangakarthick

    Hi,
    In DBM order an internal order can be created on header level and on split level.
    On split level internal order is created within event BILLING_CREATE.
    The internal order (like other documents related to the DBM order like e.g. reservation as well) are displayed in the order document flow.
    In table /DBM/ORD_DOCFLOW you can fetch internal order number from DBM order.
    But its a little bit tricky:
    In field INSTID_A you have to select business object BUS2400 representing the DBM order.
    Field INSTID_B is populated with business object BUS2075 and the internal order number.
    e.g. if you want to select all internal orders for DBM order 29926 you have to select in initial screen
    field INSTID_A:
    "BUS2400   0000029926*" (consider: there are 3 spaces after BUS2400)
    and field INSTID_B:
    "BUS2075*"
    Example from image: DBM order: 299826
    Internal order header: (no split) 121526
    Internal order split: 235320 (same for both splits 0001 and 0002)
    Regards
    Joachim

  • Sequence number in process order

    Hi,
    Kindly brief about usage of sequence number, which is in process order with example. Is this can be used for capacity leveling. If so how that can be done.
    If one sequence number is assigned to multiple process orders means double entries, then what is the impact during capacity leveling based sequence number.
    Is number range is maintained any where in SPRO for sequence number. If so where? Is there any possibility to maintain number range for sequence number if required?
    Thanks & Regards,
    N. Laxman

    1.Seq. number in an order
    Number that can be assigned to production orders or planned orders at the level of the task list header and is therefore valid for all the operations in an order.
    The sequence number is used to  sort the orders for the display on the planning table and to
    form a dispatching sequence using the sort key.
    3.

  • Changing material number when Process Order is released

    Hello,
    We have a scenario in which the material number of a process order may need to be changed after the process order is released.  We will have both in process and post production inspection types assigned to this order, and both inspection lots are created at process order release.  We also will have a batch number created at process order release. 
    When recording test results in the inspection lot before a process order has been confirmed, the users may identify that the material number should be different.  We would like a way to be able to either change the material number in the process order (and inspection lots).  We know this involves a lot of updates (master data changes to the existing process order and inspection lots).  Currently, there is no way to transfer information to a new material number without receiving product in and performing a usage decision in the post production inspection lot to transfer to a new material number. 
    The client has implemented all modules, except PP (which we are in the process of now).  We know that Variant Configuration would have been the right solution for this, but this is not an option since MM is already implemented. 
    If you have any suggestions, please reply. 
    Thanks in advance.

    Hi Prasobh,
    The exact scenario is as follows:
    1. A semi finished good will be used as a component to produce the finished good.
    2. This semi finished good will have treatments added to it, and quality inspection will be performed as treatments are added. 
    3. Inspections will occur several times as treatments are added.  If during one of these inspections, material is out of spec, and the blend should be transferred to another material number, we need to be able to change to another material number.  To have a customization where material number is changed in all of the relevant PP and QM tables seems risky. 
    This is why we can't really use material classification.  We also do not have the option to use VC bc the MM module is already implemented. 
    Thanks.

  • How to copy Customer Sales Order number to Purchase Order for 3rd party sal

    Hi experts,
    We are doing third party sales. So once we create Customer Sales Orders manually via VA01, users also manually create Purchase Req for it.
    We do not automatically create PR from Sales Order, as this is not my clients requirement. So we don't use item category group BANS in the material master.
    In the item level in the PR under the Contact Person tab, the creation indicator shows "V Sales & distribution document". Once PR is created this updates the PR number under the item level Schedule lines in the Sales Order.
    After PR creation, we run a job to create PO's.
    But the new requirement from the client is to automate this PO creation thru EDI.
    Our SAP is 4.6C & the Idoc type we use is ORDERS05 & Message Type is ORDERS. We are using EDIFACT std.
    Once I get the idoc xml file for this PO, I find that my Customer PO number (from the Sales Order) & also the Customer Sales Order number is not copying to the xml output.
    Please advise what needs to be done inorder to have it.
    This will be great help & I will reward for the answers !
    Rgds,
    Pri

    Tables are related.
    MATNR
    WERKS
    MBDAT
    LGORT
    CHARG
    etc fields are common in both VBBS and VBBE.
    May be you can generate a condition a fetch data using this.
    I hope it helps.
    thanks

  • How can get batch number in process order?(T-code: COR1, COR2)

    Please tell me step by step process it will be better to me the solve my issue.
    When End-user uses alread existed batch number,
    Pop-up Message,
    "Your batch number is already exist.
    Are you creating new batch number?"
    If the answer is "No",
    System still uses that batch number.
    And User-Exits, or bodies don't exist this time.
    How can I get this batch number When saving in process order?
    I uses User-Exits "SAPLV1ZE" in Batch Number Check,
    "PPCO0007" and "PPCO0001" in saving process order.
    I know "PPCO0001" has all information about process order,
    but I can't get batch number to "PPCO0007" From "PPCO0001" by using Memory ID.
    Cause PPCO0007 happens before PPCO0001.
    (ref. PPCO0007 can stop saving in process order.)
    I want to know how can I get batch number when pop-up message's answer is "No".
    I have to send this batch number  to PPCO0007 by using Memory ID.
    Please, help me.
    Edited by: Jamie White 99 on Mar 15, 2010 11:00 AM

    Dear,
    Could you please clear your requirement in brief?
    You don't want to use the existing batch number or want to assign external batch number or want unique batch number?
    Use SAPLV1ZE and EXIT_SAPLV01Z_003 where you can replace the proposed number range with external interval defined by yourself.Also using EXIT_SAPLV01Z_004 you can define your own checking rule.
    Further information can be obtained from the documentation on the enhancements
    Also refer this link,
    http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
    Re: External batch assignment( Manual)
    Regards,
    R.Brahmankar

  • Automatic Sales Order Number in Production Order

    Good Afternoon Experts,
    I am currently testing MRP Wizard and upon creating order recommendation, Sales Order Number field in the purchase order is blank.  Is there a way wherein system can automatically put the Sales Order Number where the said recommendation came from?  This will be of great help for users to know the origin of siad recommendation.
    Thanks and hope to hear from you soon.
    Sandra
    Edited by: Sandra Callanta on May 29, 2009 9:53 AM

    Remarks in Purchase Order will display sales order no. / activate Base Ref. field in purchase order.

  • Inspection Lot number on Process Order

    Hi Experts,
    There's an Inspection Lot field in process order in Assignment Tab, but it doesnt reflect the number of the Inspection Lot of the Material.  What am i missing?
    Thanks,
    Kumar

    hi kumar
    that inspection lot no is assigned to process order when you have maintained inspection type 03 ie inprocess check in material master . when you release process order you can see inspection lot is generated and that inpsection lot no you can on that field.
    Regards
    Pravin

  • Error in cancelling sales order line using process order API

    Hi,
    I have created a sales order which is in booked status. I want to cancel the order line . when I am running the concurrent request I am getting the following error message.I am using the process order API to perform this operation.
    API Error Message You are not allowed to update Inventory Item because:
    line has been booked
    API Error Message You are not allowed to update Line Type because:
    Line is Booked
    Can anyone help.
    thanks
    Ashwini

    Hi,
    What is the application release?
    What concurrent program you are running? Is it a custom or seeded one? And, what is the API name?
    Please see if these docs are applicable.
    Unable To Manual Mass Update Items For Multiple Booked Sales Order Lines [ID 887905.1]
    Cannot Update Ordered Item To Related Item On Booked Sales Order Line [ID 298796.1]
    Thanks,
    Hussein

  • Table to find the phase number in process order operation

    Hello All,
    Is there a way to find the table for phase details which are assigned to operation in a process order.
    Regards,
    Rohit

    Hi Rohit samant,
    Go to Process order Change or Display mode ie Tcode : COR2 or COR3.
    Enter the process order no , click on "Operation Overview (F6)", Click on the Phase field on any one operation, Click "F1", the Performance Assistance Screen will be displayed, Click Technical Details, you can get all details, like programe Name, Status, Table Name, Fieldname & all Technical details.
    I hope the above information is as per your request, Hence Reward Points,
    Regards,
    Nayeem Ahamed

  • Customer/Purchase Order number in PP Orders

    Hi everybody,
    I need your help... We are running a make to order scenario / process... there is a request to copy/transfer the customer order number (Purchase Order field on Sales Order creation view) to the production order automatically.... do you know if this can be done using configuration and/or user exit ?  We want to have this cross reference available when we run COOIS for example. Also if we run multiple production orders for the same sales order, sub-assemblies for example, we want also to have that Customer Order No (Purchase Order no.) on the produccion order reports... The goal is to have a quick list of all pp orders for a specfic Sales Order... Any input will be appreciated...
    Thanks,
    Alfonso Gilson

    dear friend,
    -i believe some relevant  user exits exist;
    -you could talk to your abaper, say, to append the AFKO table (to add a new field) and to write a custom code to populate this field as alternative solution ...
    good luck

Maybe you are looking for