Sales order number not appears  in account assignment tab

Hi,
User raised PO for third party and account assignment category.But ,Sales order number  and its item not appear in account assignment tab.
Can anybody help me.
Lucky.

Hi Lucky,
Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
Thanks for your inputs on this issue.
Regards
Rang

Similar Messages

  • Sales order Number not appearing in CO-PA report painter

    Hi
    I have prepared profitability report through report painter through t-codes KE34 and KE31-
    Characteristics I have chosen is Sales order No/Plant/sales organization/product and customer-
    In the report Sales order Number is not appearing?
    We are able to see plant number/sales organization no/product no and customer no-
    Where I have committed mistake
    Thanks in advance
    joseph david

    HI,
    In order for you to see Characteristics in KE34 form definition, they have to be defined as 'Segment level' in KEQ3, as also metioned by Christian. However, it is not advisable to define 'Sales order #' as a Segment level, considering that 'Sales order #', changes frequently and also owing to performance issues with huge number of Segment level records which gets created in the course of time.
    If you want to report based on Sales order, then please consider using line item form/report KE94/KE91 or check if KE24 is sufficient.
    Hope this helps.

  • Sales order number  not copied to documents in accounting

    Dear all,
    I have created normal sales order ,delivery and billing and creation of excise billing invoice which i do for the sales  which happens directly from factory.
    now go to VF02, and click on 'accounting overview '  click on accounting document .Here sales order number (COBL-KDAUF) is not copied. where as accounting document generated for excise invoice sales order number is appearing .
    The same is the case with  STO through SD route ....
    kindly suggest . 
    thanks,
    Shankar

    Dear Shankar
    As you would be aware, four Accounting Documents would be generated for one billing document viz
    -  Accounting Document for Customer Debit
    -  Profit Center
    -  Controlling Document
    -  Profitability Analysis
    Of the above four documents, in which you have seen.  You can see the order reference in Profitability Analysis. 
    thanks
    G. Lakshmipathi

  • Credit Card number entered CRM sales order is not appearing in R3 Sales ord

    Hi,
    We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
    Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
    Appreciate your help on this.
    Regards
    Mohammed Roshan

    Hi All,
    Looking forward to your valuable inputs on this as to  how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
    Regards
    Mohammed Roshan

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Rejected Quotation number is coming in account assignment tab in sales orde

    Hi Friends,
    I have created one quotation 'X 'and after that I created one more quotation'Y' with the reference of original quotation'X 'and rejected the earlier created quotation 'X'.
    After that I created sales order'Z' with the reference of quotation 'Y' but while i go to account assignment tab at ' order field' at sales order item level than the cancelled quotation no. is there coming.
    As per my knowledge quotation  no. 'Y' should flow in sales order account assignment tab in 'order field'
    My question is why rejected quotation no. is flowing there in account assignment tab in sales oreder ??
    And what is the use and impact of sales order field under account assignment tab at item level in sales order??
    This is scenario of MTO and we are using billing plan at sales document header level.
    Regards
    SV
    Edited by: sv.sap09 on Dec 6, 2010 1:22 PM
    Edited by: sv.sap09 on Dec 7, 2010 7:31 AM

    FYI-
    "Order field" at item level in sales order - account assignment tab refers Internal Order number ( created by using Tx:KO01), this is not SD orders.
              You might have same number range for Internal Orders & quotations. Hence confusing with the number.
    Quotation number will be available only in document flow & document status table VBUK. will not be displayed in order transaction.
    Regards,
    Reazuddin MD

  • Sales order number not showin in ATP sccreen

    Hello All
                        Can you please answer my quesiton regarding ATP, i created a sales order, system performed ATP check and saved.
    In MD04 screen, i see the sales order number as a demand, but when i navigate to ATP quantities screen from MD04, there i see Totals record demand demand for the sales order, but i can't see the sales order number even when i click on Details of total records, also i am not able to create a delivery for this sales order, can you please tell me how to fix this?
    Thanks
    manju

    Please see the date the Schedule line has been confirmed. Delivery can be created only the material availablility date seen in the shipping tab in Schedule line. or the transportation planning date seen in the shipping tab of schedule line.
    In case if you still have have issues, please reply.
    Regards,
    vasim.

  • Sales order number not displaying

    hi friends,
    the saled order number  which should have been displayed after saving the order on the bottom left corner of the page , when we press the save button is not getting displayed,
    can anyone help??
                        i can only see the sales order number in change mode.
    help
    sk

    Hi,
    Can check in the standard program with your ABAP consultnat
    Program    
    MV45AF0B_BELEG_SICHERN 
    Found locations/short description ( line 1261
    MESSAGE S311 WITH TVAKT-BEZEI VBAK-VBELN.  
    Program    
    MZFOEF01
    Found locations/short description  ( line 91)
    MESSAGE s311(v1) WITH cv_vbeln. 
    The message standard order is used in this areas, please check with ur ABAP consultant where it is missed.
    Kindly Reward points if usefull.
    Regards
    vK

  • Sales order number not exposed in Production Order DTW Template

    Dear all,
    Sales order number field(ie., OrginNum) is not exposed in dtw template of oProductionOrder,
    As we need to update sales order number manually linked with production order after uploading prodn .orders thru DTW.
    We are using DTW Version 2005.0.18 API Version 6.80.320
    Whether this issue is solved in latest 2005 B versions ?
    Jeyakanthan

    After analysis,We should enter sales order DocEntry on field ProductionOrderOriginEntry.

  • Sales order number not coming QA32 screen

    Hi Gurus,
    We have created a lay out in QA32 including sales order no,but the sales order no is not visible in the Change data for inspection lot (QA32 Screen)
    We are creating production order via sales order.Our client wants sales order number displayed in the screen.
    What must the reason for not picking the sales order number?
    Is there any other settings we are missing.
    Thanks in advance
    Regards
    Ramkumar

    Hi,
    First you tell me which Inspection type your using.
    Sales order number will Show in the lot if following requirement will exist.
    1. Make to Order Scenario with 04 - Inspection type (Goods Receipt from Production)
    2. Inspection at sales  Order level with 10,11 Inspection Type.
    Regards,
    S.Babusingh

  • In Milestone billing WBS elet field not visible in Account assignment tab

    Hi Gurus,
    Could you pls let me know how to make WBS element field to display in Account assignment tab (Item details of Sales order).
    During Milestone billing in Billing plan tab WBS element is getting displayed where in for Account assignment tab it is not.
    But for TAD (Service) and TAX(non stock) this WBS element field is viewable in Account assignment tab.
    Pls suggest me if any transaction variants are required for this or not? Or else pls provide solution to sort out this issue.
    Thanks in advance
    regards....Divakaran

    Hi Divakar,
    refer this thread
    wbs field in account assignment

  • Order field at item level Account Assignment tab in Inquiry

    Dear All,
    What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
    When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
    We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
    Is there a possibility, we can suppress the Order field.
    Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4 and in material master.
    Regards,
    Venkat

    item category  is determine from Item Catergory group in Mat master and Sales Doc Type.

  • Sales order number in Shopping cart related documents tab.

    We are using SRM7.0 with classic scenario. Client wants to see the Sales order number (Created in Backend) for the backend PO in shopping cart Related documents tab same as other history like Confirmation and Invoice.
    How to update the sales order number to shopping cart? is there any BADI ? Please help me..
    Thanks Lot
    Srini.

    Thanks for Reply
    I have already tried validation and sub situation but that is not working and second is it is related to FI GL line item so SD consultant cant help i  that.
    Regards
    Shayam

  • Sales document number not appearing in Work Item.

    Hello gurus,
         I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
         Please suggest a solution.
    Regards,
    Dnyanesh.

    Hello All,
         Thanks for your reply.
    I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
    But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
    Regards,
    Dnyanesh.

  • Sales Order Number not flow to Finantial Document

    Hi!!
    I need help with the interface between SD and FI.
    I´m doing the following process:
    I create a sales order (Tx:VA01) and then I Billing it and generate a SD Document and a FI Document.
    The problem it´s that in the FI Document, the Sales Order field it´s empty and the Position of the Sales Order is filled correctly.
    (No message appeared when I save these documents)
    Then when I want to run the F.50 for closing. The batch input show the following message:
    SD document  is not in the database or has been archived
    Message no. V1302
    Diagnosis
    This message is issued if no document header (VBAK) can be found
    (discrepancies in R/3) for a sales requirement single record.
    System Response
    In the initial sales order supply, the following error message appears
    'Document xxxxxx not available'  V1 302.
    Procedure
    If an error occurs in initial data supply in APO, discrepancies have
    occurred between the requirements and sales documents in R/3. This
    discrepance can be corrected in R/3 using report SDRQCR21.
    Can anybody help me with this??
    Thanks in advance
    Francisco

    Hi
    Kindly follow the below procedure .
    First i would suggest that you check the short dumps using ST22 tranaction.
    Second check if you notice any update terminates via transaction SM13.
    Check these threads
    UC_OBJECTS_NOT_CHARLIKE
    Runtime error UC_OBJECTS_NOT_CHARLIKE
    You can also check in table VBAK whether the quote references are exists.
    or
    This discrepance can be corrected in R/3 using report SDRQCR21.
    Regards
    Aravind

Maybe you are looking for