Sales order number not displaying

hi friends,
the saled order number which should have been displayed after saving the order on the bottom left corner of the page , when we press the save button is not getting displayed,
can anyone help??
i can only see the sales order number in change mode.
help
sk

Hi,
Can check in the standard program with your ABAP consultnat
Program
MV45AF0B_BELEG_SICHERN
Found locations/short description ( line 1261
MESSAGE S311 WITH TVAKT-BEZEI VBAK-VBELN.
Program
MZFOEF01
Found locations/short description ( line 91)
MESSAGE s311(v1) WITH cv_vbeln.
The message standard order is used in this areas, please check with ur ABAP consultant where it is missed.
Kindly Reward points if usefull.
Regards
vK

Similar Messages

Customer Sales Order number to display in Purchase Order idoc

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

Sales order number not coming QA32 screen

Hi Gurus,
We have created a lay out in QA32 including sales order no,but the sales order no is not visible in the Change data for inspection lot (QA32 Screen)
We are creating production order via sales order.Our client wants sales order number displayed in the screen.
What must the reason for not picking the sales order number?
Is there any other settings we are missing.
Thanks in advance
Regards
Ramkumar

Hi,
First you tell me which Inspection type your using.
Sales order number will Show in the lot if following requirement will exist.
1. Make to Order Scenario with 04 - Inspection type (Goods Receipt from Production)
2. Inspection at sales Order level with 10,11 Inspection Type.
Regards,
S.Babusingh

Sales order number not copied to documents in accounting

Dear all,
I have created normal sales order ,delivery and billing and creation of excise billing invoice which i do for the sales which happens directly from factory.
now go to VF02, and click on 'accounting overview ' click on accounting document .Here sales order number (COBL-KDAUF) is not copied. where as accounting document generated for excise invoice sales order number is appearing .
The same is the case with STO through SD route ....
kindly suggest .
thanks,
Shankar

Dear Shankar
As you would be aware, four Accounting Documents would be generated for one billing document viz
- Accounting Document for Customer Debit
- Profit Center
- Controlling Document
- Profitability Analysis
Of the above four documents, in which you have seen. You can see the order reference in Profitability Analysis.
thanks
G. Lakshmipathi

Sales order number not showin in ATP sccreen

Hello All
Can you please answer my quesiton regarding ATP, i created a sales order, system performed ATP check and saved.
In MD04 screen, i see the sales order number as a demand, but when i navigate to ATP quantities screen from MD04, there i see Totals record demand demand for the sales order, but i can't see the sales order number even when i click on Details of total records, also i am not able to create a delivery for this sales order, can you please tell me how to fix this?
Thanks
manju

Please see the date the Schedule line has been confirmed. Delivery can be created only the material availablility date seen in the shipping tab in Schedule line. or the transportation planning date seen in the shipping tab of schedule line.
In case if you still have have issues, please reply.
Regards,
vasim.

Sales order number not exposed in Production Order DTW Template

Dear all,
Sales order number field(ie., OrginNum) is not exposed in dtw template of oProductionOrder,
As we need to update sales order number manually linked with production order after uploading prodn .orders thru DTW.
We are using DTW Version 2005.0.18 API Version 6.80.320
Whether this issue is solved in latest 2005 B versions ?
Jeyakanthan

After analysis,We should enter sales order DocEntry on field ProductionOrderOriginEntry.

Sales order Number not appearing in CO-PA report painter

Hi
I have prepared profitability report through report painter through t-codes KE34 and KE31-
Characteristics I have chosen is Sales order No/Plant/sales organization/product and customer-
In the report Sales order Number is not appearing?
We are able to see plant number/sales organization no/product no and customer no-
Where I have committed mistake
Thanks in advance
joseph david

HI,
In order for you to see Characteristics in KE34 form definition, they have to be defined as 'Segment level' in KEQ3, as also metioned by Christian. However, it is not advisable to define 'Sales order #' as a Segment level, considering that 'Sales order #', changes frequently and also owing to performance issues with huge number of Segment level records which gets created in the course of time.
If you want to report based on Sales order, then please consider using line item form/report KE94/KE91 or check if KE24 is sufficient.
Hope this helps.

Sales order number not appears in account assignment tab

Hi,
User raised PO for third party and account assignment category.But ,Sales order number and its item not appear in account assignment tab.
Can anybody help me.
Lucky.

Hi Lucky,
Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
Thanks for your inputs on this issue.
Regards
Rang

Additinal tab B in sales Order header not displayed after EHP5 upgrade

Hello Everyone,
                          I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
      We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote 170183.
Now the question is how can I restore the existing functionality?
PROCESS BEFORE OUTPUT.
Verarbeitung vor der Ausgabe
Kopfdaten vorbereiten
MODULE VBAK_BEARBEITEN_VOR.
PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
PROCESS AFTER INPUT.
Verarbeitung nach der Eingabe
PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
CALL SUBSCREEN 8309.                                                             <----This statement fails
Alle Felder in der Bearbeiten-Kette
MODULE VBAK_BEARBEITEN.
Please advice.
Regards
Abhishek

Hi
Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
Regards
Eduardo

Sales Order Number not flow to Finantial Document

Hi!!
I need help with the interface between SD and FI.
I´m doing the following process:
I create a sales order (Tx:VA01) and then I Billing it and generate a SD Document and a FI Document.
The problem it´s that in the FI Document, the Sales Order field it´s empty and the Position of the Sales Order is filled correctly.
(No message appeared when I save these documents)
Then when I want to run the F.50 for closing. The batch input show the following message:
SD document is not in the database or has been archived
Message no. V1302
Diagnosis
This message is issued if no document header (VBAK) can be found
(discrepancies in R/3) for a sales requirement single record.
System Response
In the initial sales order supply, the following error message appears
'Document xxxxxx not available' V1 302.
Procedure
If an error occurs in initial data supply in APO, discrepancies have
occurred between the requirements and sales documents in R/3. This
discrepance can be corrected in R/3 using report SDRQCR21.
Can anybody help me with this??
Thanks in advance
Francisco

Hi
Kindly follow the below procedure .
First i would suggest that you check the short dumps using ST22 tranaction.
Second check if you notice any update terminates via transaction SM13.
Check these threads
UC_OBJECTS_NOT_CHARLIKE
Runtime error UC_OBJECTS_NOT_CHARLIKE
You can also check in table VBAK whether the quote references are exists.
or
This discrepance can be corrected in R/3 using report SDRQCR21.
Regards
Aravind

Sales order stock not able to use for delivery

Hi,
I am facing a issue for special stock of material.
During cut over activity some documents are created in system. One of them was a sales order and then stock was also uploaded for the sales order.
In our business special stock was required and hence stock was uploaded using 561E.
Now in between we had archived these material documents (561E). As an effect in MMBE we are able to see special stock for material but if we click on it no sales order number is displayed. The sales order is still active. At warehouse report that is MB52 sales order number is displayed.
Now when we are trying to do delivery for this sales order system is giving error message that "sales order stock does not exists" M7 184.
I am not able to do any type of movement with this stock.
I tried to correct this stock inconsistency using transaction MB5K and there were no records.
Please guide me how to get rid of this issue.
Thanks and Regards,
Adwait Bachuwar

You can even archive material documents the day after its creation, there is no defined dependency.
And your error is certainly not caused by an archived material document.
I just wonder a bit why a sales order stock is lying for 2 years in your system, this is usually short term stock, goods issued very soon after its production, as it is specially produced for one sales order.
I am not in a SAP system today as we have a public holiday to double check the values from your screen shots with my system.
Right now I somehow feel that there is something wrong with the special stock number seen in your MB52 screenshot, there is a space between the / the the first zero
Also I do not see any batch number and special stock number in MMBE screen
Can you add a screenshot from your sales order, does it really have this number which is seen in the special stock field?

Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

How to provide relation b/w sales order number & purchase order number

hi.....
i created one report based on sales order number and displayed by alv grid then by selecting one sales record using bdc i created purchase order number ,then i have to display that purchase order in alv again,hoe to provide relation b/w sales order and purchase order

This is what VA05 Does
SELECT bstkd
               vbeln "Sale order Number
               posnr
          FROM m_vmvaa
          INTO TABLE i_m_vmvaa
          FOR ALL ENTRIES IN i_bstkd
          WHERE bstkd = i_bstkd-bstkd.   "Your PO Number

VF04 display also sales order number in case of delivery based billing

Hi,
for delivery related billing VF04 displays the delivery number in column 'sales document'.
Does anyone know, if possible to display also the sales order number additonally?
thanks
MG

Hello,
it is necessary to modify the strcuture VKDFIF used to show the billing due list.
The include VKDFIZ is reversed for custom development.
You should add the field for sales order.
Then you have to fill the added field by userexit.
The SAP note [69519|https://bosap-support.wdf.sap.corp/sap/support/notes/69519] gives an idea about it (it is for another field, you have to adapt it).
Best regards,
Ivano.

CM25--display sale order number

Hi all
With transaction code: CM25 and overall profile: SAPSFCG011. We can display: Planning Table: SAPSFCG011 Finite scheduling forw./all functs.activ.
then there will be three sections, in the left of the bottom section "orders (pool)", there will be disaplay field "Sql" material" "Prio" "order" "operation" "work center" etc. but I would like to display "sale order number", because our production style is make to order. so when planner pull the production order and dispatch it, the planner needs to know the sale order number. Could be sale order number displayed here?
thanks in advance!
DanDan

This is entirely possible... please see my post from a previous post with a similar question... what you would need to do is add field KDAUF (for planned orders) or field KDAUF_AUFK (for production orders).
The configuration for manipulating the profiles and columns is a bit confusing in the IMG.
However.. if you use transaction OPD0 you can open up the configuration for the default profile that you are using in production. For instance... overall profile SAPCRPG001 uses planning table profile SAPSFCL010. If you click the button to the right of the planning table profile entry it will take you to the planning table profile configuration screen. Double click on profile SAPSFCL010.
In this transaction you will note there is an entry for Layout ID which is (if you have not changed the default config) SAPSFCLA10. If you click the button to the right of this entry it will take you to the list of Layout ID's available for you. Locate the Layout ID SAPSFCLA10, select it and double click on the "Definition of charts" option.
In this case the graphical planning table is using three different sections. Select the section that you wish to manipulate the column headings for and double click on Grouping Names option. Select the option that shows up in the next screen then click on the Grouping Names option.
Listed here should be the layout keys used in this section of the layout ID. Make note of the layout key(s). Execute transaction CY38. Input the Layout Key you wish to manipulate. From here you can select any field you would like to add/remove from the current listing.
You can click the Sequence/Heading button to manipulate the specific order of the columns and how large you want those columns to be as well as what text is displayed as the heading.
My suggestion if you are going to make changes like this is to copy the existing profiles to Z********* profiles so that you have a golden copy to work with.
Hope that helps.
Rachael

Sales order number not displaying

Similar Messages

Maybe you are looking for