Sales order number user exit in Purchase order

hi,
There is a sales order number in Purchase order(item level/account assignment/sales order no)
Now, i have to populate the SO no in orders 05.
Can any one say the user exit for populating the sales order number in PO.

Hi
Check the below exits related to purchasing in which the table EKKN is referenced
EKKN will have VBELN (sales order No) and POSNR (item of sales order)
M06B0001
Role determination for release of requisitions
M06B0001
Changes to communication structure for release of requisitions
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to communication structure for overall release of purchase requisitions
M06E0004
Changes to communication structure for release of purchasing document
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requisitions for PO split in transaction ME59
MEETA001
Determination of schedule line type (backlog, immediate requirement, forecast)
MEFLD004
Determination of earliest delivery date for checking at time of goods receipt (PO only)
MELAB001
Generation of forecast delivery schedule: realization via creation profile
MEQUERY1
Enhancement for document overview ME21N / ME51N
MEVME001
Calculation of default GR quantity and over/underdelivery tolerances
MM06E001
User exits for inbound EDI messages and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control of import data screens in purchase orders
MM06E005
Customer fields in purchasing documents
MEREQ001
Customer's own data in purchase requisitions
MM06E007
Change document for requisitions when converting into POs
MM06E008
Monitoring of contract target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MM06E011
Activation of requisition block
MM06L001
Exits for determination of ratings in vendor evaluation
MMAL0001
ALE source list distribution: outbound processing
MMAL0002
ALE source list distribution: inbound processing
MMAL0003
ALE purchasing info record distribution: outbound processing
MMAL0004
ALE purchasing info record distribution: inbound processing
MMDA0001
Default values for delivery addresses
MMFAB001
User exit for generation of releases
MRFLB001
Control items during release creation
LWBON001
Enhancement of LIS update through extension of the communication structure MCKONA (business volumes and rebate income)
LWBON003
Change settlement data for end-of-period rebate settlement before creation of settlement documents
LWSUS001
Customer-specific source determination in Retail
LMEXF001
Conditions in purchasing documents without invoice receipt
LMEKO002
Enhance communication structure KOMP for price determination
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

User Exit for Purchase Order Release Strategy

Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
Mick

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren

User Exit for Purchase Order Line Items.

I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

BADI / User exit for Purchase order(ME21N) after saving the document

Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
Ganesh

Hi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM

User exit for Purchase order

Hi,
We are creating a PO with 2 Purchase requisitions each having 5000/-INR. while creating the purchase order we changed the qty then net value becomes 12000/-INR for both PR's, so the difference is 2000/- which is 10% greater than actual net value that is 10000/-.
while saving the purchase order we need to rise one error message why means the difference value 2000/- is greater that 10%.
For that we need User Exit and any example code.
Thanks.

Hi Deepak,
Use this Badi. THis will be called at the time of saving PO. U can validate according to your requirement.
Sample coding:
METHOD if_ex_me_purchdoc_posted~posted .
      LOOP AT im_ekpo INTO lv_ekpo WHERE LOEKZ NE 'X'.
        SELECT * FROM qinf INTO lv_qinf WHERE matnr     = lv_ekpo-matnr
                                          AND lieferant = im_ekko-lifnr
                                          AND werk      = lv_ekpo-werks.
          IF sy-subrc = 0.
            IF im_ekko-bedat > lv_qinf-frei_dat.
              MESSAGE e000(zamq) WITH 'Vendor is not released by quality for material ' lv_ekpo-matnr.
            ENDIF.
          ENDIF.
        ENDSELECT.
      ENDLOOP.
ENDMETHOD.
Regards,
Sudhakar.

User exit for Purchase order to change RESB-SOBKZ

Hai,
The requirment is to change the purchase order's RESB-SOBKZ.
The purchase orders will be created in r/3 from APO & the same PO would be published back to APO.
I have to change the above metioned field at the time of PO save in R/3.
The RESB-SOBKZ actually changes the purchase orders Individual & collective indicator based on its value.
Can any one know what is the user exit for this?
I have checked 'EXIT_SAPLCPUR_001' but it dosn't have the RESB related structure.
Thanks,
Bhaskar

Hi,
I know this is very late reply to your query but i think this is the correct answer for which you are looking for.
you were searching in a right direction...just try to see the User Exit EXIT_SAPLMEPI_006 on R/3 side in which you will find the RESB-SOBKZ field in CP_POSITION parameter in Changing Tab,Assoicated Type = MEPI_PO in which SOBKZ field is there on 16th position.
Regards,
Saurabh

User Exit for Purchase Order Release.

Hi Friends,
I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
If anyone can help me for the same....!!!
I need the exact exit which triggers at the release of PO....
Points will be rewarded for the needful replies.
Regards,
Mandeep.

hai Mandeep Singh,
I am Genaralising This For U.
It Is ver EASY Procees.
Just Go To SE84
Give The PRogram Name Or PAckage name In Which ME29n is present.
Then Click On Display.
Then Click On Enhancements.
Then U will Get USer Exits Aswell As BADI 's
IF Found helpful Reward.
Regards
Eshwar

User Exit in Purchase Order

Hi,
Can anyone tell me which User Exit is triggered, when one enters Material in the Purchase Order?? Also which Include contains the User Exit? I need it urgently...
Thanks...

Hi
try using BADI : ME_PROCESS_PO_CUST
Ranga

User exit for Purchase order & Purchase requisition.

Hi,
I need the user exits/BADIs/BTE in the following events.
       1) Just before saving Purchase requisitions and After saving purchase req ( Create and Change)
      2) Just before saving Purchase Order and After saving purchase Order   ( Create and Change)
Regards,
Ganesh Nama.

Hi Experts,
I want to change delivery date in PR while creating purchase requisition ME51n.
Means need to add 7 days in delivry date field when ever it is todays date (sy-datum).
Please suggest suitable badi or EXIT.
I tried in BADI..ME_PROCESS_REQ_CUST... in PROCESS_ITEM methode
data : preqdata type mereq_item,
          v_lfdat    type sy-datum.
          prereq_x   type   mereq_itemx.
    preqdata = im_item->get_data( ).
if preqdata-lfdat = sy-datum.
prereq_x-lfdat = 'X'.
call function 'CALCULATE_DATE'
   exporting
     days              = '7'
     months            = '0'
     start_date        = sy-datum
   importing
     result_date       = v_lfdat            .
preqdata-lfdat = v_lfdat.
call method im_item->set_datax( prereq_x ).
call method im_item->set_data( preqdata ).
endif.
But systems is ignoring thi change and again coming in same badi ..so in loop.
Please tel any other way to make change is delivery date field.
Thank you.....!!!!
Nilesh.

Customer Sales Order number to display in Purchase Order idoc

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

User Exits for Purchase order & requistion to control Material description

Dear Experts,
I am creating a Purchasing requisition & Purchase order for certain Material Type. Currently user can change material description at item level without anu check. Now I have different material type like PACKING(ZPAC), Raw material(ZROH) Etc.
My requirement is like such that i want to allow change of material description of packing material(ZPAC) but system should not allow for Raw material type(ZROH). so from where i can control this?
Can any one give me EXIT name or enhancement point for Purchase order & requisition.
Thanks in advance.
Regards,
Piyush

Dear,
You can achieve this by Field selection in SPRO > MM > Purchasing > Purchase Requisition > Define Document Types > Here get the Field Selection Key for PR Doc Type
SPRO > MM > Purchasing > Purchase Requisition > Define Screen Layout at Document Level > Here for that Field Selection Key, for Selection group "Basic data, item", make field "Short text" as display.
Similarly do for PO also SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here get the Field Selection Key for PO Doc Type
SPRO > MM > Purchasing > Purchase Order > Define Screen Layout at Document Level > Here for that Field Selection Key, for Selection group "Basic data, item", make field "Short text" as display.
Note: - But in case of text Purchases, you need to create a new PR and PO Document Type. So that this config. will not have any impact on Text Purchases.
Regards,
R.Brahmankar

User Exits for Purchase order Header Text Validation

Hi Experts,
I need user exit for validate a Long text in Purchase order header data for a Particular Doc type.
We are using 4.6 B so badi is not available .
So pls tell me user exit for the same or any other method as i was unable to find user exit for this scenario.
Note : This valiadation should trigger whhile creating PO.
Warm Regards
Santosh Kumar
Edited by: Santosh L on Mar 19, 2010 9:58 AM

i have used concept of global memory through call stack

CIF User Exit for Purchase Order CIFPUR01

Hi All,
I had couple of questions related to the way CIF user Exit CIFPUR01 is called whenever there is a change in txn data related to Purchase Orders on R/3 side.
I could see that the User Exit is called only when I completely deactivate the Integration Model using CFM3, and then reactivate the same using CFM3. If I generate a new model using CFM1 and then activate the newest version using CFM3 (without deactivating the earlier version), the system doesn't call the User Exit and this is an issue because the custom code for some calculation logic that we have defined is never called !
Additionally, whenever the change in Purchase Order is done (say to the Quantity, Delivery date etc.), the User Exit is not called when change is done via ME22N and given that Integration Model is active.
Is this the correct behavior?
Any thoughts on the above behavior would be highly appreciated.
Thanks in advance,
Regards,
Prashant

Hi Vikas,
Thanks for your suggestion.
I had already tried that by putting the break points in the include of the User Exit and the control of the program didn't enter the User Exit code when I generated and activated new version of the Integration model (CFM1 followed by CFM3).
The control enters the User Exit code only when I completely deactivate the existing Integration model and then reactivate.
Below are the scenarios which explain my point.
Scenario 1:
1. Completely deactivate the existing Integration model using CFM3.
2. Put the break point on the user exit code.
3. Generate the new version of Integration model through CFM1.
4. Activate the new version through CFM3. In this case, the control goes to the user exit code and does the calculation specified by us. This is correct and works as expected.
Scenario 2:
1. The Integration model is already activated and I put the break points in the User exit code.
2. I regenerate the new version of Integration model via CFM1.
3. I activate the new version through CFM3. In this case, the control DOES NOT go to the User exit code. This is not the expected behavior.
Scenario 3:
1. The Integration model is already activated and I put the break points in the User exit code.
2. I change the PO qty for existing Purchase order.
3. The change is immediately transferred to APO as expected. The control doesn't get transferred to user exit code. Thus the custom calculation in the INCLUDE of the user exit is not done and hence custom qty is not updated in APO.
Please let me know if you would need more clarifications.
Thanks,
Prashant

Problem with User exit for Purchase Order creation/change

Hi Everyone,
I have a requirement where I have to implement an enhancement for the standard transaction(ME21N/ME22N). I need to modify a particular field of the item table (EKPO) based on a few comparisons from the header values (After save of PO). I am using the enhancement MM06E005 and its corresponding exit EXIT_SAPMM06E_013. While debugging I notice that the value is getting changed; but as soon as the control comes out of the FM, the change is not being reflected. Hoping to find a solution for this.
Thanks & Regards,
Indudhar P.G

Hi Guys,
Now I am using the BADI "ME_PROCESS_PO_CUST". But the control is not stopping at the method even though I set a breakpoint. It just saves the PO after I click save. Is this because my document type of PO is Stock Transfer Order. Can I use this BADI for STO's? and moreover how do I process each item line in this method. Does "ls_mepoitem = im_item->get_data( ).
" fetch all the item lines?
Thanks and Regards,
Indudhar P.G

Sales Order Pricing User Exit Problem

Hi,
I am facing a problem related to coding in Sales Order pricing user exits. Scenario is as mentioned below:
Based on Material Entered and Sold To in Sales Order, auto determination of a manual pricing condition happens. For doing this, coding has been done in USEREXIT_PRICING_PREPARE_TKOMP by changing XKOMV table. Auto determination of the manual price is happening properly.
From Sales Overview Screen when user goes to the Conditions tab, Net Value is not getting calculated. When we navigate away to Schedule line tab and then come back to COnditions tab, Net Value is automatically getting calculated.
AM i missing something in the coding part? As the data is getting populated automatically I guess some piece of code needs to be triggered. Can anyone shed some light into this.
Thanks in advance,
thunderans.

Prabhu: After filling in XKOMV structure, I am calling FM PRICING. On doing this, the Sales Pricing is getting calculated but even then net value of order at header i.e VBAK-NETWR is not getting populated when we are in Sales Overview screen. When, I am getting into Conditions tab and coming back to Sales Overview screen, Net value is getting populated correctly. This portion of everything not getting populated at the same time is bothering me. The pricing conditon that I am filling is a manual pricing condition.
I put a breakpoint after FM PRICING which correctly populates XKOMV structure. How do I properly update Order Net Value in Sales Overview screen wihtout having to navigate to any other tab?
Nicklas: I am looping at Order line within the user exit USEREXIT_PRICING_PREPARE_TKOMP and determining price. Once all line items are processed, I am using the FM PRICING for calculating Sales Prices.
J@Y: Request to send me a bit more details into your approach.

Sales order number user exit in Purchase order

Similar Messages

Maybe you are looking for