Sales Order Picking - Pick Release BackOrder Clarification

Dear All,
A Small Clarificaiton required in Pick Release process.
Assume the folllowing scenario
Item_A - Primary UOM is Each
Item_A - Stock avl in Subinventory_A - 10 Each
Item is packed 6 Each into a Packet and sold to Customer
Now a Sales Order is avl for Item_A (Sales Order Quantity = 2 Packets (Packet is a another UOM under the same UOM class))
Picking happens is Base UOM, so system picks Item_A in Each,when I run Pick Release.
So, now 10 Nos are picked confirmed and 2 Nos are backordered now.
But ,since I am selling it in packets, I want 6 Nos to be Pick Confirmed and remaining 4 Nos to be backordered
How to do this ?
I have tried with AutoPacking & Container fill percentages, but unable to achieve the same.
Any help is highly appreciated.
Thanks
Karthi Sankar!

1) To cancel a sales order after it is pick released, you will have to backorder the lines first. Then you can cancel them
2) No. That is the reason why in most real world scenarios, the order is closed after a gap of some days(say 30 days) after all the lines are closed.

Similar Messages

  • How to DIsable Partial Pick Release in Sales Order Pick Release

    Hi Everyone,
    A Basic doubt.
    In Sales Order Pick Release, supposing I want to pick only if the entire requested quantity is available.
    I would rather have the Order Backordered than to pick partially.
    How to enable this.(similar to what we have in the COmponent Pick Release in WIP)
    regards,
    Karthi Sankar!

    Hi Karthi,
    To prevent a partial Pick Release:
    1. Make each of the sales order lines a Ship Set
    On the Sales Order, Lines, Shipping tab
    Scroll to the right for Ship Set column
    Enter a Ship Set number.
    2. In Shipping Parameters, Pick Release tab, check the box for Enforce Ship Sets and Ship Models
    Note: - Each Sales Order line should have a unique ship set number -
    Unless you want some of the lines to ship together.
    If that is the case, then the lines that need to ship together should have same set numbers
    Thanks & Regards,
    Srinivasulu Vakati

  • Sales Order - Pick remarks copy to Production Order remarks field

    Hi All
    I need help with the query to copy sales order - pick remarks to Production Order when the Sales Order is linked with the production order.
    Thanks
    Bongani Dlamini

    Hi All
    I still need some help with this issue.
    Here's the scenario:-
    When a user captures a Sales Order , (s)he must enter remarks in the Logistics Tab --> Pick and Pack Remarks ( to be renamed to Production Remarks).
    This info must be copied when a production manager or supervisor creates a production order and links it to the Sales Order field on the header .
    Tried a couple or tricks but still nothing.
    SELECT $[ORDR.PickRmark]
    SELECT T1.[PickRmrk] FROM OWOR T0 , ORDR T1 WHERE T1.[DocNum] =  T0.[OriginNum]
    SELECT $[ORDR.PickRmrk]
    Please help.
    Thanks
    Bongani Dlamini

  • Project Sale order Pick Transaction

    Hi,
    The client implemented PJM and PJC.
    In some of our scnerios the sales order pick transactions is getting cost collected.
    As per my understanding, Project releated sales order will pick inventory item from project locator while shipping. So the item should be in the Project locator to do the shipping. if the item is in inventory some other locator then it should be moved to project locator(Project Transfer). then the sales order will pick the item for shipping. So the project transfer will get collected not the sale order pick transactions.
    can someone help to me understand at what scneario sale order pick transaction will get cost collected for projects.
    Thanks
    Govind

    Hi
    Your understanding is correct.
    However, if user is picking the item direclty from a common locator or another project locator, I would expect to see such transactions being cost collected.
    Dina

  • RFC/BAPI For Sales Order Credit Block Release like vkm3 (very urgent )!!

    hi experts,
    I need the RFC/BAPI For Sales Order Credit Block Release like vkm3 function ,please help
    thanks
    Godspeed

    hi
    can get the list of all the bapis..
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    Reward if USeful
    Thanx & regards.
    Naren..

  • Sales order picked the batch which will expire before the delivery date

    Hello All,
    I have a material MAT1 with Batch BAT1 which has the shelf life expiration date as 18.03.2014. A sales order was created on 16.03.2014 which is supposed to be delivered on 22.03.2013.
    In this case the sales order should'nt have picked the batch BAT1.
    In the material master for MAT1- Min. Rem. Shelf Life 1 Month.
    Please let me know what could be the reason to pick this batch which is not expected...
    Thanks in advance!!

    There are 2 things:
    Check whether you have a characteristics LOBM_RLZ - Remaining Shelf Life for Batch for respective class used for batch. In batch search strategy(VCH1) for the material Remaining Shelf Life for Batch should be greater then equal to 7 days.
    In your movement type used for the GI, check at least SLExpir.date is not equal to 3 - No check at goods issue.
    Thanks, JP

  • WMS Sales Order Pick Load Task

    On WMS when picking sales order task if the task quantity is equal to the remaining quantity on the locator/LPN the system automatically loads the serials after you enter the locator and LPN details. Is it possible to enforce that users must always scan the serials and prevent the system from automatically loading the serials if its the quantity to pick agrees with the remaining LPN qunatity.
    Navigation
    WMS Mobile - Task - Directed Task - Interleaved Task - Accept Any Task

    Hi Rajiv,
    It would be good to flesh out the details a bit more, but Accellos One Warehouse should be able to accomplish what you are requesting.
    Feel free to send me a text with your email address so that we can correspond privately.
    Regards,
    Carl Marin
    +1 514 516 1861

  • How to Avoid sales orders from getting released

    Hi,
    We have done following :
    1. Created sales orders in AT org.
    2. Ran ASCP plan
    3. Sales order is considered as demand and the corresponding planned order is created in AT org.
    4. corresponding Internal Requisition is created in AT org and internal sales order is created in BE org (The sourcing rule for AT suggests to transfer 100% from BE).
    5. Now again the ASCP plan is run.
    6. The same sales order is again considered as demand and all the corresponding documents are also created (means, planned order, internal requisition, internal sales order).
    The requirement is that the sales order should continue being considered in the plan run as the demand so that it can be taken in the ATP calculation, but the corresponding IR should not be created each time the plan is run.
    I have modified the Visible_demand_flag of sales order line as 'N'. but problem is that orders are not even getting considered as demand till the flag is again reset as 'Y'.
    Please help is this. This has to be displayed in UAT to users.
    Regards.

    1)     Planning should not recommend new planned order if there is already a requisition to fulfill SO demand. Did you see that every time, a new planned is created for same SO demand ? Then you would need to ensure that Requisitions are being collected.
    2)     To prevent releasing the Planned Order – this can be done by populating item attribute ‘Release Time Fence’ – Kanban Item (Do Not Release)

  • Blocked sales order is not released from VKM3

    Hi
    We are using credit management and when a sales order is created with the amount, which is more than credit limit, system is blocking the sales order for delivery. Values are getting updated in FD32 and S066 and S067. When i tried to release the sales order from VKM3, sales order was displayed, but when i selected the release flag and saved it, still the order is not released. Order is having credit limit block in sales order in shipping tab at header level. Why system is not releasing the sales order even it is displayed in VKM3
    Please respond
    Regards
    Srinivas

    hi,
    check the following steps of assignment you did right or not
    1)first check in  t- code FD32 U  assigned authorization person & each credit limit U shud assign
    an authorization person along with credit limit
    2) check - conditon records with KRML output is there or not
    please read standard SAP config help as a check point doc.....[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
    let me know if it is soling your issue
    Regards,
    Rajeev

  • Payment against sales order and subsequent release

    Hi Team,
    The client wants to save the sales order only after getting the payment.can any body tell me how to configure or to control the scenario.
    Example:on receipt of payment either through PDC or cash the client wants to generate the sales order .infact the client expects system acknowledgement by way of linking the sales order at the time of recieving the payment.
    Thanks
    Kartik

    Kartik,
    During initial processing of sales order, put a order block say " Payment Expected", and save the order. Upon receiving the payment, release the order. Also, once released, the system will generate the requirements, and the subsequent steps can be processed further.
    Let me know for any other solutions. This is from the intial understanding fo the requirement. Please let us know more details of te business process for a correct solution.
    Regards,
    Sreekanth

  • Sales Order Line Hold Release from API

    Hi Expecrts,
    I need one help, by using pl/sql program i want to hold release sales order line, I can see the oe_hold_pub api. but it contain three release_hold procedures. Which one i can use? what parameter i need to pass for line level only. line level release_hold should not impact to header level holds.
    if possible, please can you provide the api and its parameters.
    Thanks
    reddy

    Put an audit trail on the ordered_quantity field and use oe_order_lines_all_ac1 view.
    It will give you what you need.
    Hope this helps,
    Sandeep Gandhi

  • Bapi For Blocked sales orders & Bapi for Releasing those orders

    Hi All,
        Can anybody help me regarding <b>Bapi</b> for getting <b>Blocked sales orders</b> and bapi for <b>releasing</b> those sales orders..
    Any help will be rewarded...
    Thanks..
    Regards,
    Srinivas.

    Use bapi:
    BAPI_SALESORDER_GETLIST to get the list of all sales orders based on Parameters
    CUSTOMER_NUMBER
    SALES_ORGANIZATION
    MATERIAL
    DOCUMENT_DATE
    DOCUMENT_DATE_TO
    PURCHASE_ORDER
    Then,
    loop at the internal table
    and use the bapi BAPI_SALESORDER_GETSTATUS to get the status of each sales order.
    choose only which are blocked.
    Regards,
    ravi

  • Sales order and automatic release of prod order

    please tell me how a sales order can be automatically converted into production order by running MRP.
    please give me configuration details

    Hi Kumar
    Please letus know the planning startegy .
    If MTO  u can use planning startegy = 82,
    When  u create sale order for header material , assembly prod  order will be created automatically with out MRP Run.If u have Multi level Bom u have to run MRP.
    MRP will not create prod order directly, it will create planned order based on cutomer requirements, u have to convert it to prod order manually.   
    Regards
    Pradeep

  • Sales Order Picking Issue

    My Client on 11.5.10.2 version has this issue. Users have two lots allocated on the same Pick ID. Then when user fills the order in telnet(WMS on paper pick), they choose only one lot but are filling less than 100% of the order. The remaining lot that is not selected auto picks the balance to get the order to 100%. Please note that Shipping parameters of org for picking and Picking rules auto allocation is set to yes.
    Is this intended functionality or a product bug?
    Thanks,
    Prashanth

    Hi,
    Check in OVZ3
    what is "Availability check" assigned for the combination of "Material type"+ "Plant".
    change as per your requirement  and try.
    Thanks,
    Krishna.

  • Need help on IDoc for Picking, Packing and PGI against the Sale order

    Hi All,
    I am new to this IDoc stuffs. Below is the scenario for which I would like to know the details of the IDoc...
    Business Case:
    1. Storage location is a HU Managed but not WM managed.
    2. This storage locations is managed by a third party
    3. Outbound delivery document against the SO will be created by our personnels in SAP for this storage location.
    4. Picking, Packing and PGI needs to happen/post via Idoc. (By packing here, i refer to assign the HUs that are already created for the materials and is available in the storage location and not repacking)
    Is there any standard IDoc that can be used here to Pick, Pack and post PGI. We would like to have picking and packing in a first idoc and PGI on the second idoc.
    Thanks,
    Prashant

    Hi Typewriter,
    Thanks for your reply on this post..
    The business process is as below (it was changed recently to have the creation of OBD, pick HUS and then post GI via single IDOC)
    1. We have a storage loc in our enterprise structure that is HU managed but not WM managed.
    2. This storage loc is being maintained by a third party.
    3. SO will be created to be shipped out of this plant/sloc.
    3. The stocks at this storage loc will be Special stock "E" against the sales order. And the stocks will be Packed in HUs.
    4. The third party is informed to deliver the stocks (HUs - that do have the special stock number which internally refers to the the SO number and the line item number) directly to ship to party address in SO.
    5. The 3rd party will physically ship the HUs to customer and send in the details that they have shipped goods against the sales order.
    6. The details sent by the 3rd party will be received in SAP to create OBD for the sales order, Pick, Pack and post GI. This can happen via a single IDOC..
    I am now planning to create a custom IDOC type referring to the standard IDOC type DELVRY03 and message type DESADV and to use a custom BAPI/FM.
    Do you think I am using the right ones?
    Thanks,
    Prashant Kumar

Maybe you are looking for