Sales order qty display

On my sales order qty only 'four digit' numbers show up.
For example, 1000 will show up on the print out.
However, 10000 will not show up and will be desplayed as *000 with an *
How do i get all digits to display?
Edited by: ManjeetSingh on Mar 16, 2010 1:42 AM

Ask your ABAPer to do the changes in the Smart Form of Sales Order.It is due to settings maintained in the Smart Form which allow to show only 4 digit for Sales Order Quantity.
Best Regards,
Ankur

Similar Messages

  • Logic for Open Sales order qty

    What should be the logic given to determine "open sales order qty" during designing a report.
    Note the criterias are as under:
    1) Open sales order qty is the confirmed qty less the delivery qty.
    2) The delivery qty should be delivery order qty (The delivery should not necessarily be pick, packed & PGI)

    sorry it doesn't work for services, since they do not create requirements.
    in this case you can use VBFA table, subracting all the delivered quantities VBFA-RFMNG with VBFA-VBTYP_N = J and VBFA-VBELV/VBFA-POSNV = to your order/item from the ordered quantities
    hope  this help you.
    Roberto

  • Sales order qty not updated in copa

    Hi Gurus,
    My client has activated Costing based COPA.
    We have activated Incoming sales orders with option
    Transfer with date of deliery/scheduled billing date.
    When We are posting sales order we are able to see a copa document with record type A.
    In that document we want to see the Sales order quantity or delivery quantity, delivery date fileds.Please let me know what all the value fields We need to assign.
    Do I need to write any derivation rule for incoming sales arders also.
    we are able to capture the  total price, material etc from the sales order in COPA document.We need only sales order qty or Delivery qty or delivery date to be updated in COPA document.
    Please suggest me
    Regards
    Chaitanya

    Hi Chait,
    Pl check whether your client has assigned SD Qty Fields to COPA Quantity fields in KE4M. Sd quantity fields are FKIMG- Billed Quantity, KWMENG-Order Quantity and the same shall be assigned to ABSMG-Sales Quantity. If not, please maintain the same. Otherwise, we need to look for some other work around solution.
    Trust this resolve your problem!
    Cheers!

  • Sales order qty not confirmed when delivery done with partial qty

    Hi Guru's
    Need your help............
    We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order. 
    I checked all configurations regarding availability check but could not found.
    Example:
         Sales order line item qty: 4            -      2 qty confirmed (delivered).
         For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
    plz help me to fix this issue?
    regards
    sai

    Hi,
    Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
    Regards
    Gavin

  • Sales order qty not possible to change.

    hi experts
    i have created a sales order with suppersession material  for 2 qty and we deliver only 1 qty to customer.
    now i want change the sales order qty 1 so that status gets completed.
    but in VA02 material qty is in hidden mode cant possible to make changes. this is happening with suppersession material only.
    need your support
    thank you

    hi dear
    thanks for the reply again
    schedule line is also in grey mode. cant possible to make changes.
    let me add on this
    when we create order suppersession material entered with item cat. TAPA which generate automated second line item cat TAN. when we make delivery TAN gets copied in the DO and Billing afterthat.
    but issue is once delivery created. in VA02 order oty field (KWMENG)  become in grey mode. cant possible make any changes ?
    i have checked both the item categories completion rule which is (not relevent for completion)

  • Va05 open sales order qty

    Hi,
    When we run the VA05 Transaction it is not showing the open sales order qty as out put.
    Please help me how can achieve it.
    we are using 4.7
    Thank you.

    Hello ,
    you'll find the documentation via customizing (Transaction SPRO) : Path
    Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
    You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
    For both you'll need an object registration in OSS.
    Regards Wolfgang

  • Confirmation of the production order qty equal to sales order qty

    Hi Experts,
    I need to control the confirmation of the production order should be equal to sales order qty.
    I'm having the scenario as follows
    If sale order qty for X material = 3
    while running the MRP, system will plan the order qty as 8 because of we maintained rounding profile in the Material master and enhancement we used for this.
    Rounding Profile Qty=5
    Total Production Order Qty=8.
    But, finally they will do the GRN for sales order qty only, remaining will be used for testing purpose.
    So, the confirmation also has to happen for only sales order qty. There, we need to control the qty based on the sales order.
    Is there any exit or Enhancement is available for this.
    Please help me.
    Naren

    Hi,
    Exit for confirmation check is CONFPP04.
    However, opening orders for quantities higher than demand and leaving pieces undelivered and unconfirmed in production orders does not make sense. I could not get the requirement of incresing production quantity by adding rounding value? Moreover, if rounding is to be used for test purposes, why not do you receive them into stock? Why don't you receive 8 pieces into stock, deliver 3 pieces to sales order and transfer 5 pieces to related department?
    If it is because of MRP and you really do not want to produce extra 5 piece immediately, you may use material reservation or any other form of demand for 5 pieces, use EX for lot size calculation and have MRP create two planned orders for sales order and testing requirement, then you can convert planned order for sales order requirement into production order and continue processing.
    Regards.

  • REPORT-Sales Order Qty minus Delivery Qty

    How to find Sales Order Qty minus Delivery Qty  in a STd report  other than t.code v.02
    THanks in advance
    Paul

    Dear Paul
    The report which you are asking is a Pending Order Report.
    You  better go for a Zreport & call your required fields in the report.
    The selection field will be plant
    Eg: You can incorporate in the report Sales Doc, Order type, Doc date, SP, SH, Region, sales area, material code, material description, Order qty, Pend qty, Pending value, pant, PO ref no., date, Customer currency etc.
    Once all items delivered the doc number wont be in the report.
    Regards
    Deepu Pillai

  • All fields in sales orders in display

    Hi All,
    Upon a certain condition, I need to make all fields in header and item of sales order as display(greyed out).
    Can anyone let me know how this can be done.
    Thanks in advance,
    Regards,
    Srikar
    Message was edited by: Srikar Nagarajan

    hi,
       it can be done through user exit. find suitable user exit for you Tcode and write code using SCREEN table for making the fields gray(display mode) .
    try the exit : EXIT_SAPFV45S_002.
    in the aboue exit header data will available in I_VBAK, but you have to check is it suitable for your reauirement or not.
    the following are the exits available for sales order
    Exit Name         
    SDTRM001          
    V45A0001          
    V45A0002          
    V45A0003          
    V45A0004          
    V45E0001          
    V45E0002          
    V45L0001          
    V45P0001          
    V45S0001          
    V45S0003          
    V45S0004          
    V45W0001          
    V46H0001          
    V60F0001          
    Sudheer.A
    Message was edited by: sudheer Addepalli

  • Change in Sales Order Qty in a MTO scenario

    Hi,
    We had confirmed 5 Qty for the Production Order created with reference to Sales ORder(MTO scenario), now after confirmation of 5 qty, sales order qty is reduced to 3., then in this situation, what we need to do for the already confirmed extra Quantity 2 for this sales order. I think we need to cancel the confirmation for the extra qty 2?. Please clarify and explain what we need to do this for this extra Qty 2 in detail.
    Case 2) If the Sales Order qty is changed to 7, then we will be creating a new Production Order for this new quantity 2 with reference to the same sales order.  Am i correct?.IF wrong, please suggest how should we balance the extra requirement of 2 EA.
    Thanks in advance.

    Is your query being posted even before you actually tried the 2 cases which you refer to in your system?
    If so, then first do the simulation in your sandbox, check how system behaves when you do that. Also check by clicking on ATP check for the material within SO.
    Once you do the above your query will be self answered, if you still face any issue then revert with the specific details.

  • How to make a field in Sales order as Display

    Hi Friends,
    I want to make the field pricing date in sales order as display only. Currently the field is changeable.
    Can someone please tell me how can i do this.
    Regards,
    Wasim.

    hi
    Follow the below steps.
    T-Code SE51(Screen Painter)
    Give Program Name SAPMV45A (before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
    Screen Number 4440(before doing this confirm from the field from sales order, keep curcer on the pricing date press F1 and then select technical details)
    Select Attributes radio button.
    Go to Element list Tab. Inturn select Special Attribute tab in Subscreen.
    For Field Name "VBKD-PRSDT" make Input as "OUTPUT" (DISPLAY).
    Hope this will help you

  • Update sales order qty through BAPI_SALESORDER_CREATEFROMDAT2

    HI
    Can anybody help me out.  I have the requirement for creating sales order through BAPI_SALESORDER_CREATEFROMDAT2. The sales order is created but with 0 quantity.
    I am using fields RNDDLV_QTY and TARGET_QTY and REQ_QTY in schedule lines & also setting the update indicator to 'X'  in the corresponding itemx structures.
    In fact it used to work earlier and has stopped now. I am also checking if there could be any change in configuration but don't think this should be the reason.
    Can someone guide me as to which quantity fields of the BAPI are the right ones to update sales order qty?
    thanks

    Hi,
    You are using the correct fields i.e. TARGET_QTY and REQ_QTY. Just check if you are passing the same Item Number in both the tables.
    Hope it helps...
    Lokesh

  • Reserved sales order qty based on sales order

    Dear All,
    is there any way to reserve the sales order qty in stock based on the sales order?. Actually i want to block the some qty for paticular sales order.  For example I created one sales order with 100 qty of x article and now i want to delivery of sales order with the  same qty after one month . In this case i want to reserve this qty for this sales order that should be not deliverd by another sales order.
    Thanks
    Abhi

    Hi,
    Block this qty against sales order
    MB1B >>> Use movement 413 & enter
    Speciefy sales order number & item number
    Then this qty will be permanently reserved or blocked for the perticular order.
    Kapil

  • User exit for sale order qty change

    Hi all,
    In our industry we are creating Sale Order for MTO Scenario by using T.Code VA01 . Most of the time after taking the MRP run and raising PO for BOM components, Users are changing the qty in the sale order . eg. and due to that it is becoming difficult to make necessary change in production programe. .Now please give me solution/ userexit  so that anybody cannot change the sale  order qty and it must be check the authorised userid to do necessary change in sale order.
    I am waiting for your valuable suggestion.
    Thanks & Regards

    Hi LIMAYE,
      You can use user exit include 'MV45AFZZ'.
    Make necessary changes in FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    XVBAP will contain the old values before making the changes. You can comapare the quantity wtih VBAP field.

  • Spliting the sales order qty when iam creating production order

    HI
    I have sales order haveing qty 100 ,then iam creating the production order with respect to salesorder number and item by co08.
    i want to split the order qty while iam creating production order .and after complitiung the sales order qty sysytem should not allow to create production order .
    how can i do this

    Hi,
    1. I dont think in standard it is possible.
    2. You need to find a control mechanism using the user exit only.
    reg
    dsk

Maybe you are looking for