Sales order stock on delivery document and transfer order

Hi all,
At my current client I have a requirement where we need to put stock against sales order (sales order stock E). So, being a MTO process we create production order and perform goods reciept to unrestricted stock. To avoid getting picked up by a different sales order, we move the stock to sales order stock using 412 E (tcode: MB1B). Here are the issues I am facing currently:
1. Is there a direct way of receiving production order directly to sales order stock?
2. I couldn't find a way to do the first, so I am currently receiving production order against unrestricted inventory and then move it using MB1B. So, the stock can be seen to assigned to sales order.
2a. When I create delivery it is not consuming same stock, it is consuming inventory out of unrestricted stock (if any, in case no inventory is available it throws error of 0 available quantity). Once I have assigned sales order stock why is it still looking into unrestricted? Is it due to the requirement type which is assigned. Do I need to change the item category so availability will check sales order stock (similar to item category TAB)?
2b. This probably will be resolved if I get the delivery fixed but we have SAP WM and during TO creation I don't see the special stock reference filled in? I tested this process with item category ZTAB (copy of TAB) which creates purchase requisition and it seems to be working but I don't need the purchase req for my case.
3. This is more of an accounting issue: when I attempt to move stock from unrestricted to sales order stock using 412 E, I was getting "Account XXXXX is not assigned to cost center". So, I went in an assigned a cost center to this cost element. IS THIS REQUIRED & WHAT IS THE RELEVANCE as it takes stock out of inventory.
I understand it crosses other functional areas but even if you can clarify 1 part of it, will be very helpful.
Thanks.
Naren

Dear Friend
You are telling that it is MTO scenario and you are posting stocks into unrestricted stocks
This is entirely wrong
This is happening because of a simple thing missing in your sales order item category configuration in VOV7 that is special stock indicator E is missing which should be there
This is the cause of whole problem
MTO item categories will have special stock indicator E in standards
In MTO based on the sales order production order is triggered and stocks are receipted against sales order and not into unrestricted use by defaut in standard
You will receive MTO stocks as sales order stocks in your plant only in standard
But it is not happening for you because of stock indicator E in VOV7 of your sales order item category is missing
Posting MTO stock in to unrestricted use is meaningless and the same is happening because of a slight miss out in setting in VOV7
This is the solution for issue no 1
For issue no 2
You have created the sales order( MTO order) without special stock indicator E and now you are doing a transfer posting in MB1B with 412 E referencing the order no sales order stocks that is Fine
You are getting an error that only zero qty is available either at delivery or at pgi eventhough in MMBE you will find sales order stocks in your order name
This is happening because
Reservation in MB1B is done with special stock indicator E for sales order
But the same sales order is not created with special stock indicator E in VA01 during creation
There is a mismatch
Hence the system is not able to sense while the order comes for delivery there are already stocks are reserved
By inputting special stock indicator E for sales order item category the whole issues will get solved
By doing that there is no need to do MB1B itself
The first step itself will get corrected as the stocks will be posted to sales order stocks no need for MB1B
No need to touch TAB make it ZTAB as it is meant for a different purpose it is for individual purchase order not to be used for MTO
*By marking the special stock indicator as E in your sales order item category your entire issue will be resolved*
Issue no 3
MTO is based on costing for which you have take the help of FI person
Note Very important
If U make the settings now in item category it will not work for the existing or already created order
With existing orders it will have the same error as the order is created without special stock indicator E
Only for new orders it will work and from Now on it will work
Test it with new order cycle starting from VA01
Please let me know this issue has got solved or not?
I am 200 % sure it will get solved
Regards
Raja

Similar Messages

How to create wave pick document and transfer order from that document

Hi All,
I want to create wave pick document based on delivery and correspondingly want to create transfer order for that. My requirement is that if in 3 delivery i have to pick material M1 as 100, 50, 100 qty then when i create wave pick for these deliveries and create Transfer order by this wave pick doc it should pick from single bin of warehouse , currently it is picking from 3 different bins though qty in each bin is more than 250 in each bin. Also suggest me the configuration requred for this.
Thanks in advance:

Hello Gordon, tha is working perfect now I finaly get the forecasted items in my MRP window If I click on show recommendations I see he recommends he wants to order some pcs, and Indd what I split in to Buy or Make is separated in an Production order. But how do I change the recommendations into orders?

Maximum no of Line items for sales order,delivery document and billing docu

Dear friends,
How many line items we can enter for the following,
1) a Sales order
2) a Delivery document
3) a Billing Document
Thanks in advance.
Regards,
Shrikant

Hello,
the maximum limit of line items are as follows
order-9999
for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
you have a sap note , which offers suggestions to partially over come this
hope this helps
Thanks
akasha

Find the sales order number with delivery document

hi:
i want to quickly look for the delivery document related the sales order ,now i find it via se16 in talble vbfa.
please help me provied with means.
best regards.

hello, friend.
you can go to your delivery document and click on the 'document flow' icon. you will see the sales order number there.
regards.

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Delivery document from Purchase Order

Hi Experts,
How can I create a delivery document from Purchase order type NB?
I have created a delivery from po type UB, and there is a shipping tab at the item. Do I need also a shipping tab in NB to create a delivery? If yes, how can I customize it?
Thanks.

Hi
I think you are talking about NB for intercompnay stock transport order. For that you need to customization in below link
spro>MM>purchasing>Purchase order>setup stock transport order
Apart from STO there is no ther delivery for PO. Because for PO you can do only inbound delivery. For that you need to have confirmation control key defined in customization and then you need to give it in PO. Then you can create a inbound delivery for PO and gainst inbound delivery you can make GR.
Regards
Antony

ISO UoM vs USA UoM for SO and Transfer Order

Hi to All,
I've an issue that I must resolve urgently!!! So, I hope in your precious advices.
Case: Customer Model: Holding with european company codes and americans ones.
The corporate is an Italian Company. So, Materials Master Data are created centrally at Italian Company; consequently the Base Unit of Measure in which stocks of the material are managed (Master Data: view Basic data 1) is expressed in ISO UoMs( Kg, dm3....).
I have the necessity to use also american UoMs so I've created in Additional Data -> Unit of Measure alternative TU and CU using USA UoMs for the dimensions (lb, "3....) in corrispondence to europeanTU and CU.
I can use them on Sales Order, and Transfer Order with type ZT02 STO Cross Company but I can't use them for ZT01 STO from APS: Transfer order intra- company becouse as default the Base Unit of Measure is used.
Does it exist a way to convert the Base Unit of Measure expressed in ISO UoMs to USA UoMs for dimensions without modyfing the Base Unit of Measure set in Master Data: view Basic data 1?
Thanks in advance
Roberta

Hi,
If you want to create any transaction with only alternative unit of measure you don't active variable active unit of measure in purchasing view of material master. In this field take not active.
Variable Active unit:
When you required to create any transaction with both unit of measure base unit and alternetive unit of measure you active it and if you want to create transaction with only alternative unit you don't active it.
NOTE: - In case of Purchase order system take order unit of measure(In Purchasing view) and for stock transfer order take unit of issue(Plant Data1) - If variable active unit is off.
Regards,
Mahessh

Possible to delete delivery even though Transfer Order exists

Dear Experts
I am able to delete deliveries even though Transfer order exists and confirmed. How can I restrict this as in this Transfer Order remains open without delivery in Place.
Regards,
Neeraj Srivatava

Hi Frenchy
Many thanks for your valuable inputs.
What is the reason I can delete delivery even after Transfer Order is confirmed. This will leave the Picked stock stranded in Dispatch area which cannot be linked with any delivery.
Regards,
Edited by: NEERAJ SRIVASTAVA on Aug 13, 2008 2:42 PM

Retrieve Multiple Serial Numbers for given Delivery Document and Item

Hello Experts,
                      I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
Please provide me with the CMOD logic to do so.

Hi,
You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
LIPS into corresponding fields of Table ITAB_LIPS.
4) write one more select statement to fetch Serial number data.
Select DEL DOC, DEL ITEM ZZSERNO from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
where DEL DOC = ITAB_LIPS-DEL DOC and
            DEL ITEM = ITAB_LIPS-DEL ITEM.
Loop at ITAB_OBJK.
Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
IF SY-SUBRC = 0.
ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
ENDIF
ENDLOOP.
Hope the above code helps
Sujan

Req. delivery date and plan order finish date relationship

Dear Experts,
I have a question on setting the req. delivery date and plan order finish date relationship. Now, I want the plan order finish date is one day before the req. delivery date, is it possible to set it in configuration? Please advised! Many thanks!
Regards,
Matt Yim

Matt,
Please use a schedule margin key(SMK) in the material master MPR2 view which has float after production defined as 1day.
If there are no SMK with that defination then you can define you own in customisation and assign the same in the material master. (SPRO--->Production ->MRP->Planning ->Scheduling and Capacity Parameters->Define Floats).
Regards,
Prasobh

User exits for delivery picking confirmation and transfer order creation

Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
Supreeth

Hi,
Check the following users exits.
MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
MWMRFUP             Customer defined general purpose pushbutton called from scr.
MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003            Customer Exit for Replenishment using RLLNACH1
MWMRP004            User Exit for Replenishment using RLLNACH4
MWMTO001            Enhancements for end of transfer order generation
MWMTO010            Exit: Calculation of Total Planned TO Processing Time
MWMTO011            Correction of Planned Processing Time for TO Item
MWMTO012            Correction of Sorting and Split Transfer Order
MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3            Separate selection of posting changes for autom.TO creation
MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001            Transfer order print via RLVSDR40
MWMD0002            Transfer order print as multiple process with RLKOMM40
MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11            Enhancement for message WMTORD: TO with several items
MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali

STO of Sales order stock via delivery

Hi,
We have plants in many locations. We create sales order (TAB) in plant A sloc 0001 with individual purchase order . Supplier delivers the goods to the distribution centre (a different plant plant B or same plant A diff storage location Sloc 0002 ). Now the distribution centre (plant B) wants ship these materials along with other regular shipments to the Plant A. I created an STO, but when create the delivery using VL10B, I get an error message that the Material is not in PLant A Sloc 0002.
Do I have to do any other configuration?
Thanks
Ravi

Hi Raja,
Thanks for your detailed response. Here is answers to your question.
Why do you do that?Why not in plant A sloc 0001
OK if for any administrative reasons you receive the stocks in different plant B or same plant A
diff storage location Sloc 0002
As explained initially, plant A and Plant B (or PLant A sloc 0001) are geographically apart. Plant B is the distribution centre. So it was agreed with vendor that he can ship all materials to distribution centre.
Hope i have clearly understood your process
Yes. Spot on.
In MMBE it should show as sales order stocks in the sales order no you have created first in
same plant A diff storage location Sloc 0002 or different plant plant B
Yes it is showing in PLant B Sloc 0002 as sales order stock.
If you are getting the shipping tab in the STO then it means the config from SD side is correct
Yes I checked the STO. Shipping tab and details look ok. I missed it in my earlier post. When I create the STO I get the availability check message that says that "of the material only 0.0 EA is available on desired date" which means that it does not recognise the
Sales Order stock. I create the STO woth account assignment "M". I hope that is correct.
TAB is with special stock indicator E rom SD side in VOV7 so along with movement types in
MB1B use special stock indicator E also With MB1B things should workout for you
You have given me a clue here. I think I need to configure a new item category for the sloc to sloc delivery in vov7 to activate the sales order stock.
I will come back to you after testin this one,
Thanks a lot
Ravi

Sales Order -- Update the delivery Document Credit status using FM or BAPI

hi All,
The requirment is quite urgent...... Actually i am Using a userexit V56FSTAT through VT02N and want to update the credit status through VKM4 Transation. But i require a Function module or Bapi to Update the credit status of the delivery status.
Please do give me suitable Function module or Bapi through which i can perform the VKM4 transation to update the credit status of delivery document....

when we go to vkm4 there we click on the reassign button and save then the status is changed in VBUK table....
so i have to perform this steps through VT02N transation....
Ny ways thanks for the reply,
i guess i require more support fom u all
Message was edited by:
siddharth samal

Pricing date in delivery document and billing document

Hi All,
Pricing date in billing document can be controlled by copy control between order and billing document. This config is done in the field Pricing source. If i its set as "order", then my pricing date in billing doc will be same as that of order document pricing date. Tell me if i am right???
Where can i maintain the setting for determining the pricing date in delivery document.???

Hi Tushar
Where do you find Pricing date in Delivery and Billing ?
Pricing date is in Sales order, system takes rate of the pricing conditions valid on this date, from their condition record.
Are you talking of Pricing in Billing document, whether it will be copied from sales order, or delivery document etc , Right?
It is controlled from the "Pricing source" field (D- delivery, Blank- order,E - delivery/order etc.) in the copy control table at item level (VTFL).
Suppose, the value is E, that means Pricing data will be copied from order aswell as delivery(if any).
The copied will be copied as it is or Tax will be redermined or Freight will be redetermined etc will be decided from the "Pricing type "field.

Delivery document data transfer to non sap server.

Hi,
My requirement is ,when i created delivery label (vl01), this delivery document should be sent to FTP server instead of printer in flat file format.
Normally for delivery document printing we use VL71 t.code,but in my requirement i have to create new program and configure this program in NACU tcode for particular output type.
How we approach this scenario, please help me.(for data down load to flat file and transfer to server).
Thanks in advance.

Hi,
I think you are mixing different concepts. UD connect , DB connect and Web services are methods to upload data from non-SAP source systems to BW. Ud connect is to loada data from SQL tables , DB connect from oracle table.
If you want to transfer data to other systems Open hub is the easiest way. You can put the data in a flat table throught the open hub. You can fill the table with delta method.
Open hub allows to load data from, infocubes, dso, or infoobjects.
I hope it helps.

Sales order stock on delivery document and transfer order

Similar Messages

Maybe you are looking for