Sales Order Stock - Problem with Schedule line

Hi guru,
I have a problem with my schedules line.
We use the Sales order stock ( using MB1B with good movement  412/E) for some specific customers.
Even if the sales order reservation works well, there is an issue with the schedule line in the order.
Indeed when i enter the material in the order the schedule line display an availibily in 8 days even if the material is out of stock or available now....
When i enter the same materila in a standard order(with item category without special stock E) the schedules line are good...
What is it the most weird is that i have done the customizing by copying the standard item and i have just added the special stock E in the item category.
If anyone can help me!!
Thanks a lot

hello Lakshmipathi,
Thanks a lot for your reply.
I tried to change the requierement class in order to put one with special stock E as you explained, but i still have my weird schedule line. When i put the item in the order it is 0 stock for today, but stock find in 12 days either if there is stock or no(unrestricted stock i mean).
If i change the RDD in more than 12 days the stock is available for the date requested.
If you have an idea of what could be wrong because on my case i want the schedule line to be at 0 while the sales order reservation has not been processed (via MB1B/412/E) and once the stock movement is done the schedule line has to be find.
I dont know if im clear enought..
To be more clear,  i want the schedule line based on the "sales order stock" and not on the "unrestricted stock".
thanks for your help!
Guillaume

Similar Messages

  • Sales order settlement Problem with Internal Order

    HI Dear Friends,
    How are you, I am fine.
    We have 1 Process here Related with SD & FI/CO
    for 1 process we have treat as a small Project,
    the process is we have make 1st Contract and create Internal order and assign Internal order to Contract
    then Create Sales Release Order and assing Internal Order in Settlement Rule in Sales order.
    then we create billing ref to Contract and then we did PGI.
    1) at billing time the Internal Order is Updatting
    2) at PGI time internal Order is not updating  - what is the right process - the internal; Order will be updating or not
    then we have to do Sales order Settlement thtough Trasaction code VA88
    what will happned at this level pleas be advicsed becos when i do this it is giving messges not is toi be settled.
    Friends I did all exercise complete except Settlement trough T-Code VA88.
    When I am going to do this settlement VA88 it is giving messages there is nothing to be settle.
    What I have to do please be advised.
    I did all these activities:
    1)     Create sales Contract
    2)     Create Internal Order
    3)     Assign Internal Order to sales Contract
    4)     Crate Release Sales Order
    5)     Assign Internal Order to Release Sales Order
    6)     Delivery & PGI
    7)     Billing         (at billing time the internal Order should be Updates (pls advise it should be or not)
    8)     Last is Settlement VA88 u2013 this time it is giving Error.
    When I settle the Sales order to internal order what will happens. Which value will update.
    Please reply me frds,
    Thanks,
    Srem.

    hello Lakshmipathi,
    Thanks a lot for your reply.
    I tried to change the requierement class in order to put one with special stock E as you explained, but i still have my weird schedule line. When i put the item in the order it is 0 stock for today, but stock find in 12 days either if there is stock or no(unrestricted stock i mean).
    If i change the RDD in more than 12 days the stock is available for the date requested.
    If you have an idea of what could be wrong because on my case i want the schedule line to be at 0 while the sales order reservation has not been processed (via MB1B/412/E) and once the stock movement is done the schedule line has to be find.
    I dont know if im clear enought..
    To be more clear,  i want the schedule line based on the "sales order stock" and not on the "unrestricted stock".
    thanks for your help!
    Guillaume

  • Sales order stock problem at the time of PGI

    Dear Experts
    When a sales order is being created , the delivery is done.The moment PGI is done the system gives  a error prompt as " sales order stock XXXXX not created for the item YYYY"
    I dont want this to happen.
    I wish that at the time of PGI system should simply and directly pick the qty from the storage location and do the PGI.
    Also we dont have availabilty check at the delivery item ctgy level.
    Expert suggestions are required.

    Hi
    Go to MB1B and enter movement type 412 , special stock E and enter
    then enter sales order no and item no
    enter storage location, material and quantity and save it
    other wise in sales order VA02
    go to procurement tab in the overview screen change requirement type to daily requirement
    you will need not to do the above process
    regards
    vardhan

  • Sales order we have made schedule line category catCN but still reqt coming

    Dear Sir,
    Sub : For sales order 5000060 line 10 we have made schedule line category as CN but still system is giving requirement against this order (while running MRP T code MD50)
    Details:
    One user has made one FG material delivery with PGI without putting the picking quantity. He had put zero picking qty. When we click PGI button System does not allow to do PGI without putting the picking qty but how he could do it we do not know. Now there is no goods issue material document instead one confirmation of service document is there in doc flow .we can not open this document. if we click display by selecting this document in document flow system gives error - NO document created for confirm service/cancel transaction
    All the delivery fields are gray out. Delivery qty is there in this delivery hence at sale order schedule line tab against the schedule line system is showing delivered qty -2.
    Goods movements status is B- partially completed.
    Also system is not allowing to reverse the delivery- it is saying-no data available for this selection criteria. Hence we are not able to do delivery against this item. Hence we have created sale order line item 20 & transferred this stock to line item 20 & did subsequent transactions.
    Now system giving requirement for line item 10 .We have made schedule line category CN still system is giving requirement against delivery number  in T code -MD 50 against sale order line item- there is customer order ,delivery, production order .delivery number never comes in MD50 .it is giving requirement against delivery.
    Kindly let us know how to stop the requirement to generate from this sale order line item
    Also kindly let us know how user could make this & how this might have happened & how to restrict this in future.
    Regards

    Dear Sir,
    When we create a sale order default sch line category is CN after few days (there is a specific reason) we change it to CP & run MRP
    In this case we made the product by doing this but while doing delivery .user did some mistake & did PGI without picking qty in delivery.Now this qty is in delivery but there is no material document that stock has not yet moved .Since there was a problem in the delivery we have trasfered this stock to sale order line item 20.& did further transactions.
    Afte this we did schedule line cat from CP to CN
    But in MD50 system is giving the requirment against sale order ,delivery
    Regards

  • Reg: Sale Order short close at Schedule lines level

    Dear Gurus,
    Requirement is to close all open schedule lines beyond one month.
    In detailed. User Enters Manual Schedule Lines as per the requirement of the customer say for 6 months.
    for Eg . Sale order entered on 1st of august to Dec with 500 qty, schedule 100 qty/Month, manually in sale order.
    Now if business delivers only 90 out of 100. they need to short close that particular schedule line only not the entire sale order or line item. I tried with Delivery block at schedule lines level. but it is not working.
    If any one has come across this scenario please share with me.
    Regards
    Praveen

    If we apply a delivery block the pending qty will automatically add to the last schedule date. Ex. if there is 3 dates in the schedule lines, and there is some 50 qty pending in second date, and if u apply delivery block it will carry forward that pending 50 qty to the third schedule line and adds up with it.
    But in my case i just want to close that pending 50 qty in second line item.
    Regards
    Praveen
    Edited by: Praveen_PG on Sep 15, 2011 1:28 PM

  • My sales order is having two schedule lines

    Hi sap gurus,
    my sales order quantity is 36 pcs.
    the same sales order has two schedule lines in that the material availability date is 05/02/2010 for quantity 22 and for second is 15/02/2010 quantity is for remaining 14 quantities.
    so here delivery can be created for quantity 22 becasue the MAD is on 05/02/2010.  upto here no issues.
    here in my production server user is able to create only one delivery document for total 36 quantity which includes the 14 quantity also for which the MAD is at a far date that is 15/02/2010.
    (2).  i opened the delivery there two picking requests has been generated one on 04/02/2010 & for 07/02/2010.  how it is possible by the system.
    how is it possible for a material which is available in the future date that is 15/02/2010.
    can any help on this.
    regards,
    balaja

    Hi,
    Though the MAD is different, same delivery is possible for the two Schedule lines.
    But for the picking request creation for the future MAD (15/02/2009), please check your sales order. That is, go to VA02, and in to the schedule line level and then to the Shipping button and look for the various dates...
    Regards

  • Different Method to valuate sales order stock

    Dear expert,
         I came across a problem and I need your help:
         Scenario: Make-To-Order production without sales order controlling.  Uses standard price in material master record.
         As we know, There are a predefined sequence to valuate sales order stock: First, The system uses the standard price on the basis of your customer exit COPCP002 Material valuation for valuated sales order stock. If not defined COPCP002, Then, the system uses sales order costing.  Then, the system determines the standard price using the production order cost estimate. At the end,  the system determines that If you manufacture a material both for the make-to-stock-inventory and for the valuated sales order stock, the system reads the material master record of the collective requirements material.
         In SAP online Help, there is a note that: If you calculate the standard price of sales order stock in a preliminary cost estimate for the manufacturing order or use the price in the material master record, you cannot transfer cost component splits into COPA. This is my doubt: I don't know exactly where are the differences between sales orde costing and standard price in material mater to determine sales order stock.
         So, I have a question:  What are the extract diffences between using sale order cost estimate and the standard price in the material master record to determine valuated sales order stock?
         Thanks for your help.  Best regards,

    What you said is exactly what I want! Very thankful for your help.
    Yes, I have found that in EBEW table that standard price is valuated with preliminary cost estimate because I don't give a sales order cost estimate but I give an sales order stock in the customizing - requirement class. So, I have this question that how the sales order stock is determined.
    In COPA customizing (COprofitability analysismaster datavaluationSet up valuation using material cost estimate), standard cost estimate or sales order cost estimate can be transferred into COPA value fields in our system.
    But, I have still have a question: I found in our system, preliminary cost estimate in the linked production order is determined for valuation of sales order stock in EBEW table. As sap online help says, cost component splits can not be transferred to COPA.
    So, according to SAP online help, I think what you said u201Cu2026..However , when we start thinking about the result of this cost to flow into COPA , this cannot happen as the Inventory was valued with a Preliminary csot estimate. So , the Online help says that it will not be able to transfer Result of Preliminary cost estimate into COPA for transferrring COGS details. System would always require a Standard cost estimate or a Sales order Cost estimate to flow Cost details into COPAu201D is correct.
    But, in our system, cost component can be transferred into COPA!? When I create a sales billing (invoice) with tcode VF01, it can create a profitability analysis document (shown in VF03) which it had a cost component split for that material in the sales order stock valuated with the preliminary cost estimate. Or where is stored for the Make-to-Order materialu2019s cost component split in COPA?
    That is the real point that confused me. Hope you can help me. Thanks very much.

  • Sales Order Items align with Truck quantity

    Hello Gurus,
    We are in the design phase and there is a requirement from the client that
    The Sales Order can be with multiple line items. But every line item weight would be equal to a truck weight/capacity. The rest of the items needs to be rejected.
    Example: If 1st line item weighs 10tons and has 20 pallets, and the truck can load only 19 pallets bcoz of weight, then we should be able to reject the 20th item.
    How do we do this ?
    rgds..Ameet

    Hi
    Before going to any solution  I would like to known some open question below..
    1 Take an example that you have some container  whose size may be big but the weight may be lessu2026.
    2. In the above scenario it looks that you wonu2019t have place to load material in the truck as you have not over loaded.., what will be the action on that case
    Assuming that youu2019re  not considering any the size of the material and concentrating the weight of the material (which may be not much real scenario)
    Create a custom table say named by u201CZ_Truck_ capacityu201D which  you can define by any place in the sales order (may be by some PO type). But I would prefer to say that you maintain the custom table with respective to the Shipping Condition and the Truck capacity.
    So in MV45AFZZ in VBAP section you can write the logic that
    u201CIf the SC is u2019 10u2019  then go and check the table u201CZ_Truck_ capacityu201D to know the capacity of the vehicle .
    If the capacity is >= the total weight of all the item (I think the weight can be get from MVKE or MARA or may be some MM table, please have a look for this) then allow the sales order or give an error or massage as per the business requirement.
    Hope that may help you some how

  • Problem with PGI - Sales Order stock does not exist

    Hi
    I created order 58161 with 1 item line (10).
    Did a delivery and created a Picking Request (which i released via transaction VL08).
    When i try to do PGI i get following message:
    Sales order stock 58161 000010 does not exist.
    I have previously done a similar order with same material and so on and it went through the system without a hitch.
    I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
    Thx
    RM

    Hi,
    first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

  • Transfer Posting problem with "sales order stock type" status

    Hello, i have this problem, i spend 2 days looking in the forum, but
    nothing, the question is:
    The SD users sell an item, and the item get the status of "sales order
    stock type" in the MMBE, but at the same time, the MM user made a
    trasfer posting in two steps, he take out material with transaction
    MIGO, mvt 351, to another plant, but the materail was already
    compromised with SD; now he cant sell the items, because he dont
    realize that the material was in sales order stock type, and he already
    transfer it to another plant. how can i block this? if a material in
    MMBE is with "sales order stock type" status, he CANT transfer it with
    351 mvt type, what config i have to make?  thanks a lot!!!!
    now the quantity of the unrestict use
    stock is lower than the sales order, we dont want to have this issue,
    thanks again
    Edited by: Alex Arti on Aug 6, 2008 7:14 PM
    Edited by: Alex Arti on Aug 6, 2008 7:16 PM

    Hi!
    Have you recently upgraded to EHP4? In this case, please, check the note 1441195. This note should solve the issue that you are reporting.
    I hope this helps,
    Esther.

  • Reason for rejection for sale order stock existing line item

    Hi,
        I am giving reason for rejection for a line item where there is already sale order stock. Then I am getting a warning message like " there is sale order stock assigned". I want this message to be as error message. Any customisation (SPRO) is there for this?
    Kindly update.
    Ratna

    Dear Rama Rao
    I think, there is no problem you can ignore the warning message and go ahead give reason of rejection and close the order
    There wont be any problem absolutely
    The reason  of warning message is, (it is sales order created with item category with special stock indicator as E )  that means the system tells you that it is extra special stock which you have created and now you are trying to reject hence it alerts you by giving a warning  message
    The item category of the items which you are trying to reject  is marked  or should have been marked with special stock indicator (you can check that in VOV7)
    By double clicking warning message if it is of V4 message class in t code OVAH you can make that as no message
    But i doubt that this is available in OVAH
    Regards
    Raja

  • Third party process with Valuated sales order stock

    Hi All,
    We have third party sales order process with valuated sales order stock. The problem is that in the theird party PR which is triggered directly from the sales order it determines a stock account which is assigned to the BSX key in OBYC.
    But since this is third party processing as per my understanding a consumption account assigned to key GBB-VAX (since account assignmnt category is X) should get determined, so that when the GR is done against the PO a consumption posting is done in the background.
    I am not able to understand if the system is determining the stock account due to the fact that it is valuated sales order stock and if so, what should happen after GR. Should we have a stock created for the material which is physically directly delivered to the customer?
    Regards,
    V S

    Hi,
    Check GBB-VKA which is defined in OME9 for your ''E'' Account Assignment Category that SAP will debit upon GR posting
    Also check "X" GBB-VAX and the G/L account assignment in OBYC
    The posting on GR should be debit KBS -Credit GR-IR
    Thanks
    Diwakar

  • Goods valuation with sale order stock

    use S price valuation material, goods have production order ,with sale order stock, when the produciton order have GR, the goods stock value do not use standard price for material accounting view,why ? what problem? use standard price valuation sale order stock is standard program for the SAP system ? this is very touchy problem.

    make sure that for the final product manufactured in accounting view u have maintinaed the price contrlo indicator as S
    and if still error comes then let me know system would be showing the  actual cost and planeed cost
    if there is variance then system is goingto post that to the cost difference account

  • Problem about sales order stock stock transfer and batch determination

    Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
      In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found  that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
      Can anybody help me? Is there anything else I need to do? Thanks very much.

    I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted  from SAP.

  • External Procurement with a Valuated Sales Order Stock

    Hi Experts,
    I read the following in SAP Help,
    For external procurement with a Valuated Sales Order Stock, system generates a purchase requisition from the sales order.
    If you are using a valuated sales order stock, the externally procured material is assigned to inventory at the time of the goods receipt. If the sales order item is flagged as carrying costs and revenues, then when the goods issue for delivery to the customer takes place, the sales order item is debited with the costs of the externally procured material.
    My question is - it says costs of external procurement is debited to sales order item when " goods issue for delivery to the customer takes place"
           - but in my case, when I made the GR for purchase order (created automatically by sales order), system directly posted the procurement cost as actual costs to the sales order item. There is no delivery for sales order done still.
    So actually, when should the external procurement cost be debited to sales order item -- when GR for purchase order is done (or) when  goods issue for delivery to the customer takes place?
    Thanks,
    GAN

    Hi Rafi,
    Thanks for your reply. I understand the problem now.
    Material which comes from prod order is posted statistically (value type 11) to sales order when GR for prod order is done.
    Here, the issue is about a GR for purchase order (assigned to sales order). This material purchased is not used in any production process. Its a material which is supplied to customer along with main material produced in house.
    In purchase order, I have given the consumption account (which is cost element 1). Entry was Consumption Dr and GR/IR Cr. So, this posted as actual cost to sales order.
    I should have given inventory account in purchase order (with cost element 90).
    Its a mistake of using consumption account in purchase order.
    Thanks.
    GAN.

Maybe you are looking for