Sales Order Text not getting copied after configed with tcode VOTNX

Hi All ,
We have configed one of sales order texts to be copied from customer master text at sales org level .
It works fine for some sales org , But for some it does not and says "Text could not be structured " in log .
I tried to debug while creating sales order , But unable to reach the point where the texts are copied .
Any help would be appriciated .
Thanks
Vinay

Wanted to add more thing ,
The log Says that the error is recogized by the sapscript FM INIT_TEXT.
Thanks
Vinay kolla

Similar Messages

The pricing procedure in Sales order is not getting copied into invoice

The pricing procedure in Sales order is not getting copied into invoice.
I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

Hi
Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
Regards
Srinath

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Test maintain in sales order header not getting copied to delivery

Dear All,
I have maintained the text in sales order header.Initially system was copying the the text to delivery header but now it is not copying.I have not changed any setting.Please guide what could be the reason.
Regards,
Deepti

Hi,
Check the language texts, ie: perhaps the language of SO is EN because the language of customer is EN but the language of delivery is DE, and in VOTXN you have a flag for language with wrong option.
I hope this helps you
Regards,
Eduardo

Item text not getting copied into sales order from inbound Idoc

Hi All,
I have a scenario where in we get the sales order created through a inbound 850 idoc .
The trading partner sends the sales order information which gets through GENTRAN and gets posted as inbound idoc in SAP .
The problem here is that ,there are segments with values for item text in the idoc ,but the item text is not getting carried over to the sales order which is getting created because of this idoc.
There is no problem with the header text and it is present both at the idoc as well as the sales order level.
I have checked the configuration for text determination and everything looks fine .
Please let me know has anyone come across a scenario like this .This is important as our EDI is getting failed when an outbound 810 is sent from SAP for the simple reason that there is no item text .
Thanks
Sridhar

Hello Sridhar
Do you have access to the genuine 850 EDI message? Does it contain the item texts? If so then there is probably a problem with the (XSLT) mapping EDI 850 -> ORDERS.ORDERS05 IDoc.
Are you able to test the mapping independent of the EDI transmission? This way you could nail down the problem.
Regards
Uwe

Sales order Text need to copy in to PR or PO

Hi All
I am trying to copy Sales orde header text and item text in to Purshase Requisition or Purchase order. I have configured settings in VOTXN. But still i am unable to copy sale order text in to PR or PO. plz help on these. (this is Third party scenario i am copying text.)

Hi,
You can use the functuion READ_TEXT to read the SO Text.
Then refer to function SAVE_TEXT, you need to fill the structure THEAD with all PO Values and the fill lines directly.
The text will be updated.

Sales order qty not confirmed when delivery done with partial qty

Hi Guru's
Need your help............
We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order.
I checked all configurations regarding availability check but could not found.
Example:
Sales order line item qty: 4 - 2 qty confirmed (delivered).
For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
plz help me to fix this issue?
regards
sai

Hi,
Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
Regards
Gavin

Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

Hi,
   Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
   What could be the reason ?
   Pls help.
Regrds,
Binayak
Message was edited by:
        Binayak Ghosh
Message was edited by:
        Binayak Ghosh

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Sales order should not get saved without entering the material

Sales order is getting saved without entering the material. How to make material entry mandatory in sales order.. so that if i try to save the sales order without entering the material the system should create an error.
Please give a clue, if there is any way other than incompletion log.

Dear DV,
T. Code: SHD0
Create a Screen Variant for Transaction VA01
and maintain Field: Material as "Mandatory".
Best Reagrds,
Amit
Note: Following is the explaination with Incompletion-Procedure -
T. Code: OVA2 - Incompletion Log
Select Group: B - Sales Order Item; and Double Click "Procedures" (left-hand Dialog-Structure)
Select InCompletion Procedure: 20 - Standard; and double click "Fields" (left-hand Dialog-Structure)
Here, Maintain entry:
Table: VBAP
Field: MATNR
Screen: PKAU
Status: 4
Imp.: Create Z-Incompletion Procedure and make necessary changes, instead of changing a Standard one.
Alternatively, check with Arijeet's post in following thread:
How to restrict saving of a sales order without a material.

Sale order status not getting completed

Hi Friends,
I had sales order with milestone billing for which I completed billing, even though sale order status is showing as being processed. The same way with periodic billing also.
Kindly suggest.
Kumar

Dear all,
I have cleared my actual issue. But the below doubt was regarding the standard SAP.
Hi All,
Thank you for your answers. First point is that I hope completion rule is only for quotation and contracts but not for normal sales orders. Second point is that I am using TAO item category which tells order related billing with billing plan. This means there was no delivery, then why schedule line CP (MRP) was assigned to TAO in standard? This is the problem for me. As the schedule line is MRP the system is not completing the status of the sale order even I have completed total quantity and value also. Can anyone tell me why this was assigned like this in statandard?
Kumar

Terms of payment in CRM order is not getting copied to the Accout

Hi Experts
The terms of payment which has been selected inthe CRM order under the billing tab is appearing up to the invoice created in CRM . But the same terms of payment is not appearing inthe accounting documents generated in ECC.
Can any one suggest how the configuration done or how to do the setting for the same in ECC or at CRM
Regards
Rajesh
Edited by: Rajesh s on Feb 10, 2009 12:55 AM

Hi,
You need to check in ECC if the customer master has the payment terms maitained or not. This could be the reason for the payment terms not being populated into the ECC billing documents.
hope this helps
Shiloo

VAT /CST% manually in the sales order,not getting copied to the Invoice

Dear Friends,
If I change the VAT /CST% manually in the sales order,its not getting copied to the Invoice
Thanks
Ivy

Dear Friends,
Thanks for your valuable inputs....
I have maintained the condition record for the combination of delivery plant region and the customer region.......assigned dummy tax code against the Tax condition...therefore I think there wont be any problem in posting billing doc to accounting doc.
There are different combinations,where sometimes the user is liable for 2% CST ....sometimes 4%CST... but I am able to pick one tax value say 12.5% CST across and maintained the tax condition types - manual entry has priority, as allowed the user to change the value manullay as per the user requirement ....
Now if i change the Tax condition value in the sales order ,the same is not reflecting in the Invoice....this also is applying from contract to a sales order...
Please advice me accordingly...
Thanks
Ivy

BOM main item not getting copied in delivery

Hi SAP experts
The problem iam facing is the main item in sales order is not getting copied in delivery and subsequently not able to generate the billing document as the subitems are not relevant for billing. I got a solution saying that the problem is with the delivery group in the item category.
But for the same item i tried to create order for a different order type and it seems to be working fine. Its happening for a particular order type only.
I checked in the copy control settings and settings seems to be fine.
Can somebody help me on this issue.

Hi,
In VTLA, check copying requirements.
Regards
SD

Sales order does not consumpt Independent requirement

Hi Gurus,
My material is as below:
MRP Type: M0
Stategy group:40      Planning with final assembly
Consumption mode :2 Backward and forward consumption
My independent Req is 'VSF Planning with final assembly'
My sales order item category is 'Zwac', rety is using ZWAC-M0-KSV 'Sales order with consumption'
but before i create sales order:
MRP element Received/Requirement quantity
stock
IndReq              100-
After that:
MRP element Received/Requirement quantity
stock
IndReq              100-
Sales order        90-
but i expected like this:
MRP element Received/Requirement quantity
stock
IndReq              10-
Sales order        90-
Do you know what i did wrong , thank you!
Regards,
dragsky

Dear,
If you have planning stategy 40 , then PIR qty will be consumed duirng MRP run if both PIR created with VSF and you have incomming Sales Order qty .Let say you have 100 pc PIR and also 150 pc of sales order , run MRP-MD03 , it will create 150 pc Planned order or PR .
If your using and Sales Order is not getting consumed upon while running MRP , then couple of checks in this case :
1.Is your PIR (created in MD61) "VSF"?
The requirement type should be KSV to consume with VSF. Please check OVZI to check why your item category in Sales Order get the requirement type 041.
Here you must have following set up :
Requirement Class : 041 , Availablity , Requirement Check box Marked and Allocation Indicator-1 .This Alocation indicator basically Controls the consumption of customer requirements with planned independent requirements whereby the customer requirements type is only allocated one consumption strategy.If it blank that means no consumption with customer requirement .
Please check If you want req. type 041 to consume with VSF, then you have the change the configuration of planning strategy. Use path Production -> Production Planning -> Demand Management -> Planned Independent Requirements -> Planning Strategy -> Define Strategy.
2. What is the schedule line category in your SO ?? Is it "CP"? You are using customised item categoery zWAC which may be inharited from WAC-Order /Delivery Requirement (OVZI)
Check and come back.Hope this will address the issue
regards
JH

Sales text is not getting copied

hi all,
while creating a sales order with ref. to sales inquiry, the sales text
is not geting copied in domestic order, where as in export sale the same material is coping the text from inq to sorder.
Regards ,
siddu

go to VTAA (copy cotl from sales doc to sales doc)
and c if copy cotl is maintained from your inquiry document type to oder type. if it is maintained and text determination is okay, the text would get copied.
-prashant

Sales Order Text not getting copied after configed with tcode VOTNX

Similar Messages

Maybe you are looking for