Sales Order through DTW with Approval
Dear All,
Had any one uploaded Sales Order through DTW with Approval"
Regard,
Divya Singh
Dear Divya Singh,
I don't think that is logical to DTW document with approval. You probably better to DTW drafts and then going through approval procedure.
Thanks,
Gordon
Similar Messages
-
Import of Sales Order through DTW
Dear All
I am having problems in importing Sales Orders through DTW. I have used the template 'oOrders' and enter the required data in the 'Document' and 'Document-Lines' files.
When, I run the DTW and uploaded the Sales Orders, it was imported successfully. But when I search in SBO, no Sales Order was created.
I have also, unchecked the box 'Test Run', but still it doesnot posted any Sales Order.
Kindly, help me in this regards
Thanks and Best Regards
NabeelDear Gordon
Thanks for your prompt response.
In the 'Documents' template, I filled the following columns:
RecordKey CardCode DocDate DocDueDate
1 AAJ-KAC-6 20081203 20081203
In the 'Documents-Lines' template, I filled following columns:
RecordKey ItemCode DocDate DocDueDate Price Quantity Tax Code
1 701-0020-0000 20081203 20081203 10 10 X0
I, also tried to post the Sales Order manually by entering the above data and SO was posted. But it is not posting through DTW.
Thanks and Best Regards
Nabeel -
Uploading Purchase Order Against the Sales Order through DTW
Hi Experts,
I searched the forum but could not see anything regarding this.
Can I upload Purchase Orders against the Sales Orders using DTW upload facility? Manually we do it through the Logistics Tab in Sales Order.
Thank you in advance.
Kind Regards,
ICHi,
You can use the BaseType, BaseEntry and BaseLine columns for this in the row level template (DLN1):
BaseType: it's the Object Type of base document (ORDR.ObjType) which is '17' in case of Sales Order
BaseEntry: it's the Document Entry of the base document (ORDR.DocEntry)
BaseLine: it's the row number of the line in the base document (RDR1.LineNum)
If you import your Delivery Notes with this info, the link to the Sales Order will be updated just as if you used Copy To in SAP.
Regards,
Nat -
Closing Sales Order through DTW
I want to close Sales Order using DTW, because the are a lot of open sales orders and is to much work to do it manually. I would do a query to the SBO DB to get the fields into the template. What fields would be needed to do it???
hector,
good question.
You can raise a ticket to
SAP in service market
place before procedding
further with closing of
sales order.
Hope it will solve the
problem.
Jeyakanthan -
Importing Sales Orders through DTW
Hi,
I´m trying to imports Orders through DTW, I wonder if it is possible to define de the Base Document, in this case the Sales Quotations
Thanks in AdvancedAridane,
The DTW uses the Documents object, as well as Document Lines, etc., and the properties exposed in this object. If the "Base Document" property is exposed per the Documents object in the SDK Help Center, then yes you should be able to import it. The property of BaseEntry is exposed via the Document_Lines object. This is equivalent to the the BaseEntry in the DTW template Document_Lines.csv.
HTH,
Eddy -
Importing of Open sale order through DTW
Hi Experts,
Please explain how to upload open sale quotation,sale order,delivery,A/R Invoice.And what are the templates names for this.
Regards'
silpaHi Silpa n,
try to search the steps how to upload the open documents in the help file of DTW template. Here is the definition of the template and how to have it:
User-Defined Templates
Data Transfer Workbench provides users with default templates for all the objects in SAP Business One, which do not include user-defined fields. This release supports the import of user-defined fields for all the user-defined fields supported by SAP Business One DI API.
Use
As of Release 2005, SAP Business One Data Transfer Workbench allows the users to generate Microsoft Excel templates as the new interfaces.
There are situations where the user may need properties of the interface that are not provided by our templates. For example, in the case of User Defined Fields, the user can go to the Interface Maintenance tool to add the desired fields.
The user may also want to reduce the fields in the templates or rearrange the sequence of the fields. Interface Maintenance tool also allows users to remove unnecessary fields and rearrange them in the desired order.
After maintaining the interfaces, the user could generate new templates based on the new interfaces.
Procedure
1. To use the Interface Maintenance Tool, you need to first go to the menu bar and select Advanced à Maintain Interface to open the Maintain Interface window.
2. In the left frame, there is a drop-down list of all the business objects that are supported by the DTW. Each object contains one or more structures. For example, oChartofAccounts has one structure and oBusinessPartners has seven structures. To add or delete fields from these structures, right-click on a field and select Add Field or Delete Field. If you select Add Field, a list of fields will appear on the right frame. Double-click on a field from the list to add. Before it is added, the application will check if there is duplication. You can only add the fields that appear on the list.
3. To create a new template based on the new interface, right-click on a structure and choose Create Template for the Structure.
To view the existing templates that are provided with the installation, go to Start à Programs à SAP Business One à Data Migration à Templates
Rgds, -
Importing sales order throgh DTW
hi,
i have imported sales order through DTW.there was no error and it came as imported successfully.but 0 objects were imported.can any help me
with regards
priyahi all,
i had an another doubt in DTW.the customer code is in numeric(for example 001).when i enter this number it takes as 1 in that cardcode field(in csv file).while importing it displays the error as invalid BP code.whether the cardcode should be in alphanumeric ?
regards,
priya -
Dear All,
We are creating credit memos against QM notification (type q1) and it is working also.
The requirement is that through VA01 t code either credit note sales doc type
should not allow or without notification no sales order should not save.
To handle this I have added VBAK-QMNUM in incompletion procedure for credit note sales doc type and it
is also working. But while creating sale order through QM02 order it is showing incomplete for
notification no but in sales tab field of notification is not showing.
As per logic if I create sale order through QM02 notification no should should copy but it
is not working. plz advice what can I do.
regards,
sp shuklaDear Divya Singh,
I don't think that is logical to DTW document with approval. You probably better to DTW drafts and then going through approval procedure.
Thanks,
Gordon -
To update the status of the Sale Order through Pl/sql(backend)
Hi folks.
May I how to alter the status of Sale Order from 'Entered' to 'Awaiting for Approval' when the sale order was booked.After approval only it needs to change into 'BOOKED'.
Requirement Scenaria as follows:
Activity Status
1) Sale Order Creation Entered
2) Booking the Sale Order Awaiting For Approval
3) After Approved 'Booked'
or
4) After Rejected Rejected --- should not be available for pick and ship.
Please tell me the solution to alter the status and I had already tried both normal update statement and update through sale order API.Both didnt work.
kindly find me an appropriate solution
Note:I had already altered the OE order header workflow to go for approval when Sale order booked
Thanks in advanceApparently, your Sales Order Type has Approval Workflow associated. Have the approver approve it from the Notifications window. Alternatively have a script to approve the workflow with userid as the approver's, in order for approval and booking.
In case of forced Booking, use OE_ORDER_PUB.PROCESS_ORDER API to pass the Order Details along with BOOKED_FLAG='Y' and FLOW_STATUS_CODE='BOOKED'.
let me know,
Dip -
Removing of billing block in Sale Order through workflow
Hi all,
I want to remove the billing block in sale order when the person approves suing user decision step in workflow .
ANy idea would be great ...
Regards,
VenkiHi Surjith,
task is not for the billing process ....
and here my big problem is that i was unable to call the custom method in worklofw ....
So attachment is not working in workflow only it works while testing if i pas the key value .
Here my requirment is to remove the billing block if the person approve in decision step ...
Deepa,
Can u tell me how to call a custom method here i am using standard BUS2032 in my task.
already i have BO with custom method but i dont know how to call it when the transaction get executed ....
Thank u for ur reples...
Regards,
venki -
Creation of Sales orders through EDI
Hello,
We have a problem when creating sales orders through EDI.
We are getting IDOCs with a delay of 1 second.Before
creating sales orders through the posting function
module IDOC_INPUT_ORDERS, we need to validate for
reference Purchase order number in the IDOC. If there is
any sales order in the database with the Purchase order
number in the current IDOC that sales order should be
blocked.
We already put a validation in the User-Exit of the
posting function module. Because of the frequency of
IDOCs we receive, this validation is getting failed.
Can anybody tell me, how to process only 1 IDOC at any
given point of time before the Posting process.
Thanks,
Madhusudan.Hi Sanjeev,
Thank you very much for helping me out in this problem.Still I haven't got the solution.
I tested the above mentioned configuration option by putting the Check Purchase Order Number field to 'A' in the transaction VOV8. But while creating sales orders, it is giving only information message. Is there any other way, to restrict the Duplicate PO value through configuration setup.
can you also explain how to use Enqueue and Dequeue FMs in the inbound posting function module.
Regards,
Madhusudan.
Message was edited by: Madhusudan Budati
Message was edited by: Madhusudan Budati -
Dates fields issue in the sales orders through IDOC
Hi all,
I'm trying to create a sales order through Inbound IDOC using IDOC_INPUT_ORDERS.
I have 2 custom fields in the sales order which are date fields.
I'm populating them from the IDOC segments(using E1EDKT1-tdid, E1EDKT2-tdline) in the user-exit just before the call trasacation statement. These dates are not coming for a few orders... but are getting populated normally for few of them.
But the tricky part is that... if I process the same IDOC for the second time.. the order created is having the dates.
My issue is that.. i need all the orders to be populated with the dates which IDOC have.
Could anyone please help me with this issue.
All the answers/replies are highly appreciated!!
Thanks for you help!hi,
the following may be of help
There are 2 major exceptions to the batch input internal table. All text data from the segments E1EDKT1/2 and E1EDPT1/2 are not part of the batch input session. Text elements from these segments are posted directly to the data base AFTER the sales order has been created (please note: in order that item texts are posted correctly to the sales order the field POSEX from segment E1EDP01 MUST be transmitted). Also, configurable material information from the IDOC is exported to a global memory and therefore will not be part of the batch input session. Configurable material data is performed in Form CHECK_CONFIGURATION and the data is exported to global memory in the following code:
Exportiert IDOC Daten ins globale Memory
export IDOC data to global memory
call function 'CUXC_IDOC_TO_MEMORY'
tables
cfg_instref = xe1curef
cfg_ref = xe1cucfg
inst = xe1cuins
part_of = xe1cuprt
value = xe1cuval
exceptions
error = 1
others = 2.
One extra piece of useful infomartion if you wish to debug the process is to set your breakpoints at the following points
for Function module IDOC_INPUT_ORDERS
include LVEDAF0F..
CALL TRANSACTION 'VA01' USING bdcdata
MODE input_method
UPDATE 'S'
MESSAGES INTO xbdcmsgcoll.
Now input_method is A foreground process and N for background processing but try changing it to P (pass through mode)
If you have breakpoints in va01, e.g. MV45AF0B_BELEG_SICHERN,(the part where the sales document is saved)
they will be hit, e.g
perform userexit_save_document_prepare.
perform userexit_save_document.
Lastly, don't forget using program SDJEDI , see note 380603 for more information on this
Hope this is useful
Paul Quinn -
Creation of Sales Order through EDI
Hi
Can anybody explain in detail the configuration steps involved in creating the sales order through EDI. If possible with screen shots.
Points will be rewarded.
Thanking you
chanHi Hari & Siva,
Could you please send the document to my mail id
[email protected]
Thanks in advance
MMVD -
Price is not being updated when creating a sales order using DTW oOrders
Hello experts,
When I create a sales Order using DTW (oOrders), the information in the input files document.csv and document_lines.csv is updated with no problem, except the price. The price is being ignored from the input files.
Is there something that I must considered when trying to update the price of a sales order using the DTW?
The field "price" was mapped in the source and target fields in DTW.
Here is the document_lines.csv
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
1,1,_SYS00000000059, ,30PA08-0360-25,1,11.2,3,20110702,V08,A5
1,2,_SYS00000000059, ,30PA08-0707-25,1,15.2,3,20110702,V08,A5
1,3,_SYS00000000059, ,30PA08-0707-22,1,18.3,3,20110702,V08,A5
And the document.csv:
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
1, ,c-6167,20110702,20110702,2
Thank you for your help
Jorge ManzoHi,
Try to re-create your dtw using my template,and use text tab when saving your template.
SO-Header
RecordKey CardCode CardName Comments DocDate DocDueDate DocNum
RecordKey CardCode CardName Comments DocDate DocDueDate DocNum
1 24-25 MANUFACTU 24-25 MANUFACTURING 4/5/2010 4/15/2010 11142
SO-LINE
RecordKey linenum itemcode qty uom PriceAfterVAT Price SalesPersonCode
RecordKey linenum itemcode qty uom PriceAfterVAT Price SalesPersonCode
1 0 SHAFT HEX 7/8" 1 pc 4536 4050 CRIS
Note : Line -(LINE NUM and QTY is important upon computation of Price if SO is ITEM TYPE Document.
hope this will help you!
Regards,
Darius -
Link of vendor in sales order through WBS element
Hi
My sales order line items are having WBS assigned.All these line items are direct bought out items from vendors and supplied to customer.
Please suggest me link of vendor in sales order through WBS element.
I want to use the same logic for billing split criteria for individual line items(hence for individual vendors) Presently my client is getting common invoice for all line items but they want separate invoice for each line items.
Awaiting for your valuable inputs
Thanks
ManojHi Manoj,
I need to understand your process in more detail.
How do you procure? Create a sales order with TAS item category to create a PReq and PO?
Very simple explanation: Resource Related billing/DIP profiles are used to accumulate costs on WBS elements and then bill the client as needed.
Maybe you are looking for
-
Garageband will not recognize itunes upgrade.
Hi, I am not sure what happened in the few weeks of not using garageband, however, I opened it today and found that itunes will not load. I get this "open itunes 6 or later to populate this list". I am finding the same message in imovie as well. I co
-
What should i do if my ipod doesn't light up after pressing the main button on the front?
What should i do if my ipod touch doesn't light up after pressing the main button on the front of the screen? and also what should i do if i am unable to connect my ipod too the internet over wi-fi?
-
How do I change the google search engine results from TEMPLATE (I used a template to create site) to the actual name of my site? Help please...
-
Install sap through copy /datafile and oracle binaries
Dear Experts we have an requirement would like to make an test system without installing sap software but only through copying oracle datafiles and oracle binaries on windows 2003 we have just windows 2008 os on c:\ with 100 gb
-
Updated to the newest IOS yesterday, now my iMac won't load up.
Finally got around to updating to the newest OS yesterday. Rebooted yesterday to complete installation and computer worked fine. This morning, when I boot up,it only gets to the grey screen with the apple and stays there. HELP....this is a busines