SALES ORDER TIME

Hi All,
where can we see the time at which the sales order is created.
(Date can be seen at header of sales order in sales tab.)
Points will rewarded.
Regards

Dear Mrunal,
--> You can the time of the order creation through VA05.
-->Go to VA05 transaction give the data in the selection screen then execute system will give the list of sales orders in that you can find the time at the extreme right.
I hope it will help you
Regards,
Murali.

Similar Messages

  • Sales order getting maximum doc value exceeds but not blocking.

    Hi Experts,
    My client using automatic credit control .
    And for one risk category we have activated max doc value and sen the value is -0.01. It means even though for the free of charge sales orders also should be block.
    I have created a sales order with free of charge item with value of 0.00 after getting warning message and it is blocking.
    And i have one scenario for service items , where am creating sales order with value of 0.00 for the service items and while saving the sale order getting warning message and it is not blocking.
    Why this sales order is not showing in vkm1 event though if i get warning message while saving the sales order time.
    Please any body help out form this issue
    Regards
    Venkat

    Hi
    That i already setup and maximum doc.value i have set there -0.01.
    The same functionality is working for diffrent sales document type,but it is not working for this service sales document processing.
    Is there any scenario like if there is no delivery further process it should not block
    Please revert immediately if any body knows
    Regards
    Venkat
    Edited by: venkat s on Jun 8, 2009 1:28 PM

  • Sales order creation, standard event trigger is taking long time .

    We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
    We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
    Regards,
    Sushee Joshi

    HI,
    we have written SWE_EVENT_CREATE in update task
    I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
    OR
    And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
    Please check..
    Regards
    Pavan

  • Sales order report for on time and in full.

    Dear All,
    Is there any existing report or does anyone have a report that allows a person to measure if the items on a sales order was delivered in full and on the required delivery date?
    Regards,
    Ottley

    Dear Ottley,
    I think, Your requirement would get satisfied by Report: VL06O
    Click Tab: List of Outbound Deliveries.
    On to next screen, go to each Tab (Sorry, this time my Router-String is Down, so can't assist with exact Filed-Values) and maintain Filtering Criterias, like:
    If, I remember correctly, there is one Tab: Doc. Data; there is a Field: Order (If, you wish to list out Delivery, for selected Sales Orders)
    Another Tab, related to various Dates. Maintain appropriate Field(s), say Actual GI Date & Planned GI Date; and so on so forth...
    Now execute (F8), report.
    From, Selection Criteria, Key-in more Fields as reqd.
    Best Regards,
    Amit

  • Delivery time in sale order

    Dear Sap Gurus,
    I had created a sale order with reference to a quotation.
    In the quotation-there are 2 line items with different delivery time.
    sale order date is 15/2/2008
    for eg line item 1  is 3 days
    line item 2 is 1 week
    the maximum delivery time is for line item 1 is 3 days
    so 15+3=18/2/2008.
    the system allows me to do the delivery,and pgi  even on 29/2/08.
    so the delivery time is not effective here.
    kindly suggest me what is the exact usage of this delivery time in a sales document.
    Points will be rewarded

    The Delivery date in the sales order is the Earliest date proposed by the system after automatic availability checks and delivery scheduling.
    The system uses the delivery date for each schedule line together with predefined time estimates for delivery activities (such as picking and packing) to determine the
    Material availability date
    Loading date
    Goods issue date
    Transportation planning date
    In ur case, ur order contains two item with different delivery dates of 15th and 28th.
    Suppose if u deliver the order on 15th , the delivery split takes and only one item will copied into the delivey.
    But if u deliver the order at 28th, both the items will be copied to the delivery, since both have already confirmed on the date
    Hope u understand...

  • Planned order creation with sale order assingment at the run time of MRP

    some material item not planed with sale order stock in MRP run time. all setting in material master are corrected as i knowing.having some mistake in setting other configuration.

    Planning strategy is Make to order individual collective as individual but still come as make to stock plan orders
    Incase of Header material- Plan order is creating in MTS
    Check the sale order procurement tab, Is The requiremnt type is relevant to your Stratergy?, if not chnage it to correct requiremnt type and rerun MRP again
    Incase of component material- Plan order is creating in MTS
    Check for the component material MRP 4 View, individual/Coll.req- as 1. If not set as 1 and rerun the MRP again

  • Why some times delivery  will created through vl10c even sale order stock is not available?

    Hi,
    why some times delivery  will created through vl10c in batchmode even sale order stock is not available?
    Thanks,
    Kalyan.

    the correct english name is : Replenishment leadtime
    Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

  • Value not populating in the print out (sales order) for the 1st time

    Hi friends,
    While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
    Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
    Please give me some clue on where to check and how to go about fixing this problem.
    Regards,
    Shanu.

    Dear Shanu,
    This issue may be related bug in the output program so take help of ABAPer to fix the issue.
    I hope this will help you,
    Regards,
    Murali.

  • Report to identify sales orders not shipped on time

    Hi
    i have one requirement to identify the sales orders that are not shipped on time(Sales Order due).
    Could you please anyone throws some hints to build a report.
    Thanks in Advance
    Arjun

    You will have to join oe_order_lines_all and mtl_material_transactions.
    The oe_order_lines_all.scheduled_ship_date will give you when the order was supposed to ship.
    The "sales order issue" transaction in the mtl_material_transaction will give you the date on which the sales order issue transaction occurred.
    Alternatively, you can use the dates in wsh_delivery_details and wsh_new_deliveries tables and compare them with scheduled_ship_date.
    Hope this helps
    Sandeep Gandhi
    Independent Techno-functional Consultant

  • Sales orders in TDMS company/time based reduction  are outside the scope

    Guys,
    I have had some issues with TDMS wheras it didn't handle company codes without plants very well. That was fixed by SAP. But I have another problem now. If I do a company code and time based reduction, It doesn't seem to affect my sales orders in VBAK/VBUK as I would have expected. I was hoping it would only copy sales orders across that have a plant which is assigned to a company code that was specified in the company code based reduction scenario. That doesn't seem to be the case.
    VBAK is now about one third of the size of the original table (number of records). But I see no logic behind the reduction. I can clearly see plenty of sales documents that have a time stamp way back from what I specified in my copy procedure and I can see others that have plant entries that should have been excluded from the copy as they do belong to different company codes than the ones I specified.
    I was under the impression that TDMS would sort out the correct sales orders for me but somehow that doesn't seem to be happening. I have to investigate further as to what exactly it did bring across but just by looking at what's in the target system I can see plenty of "wrong" entries in there either with a date outside the scope or with a plant outside the scope.
    I can also see that at least the first 10'000 entries in VBAK in the target system have a valid from and to date of 00.00.0000 which could explain why the time based reduction didn't work?
    Did you have similar experiences with your copies? Do I have to do a more detailed reduction such as specifying tables/fields and values?
    Thanks for any suggestions
    Stefan
    Edited by: Stefan Sinzig on Oct 3, 2011 4:57 AM

    The reduction itself is not based on the date when the order was created but the logic enhances it to invoices and offers, basically the complete update process.
    If you see data that definitely shouldn't be there I'd open an OSS call and let the support check what's wrong.
    Markus

  • Number of times sales order./delivery blocked

    Hi,
    Do we have a report which gives details about number of times sales order/delivery blocked because of credit management.
    Or there is any work around for getting the same?
    I request you to kindly suggest your valuable inputs.
    Regards,
    Phani Prasad.

    Hi Balaji,
    Thanks for your reply.Please find the below example.
    Customer A was blocked for credit limit on 01.01.2011 and subsequently released using VKM3.
    Again the same customer was blocked on 02.01.2011 and once again released.
    How do I know the number of times Customer A was blocked and released for a given period.(2 times in the above example for that period).
    Please explain.
    Regards,
    Phani Prasad.

  • Material Staging time in Schedule Lines (Shipping Tab) of Sales order

    Hi Gurus,
    I would like to know how the time is arrived at, in the Schedule line of a sales order.
    I have maintained the Working times in the Factory Calendar. via Route Dependent with Pick Pack time as 3 Hrs 30 Min.
    and working time in Shipping point is from 08:00 to 20:00 hours.
    When i create a sales order now, i could see that material staging time is determined.
    But now i would like to know, what time should be determined here.
    Thanks in Advance,
    Regards,
    Vasim.

    Hi,'
    The following link
    http://help.sap.com/saphelp_scm70/helpdata/EN/3a/92e217b3f54a5eae7a4ac8a99e5e87/frameset.htm
    details on material staging in GATP.
    Regards,
    Mrinal

  • How to avoid that two or more people alter the same Sales Order same time

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
    I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
    So if someone can give me a direction for a solution I would be very pleased.
    Best regards,
    Tim

    Hi Tim,
    The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
    You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
    You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
    Kind Regards,
    Owen

  • How to remove Sales Order to Own for multiple Batches at a time.

    Dear All,
    We use to scrap FERT materials using Mvt. Type 551 / 555, but before scrapping stocks are being removed from Sales Order using Mov. Type: 411 'E', because Batches are produced against Sales Order under MTO strategy.
    The removing process from Sales Order using T.Code MB1A & Mov. Type: 411 'E' is quite time consuming because in this case only one batch is removed from Sales Order at a time.
    So is there any way by which I can remove multiple Batches at a time from Sales Order.
    Thanks and Best Regards,
    Vivek Kumar

    Hi
    YOu can use transaction MASS with the sales document, sales document item, batch fields.
    create a variant and do the changes
    regards,
    Ramana

  • Run time error while creating a sales order by va01

    hi ,
         while  i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
    error in current abap program "saplv61z"  had to be terminated because it has come across the statement that unfortunately can not be executed.
    kindly solve my problem.
    thanks.

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

Maybe you are looking for