Sales Order (Urgent)!
Hi Gurus,
I have come across with this requirement, which is as follows:
You can create and save a sale order with out having any of the line items in that order.
My requirement is that i should not be able to save the Sales Order if there is not line item in it.
I had explored the possibility of putting material field at incompletion log.But it did not work since with out entering material item category would not determine for incompletion to be active at the item categories.
Kindly suggest me how to go about it......
Hi,
Use userexit USEREXIT_SAVE_DOCUMENT_PREPARE in program MV45AFZZ.
Here you can write the code as if material is not present then show erroe message.
This user exit gets executed just before saving the sales order.
This will surely solve your requirement.
Reward points if useful
Regards,
Amrish Purohit
Similar Messages
-
Availability Checking Rule in Sales Order- Urgent....
Hi Gurus,
I m PP Consultant, I want to know How Checking rule is populated whilr creating Sales Order.
e.g - I am creating sales order for the MTS material then availability checking rule A must be come. & same for MTO I think AE should come.
please revert back soon. Hey Gurus Plz help me out its urgent ticket
thanks & regards, points will be rewarded yaar...
Anant.
Edited by: anant joshi on May 29, 2008 8:17 AM
Edited by: anant joshi on May 29, 2008 11:20 AMAvailibility checking rule populates from the availibilty maitined in your material master.
i.e 01 Daily requirements
02 Individual requirements
If you go to transaction OVZ9
you will see the assignment of checking rule against 01 & 02.
e.g 01 A SD order
01 B SD Delivery
01 AE Make to order Stock
I Think This will clear your doubt.
Reward If useful
Regards
Rasik -
User exit for sales order-Urgent
How Developed a User Exit, which will be triggered when a Sales Order is changed manually. This user exit will check the requested delivery date and update VBKD-BSARK field.
Pls help me how to do it....
Pts will be rewarded.....Hi,
The following exits trigger during VA01 creation:
EXIT_SAPMV45A_002 and
EXIT_SAPMV45A_003
Check this include MV45AFZZ also.
Regards,
Satish -
Delivery & Billing Block at Item level in Sales Order ( Urgent)
HI All,
I am getting delivery & Billing block at item level when I create an order with config material.
And I am unable to remove the blocks manually since they appear in display mode even in change mode of sales order.
but I could see a biiling document for this order in document flow with 0 value.
Note:
1. The item does not have any reason for rejection
2. Ther is no block set at schedule line category too.
Please give me your valid suggestion as soon as possible since it is production issue.
Thanks & RegardsHi Chandra,
Please try with this
Run VKM5 transaction with that delivery
I hope it will help you,
Regards,
Murali. -
Payment Terms in sales order - urgent
Hi all,
while creating a sales order, payment term 'z204' is not appearing in payment terms drop down but this payment term has been defined in SPRO . Also finance ppl has created FD document in vx11n with this payment term.
Kindly tell me that why this payment term is not appearing in sales order.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.Hi,
please check wether you maintained the payment terms in cust master company code and sales area data sections, if you maintain there properly system copies it into the sales order.
please reward the points if its helped you
Ganesh -
System is not blocking Customer at creating Sales order - Urgent
Hello all,
Our user has created a sales order for 1,040,000.00 PKR for advance payment- cheque payment term. There is not payment against customer in fbl5n but system is not blocking sales order.Customer credit limit is zero. Any idea that why this is happening??hi,
we had a similar req we handled it using delivery level blocks and restricted the authorisation to remove the block to certain users. incase you are not doin this follow this path. imglog executionshippingdeliveries-define reasons. assign this block to the order. also you will ahve to put teh block in cust master too.
saurabh -
Delivery lead time in Sales Order--URGENT
Hi SAP GURUS,
How the Delivery lead time works in Sales Order i.e
"From the time a confirmed Sales order is punched till the time we have delivered the material"
How to confgure to use effectivelyWhen you create sales order, system automatically proposes data based on configuration settings.
1. Check the schedule line proposed by system in sales order. Let's say CP. Go to transaction VOV6 and see if availability check is checked.
2. Check the requirement type proposed by system in sales order. Let's say 041. Go to transaction OVZH and see what requirement class has been assigned to it. Let' say 041.
3. Go to transaction OVZG and see if availability check has been checked for this requirement class 041.
4. Check the shipping point proposed by system in sales order.
Go to transaction OVLZ and check Loading time & pick pack time maintained there for this shipping point. If there is nothing let's say we have 24 hours and 24 hours respectively.
5. Check the route proposed by system in sales order. Let's say route selected is 000003. Go to transaction 0VTC and see Transit duration & Transportation lead times maintained there. Let's say timings maintained are 2 days and 1 days respectively.
Now let's say a customer calls and says he wants a material delivered on Apr 25. Now what the system does is that it does backward scheduling. i.e. it goes backward from delivery date i.e. 25th April. It reduces 3 days for transit time, reduces time taken for loading time, reduces days taken for arranging transport, reduces time taken for pick pack. After calculation it arrives at date Apr 21. Now it checks whether material is available on this date i.e. Apr 21.
If material is available, it confirms delivery date.
Otherwise, if material is not available on Apr 21, it determines date on which material is available. Let's say material is available on Apr 23. Now, system immediately carries out forward scheduling. So it starts calculating from Apr 23 and adds time and dates maintained for picking & packing; transportation lead time, loading time and transit time.
Also note that system takes into account factory holidays, factory timings when it is calculating above. If factory works 24 hours and is closed on Saturday & Sunday, system arrives at date Apr 30. It now confirms delivery date as Apr 30 to customer.
I have given a simple example. There are many other aspects you can configure on scheduling. -
Custom field for sales order - Urgent.
Hi all,
I am novice at SD, want to append a custom field to header level tables - VBAK, LIKP, VBRK. for sales order.
- Will append structure work for this requirement ?
- Will this field automatically apears in VA01, VA02, VA03 screen ?
Thanks in Advance.
Regards,
Mohan.Hi,
Implementation Guide.
This is the place where we do the configuaration settings for sap.
This is the place where the core users or super users do the configuration changes if they want after the project is implemented.
Mohan
Award points if it helps -
CO: put a standard price check on sales order (URGENT PLEASE)
Daer Gurus,
I want to put a standard price check on sales order.
Will you please help me?
Thanks in advance,
Best Regards.
Juan
Edited by: juan on Mar 7, 2008 1:01 PMHi,
1. I don't think it is possible to change system design. Better remove this function to avoid waiting time, if not necessary.
2. Not sure about second question.
Thanks & Regards,
Nagarajan -
Product costing by sale order(urgent)
Dear all,
1. Please tell me all the configuration steps to do product costing by sale order.
2. Also please tell me how to test it after configuring.
3. Please explain me the end user part also.
I will award full points.
Thanks & Regards,
A.Anandarajan.Hi,
Product cost by sales order is useful when a finished product is manufactured for a specific customer rather than for the normal make-to-stock inventory. You can use the Product Cost by Sales Order component in the following situations:
When you are manufacturing in-house with reference to a sales order in complex make-to-order production
When you are purchasing customer-specific trading goods with reference to a sales order and reselling them to your customers
When you are providing services whose costs are assigned to a sales order
When you want to collect the sum of the actual costs incurred for the sales order item on the sales order item (standard cost of goods manufactured of sales plus variances) For detailed information, refer to the sections Valuated Sales Order Stock and Settlement in Product Cost by Order or Period. -
Return sales order based on sales order urgent..................
Hi,
I have to create return order for sales order. I am trying to create through bapi BAPI_SALESORDER_CREATEFROMDAT2. But i am getting eroor like "Unpermitted combination of business object BUS2032 and sales doc. category H".
If i create normal sales order it is creating sales order through this bapi.
In my case i have to create return sales order with reference to sales order. If any body is using this kind of sernario please send me with parameters..
Thanks in advance,
praveenHi Praveen,
The BAPI_SALESORDER_CREATEFROMDAT2 is orginally not designed for creating return sales orders.
Way around: create BIM processing or copy FM and remove the check (which is risky, since integrity is no longer guaranteed).
Regards,
Frank Umans -
URGENT: REGARDING SALES ORDER REPORT
HI,
I making a report on sales order in which i have to display the sales order no,date,customer no,date,material issued to customer,date of issue,invoice no,date,quantity,amount of invoice.
can anbody tell what are the tables used for making dis report .
currnetly i am using VBAK,VBAK,VBRP.
PLZZ help me out as it is really urgent to me & help will be deifnately rewarded.
Edited by: ric .s on Feb 19, 2008 11:01 AMHello,
Go through the Diagram on the page hope it will help you.
http://www.erpgenie.com/abap/tables_sd.htm
Thanks,
Gunjan -
Really Urgent: Problem in making link b/w sales order and production order
Hi,
I am trying to make link b/w the sales order delivery(VL03) by taking its Batch Number(LIPS- Delivery table) and linking with AFPO(Production order Table) field (batch no) so that i can see the fruther operations done o dat production order made against sales order,but it is not coming .
I want to have help which allows me to make link b/w delivery (vf03) and the productiona order.
plzz help me out it is really urgent.
Edited by: ric .s on Apr 11, 2008 7:43 AM
Edited by: ric .s on Apr 11, 2008 7:59 AM
Edited by: ric .s on Apr 11, 2008 9:23 AMYou have delivery no(VBELN) & itam no (Posnr)from lips table.
Now
1. go to VBFA table end get the corresponding sales oredr no and order item no.
In VBFA table pass the delivery no in VBELN and delivery item in POSNN and 'J' in VBTYP_N and 'C' in VBTYP_V.
Now VBELV & POSNV will return the sales order no and sales order item.
2. Got to VBAP table and get the corresponding AUFNR to the order no and item no.
3. Now with that AUFNR you will get a connection with AFPO(Production order Table. -
URGENT: REGARDING TABLE FOR SALES ORDER STOCK
Hi,
I making a report in which i have to display the material's minimum ,maximum and reorder point levels and its stock level too.
but 1 problem i am facing is that if the stock is present in the sales order theni have to use the MSKA table but it contains different fields such as :-
1.) Unrestricted stock
2.) Block Stock
3.) Quality stock
I want to know that table which stoers the sum of all the values given above.
plzz help me out how to solve this problem.it is really urgent to me as i have to complete the report right now.Hello,
I think you have to sum up all the values (You can request the requirement from functionals) also you can always cross check with transaction MB52. -
Urgent!!!Need code to fetch all sales order data and download to flat file
urgent!!!Need code to fetch all sales order data and download to flat file
D A T A B A S E T A B L E S *
TABLES: vbak, "Sales Document: Header Data
VBAP, "Sales Document: Item Data
MARA,VAPMA,VBPA,VBLB,VBEP,
VBKD. "Murali Poli .
I N T E R N A L T A B L E S *
Internal table to hold the Delphi material numbers file
DATA: BEGIN OF tbl_matnr OCCURS 0,
matnr LIKE mara-matnr, "Material number
END OF tbl_matnr.
Internal table to hold customer cross ref data
DATA: BEGIN OF TBL_CUST_SA OCCURS 0,
OLD_KUNNR LIKE KNA1-KUNNR, "Old Customer
OLD_VKORG LIKE A004-VKORG, "Old Sales organisation
OLD_VTWEG LIKE A004-VTWEG, "Old Distribution channel
NEW_KUNNR LIKE KNA1-KUNNR, "New Customer
NEW_VKORG LIKE A004-VKORG, "New Sales organisation
NEW_VTWEG LIKE A004-VTWEG, "New Distribution channel
PARVW LIKE VBPA-PARVW , "Partner function
END OF TBL_CUST_SA.
Internal table to check the material numbers of the input file
DATA: tbl_mara LIKE tbl_matnr OCCURS 0 WITH HEADER LINE.
Work area to hold the header record
DATA: BEGIN OF w_sa_header,
recordtype(1), "Record type
schedulingagreement(4), "SA Type
contractreference(10), "Contract Reference
salesorg(4), "Sales Organization
distrchannel(2), "Distribution channel
division(2), "Sales division
PONUMBER(35), "Purchase order number"gsbhondave
soldtoparty(12), "Sold-to party
shiptoparty(12), "Ship-to party
collectivenumber(10), "Collective number
description(40), "Description
roundqty(13), "Rounding Qty
pdsi(4), "PDI
correctiondeliverydate(8), "Correction Delivery Dt
correctionqty(13), "Correction Qty
cumulativereceivedqty(13), "Cumulative Received Qty
forecastdeliveryschedule(17), "Forecast Delivery Schedule
forecastdelscheddate(8), "Forecast Delivery Schedule Dt
jitdeliveryschedule(17), "JIT Delivery Schedule
jitdeliveryscheduledate(8), "JIT Delivery Schedule Dt
materialnumber(18), "Material number
plant(4), "Plant
item_category(4), "Item Category
suppliercode(15), "Supplier code
scac(4), "SCAC
deloc(12), "DELOC
pkg_id(12), "Packaging ID
catno(30), "Ultimate Cust Part
lgort(4), "Storage Location
vstel(4), "Shipping point
Adding fields by Murali Poli
VSBED(2), "Shipping conditions
INCO1(3), "Incoterms (part 1)
INCO2(28), "Incoterms (part 2)
ZECN(1), "Engineering Change Letter
End of Adding fields by Murali Poli
END OF w_sa_header.
Work area to hold the forecast record
DATA: BEGIN OF w_sa_forecast,
recordtype(1), "Record Type
dateformat(1), "Date format
forecastdate(8), "Forecast date
forecastorderqty(13), "Order Qty
END OF w_sa_forecast.
Work area to hold the jit record
DATA: BEGIN OF w_sa_jit,
recordtype(1), "Record Type
dateformat(1), "Date format
jitdate(8), "JIT date
jittime(6), "JIT Time
jitorderqty(13), "Order Qty
END OF w_sa_jit.
Internal table to hold the Extracted data
DATA: BEGIN OF tbl_record OCCURS 0,
record_type,
DATA(400), " changed from 325 to 400
END OF tbl_record.
Internal table to capture the errors
DATA: BEGIN OF tbl_error OCCURS 0,
error_text(135),
END OF tbl_error.
Internal table to hold the records of VBAP_VAPMA
DATA: BEGIN OF tbl_vbap_vapma OCCURS 0,
VBELN LIKE VAPMA-VBELN, "Sales and distribution document number
POSNR LIKE VAPMA-POSNR, "Item number
AUART LIKE VAPMA-AUART, "SA Type
VKORG LIKE VAPMA-VKORG, "Sales Organization
VTWEG LIKE VAPMA-VTWEG, "Distribution channel
SPART LIKE VAPMA-SPART, "Division
KUNNR LIKE VAPMA-KUNNR, "Sold-to
plavo like vbap-plavo, "PDI
MATNR LIKE VAPMA-MATNR, "Material number
WERKS LIKE VAPMA-WERKS, "Plant
TRVOG LIKE VAPMA-TRVOG, "Transaction group
VBTYP LIKE VBAK-VBTYP, "SD document category "Murali Poli
VSBED LIKE VBAK-VSBED, "Shipping conditions "Murali Poli
BSTNK LIKE VBAK-BSTNK, " Purchase order number " gsbhondave
KTEXT LIKE VBAK-KTEXT,
VGBEL LIKE VBAP-VGBEL, "Reference document no
ABLFZ LIKE VBAP-ABLFZ, "Rounding qty
PSTYV LIKE VBAP-PSTYV, "Item category
LGORT LIKE VBAP-LGORT, "Storage location
VSTEL LIKE VBAP-VSTEL, "Shipping point
END OF TBL_VBAP_VAPMA.
DATA: BEGIN OF TBL_VBAP OCCURS 0,
VBELN LIKE VAPMA-VBELN,
POSNR LIKE VAPMA-POSNR,
VGBEL LIKE VBAP-VGBEL,
ABLFZ LIKE VBAP-ABLFZ,
PSTYV LIKE VBAP-PSTYV,
LGORT LIKE VBAP-LGORT,
VSTEL LIKE VBAP-VSTEL,
END OF TBL_VBAP.
Adding by Murali Poli
DATA:BEGIN OF TBL_VBKD OCCURS 0,
VBELN LIKE VBKD-VBELN,
POSNR LIKE VBKD-POSNR,
INCO1 LIKE VBKD-INCO1,
INCO2 LIKE VBKD-INCO2,
END OF TBL_VBKD.
End by Murali Poli
Internal table to hold temporarily the records of VBAP_VAPMA
DATA: tbl_vbap_vapma_temp LIKE tbl_vbap_vapma OCCURS 0 WITH HEADER LINE.
Internal table to hold the records of VBPA
DATA: BEGIN OF tbl_vbpa OCCURS 0,
vbeln LIKE vbpa-vbeln, "Sales and distribution
"document number
posnr LIKE vbpa-posnr, "Item number
parvw LIKE vbpa-parvw, "SP Partner type
kunnr LIKE vbpa-kunnr, "Customer number
lifnr LIKE vbpa-lifnr, "SCAC code "DN3K923909
END OF tbl_vbpa.
Internal table to hold the records of VBLB (Forecast)
DATA: BEGIN OF tbl_vblb_forecast OCCURS 0,
vbeln LIKE vblb-vbeln,
posnr LIKE vblb-posnr,
abart LIKE vblb-abart, "Release type
abefz LIKE vblb-abefz, "Cumulative Quantity
"Received by Customer
labnk LIKE vblb-labnk, "Delivery schedule
abrdt LIKE vblb-abrdt, "Deivery date
gjkun LIKE vblb-gjkun, "Current fiscal year
vjkun LIKE vblb-vjkun, "Previous fiscal year
END OF tbl_vblb_forecast.
Internal table to hold the records of VBLB (JIT)
DATA: BEGIN OF tbl_vblb_jit OCCURS 0,
vbeln LIKE vblb-vbeln,
posnr LIKE vblb-posnr,
abart LIKE vblb-abart, "Release type
abefz LIKE vblb-abefz, "Cumulative Quantity
"Received by Customer
labnk LIKE vblb-labnk, "Delivery schedule
abrdt LIKE vblb-abrdt, "Deivery date
gjkun LIKE vblb-gjkun, "Current fiscal year
vjkun LIKE vblb-vjkun, "Previous fiscal year
END OF tbl_vblb_jit.
Internal table to hold the Forecast Schedule lines
DATA: BEGIN OF tbl_vbep_forecast OCCURS 0,
vbeln LIKE vbep-vbeln, "Sales document
posnr LIKE vbep-posnr, "Item number
etenr LIKE vbep-etenr, "Schedule line
edatu LIKE vbep-edatu, "Schedule line date
ezeit LIKE vbep-ezeit, "Arrival time "DN3K923909
wmeng LIKE vbep-wmeng, "Order quantity in sales units
prgrs LIKE vbep-prgrs, "Date type (day, week, month, interval)
abart LIKE vbep-abart, "Release type "DN3K923909
END OF tbl_vbep_forecast.
Internal table to hold the JIT Schedule lines
DATA: BEGIN OF tbl_vbep_jit OCCURS 0,
vbeln LIKE vbep-vbeln, "Sales document
posnr LIKE vbep-posnr, "Item number
etenr LIKE vbep-etenr, "Schedule line
edatu LIKE vbep-edatu, "Schedule line date
ezeit LIKE vbep-ezeit, "Arrival time
wmeng LIKE vbep-wmeng, "Order quantity in sales units
prgrs LIKE vbep-prgrs, "Date type (day, week, month, interval)
abart LIKE vbep-abart, "Release type "DN3K923909
END OF tbl_vbep_jit.
Internal table for Long texts
DATA: tbl_tline LIKE tline OCCURS 0 WITH HEADER LINE.
V A R I A B L E S *
DATA: v_count TYPE i,
V_REPID LIKE SY-REPID,
w_eins LIKE vbap-umvkz VALUE 1,
v_cumulative_deli_qty LIKE vblb-abefz,
v_text_name LIKE thead-tdname,
v_week LIKE scal-week,
v_count_h TYPE i, "Count of header records
v_count_f TYPE i, "Count of Forecast records
v_count_j TYPE i, "Count of JIT records
v_count_t TYPE i. "Count of Shipping instructions
TYPES: unixfile LIKE rlgrap-filename,
unixdir LIKE rlgrap-filename.
DATA: v_file1 TYPE unixfile,
v_file2 TYPE unixfile.
DATA: tbl_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE.
*data tbl_cust_sa.
S E L E C T - O P T I O N S / P A R A M E T E R S *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
Valid-to date
PARAMETER:
p_gueen like vbak-gueen obligatory,
Correction Delivery date
P_DELDT LIKE VBAK-GUEEN OBLIGATORY.
Begin of Changes - TIR-40266
Plant
SELECT-OPTIONS: s_werks FOR vbap-werks.
*SD document category
SELECT-OPTIONS: S_VBTYP FOR VBAK-VBTYP OBLIGATORY." Murali Poli
Sales organization
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG OBLIGATORY.
End of Changes - TIR-40266
SELECTION-SCREEN SKIP 1.
PARAMETER: r1 RADIOBUTTON GROUP rg1.
Material numbers file
PARAMETER: P_FILE1 LIKE RLGRAP-FILENAME.
PARAMETER: P_FILE6 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-003.
SELECTION-SCREEN POSITION 33.
SD SA Extract file
PARAMETER: P_FILE2 LIKE RLGRAP-FILENAME
DEFAULT 'C:\sd_sa_extract.txt'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 2.
PARAMETER: r2 RADIOBUTTON GROUP rg1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-004.
SELECTION-SCREEN POSITION 33.
PARAMETER: p_path1 TYPE unixdir OBLIGATORY DEFAULT '/tmp/'.
SELECTION-SCREEN END OF LINE.
Material numbers file
PARAMETER: PU_FILE1 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-003.
SELECTION-SCREEN POSITION 33.
SD SA Extract file
PARAMETER: PU_FILE2 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(64) text-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
A T S E L E C T I O N S C R E E N E V E N T S *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
v_repid = syst-repid.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
file_name = p_file1
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE6.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
FILE_NAME = P_FILE6
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file2.
v_repid = syst-repid.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
file_name = p_file2
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rg1.
IF r1 = 'X'.
IF p_file1 = '' OR p_file2 = ''.
MESSAGE w000 WITH 'Please select a PC file'.
ENDIF.
LOOP AT SCREEN.
IF screen-name = 'P_FILE1' OR
screen-name = 'P_FILE2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF r2 = 'X'.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE1' CHANGING pu_file1.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE2' CHANGING pu_file2.
IF pu_file1 = '' OR pu_file2 = ''.
MESSAGE w000 WITH 'Please select a UNIX file'.
LOOP AT SCREEN.
IF screen-name = 'PU_FILE1' OR
screen-name = 'PU_FILE2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pu_file1.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE1' CHANGING pu_file1.
PERFORM popup_unix_filename CHANGING p_path1 pu_file1.
PERFORM set_value USING 'P_PATH1' p_path1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pu_file2.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE2' CHANGING pu_file2.
PERFORM popup_unix_filename CHANGING p_path1 pu_file2.
PERFORM set_value USING 'P_PATH1' p_path1.
T O P - O F - P A G E *
TOP-OF-PAGE.
PERFORM delphi_header(z_delphi_header_footer)
USING
'E & S SD SCHEDULING AGREEMENTS EXTRACT DATA'(016)
space
sy-linsz.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
IF r1 = 'X'.
PERFORM upload_data_from_pc_files.
ELSEIF r2 = 'X'.
PERFORM upload_data_from_unix_files.
ENDIF.
PERFORM check_input_data.
PERFORM get_sd_sa_data.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
PERFORM process_data.
S U B - R O U T I N E S *
*& Form get_value
FORM get_value USING value(p_fieldname)
CHANGING value(p_fieldvalue).
IF v_repid IS INITIAL.
v_repid = syst-repid.
ENDIF.
REFRESH: tbl_dynpfields.
CLEAR: tbl_dynpfields.
tbl_dynpfields-fieldname = p_fieldname.
APPEND tbl_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = v_repid
dynumb = '1000'
TABLES
dynpfields = tbl_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF syst-subrc = 0.
READ TABLE tbl_dynpfields INDEX 1.
p_fieldvalue = tbl_dynpfields-fieldvalue.
ENDIF.
REFRESH: tbl_dynpfields.
ENDFORM. " get_value
FORM POPUP_UNIX_FILENAME *
Pops up dialog box to explore the unix filesystem and select a file *
--> VALUE(P_PATH) Path where to start exploring from *
--> VALUE(P_FILENAME) Default filename in the dialog box *
FORM popup_unix_filename CHANGING value(p_path) TYPE unixdir
value(p_filename) TYPE unixfile.
DATA: v_length TYPE i,
v_filename TYPE unixfile,
v_directory LIKE draw-filep,
v_file LIKE draw-filep.
IF p_filename(1) = '/' OR
p_path IS INITIAL.
v_filename = p_filename.
ELSE.
v_length = strlen( p_path ) - 1.
IF p_path+v_length(1) <> '/'.
CONCATENATE p_path '/' INTO p_path.
ENDIF.
CONCATENATE p_path p_filename INTO v_filename.
ENDIF.
CALL FUNCTION 'Z_UNIX_FILENAME_GET'
EXPORTING
def_filename = v_filename
mask = ',*.'
mode = 'G'
title = 'Get UNIX file...'
IMPORTING
filename = v_filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
CHECK syst-subrc = 0.
CALL FUNCTION 'CV120_SPLIT_PATH'
EXPORTING
pf_path = v_filename
IMPORTING
pfx_path = v_directory
pfx_file = v_file
EXCEPTIONS
OTHERS = 1.
CHECK syst-subrc = 0.
IF v_directory = p_path.
p_filename = v_file.
ELSE.
p_filename = v_filename.
ENDIF.
ENDFORM.
FORM SET_VALUE *
Sets the value of a field on the selection screen. *
--> VALUE(P_FIELDNAME) Name of the field on the selection screen*
--> VALUE(P_FIELDVALUE) Value of the field *
FORM set_value USING value(p_fieldname)
value(p_fieldvalue).
IF v_repid IS INITIAL.
v_repid = syst-repid.
ENDIF.
CLEAR: tbl_dynpfields.
tbl_dynpfields-fieldname = p_fieldname.
tbl_dynpfields-fieldvalue = p_fieldvalue.
APPEND tbl_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = v_repid
dynumb = '1000'
TABLES
dynpfields = tbl_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDFORM.
*& Form upload_data_from_pc_files
This subroutine is used to upload the data from input files
FORM upload_data_from_pc_files.
REFRESH: tbl_matnr.
CLEAR: tbl_matnr.
Upload the data from Delphi Materials file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file1
filetype = 'DAT'
TABLES
data_tab = tbl_matnr
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE e008 WITH 'Materials file'.
Message shown as "Error while reading Materials file"
ENDIF.
IF sy-subrc = 0 AND tbl_matnr[] IS INITIAL.
MESSAGE e013 WITH 'Materials'.
Message shown as "No records found in Materials file"
ENDIF.
DELETE tbl_matnr WHERE matnr = ''.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE6
filetype = 'DAT'
TABLES
DATA_TAB = TBL_CUST_SA
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE E008 WITH 'Customer/Sales Area Cross Reference file'.
Message shown as "Error while reading Materials file"
ENDIF.
ENDFORM. " upload_data_from_pc_files
*& Form upload_data_from_unix_files
This subroutine is used to upload the data from UNIX files
FORM upload_data_from_unix_files.
REFRESH: tbl_matnr.
CLEAR: tbl_matnr.
Get the complete filename for the Materials file
PERFORM get_full_filename USING pu_file1 CHANGING v_file1.
Open the Materials file
PERFORM open_dataset USING v_file1 'I' 'T' 1.
CHECK syst-subrc = 0.
Read the materials file
DO.
READ DATASET v_file1 INTO tbl_matnr.
IF syst-subrc <> 0.
EXIT.
ENDIF.
Populate the read data into the internal table
APPEND tbl_matnr.
ENDDO.
PERFORM close_dataset USING v_file1.
ENDFORM. " upload_data_from_unix_files
FORM GET_FULL_FILENAME *
Uses the logical path if necessary to get the full filename *
If the filename already has a directory specified, that itself will *
be the full filename *
Else the logical path for Conversions will be prefixed to the given *
filename *
FORM get_full_filename USING value(p_file) TYPE unixfile
CHANGING value(p_fullfile) TYPE unixfile.
DATA: v_length TYPE i.
IF p_file(1) = '/' OR
p_path1 IS INITIAL.
p_fullfile = p_file.
ELSE.
v_length = strlen( p_path1 ) - 1.
IF p_path1+v_length(1) = '/'.
CONCATENATE p_path1 p_file INTO p_fullfile.
ELSE.
CONCATENATE p_path1 '/' p_file INTO p_fullfile.
ENDIF.
ENDIF.
ENDFORM.
FORM OPEN_DATASET *
Opens dataset in the specified mode *
--> VALUE(P_FILE) Name of file to be opened *
--> VALUE(P_IOMODE) 'I' for Input / 'O' for Output *
--> VALUE(P_BTMODE) 'T' for Text / 'B' for Binary *
--> VALUE(P_LEVEL) If set to > 1, will write error message to *
list Else will supress the error message but *
will be available in SYST-MSGV1 *
FORM open_dataset USING value(p_file) TYPE unixfile
value(p_iomode) TYPE c
value(p_btmode) TYPE c
value(p_level) TYPE i.
DATA: v_rc LIKE syst-subrc,
v_msg(100),
v_listmsg(100).
IF p_iomode = 'O'.
IF p_btmode = 'B'.
OPEN DATASET p_file FOR OUTPUT IN BINARY MODE MESSAGE v_msg.
ELSE.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE MESSAGE v_msg.
ENDIF.
ELSE.
IF p_btmode = 'B'.
OPEN DATASET p_file FOR INPUT IN BINARY MODE MESSAGE v_msg.
ELSE.
OPEN DATASET p_file FOR INPUT IN TEXT MODE MESSAGE v_msg.
ENDIF.
ENDIF.
IF syst-subrc <> 0.
v_rc = syst-subrc.
syst-msgv1 = v_msg.
IF p_level > 0.
CONCATENATE 'Unable to open' p_file
INTO v_listmsg
SEPARATED BY space.
IF p_iomode = 'O'.
CONCATENATE v_listmsg 'for Output'
INTO v_listmsg
SEPARATED BY space.
ELSE.
CONCATENATE v_listmsg 'for Input'
INTO v_listmsg
SEPARATED BY space.
ENDIF.
IF p_iomode = 'B'.
CONCATENATE v_listmsg 'in Binary mode'
INTO v_listmsg
SEPARATED BY space.
ELSE.
CONCATENATE v_listmsg 'in Text mode'
INTO v_listmsg
SEPARATED BY space.
ENDIF.
WRITE: / v_listmsg.
WRITE: /3 '--', v_msg.
syst-subrc = v_rc.
ENDIF.
ENDIF.
ENDFORM.
FORM CLOSE_DATASET *
Closes dataset *
--> VALUE(P_FILE) Name of the file to be closed *
FORM close_dataset USING value(p_file) TYPE unixfile.
CLOSE DATASET p_file.
ENDFORM.
*& Form check_input_data
This subroutine is used to check the data from X Ref files
FORM check_input_data.
DESCRIBE TABLE tbl_matnr LINES v_count.
Use the material conversion routine to pad the material numbers
with zeroes
LOOP AT tbl_matnr.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = tbl_matnr-matnr
IMPORTING
output = tbl_matnr-matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
TRANSLATE tbl_matnr-matnr TO UPPER CASE.
MODIFY tbl_matnr.
ENDLOOP.
Get the materials from SAP database using the input materials
IF NOT tbl_matnr[] IS INITIAL.
SORT tbl_matnr BY matnr.
SELECT matnr FROM mara
INTO TABLE tbl_mara
FOR ALL ENTRIES IN tbl_matnr
WHERE matnr = tbl_matnr-matnr.
SORT tbl_mara BY matnr.
ENDIF.
Check the existence of input materials in SAP database
LOOP AT tbl_matnr.
READ TABLE tbl_mara WITH KEY matnr = tbl_matnr-matnr
BINARY SEARCH.
IF sy-subrc <> 0.
CONCATENATE 'Material' tbl_matnr-matnr 'does not exist'
INTO tbl_error-error_text
SEPARATED BY space.
APPEND tbl_error.
CLEAR tbl_error.
DELETE tbl_matnr.
ENDIF.
ENDLOOP.
ENDFORM. " check_input_data
*& Form get_sd_sa_data
This subroutine is used to get the SD Scheduling data from database
FORM get_sd_sa_data.
*begin of changes - DN3K923909
DATA: tbl_vbep LIKE tbl_vbep_forecast OCCURS 0 WITH HEADER LINE,
tbl_vblb LIKE tbl_vblb_forecast OCCURS 0 WITH HEADER LINE.
*end of changes - ND3K923909
REFRESH: tbl_vbap_vapma, tbl_vbpa, tbl_vblb_forecast,
tbl_vblb_jit, tbl_vbep_forecast, tbl_vbep_jit.
CLEAR: tbl_vbap_vapma, tbl_vbpa, tbl_vblb_forecast,
tbl_vblb_jit, tbl_vbep_forecast, tbl_vbep_jit.
Get the Scheduling Agreements
SELECT avbeln aposnr
a~vgbel
AAUART avkorg avtweg aspart a~kunnr
a~ablfz
A~MATNR
a~pstyv
a~werks
a~lgort
a~vstel
ATRVOG BVBTYP BVSBED BBSTNK B~KTEXT
FROM VAPMA AS A INNER JOIN VBAK AS B
ON bvbeln = avbeln
INTO TABLE tbl_vbap_vapma
FOR ALL ENTRIES IN tbl_mara
WHERE a~matnr = tbl_mara-matnr
Begin of Changes - TIR-40266
AND a~vkorg IN s_vkorg
AND a~werks IN s_werks
End of Changes - TIR-40266
AND A~TRVOG = '3'
AND B~VBTYP IN S_VBTYP. "Murali Poli
and a~abgru = ''
and b~gueen >= p_gueen.
SORT tbl_vbap_vapma BY vbeln posnr.
IF NOT tbl_vbap_vapma[] IS INITIAL.
SELECT VBELN POSNR VGBEL ABLFZ PSTYV LGORT VSTEL FROM VBAP
INTO TABLE TBL_VBAP FOR ALL ENTRIES IN TBL_VBAP_VAPMA
WHERE VBELN = TBL_VBAP_VAPMA-VBELN
AND POSNR = TBL_VBAP_VAPMA-POSNR.
LOOP AT TBL_VBAP_VAPMA.
READ TABLE TBL_VBAP WITH KEY VBELN = TBL_VBAP_VAPMA-VBELN
POSNR = TBL_VBAP_VAPMA-POSNR.
IF SY-SUBRC = 0 .
TBL_VBAP_VAPMA-VBELN = TBL_VBAP-VBELN.
TBL_VBAP_VAPMA-POSNR = TBL_VBAP-POSNR.
TBL_VBAP_VAPMA-VGBEL = TBL_VBAP-VGBEL.
TBL_VBAP_VAPMA-ABLFZ = TBL_VBAP-ABLFZ.
TBL_VBAP_VAPMA-PSTYV = TBL_VBAP-PSTYV.
TBL_VBAP_VAPMA-LGORT = TBL_VBAP-LGORT.
TBL_VBAP_VAPMA-VSTEL = TBL_VBAP-VSTEL.
MODIFY TBL_VBAP_VAPMA .
ENDIF.
ENDLOOP.
tbl_vbap_vapma_temp[] = tbl_vbap_vapma[].
*--Begin of UnCommentDIR-51476-DN3K932648
-------------- Begin of Comment ----------- CCR-50124 DN3K928457
SORT tbl_vbap_vapma_temp BY vbeln.
DELETE ADJACENT DUPLICATES FROM tbl_vbap_vapma COMPARING vbeln.
-------------- End of Comment ----------- CCR-50124 DN3K928457
*--End of UnCommentDIR-51476-DN3K932648
*--Begin of CommentDIR-51476-DN3K932648
-------------- Begin of Insert ----------- CCR-50124 DN3K928457
Duplicate Line Items are being deleted.
SORT tbl_vbap_vapma BY vbeln posnr.
DELETE ADJACENT DUPLICATES FROM tbl_vbap_vapma COMPARING vbeln posnr.
The field for contract in SA is being modified for uniqueness
loop at tbl_vbap_vapma.
clear: v_vgbel, v_posnr.
v_vgbel = tbl_vbap_vapma-vgbel.
v_posnr = tbl_vbap_vapma-posnr.
if not v_vgbel is initial .
shift v_vgbel left deleting leading v_zero.
shift v_posnr left deleting leading v_zero.
v_posnr = v_posnr / 10.
condense: v_vgbel, v_posnr.
if v_posnr le 9.
concatenate v_vgbel '0' v_posnr into v_vgbel.
else.
concatenate v_vgbel v_posnr into v_vgbel.
endif.
endif.
tbl_vbap_vapma-vgbel = v_vgbel.
modify tbl_vbap_vapma.
endloop.
-------------- End of Insert ----------- CCR-50124 DN3K928457
*--End of CommentDIR-51476-DN3K932648
Get the Partner details
select vbeln posnr parvw kunnr
*Start of Murali Poli
SELECT VBELN POSNR INCO1 INCO2
INTO TABLE TBL_VBKD
FROM VBKD
FOR ALL ENTRIES IN TBL_VBAP_VAPMA
WHERE VBELN = TBL_VBAP_VAPMA-VBELN.
and posnr = tbl_vbap_vapma-posnr.
*End of Murali Poli
SELECT vbeln posnr parvw kunnr lifnr "DN3K923909
INTO TABLE tbl_vbpa
FROM vbpa
FOR ALL ENTRIES IN tbl_vbap_vapma_temp
WHERE vbeln = tbl_vbap_vapma_temp-vbeln
AND parvw IN ('WE', 'SP').
*begin of changes - DN3K923909
select vbeln posnr abart abefz labnk abrdt gjkun vjkun
into table tbl_vblb_forecast
from vblb
for all entries in tbl_vbap_vapma
where vbeln = tbl_vbap_vapma-vbeln
and posnr = tbl_vbap_vapma-posnr
and abrli = '0000'
and abart = '1'.
SELECT vbeln posnr abart abefz labnk abrdt gjkun vjkun
INTO TABLE tbl_vblb
FROM vblb
FOR ALL ENTRIES IN tbl_vbap_vapma
WHERE vbeln = tbl_vbap_vapma-vbeln
AND posnr = tbl_vbap_vapma-posnr
AND abrli = '0000'
AND abart IN ('1','2').
SELECT vbeln posnr etenr edatu ezeit wmeng prgrs abart
INTO TABLE tbl_vbep
FROM vbep
FOR ALL ENTRIES IN tbl_vbap_vapma
WHERE vbeln = tbl_vbap_vapma-vbeln
AND posnr = tbl_vbap_vapma-posnr
AND abart IN ('1','2').
Get the current Forecast delivery schedule
tbl_vblb_forecast[] = tbl_vblb[].
DELETE tbl_vblb_forecast WHERE abart = '2'.
Get the current Forecast Schedule lines
tbl_vbep_forecast[] = tbl_vbep[].
DELETE tbl_vbep_forecast WHERE abart = '2'.
Get the current JIT delivery Schedule
select vbeln posnr abart abefz labnk abrdt gjkun vjkun
into table tbl_vblb_jit
from vblb
for all entries in tbl_vbap_vapma
where vbeln = tbl_vbap_vapma-vbeln
and posnr = tbl_vbap_vapma-posnr
Maybe you are looking for
-
Cyclic Redundancy Check when trying to install Windows XP Pro SP3.
Hi, first time posting and I did check for online and on these forums for the answer. I am stumped really and I don't know what to do. I go through the Partitioning part with Boot Camp fine. It's where I am on the blue Windows XP screen installing it
-
I clicked "upgrade" for the new version of Keynote in the Apps Store. Now it says "Installed", but it's still the old (5.3) version on my computer. Now what?
-
Where to install SSRS in ConfigMgr Environment
I am planning a SCCM 2012 R2 environment. I have decided on 1 SCCM Server. A 2 node SQL Cluster on a separate server. And several Distribution points over different sites etc.. I was wondering where is the best place to install SSRS so I can configur
-
Please! Help me with External Links.
when I click the button to "Enable as a Hyperlink", the default seems to be to an "External Link". In addition to this, an address shows up in the URL window. The problem is that I don't know where this particular address came from and I will never,
-
Can someone help with this simple application
I am taking my first java class and there are limited resourses for the class as far as getting help with coding. Any hoo if any one can point me in the correct direction from the following information listed below I would be greatfull. I am trying t