Sales order with refernce to contracts in different sales area

Hi Gurus,
I am creating a sales order with reference to a contract.I am making sales order sold-to-party as release order.
so my Contract sold-to-party and the sales order sold-to-party are different but both belong to same sales area. In the above case i am able to create sales order.
In other case though my Contract sold-to-party and the sales order sold-to-party are different but if they both belong to different sales area, i am unable to create a sales order.It says no contracts exits for sold-to-party.
i made both the customers as partners .
<b><POINTS OFFER REMOVED BY MODERATOR></b>.

Hi,
Could you please let us know why are you opening multiple threads in different forums for the same question?
You have already created another thread in ABAP General
creating sales order with reference to contracts
Please refrain from using "Any guidance on this is fully rewarded with points."
<b>Please read the rules of engagement before posting.</b>
Posting multiple threads for same question in different/same forums and making point offers are not encouraged on the forum.
Thank you

Similar Messages

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Create a Sales Order with Reference to Contract using IDoc / LSMW ( AFS )

Hi Gurus,
I need to crate a Sales Order with reference to a Contract. I need to upload Sales Orders with reference to contract via LSMW.
So far, I've been able to create the Sales Order with ref to contract. But, the Sales Order Quantity is not getting deducted from the Original Qty in Referred Contract ( When try to create another Sales Order referring to the same Contract.) When a Sales Order is created manually, this is working fine.
Please tell me if I've missed some parameter which stopping it create the link to exact schedule line ( Sizes level )
The Details of the IDoc which is been created via LSMW are as follows;
Message Type: ORDERS
Basic Type     : /AFS/ORDERS05
Process Code : ORDE / DELO
( Tried with both process codes. But the Identification is the same for both: IDOC_INPUT_ORDERS )
*_In Header;_
Segment : E1EDK02 - IDoc: Document header reference data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped for field BELNR
*_In Item;_
Segment : E1EDP02 - IDoc: Document Item Reference Data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped to field BELNR
Line Item of the Contract is mapped to field ZEILE
I also tried passing the Schedule line of Contract in Segment : E1J3P01 AFS IDoc: Doc.item general data
to following fields;
J_3AETENV
J_3AVGETE
/AFS/UETENR
Still its not getting updated in the VBEP also..
Please help me with regard to this. Points will be awarded for your valuable contribution.
Thanks.

Hi,
This issue is been resolved.
One of my friend helped me with resolving this issue..
Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
u2022     SPRO --> SD -->Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types --> Field : Outline agreement message; from blank to u201CBu201D.
u2022     SPRO -->SD -->Sales --> Sales Documents --> Sales Document Header --> Maintain Sales Document Types for AFS --> Field : Outline agreement message; from blank to u201CAu201D

Doubt in creating a sales order with reference to contract

Hi all,
when I create the sales order with reference to contract, in the table VBFA, the field PLMIN is set to zero some times and set to '+' some times. May I know whats the functionality behind this. Any pointers on this will be helpful.
Regards,
A.Rathinaprakash

Hello A.Rathinaprakash,
This is an Indicator which indicates the quantity or value in the target document(means Sales order) has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document(means contract).
Example from the Help file..
In sales documents, for example, you can expect the following results:
Quotation   -> Sales order: positive effect
Contract    -> Return: negative effect
Sales order -> Sales order: no effect
In billing documents, for example, you can expect the following results:
Delivery    -> Invoice: positive effect
Delivery    -> Cancellation: negative effect
Delivery    -> Pro-forma invoice: no effect
Hope it helps..
Regards,
HP

Sales order with reference to contract using IDOC_INPUT_ORDERS

Hi all,
I had the requirement to create sales order with reference to contract based on some validations of idoc values and then passing the modified idoc data table to IDOC_INPUT_ORDERS. I have completed the coding till the modification of data in a new function module ('Z') and then calling the IDOC_INPUT_ORDERS FM inside that. Now my problem is while creating the sales order, the bdc for Txn VA01 is not populating those values to screen fields which I want to populate. I could find out that some modifs needs to be done in some user exit for reference to contract case.But finding difficulty in getting the exact place to make the modifications. Any pointer to this problem would be highly appreciated.
Regards,
Divya

Hi,
This issue is been resolved.
One of my friend helped me with resolving this issue..
Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
u2022 SPRO --> SD -->Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types --> Field : Outline agreement message; from blank to u201CBu201D.
u2022 SPRO -->SD -->Sales --> Sales Documents --> Sales Document Header --> Maintain Sales Document Types for AFS --> Field : Outline agreement message; from blank to u201CAu201D

Sales order with reference to contract

Hi experts,
I'll like create a sales order with reference to contract.
In VA01, when I select "create with reference", system visualize a pop-up windows opened in offer view.
Is it possible open that pop-up windows in contract view as default?
Thanks to all.
Angelo

Hi,
If you want it automatic at creation of order then go to VOV8
Select your order type >>> Details >>> Under transaction flow Tab
Message: Mast.contr - C (Check & baranch directly to selection list)
Now when ever you create sales order for perticular customer & material, sytem give pop up screen, for this part open contract is available along with contract number,copy it directly.
Kapil

Problem with creation of Sales Order with reference to Contract

Hi,
I have a problem when creating Sales order with reference to Contract , shipping condition was not copied. Is there any existing copy routines suitable to accomodate this?
Thanks!

your functional team can help you in finding one.

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

BAPI to create Sales Order with reference to contract

Hi All,
I am trying to create Sales Order with reference to Contract, but although the
order gets created, it does not contain reference document information.
The BAPI I am using is BAPI_SALESORDER_CREATEFROMDAT2.
Would someone know which parameters I have to papulate,or have any other suggestion
how to accomplish my task?
Thank you so much,
Mayank

Hi - Try Filling these three fields in the Item details.
REF_DOC
REF_DOC_IT
REF_DOC_CA
Reward points if helpful

Creation of Release order with reference to Contract

Dear experts,
We are doing upgradation from 4.6B to ECC6. During testing ,while creating release order with reference to contract,(Contract was created with Account assignment category-K and item category-D),cost center is copied from contract in purchase order in account assignment tab of item details,
but when i save it window is poping up(account assignment service line item 10-small window) asking to enter cost center again. Even if i enter the same cost center in that window,cost center field,again it is asking same window is poping up for entering cost center.
Can any body please tell me inspite of cost center is copied,why this window is coming ,please suggest.This problem is not there in 4.6B version
Advance thanks,
Regards,
Dayanand

Please check to OXK1, and compare it to both system.Or check the config guide in IMGMM-Purchasingacc.assigment--Set subscreen for acc assingment (coding) block.

Create Order with reference to Contract header

Hello,
In copy control from Contract to order can you please tell me if it is possible to copy only header data?
Meaning ,when creating Order with reference to contract I would like to copy contract header data only
Thanks,
Dave

Hi Dave,
You can try this,
Go to VTAA--> Select your copy control of contract to order --> Click at details --> Remove the check box of
Copy item number
Complete refrence
Then double click at "Item" left side --> Select your item category --> Click at details --> Remove the check box of
Copy Schedule lines
Then try to create and revert back with your findings,
Regards,
MT

Error - Only partial orders with status ER, IG, WO and WR are allowed

Hi,
How to troubleshoot the distribution error "only partial orders with the status ER, IG,WO, WR are allowed"
All other settings are made.
BR,
Anirudh,

Hi Anirudh,
Generally, logs in CVI9 with status 'PC' indicate the processing of the documents at the communication layer/server. You can also check the sending orders in transaction SCOT (Utilities > Overview Send requests). If, for example, the documents are in 'waiting' status, this indicates that it is not distributed due to improper SCOT settings.
From DMS point of view please check the following settings on your system:
1. Please activate the workflow templates again in transaction SWDD:
- WS20000104
- WS20000137
2. Furthermore, please check whether the data processing distribution type (e.g.: INT) has been maintained with value "2" in SPRO customizing
3. Verify that the event type linkage is set in SWE2 for BUS1082 INITATED. So,Go to swe2 transaction. In the line below set the 'Type linkage' flag:
"BUS1082 INITATED WS20000104"
Please see also SAP note 997428 for further information and check if the recieving user has maintained the full name (first and last name) in transaction SU01.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Creating sales order with reference to contracts

Hi Gurus,
I am creating a sales order with reference to a contract.I am making sales order sold-to-party as release order.
so my Contract sold-to-party and the sales order sold-to-party are different but both belong to same sales area. In the above case i am able to create sales order.
In other case though my Contract sold-to-party and the sales order sold-to-party are different but if they both belong to different sales area, i am unable to create a sales order.It says no contracts exits for sold-to-party.
i made both the customers as partners .
Any guidance on this is fully rewarded with points.

Each and everytime your both SOLD-TO should be in same sales area.
Enhance the Contract sold-to-party's customers sales area specific data in XD02 so, it could come in to sales area of the Order's Sold-to-party.
Regards,
Naimesh Patel

Sales order with reference to Contract and another sales order

Hi Gurus,
I would like your suggestions on one of the business requirement i have.
We are creating a new EDI interface with few of our customers to create sales orders. While creating sales orders, it should validate if there are any open contracts available and if yes, then the sales order should be created with reference to it. so far good but there are chances that sold to party on the contract could be different from sold to party on the EDI order sent by customer (customer can have more than one sold to party on their system). IDOC's are failing in this scenario and not able to create a sales order since sold to partys are not matching. I need your help.
Can we do some thing in customer master to handle this scenario?
or
Create a new sales doc type (YEDI or some thing) and create sales order from IDOC without reference to contract. Business will look into all YEDI order and create the actual sales order out of it but the challenge here is i cannot refer contract to the actual sales order or YEDI order.
Is it possible to create sales order with ref to a contract and another sales order?
Please help
Thanks
Venkat

Hello Venkat
What is the linkage between sold to party of contract and sold to party of order..If customer has more than one sold to party.
Why don't you use customer hierarchy....link all sold to party of a customer to hierarchy node.for example...you create a hierarchy node 1000 and assigned customers 2000 and 3000 to it.you have contract for 2000..so when you create a sales order for 3000 check in knvh table it's customer hierarchy 1000 and get all sold tos assigned to hierarchy...which is 2000....check if contract exist for sold to's..If yes then create order with reference.
Let us know if it works for you.
Thanks
Amit Gupta

EDI: creating a sales order with reference to contract

Dear gurus,
we would like to create a sales order with reference to a SD contract from an ORDERS IDoc.
OSS say we have to populate the E1EDx02 segments with the contract number to do this.
We tested this in our system by manually editing the incoming IDoc and this is what we found:
- qualifier u201C005 : Customer Contract Numberu201D set and BELNR = u201Cthe customeru2019s outline agreement number in his MMu201D (= normal MM behaviour) -> reference is not processed at all, sales order is created without reference
- qualifier u201C043: Vendor Contract Numberu201D set and BELNR = our contract number in SD -> Sales order successfully created. BUT where can I store an external outline agreement number in MM so that the BELNR in the IDoc is populated with it?
- qualifier u201C058: Customer Contract Numberu201D set and BELNR = the customeru2019s outline agreement number in his MM -> Error:
The system could not determine a contract number
Message no. VG226
Diagnosis
The system could not determine a contract number for the selection criteria: external contract number 5100000020 and customer number 0044000004.
This error appears although we maintained the external number 5100000020 in the PO number field (VBKD-BSTKD) in our SD contract.
Could anyone please explain what we do wrong?
Cheers
Alicia

Hi again,
@Lakshmipathi: Thank you, but it is VG226, like I wrote. But still, the OSS note is interesting: "You create a sales order with reference to an MM contract using EDI." Where's the sense in that? Why would I ever want to create a sales order with reference to an outline agreement in MM???
@Rags: Sure we could do that, but I find it hard to believe that there is no standard way to do this. Especially given there are plenty of OSS notes stating that this is possible, e.g. note 562710.
Any other ideas?
Cheers
Alicia

Sales order with refernce to contracts in different sales area

Similar Messages

Maybe you are looking for