Sales orders missing in MD04

Hi,
We have a specific issue where some of the sales order which are already confirmed but are missing in MD04.
We have not able to identify the reasons. For correction we are using the program SDRQCR21 which again displays the missing SO in MD04.
My question - What does this program do which causes reapprearing of SO in MD04? Is it updating some table etc.
What is SO related table through which SO information is diaplayed in MD04.
Thanks in advance for the reply.
regards,
Mohit

It is very difficult to establish what causes incorrect requirements.
There are some notes that fix bugs relating to incorrect requirements. Do a note search for SDRQCR21 + your support Pack; some of the hits returned may be fixing a program error that relates to yuor issue,
However, It has been my experience that user exits are almost nearly always responsible, so you should review all relevant user exits to see if they are having an effect.

Similar Messages

  • Purchase requisitions which created during Sales Order missing in MD04

    Hi Guys,
    I have an issue with MD04.
    Purchase requisitions which created during Sales Order missing in MD04 are not appearing in MD04, but these are showing in ME5A. After MRP Run only PRu2019s are showing in MD04.
    Requirement type used 511 during creation of Sales Order.
    Please advise me if any config/ Master data is missing OR If required any enhancement.
    Regards,
    Purna

    Did you checked for the Firming indicator in PR's?

  • Sales order due for MD04

    Hello Friends,
    I am creating MTO sales order and production people are creating MD04. How from SD point of view one can see the list of sales order which have been considered in MD04 / Pending list of sales order that are yet to be considered for MD04.
    IN MD04 the user gives the material code and plant code before running the transaction. Is there any transaction by which an production user can find out ( without giving the material code ) the list of sales order for which MD04 has to be run.
    Regards
    Debesh

    Dear Dhamane,
    Thanks for your prompt reply. I am aware of VA05. But my requirement is the production people want to know how many open sales order are there for which production order has to be carried out
    VA05 will give the complete list for which delivery is pending.  For example.
    I am releasing 10 sales order today. Out of this 10 sales order 5 are of MTO and 5 are Made to Stock. Out of 5 MTO sales order against 2 sales order MD05 has been carried out.
    So either the sales people or production people if wants to find out the pending list of sales order against which no MRP run has been done, then the list should give the details of 3 sales order of MTO type not run in MD04.
    Do we have any transaction in standard SAP for this kind of pending list or we have to go for the development
    Regards
    Debesh

  • Sales orders not appearing MD04

    Hi
    when we create the sales orders which are relevent for MRP i. e with scehedule line category CP, It should definitely appear in MD04 immediately.
    oflate I am finding , there is a time lag ,between order creation time & time of appearing in MD04, of 10 /15 hrs.
    I have never encountered such a situation earlier.
    This is happening at times.
    I am not finding any OSS notes pertaining to this scenario.
    Can any one though some lighton this tell me what could be the reason.
    Regards
    YMREDDY

    Hi,
    The Sales requirements are stored in a table VBBE and VBBS, when order is created or changed. The MD04 read the records from the above tables and display the records. I don't think there is a definite answer for this problem, except check your config. and check your user exits. The problems will occure when you have more customization to your Sales order  process.
    If you are able to reproduce the problem then it is easy to track the issue by activating and inactivateing the user exits.
    There is a program SDRQCR21 provided by SAP which fixes the sales requirement descripancies. Take a look at the Note: 25444
    Thanks
    balu

  • Sales orders missing

    Iam  having 10 sales orders in the report but when iam executing the query its showing me only 8 sales ordes at the drill down i want to know what the reason may be for those missing 2 sales orders
    Regards
    lakshmi.

    Hi,
    1.        What are the selections in your selection screen?
    2.        Check if there is some personalization done on the selection screen
    3.        Check Query Properties for 'Repeated Rows turned off' - turn it on
    4.         Are these 10 uniques sales orders - maybe records are relevant to same sales orders and so are not showing up

  • Sales order quantity in MD04

    Hi Gurus,
    This is my problem -
    51 links (Base UoM) = 2.5 feet (Sales & Production UoM)
    Delivery unit = 53 links
    In VA01 -> when I entered Sales order = 12 feet system automatically rounded it to 12.990 feet.
    I also received a pop up showing "Item 10 rounded to 265 lk. Rounding reasons 1,2,8 -> long text"
    In MD04 -> when I look at the Sales order quantity = 264.996 links.
    Ran MRP and the planned order quantity = 265 links
    There is a surplus inventory of  ------------> 0.0004 links
    Settings in CUNI: (due to business reasons - Links can NOT be in Decimals. Feet has to be in decimals)
    CUNI
    Decimal places
    Decimal rounding
    Link
    0
    0
    Feet
    3
    3
    Please help

    Thanks a lot Dave. You are the only guy who really understood my issue in the first place.
    And you asked all the right questions.
    Just for the sake of our discussion - I created a brand new material (material setup is same as production client). MRP settings- Proc type E, PD, EX, no rounding profiles, strategy 40, Collective.
    Material master sales view
    Rounding on Sales order
    MD04 before MRP run
    MD04 after MRP run
    MD04 in Feet
    Production order conversion
    Please let me know if you can not see these images.
    I really appreciate your help.
    Sorry for the delay in reply. I was travelling.
    Thanks

  • Blocked sales order showing in MD04.

    Hi,
    I have put delivery block in sales order, still sales order showing in stock requirement list (MD04)?
    Why and how I can avoid this?
    Thanks in advance

    Dear ,
    You have set Blocked in sales order , it will still  show up in the MD04 because MD04 shows all the reciepts and requirement as per filetre and selection rule .
    n case , you put the schedule line itme categery as CN  or set reeason for rejection option in Sales Order line item (va02) , then it will not show up in MD04 .
    Sales Order - MD04
    Hope this is clear
    regards
    JH
    Edited by: Jiaul Haque on Aug 26, 2010 11:01 AM

  • Delivery block in sales order and requirements md04

    Hello and good morning to all,
    we have the following scenario:
    From our customer we received some sales order via EDI. "XI"/"SAP" created the standard sales order TA with delivery block Z1 ( header ) - all things are blocked.
    The problem is, for the sales orders with delivery block Z1 we have also requirements in md04.
    We have also set Reasons for and Scope of Deliv.Blocks: Transfer of Req.Block
    How we can block / stop the requirements in md04 for sales orders with delivery block?
    Thanks for your help!
    Best regards
    Petra Schober

    I dont think with Standard Customization you can achieve this with Delivery blocks. As you aware, with delivery blocks you can just stop the confirmation ,pick, pack & GI. but the TOR.
           Even if you set the Delivery block "01- Credit limit', then system re-set confirm qtty as "Zero". But still order requirements will pass to MD04 ( assumption , Block is temparory, anytime it can be released, but if requirement is not transferred for planning, then its difficult for the planner to make the requirement available on specified time) .
                     Only "reason for rejection" will restrict to not to transfer to MD04. So try to explore the functionality of "Reason for rejection" & apply the same with "Delivery Blocks". But you may need enahancement to achieve this.
    Regards,
    Reazuddin MD

  • Sales Order - Missing some values at  Header

    Hi all,
       I have a sales order with item category TAQ.  Two items go to one plant, and one item go to another plant.  All pricing exist at line item level. However at header level, the net value only include net value of the one items in one plant.  Net value of the sale order is missing the two items.
    I don't understand how this happen.  There are pricing calculations for all 3 items at the line level.
    Would anyone have any suggestions ? 
    thanks
    joyce

    HI,
    When you say pricing will be calculated at header level, do you mean at the finished goods level  in sales order ?
    thanks
    Joyce
    If you are working on BOM scenario, then for TAQ the pricing will be calculated at header level only for Higher level item. for other items, item category must be different.

  • Sales Order Stock in MD04

    Hi,
    I would like the sales order stock to be visable in the MRP/MD04, how to do that without including all other block stock?
    BR,
    Christian

    Hi Christian
    Sales order stock is always visible in MD04... Can you elaborate your requirement little more ?
    Regards
    Bala

  • Sales order missing in table and document flow

    Hi
    This is my client sales process sales order-- delivery -- billing.
    but when client check billing document flow ,found that some billing document don't have sales order no in document flow, checked in table as well but some sales order are missing but delivery and billing no's are there .
    How to fetch missing sales order.
    Regards
    Sanjit

    Dear Sanjit,
    Though this is abnormal but possible.
    You can check following scenario yourself in Ides or test system
    Create one sales order using VA01
    create delivery with reference to sales order before saving delete all items from delivery and enter same items again. and save the delivery.
    Now go to VL02n and check the document flow of that delivery. you will find sales order reference missing.
    It looks like delivery type LF is created without reference to sales order.
    And if you check the document flow of sales order it show no reference delivery is created.
    Actually once you delete items form delivery all the references also gets deleted and then you can enter not only same material but can enter any material, any quantity and you can do PGI and billing also, system will not stop you anywhere but you can not find the reference sales order.
    The only possible solution i think is delete the delivery doc and create again.
    Regards
    Mayank

  • Quotation number instead of sales order number in MD04

    Dear all
    When I create sales order with reference to quotation and when I run mrp through MD50 then instead of customer order the MRP element is showing the quotation number.I want the system to show the sales order number.
    Please give inputs
    Thanks
    ravi

    Hi ravi
    After creating Sales order immediately come to Md04 and see before running the MRP. All the sales order will be display irrespective of your planning strategy.
    Check it
    In material master MRP 3 view Availability checking group should be 02 individual. Then all the sales order will be displyed in MD 04
    Regards
    J . Saravan

  • Error in Sales order, missing order reason

    Hi All,
      We are trying to create a sales order in the CRM Mobile Client and we see the following error.
    mandatory check failed for order reason(reason for business transaction) of the business object sales transaction.
    Any ideas on how to resolve the issue.

    Hi,
    I am not sure whether this is standard behaviour.
    Did you make any settings for order reason in MSY -> Sales Transaction Settings -> Field Property Maintenance ?
    Regards,
    Wolfhard

  • Production order missing from MD04

    Hi all,
    I have a production order which is not yet closed nor teco but unable to see it in MD04.
    I've checked the status changes but they are ok. I've checked the material is MRP relevant.
    Where else is missing?
    Thanks.

    Dear,
    Check the material for which you have created the production order is relevant for MRP in MRP1 View of material master.
    Also check in OPJJ that include production order is 'X'.  IF not select it.
    Hope it will help you.
    Regards,
    Alok Tiwari
    Edited by: Alok Kumar Tiwari on Oct 31, 2011 6:53 PM

  • Planned order missing in md04

    Hello,
    i did a confirmation for 100 quantites in APO ppds 10 days back, but i was not able to see the planned order in md04 tcode.
    But yesterday i could see the planned order in md04 tcode.
    Please let me know what would be the reason.
    Thanks in advance.
    karthi.

    Hi Karthi,
    The planned order got created 10 days back once the confirmation
    has happened which is the SAP standard functionality.
    But once it is created, it is not updated in md04 due to inconsistency.
    It would have got struck in inbound/outbound queues or it would have
    got displayed as a result of /sapapo/ccr run or upon clearing the
    queues.
    Regards
    R. Senthi Mareeswaran.

Maybe you are looking for