Sales orders not reflecting in MD04

Hi all
Can anybody explain reason why sales orders are not reflecting to MD04. If possible kindly give config settings for this issue...!
Thanks in advance
Nadh

Hi,
Please check the check box for the CP and MRP combination in the SPRO setting and tick the check box for Availability check and requirment.
sales distribution --> basic Functions -->Availabiltiy chekc n transfer of req -->Define procedure for each schdule line category
I hope this is helful for you.
if still it is not solved ,please clarify whether r u using std requirement type or your own requirement type.
best Regards
Srinivas

Similar Messages

  • Sales orders not showing on MD04

    Hi Gurus,
    Last week we had copied production environment into quality system. Now when the users are creating sales orders in Q system, they are not able to see the sales orders in MD04? What is the reason for this?
    Thanks
    Anusha

    Go to your sales order and note the schedule line category of the line item which you want to check
    In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box
    If you tick that then this order for this line item will appear in MD04
    Check :
    MD04 - Configuration Points
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/md04-issue-sales-orders-2584812

  • Sales orders not appearing in MD04

    Hi,
    Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could  be the reason and how to resolve such thing.
    regards
    sachin

    sachin arora wrote:>
    > Hi,
    >
    > Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could  be the reason and how to resolve such thing.
    >
    > regards
    >
    > sachin
    Hi Sachin,
    MD04 is the stock requirement listing.
    Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
    However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
    For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
    Once you save the sales order for such a material it will get listed in MD04.
    Hope it helps.
    Thanks & Regards
    Abhishek Swarup

  • Sales order not shown in MD04 and product view

    Hi All,
    Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
    I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
    Regards,
    Prabhu

    Hi,
    In the sales order, please check the item category in the schedule lines.
    If the item category is CN, then you cannot see the requirements in MD04.
    The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category  in the sales order became CN.
    Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
    You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
    Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
    Regards,

  • Deleted Sales Orders not Reflecting in BI

    Dear Experts,
    When ever my customer deletes a SO(Sales Order) in R/3, the reverse posting or deleted SO is not reflecting in BI. The Data source used is 2LIS_11_VAHDR. We are deleting the relavent SO in BW manually. But our customer wants to automate it.
    Can any one suggest any setting in R/3 or BI for the changes to reflect?
    Plz help.

    Hi Raj,
    check your data source support for reverse posting.
    go to rsa6 select your data sourceselect changecheck weather the sales order field is selected for inversion. if it not do it.
    and also check this condition
    If the option Field recognized only in Customer Exit is chosen for the field, this field is not inverted. You cannot activate or deactivate inversion if this option is set.
    hope this will give u some idea
    regards
    harikrishna N

  • Sales order not appearing in MD04

    Hi,
    Sales order is not appearing in MD04 screen some times. I tried with different MRP types and Different strategies, But I could not found the solution.
    Thanks in advance

    Hi Bhagavan
    1) Please check the Item Ctaegory of the sales order that you created
    Is it TAN (or) TAS , Please check & revert
    2)Also, check the material & plant which the sales Order is created, any MRP AREAS that you have in your Plant ?
    3)In MD04, Check the following
    Material :
    MRP AREA :
    Plant :
    Check that you sleeted all the above points Correctly ?
    Revert for any other info.
    Regards
    BRSR

  • Sales Order not updated in MD04

    Dear Gurus
    Sales order is not getting updated in MD 04 for few Materials and those materials are not relevant for MRP.
    Kindly help me in this regard
    Thnx
    MK

    This may be due to schedule line category in the sales order ->item level.
    In t.code VA03, enter the sales order number. Then highlight line item and click on schedule lines for items button on the bottom. Find the schedule line category derived for the item under schedule line category column.
    Then go to t.code VOV6. Select the schedule line that you found in the sales order and click on details button. Under transaction flow, you will find Req/Assembly field, which may NOT be checked in your case. If this field is not checked, then the requirement will not be passed to MRP.
    If this is checked and still you dont see the details in MD04, then run report SDRQCR21 in SA38 and check again.
    Regards,

  • Sales order not reflecting in the stock reqmt list

    we have a MTO scenario.after the sales order is created we are not able to see the sales order in the stock requirement list.kindly please help.

    Hi
    following are the reason
    1) Check requirement type in sale order and strategy group in material master.
    2)if reason for rejection is activated  in sales order.
    3) cancel the sale order
    4) schedule line category should be  CP in sales order
    Edited by: surendra patil on Dec 29, 2008 7:30 AM
    Edited by: surendra patil on Dec 29, 2008 7:33 AM

  • Sales Order not showing in MD04

    What could be the possible reasons?
    The order is for a procurement type E HALB with strategy 40.

    Check:
    1. If reason of rejection is maintained in SO, if yes, then check with the concerned sales personnel why it is there
    2. In schedule line tab for that material, check to see if schedule line catg. is CP (if not, check with sales personnel as to why they do not want to transfer it to MRP)
    3. Check if the SO has been delivered completely
    4. Also check if there is some credit block on the SO.
    If the above does not resolve, then revert with more details.

  • Sales order is seen in MD04 but not on backorder report CO06.

    Hello friends,
    I went through several threads on backorder but couldn't find answers to my query.  Kindly help.  Thanks.
    - Are there any alternative to doing backorder processing ?
    - Can backorder processing be automated ?  How ?  What transaction ?
    - An MTO sales order is seen on MD04 but not seen in backorder processing (I think CO06) – so what could be the reasons ?
    - I believe SAP recommends one report to be run regularly to delete old/open sales orders – what is that and why it needs to be run ?  Does it have any affect on backorder processing ?
    - Chetan.

    Hi Chetan,
      Back orders are generally updated with the help of transaction V_V2.
      Let's say that you were supposed to deliver one order on 25.06.2007 but the delivery has not been created yet.
      Then V_V2 would determine the new schedule line date for this particular order along with the quantity which can be delivered on that particular date.
      You can automate the process by just putting the transaction V_V2 for background scheduling.This background scheduling can be done with the help of transaction SM36.
    Reward points if it helps.
    Regards
    Karan

  • Sales Order not Valid During Vendor Clearing

    Hi,
    When I'm clearing vendor open items (both normal & special GL transactions) i'm getting an error message "Sales Order not Valid". How do I correct this error?
    Thanks,
    Chaikaru

    Hi ,
    As you're saying that the order got saved already with confirmation, you can try re-doing the ATP check on the SO item. If the order item is not present in SCM, system will throw an error with the message "APO: Order Doesn't exist".
    You have mentioned that CCR did not detect the inconsistency, have you by any chance selected check box "use VBBE table"?
    You can try resending all the Sales Orders to SCM by running Initial Supply (report RIMODINI) for Sales Order Integration Model., monitor the queues in /SAPAPO/CQ. Alternatively, If you're using Inbound queues in SCM, you can only check SMQ2 in SCM and if you're using Outbound queues in ECC, check SMQ1 in ECC to monitor the queus.
    regards,
    Mohan

  • What setting to mandate that invoice is created based on sales order NOT...

    Hi,everyone
    Could you tell me the detailed configuration  to mandate that invoice is created based on sales order NOT delivery documents.
    Additionaly, I need to define this rule at headquarter and apply it all lower-level companies.  how to do it.
    thanks you very much

    Dear Humility,
    Could you tell me the detailed configuration to mandate that invoice is created based on sales order NOT delivery documents.
    This is quite possible through copy control settings between sales order and billing document
    In standard billing type F1 will billed with reference to the sales order OR,so you can copy those settings then rename to your document types and itemcategory.
    Go to VTFA transaction click n change icon then select billing type F1 and order type OR then click on Copy As icon (F6)and change the document types(maintain your docuemnt types).
    To copy item level settings
    Now you come back to initial screen agin you select billing type F1 and order type OR then click on item here you select standard item category then click on Copy as Icon (F6) here you maintain your itemcategory.
    Note:- Don't change the satndard settings you just copy
    Additionaly, I need to define this rule at headquarter and apply it all lower-level companies. how to do it.
    For this you can take help of your BASIS people they will full fill with the roles and authorisation settings.
    I hope this will help you,
    Regards,
    Murali.

  • Storage location entry in ASN is not reflected in MD04 screen

    Hi Gurus,
    We are using scheduling agreements with confirmations (ASN) . For some business reason we change the storage in inbound delivery created against the SA . However change effect of storage location  is not reflected in MD04 .
    In MD04 screen storage location is getting defaulted from the scheduling agreement .
    Why the system is not considering the storage location from the inbound delivery ?
    Thanks in advance

    Thanks for the reply.
    Indeed it will appear in MD04 if you change in SA. However I don`t want do that , in certain cases only I want change at IBD level which should reflect in MD04. Is there a way to achieve this ?
    Thanks in advance

  • VERSION FIELD FROM SALES ORDER NOT APPEARING IN COOIS REPORT

    DEAR ALL,
      I am working on make to order scenario. Version field from sales order not updated when im taking MRP Run for specific Sales order in COOIS Report. But when iam creating production order with T. COde CO08 field getting updated. Its very important to get vrsion field as we have maintain old sales order No. in same. How this problem will get resolved?
    Regards
    Atul

    Atul,
    "MRP run" does not normally create production orders, MRP creates Planned orders.  Planned orders do not contain Sales order version.   I have never used this field before, but I would not be surprised if the behavior you are describing is 'standard'.  When you create a production order using CO08, you are creating a 'production order with reference to a Sales order' (which contains Sales Version).  When you create a production order using, say, CO40 or CO41, or using a program such as PPBICO40 in Batch, you are creating a 'production order with reference to a Planned order', (which does not contain version).
    If it is imperative that you have the Sales Order version number in all production orders, you could see if Planning Strategy 82 (Assemble to order) production orders contain the data you seek.  Otherwise, I am afraid you will have to have your ABAPers write some custom code to update this field in the production order.
    Another way to get sales order data into the production order, that does NOT require custom code, is by using Item Texts in the Sales order.  Any text placed in the Sales Order Item Text Field Production Memo (Text ID 0006) can be configured to be duplicated automatically in the Production order in an MTO environment.  Production Memo then displays as another Tab in CO02.
    Regards,
    DB49

  • Sales orders not appearing MD04

    Hi
    when we create the sales orders which are relevent for MRP i. e with scehedule line category CP, It should definitely appear in MD04 immediately.
    oflate I am finding , there is a time lag ,between order creation time & time of appearing in MD04, of 10 /15 hrs.
    I have never encountered such a situation earlier.
    This is happening at times.
    I am not finding any OSS notes pertaining to this scenario.
    Can any one though some lighton this tell me what could be the reason.
    Regards
    YMREDDY

    Hi,
    The Sales requirements are stored in a table VBBE and VBBS, when order is created or changed. The MD04 read the records from the above tables and display the records. I don't think there is a definite answer for this problem, except check your config. and check your user exits. The problems will occure when you have more customization to your Sales order  process.
    If you are able to reproduce the problem then it is easy to track the issue by activating and inactivateing the user exits.
    There is a program SDRQCR21 provided by SAP which fixes the sales requirement descripancies. Take a look at the Note: 25444
    Thanks
    balu

Maybe you are looking for