Sales Orders Not Replicating from CRM 2007 to ECC 6.0

I have been able to successfully replicate my Customers from ECC to CRM. When attempting to replicate a Sales Order from CRM into ECC, the BDoc shows as "Confirmed (fully processed)" in SMW01. When I look at the list of receivers, it shows my ECC system, with a state of "Processed". However, when I look at the Error Segments on the BDoc, I have two events:
1. No Upload into R/3
2. R/3 Adapter is Called
Any thoughts on what I am missing?
Thanks!

MCG,
Thanks for the quick reply. Yes, I have a publication of "All Business Transactions (MESG)" with a subscription of my ECC system. The BDocs never make it into the Outbound queue. I purposely stopped the outbound queue to see if it would show-up ... it never comes in.
Thanks!

Similar Messages

  • Configuration is not replicated from CRM to ECC for configurable product

    Hi,
    We have some materials in the system for which the configuration is not replicated from CRM to ECC.
    We create a quotation in CRM and configure it. In CRM,  the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
    Please find below finding
    1. If the same material is created in another plant/company code, the configuration is replicated properly.
    2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC),  it is properly exploded and complete.
    3. variant prices are replicated properly even though components are not replicated.
    We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
    Please  advise.
    Thx.

    the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
    My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

  • What are the steps to send sales order custom field from CRM to ECC

    Hi Xperts,
      We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
    We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
    Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
    Thanks in Advance.

    Hi Anjaneyulu,
    We are faced with a similar situation as you.
    Here is our scenario with the steps that we performed so far:
    1.  We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
         The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
    2.  On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
    3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
    4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
    5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
    Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
    In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
    Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
    Could you please give us the steps that you have done.

  • Business Partner with Classification not replicated from CRM to ECC

    Dear CRM gurus,
    We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
    When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
    In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
    Desperately need help! Points will be generously rewarded.

    Hi guys,
    most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
    One standard stumbling block is the field "language key" under communication data....
    I hope that's what is causing the problem
    cheers
    Jens

  • Sales orders not replicating to R/3

    Hi Experts,
                    I created a sales order in CRM, and then checked for it in R/3(VA03). In R/3 it states the sales order is not present in the database or is being archived. I checked the Bdoc's. The sales order is strucked in Bdoc's. What are the possible steps to be followed for sales order replication.
          Waiting for Valuable Suggestions.
    Thank You

    The possible things that you should do for sales order replication are :-
    1) Pide settings:-Maintain the relevent account groups for BPs
    2) The number ranges  for sales order should be maintained properly.
    3) Item category should be maintained  for the products.
    4) Partner funcions should be determined properly
    5 ) Check that all the fields that you use  while creating order in CRM should be mapped at R/3 for replication.
    You can also check C-03_BB_configguide for details.
    Hope this helps.
    Regards
    Sanjib

  • Line Items in Sales Order not Replicated

    Hi
    1. We created an order in CRM with 10 line items ( all are same service items) and this order is replicated to R/3.
    2. We added to the same order 5 more same line items and saved but thid items are not replicted.
    Please suugest me how to trance it.
    Thanks and Regards
    Masthan

    Hi,
    As per my knowledge is if in case u want to create or add
    new line items. use CRMD_ORDER and next open the
    business transaction and enter the particular Transaction
    number. And next go to the products tab and add the new
    products and maintain conditions and prices etc., next save.
    you will get New Transaction Number. 
    Then after XI people will give the IDOC number. then after
    you use transacation code(we19 or we39) and enter u will get
    new screen display. Here you can enter the IDOC number then
    execute. You will get Line Numbers.
    ok

  • Payment card details not replicated from CRM to ECC

    Hello
    We are creating BP in CRM which replicates into ECC. In BP, we are maintaining Payment cards. But, while replicating to ECC, this Payment card details are not replicating to ECC.
    The data is present in the BDoc.
    Please help!!
    Regards,
    Debolina

    Hi Debolina,
    Can you please share the solution. I have the similar requirement.
    Regards,
    Vaibhav

  • CRM 7.0 Contact person in order not replicated to R/3

    Hello all,
    I am currently facing issue with contact persons in CRM orders. There are several partners in the CRM order. Standard ones like ship-to party is replicated to R/3; employee roles are also replicated into R/3 within an order; contact persons (no matter if standard or Z) are not replicated from CRM order to R/3. There is neither no error message in BDOC nor in order.
    Partners are set correctly for mapping between R/3 and CRM (including Z partners) -
    tables CRMPARNR (R/3) and table CRMM_BUT_CONTNO (CRM) checked; GUIDs are there
    Users do change these contact persons manually sometimes.
    If order changed in ERP - including contact persons adding/changing - all partner roles are transfered to CRM for an order correctly.
    Any ideas??
    Thanks for your help
    Radim

    Hello,
    there is an important GUID that need to be determine, the contact persons in my case need to selected via partner determination otherwise the partner gets deleted in R/3. The determination is creating the relation to the partner which is transfered to R/3 and can be checked in the BDoc. This has solved the issue

  • Sales Orders created in IC webclient are not replecated from CRM to R/3

    Hi All,
    The problem started when we modified the components in CRMV_GENIL transaction. We created a new component ZBT by copying the existing BT. The new component was added to our component set.
    What is happening now is that any sales order we create from IC Web is not replicating to R/3. They get the system status ‘Distribution lock’ and remain in CRM.  The orders being created from CRMD_ORDER are being replicated, The natural approach was to check the SMW01 queues. All BDOCS are in status F02 or completely processed.
    The only difference I could see was when I took the messages associated with the BDOCs. The once which did not replicate had the extra message ‘No upload to R/3’ while the replicated ones only had the ‘R/3 Adapter called’ message.
    Can you tell me if I need to make any changes in configuration elsewhere in the configuration? It would be a big help.
    Regards
      Raghu

    Hi..
    If the Order is available in R/3. .then its is success replication.. The Document Flow of the CRM order from CRM --> R/3 the reason u get this message  "BUS2032 with key 0065000048 cannot be displayed in system R/3 Logical System Client 300" is due to the RFCUSER is set as communication type.
    if the type is set to Dialog in the tcode SU01, then u won't get this message..
    But this is not recommended.. The RFCUSER need to be as Communication
    Is this helpful..?

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • Sales order not set to complete status in CRM from R/3

    Hi Gurus,
    I need some advice. We are working on CRM 2007 and the issue we are facing is....when a sales order is created in CRM it gets successfully copied over to R/3. It is then processed in R/3 and is then set to a Completed status. But this status is never updated across to the original sales order in CRM which hence stays in Incomplete status...
    We know this is a config issue and we have also looked at program "CRM_SET_STATUS_COMPLETED" but can anyone point us where exactly we need to change the configuration.
    Thanks,
    Sushant.

    Hi sushant,
    When the R/3 Order status is set to 'Completed' then the system status for order in CRM system is automatically changed to 'Completed'.
    So firstly check whether the User status ('Completed')in SAP CRM has the Business transaction event set to 'FINI'. So when the system status is set to 'Completed' the user status will also change to 'Completed.'
    Secondly even check what are the statuses of item in the Orders.
    regards,
    Anubhav

  • Sales Order replication issue from SAP CRM  (7.0) to ECC

    Hi,
    I have issue in replicating the sales order from CRM to ECC below are the issue details ...
    Issue:
    Sales Order is created in CRM and Mbdoc is generated with status:001 (Yellow state),Order is not replicated to ECC system.
    I am trying to Replicate the sales Order1.Created Trnascation type: ZLS1 in CRM
    2.Number range assigned as Internal in CRM and External number range in ECC
    3.Item categories has been defined in Both the system.
    4.SMOEAC settings are completed successfully.
    5.Maintained table:SMOFPARSFAin both systems.
    Checked Couple of things:
    1.No items found in SMQ1 (Out bound queue ) in CRM
    2.Checked in SMQS,none of the entries found.
    Please let me know if i missed any of the settings to replicate the sales OrderPlease help us on this regards ASAP
    Thnaks.
    CRM Consultant.

    >
    Robert Kunstelj wrote:
    > Check in status shema of that order that it doesn't block distribution to R3.
    >
    > Also check that you don't have any fillters set in R3AC1.
    >
    > And also tell me, do you see in SMW01 CSA mbdoc for that orders? If yes, are they in red state and when you select one and click on button Show bdoc message extended data, do you get structure or not?
    >
    > Regards.
    Hello Robert,
    Here is the answers for the questions raised...
    1. I checked status schema ,understand distribution status is " To be distributed " in the sales order in CRM
    2.In R3ac1 ,standard document "SALESDOCUMENT " doesn't have the any filter setttings related to my transaction type.
    3.Mbdoc (Notification ) is generated in SMW01 with status " 001 " (Yello state),failed to reprocess the Bdocs.I coudn't able to find the Outbound queue in CRM for the corresponding order in CRM.
    4.I can see the Bdoc structure in the extended data in SMW01.
    Thanks.
    Sathya.

  • Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC

    Hi All,
    When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
    I have requirement to code the logic during the process, when sales order is replicated into ECC.
    So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
    If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
    Please help me on this.

    please check this link
    keremgomi=wordpress=com
    Rgds
    Raj

  • Does MV45AFZZ trigger when CRM sales order is replicated into ECC

    Hi All,
    When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
    I have requirement to code the logic during the process, when sales order is replicated into ECC.
    So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
    If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
    Please help me on this.

    Hi,
    I guess it should. Just put external break point (RFC userid with debuger rights) and see.
    Thanks,
    Nilesh P.

  • Business partner(employee) is not replicated from ECC to CRM

    The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

    Hi Pragnya,
    This is the case where at the time of creation of BP there was some issue with replication.
    The BP itself is not there in CRM or only the changes are not reflected?
    In such scenarios, perform following steps for successful replication:
    1. Go to TCode: CRMM_BUPA_MAP
    2. Enter the BP no. {initially it says it does not exist}
    3. Enter ERP customer no. and press enter, the BP GUID gets filled
    4. Click on "Gather Information about customer" [you can see the status of the object]
    5. Now again enter the BP no. -> The customer is available in CRM now.
    Regards,
    Swagi

Maybe you are looking for