Sales orders ONLY in APO and not in R/3

Dear Friends,
I have this peculiar but very critical problem wherein:
APO creates an extra schedule line to an ALREADY EXISTING sales order only in APO with a quantity in decimals like 130.320 PCs or whatever. Also, important to note is that this line has a required date very much in the future starting from 12-2009. Also, this sales order schedule line is non existent in R/3!
- I have checked the R/3 SD tables but nothing which relates to this qty.
- I have checked the sales order changes, but nothing in the history which suggests that someone might have changed it.
- I checked the UOM both in R/3 & APO but nothing.
Now, the problem is that:
How & what created this sales order?
If it is in APO, then y it isnt being sent to R/3 like all the other normal sales orders?
Most critical: APO sees this reqt & automatically creates a planned order (bckgrnd) which is then sent to R/3 as a recpt!!
Thanks in advance !

Team Eusap,
You say you ran LC consistency (which would be /SAPAPO/OM17). Did you also run CCR as I mentioned earlier?
Although there are no Queue errors, it is possible that someone has deleted the item from the queue. So, continue.
You can try to delete the order in APO using program /SAPAPO/SDORDER_DEL. Select Delete on database tab, deselect test, select the appropriate product/location(S). Select 'without check'. Select both boxes in Additional functions. Since you are not using GATP, you are not using allocations, but it is OK to select these items too. Execute. Stay away from the 'Delete all DB Sales order Data" tab!, or you may have to re-cif all your orders across. Now redo your LC consistency.
As far as your models are concerned, you need to assure yourself that there are no ATP (transactional, not material independent) models open. Use CFM5 to search.
As for the material independent CIF, it is a good idea to inactivate this model after the initial transfer. If you ever do any ATP config within APO, this model can overwrite some of the settings you created in APO. Usually this is undesirable.
Let me know if any of the above steps allow you to delete the APO order you don't want.
Rgds,
DB49

Similar Messages

How to link Sales Order with Service Contract and then with Install Base?

Hi Friends,
1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
3) How can we create AR invoice from Service Contract?
Please let me know if anyone has idea on this.
Thanks in Adavance,
Vara

Dear Sid,
Thanks for your promt response.
Let me explain you what I did.
1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
Here I have few doubts:
1) Are the AR invoice and Service Contract Billing Invoices same?
2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
Thank you so much for your helpful answers.
Regards,
Vara

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

Problem about sales order stock stock transfer and batch determination

Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.

I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.

Runtime error while creating sales order in AFS(Apperal and Footware Sol)

Hi everybody,
While creating a sales order in AFS(Apperal and Footware Solutions) i am getting runtime error.In the error the error description is "CIF_SNPGRPID is unknown". Can anybody tell me how i can resolve this.And i am getting this runtime error when i am using AFS material only.When i am using standard material i am able to create the sales order.
Thanks&Regards,
Rambhupal

Hi Rambhupal,
Check all the conditions related to Prerequisites for AFS material.
Go to SM21 transaction code and analyze the details.
Bye,
Muralidhara

I need a Badi that is triggered when saving Sales order in both Va01 and Va

Hi
I need a Badi that is triggered when saving Sales order in both Va01 and Va02
I tried with the following BADI's
BADI : BADI_SD_SALES
Implementation : /BEV1/SR_SALES_ORD_1
Method SAVE_DOCUMENT
Now when i want to put my peice of code in this (SAVE_DOCUMENT) method.
It is asking for Access key. Which i do not have.
Should i create a implementation and then create a method and then put my code there?
Anybody plz help.

You will probably not find a BADI to suit your needs. However if you look at include program MV45AFZZ you should find two subroutines: USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT. You can put the code you need directly into these subroutines. If these have not been changed yet on your system, you will need an access key to make these changes.
Please read the documentation in the header of the subroutines for furtner information on when they are called.
Best Regards,
Chris H.

Price Update on Sales Order - After partial delivery and invoice

Hi all,
I have created a sales order of 10 tons and a despatch advice of 5 tons and invoice of 5 tons. Now when i want to update price on sales order then system give me "Update" button in grey.
My client wants to update price on those sales orders too which are partially despatched. Is that possible to do this in SAP? If yes then how?
Please respond.
Best Regards,
AI.

Hi
I can suggest 2 alternatives .
!.Create a debit memo request sothat prices can be updated along with other details and changes can be tracked.
For voluminous data you can create a BAPI for Sales order creation and give related paramenters.
2. Create a BDC and update pricies for all partially processed sales order in KONV table using KNUMV .
This a bit tricky ,as there are chances of dumps and sensetive data becomes unstable ,also when you change by updating condition ,you dont get earlier prices and change is not controlled and almost irreversible.
I suggest first approach ,with better tracking , analysis and less disturbance to standard system.
Check business object Sales Order
Function module : BAPI_SALESORDER_CREATEFROMDAT1
You can take help of ABAP developer for creating BAPI.
I hope this helps
Regards
Mandar

Sales Order update in APO

Hi,
We have a z-program in ECC which is triggered once sales order is saved. As of now we have maintained a nominal delay (30 secs) in the program to take into account sales order update to APO (as we are fetching some key information from APO based on SO update to APO).
So instead of maintaing the delay in the program, is it possible to check that the sales order specific CIF queue is processed successfully and then that is taken as a trigger point to execute the program in ECC.
Regards,
YR

Hi Babu,
thanks for your reply...
One last query before I close this thread.
Can this queue processing in table TRFCQIN be mapped as a 'trigger event' in case it is successful to initiate the program on ECC side with reference to the specific sales order ?
YR

Status : Being Processed in Sales Order after the Delivery and Billing also

Hi All,
For one Sales Order........ Delivery and Billing are over but it shows
In the Sales Order> Header level>Status bar>Overall Status>Being Processed.
In Document Flow:
Sales Order xxxxxxxxx : Being Processed.
Delivery xxxxxxxxxxxx : Completed.
Billing xxxxxxxxxxxxx : Completed.
Functionally we checked everything......but through technically we can solve the issue or not
Pls help me with some solutions.
Advanced Thanks.
Diwakar Reddy.
[email protected]

Hi,
This generally happens if the sales order is for a quantity greater than the quantity delivered.
SAP treats the sales order as still open and delivery of the remaining quantity is possible through that sales order itself. So the status is shown as "Being Processed".
If you want to see the status as "Completed" then you need to cancell the remaining open items in that sales order. Automatically the status will change to "COMPLETE"
Hope this solves your querry.
Regards,
Anirban

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

Airport utility only shows disc and not airplay

airport utility only shows disc and not airplay

Actually......IF......one is using an older 5.x version of AirPort Utility......AND.....an AirPort Express, a Music icon is displayed at the top of the screen. If you click the Music icon, there are settings to enable AirPlay and establish a password for the service.
The newer Mac 6.x and iPad and iPhone versions of AirPort Utility automatically enable AirPlay, but display no settings for this.
Since ralphington is using Mavericks (10.9.4), there are no controls for AirPlay displayed in his version of AirPort Utility.

Subsinvprocess in the sales order header --- billing tab and in the custom

Hello All
there is a field SubsInvProcess in sales order header - billing- tab and in the customer master - billing tab
what was the functionality of this field. I never worked with it
kindly help on this one.
Thanks,
prasad

Dear Vara prasad,
The value of this field is if you want to print the invoices that are being posted manually you can activate this field.
It will be directly proposed from customer master to sales document, where you can change.
Please let me know if you want any further clarifications.
Please go through this thread also for further reference.
Clarification for usage of Subsequent Invoice Processing in Customer Master
Thanks&Regards
Raghu.k

I am able to search only by text and not by Key in filter.

We have a variable x which has bex properties in the infoobject level to
1.display: Key and Text
2.text type: long text
3.Query def filter value selection: Only values in infoprovider
4.Query Exe filter value selection: Only posted values for navigation.
in the Query designer to the object we have the same properties for 1 and 2 as above.
 On execueting the report in web, In the variable screen for x we can search for both Key and text. (we have two radio buttons for Key and text),
 Whereas in the result area for the filter for x I am able to search only by text and not by Key. I want to search by both Key and text in filter screen.
Can u suggest suitable solution for this ASAP.

I have been working on a similar problem and have found that it depends on what kind of InfoProvider you are using.
If you are using an InfoCube, the setting that seems to control this is on the maintenance screen (Admin Workbench -> {InfoProvider to be edited} -> Change -> Extras -> Structur-Specific InfoObject Properties. If you want the key and text to display on the variables screen (which you already have), make sure the 'Display' is set to "Key and Text". If you want key and text to display on the filter screen, make sure the 'F4 Query' is set to "Values in Master Data Table". (You may also have to set the characteristic to display key and text in the query, but it sounds like you already have done this.)
For an ODS, the settings are the same, but the path to get there is different. Go to Admin Workbench -> {ODS to be edited} -> Change -> {InfoObject to be edited} -> Right-click -> ODS-object Specific Properties. Same settings as above after this.
For a MultiProvider, I found that the settings on the InfoObject itself seemed to control the display on the Web, so I ended up setting: Display = "Key and Text"; Query Def Filter Value Selection = "Values in Master Data Table"; and Query Exe Filter Value Selection = "Values in Master Data Table". That may be a bit of overkill, but I wanted to be sure to get both key and text in all situations.
I also found that the settings for navigational attributes (e.g., 0PLANT__0REGION) for any kind of InfoProvider must be set at the InfoObject level (e.g., 0REGION), as above.
Even with all of this, I still have a couple of InfoObjects left that I can't get to display both key and text for some unknown reason.
Hope this helps...
Bob

What do I convert to if I only have OpenOffice and not Word?

What do I convert my pdf files to if I only have OpenOffice and not Word?

Hi sulezyf,
OpenOffice and Word documents have the same extension i.e .doc
You can convert the pdf to .doc format.

Sales order stock 110000193 000050 does not exist

Hi Friends,
I have a problam in Confirmation of Production order against sales order. Every time I confirm the production order system give an error message Sales order stock 110000193 000050 does not exist.
where I check the material in mb52 transaction , the stock shows on that material.
Please give solution .
thanks in advance.
Ajit Sharma

Hi,
It seems you have activated back flush some or all the components.
In MTOscenario, system looks for sales order stock for all the components.
Since sales order stock is not available with your system the message.
Try with movement type 412E in MB1b to transfer components from U/R to sales order stock.system propmts you to give sales order number Pl. provide there & carry out transactuion.
Then the system will pick up the stock & post.
Regards,
R.Brahmankar

Sales orders ONLY in APO and not in R/3

Similar Messages

Maybe you are looking for