Sales org doubts

Hi Gurus,
Could any one help me where exactly if we maintained the Address in Sales Organisation and shipping point will Impact. Where can i see if i maintained the address. Will it appear in any docs e.g. PO, billing doc, Sale Order ?
Cheers
Edie
Edited by: Edie Edie on Sep 15, 2008 5:04 AM

hi
check this link
Re: Address in Sales Organisation
regards
ankit

Similar Messages

Sales org roll out doubt

Dear Peers,
My scenario: CRM roll out for DE.
first CRM was implmented in US and the rollout is for DE. In R3 customer no:10 has assigned to 4 diff sales org included US and DE. Now i started the Initial load for the DE customers from R3 to CRM and the error i got is SYSFAIL and the detail is "Customer 10 is already assigned to a Business partner" and BUPA_MW_EXCHANGE103.
in filter settings R3AC1 i am maintinaing KNVV and KNVP tables.
my question is if do initial load for roll out , only aditional information i.e. Sales org details can be updated for the already existing customer in CRM?
i.e.in my scenario the customer 10 is already in CRM now only the DE sales org has to update for the customer 10. in future if we go for rollout of another country that sales org details has to be updated to the existing CRM customer will it be possible?
Thanks,
K
Edited by: kesava9 on Dec 13, 2010 2:52 PM

Hi,
Normally we only do Initial download once when we set up the system for the first time. after that all changes should be downloaded automatically needless of the sales org.
Now I would recommend to do a request download instead of an initial download, since updates for that customer will be updated automatically for each rollout scenario if the customer is already there. if the customer is not there it would create a customer and updates the sales org details as well.
Don't know if i answer your question correctly.
Hopeit helps.
Regards
Sidd

Sales Org assign to Plant

Hello Everyone,
I would need your help to confirm the following is true or clarify some doubts:
1. I understand that Sales Org (SOrg) is assigned to Plant , thus : Sorg := Plant
2. Does this also Implies : SOrg + Distr Channel := Plant? Not necessary right? For this case, its not true / an invalid assignment right?
3. Plant is assigned to Sales Org + Distr Channel. Is it implicit that the Reverse is true? Is it implicit that Always the reverse is true, in general, for Any other organizational unit assignment relationships?
I believe that Sales Org := Plant and Plant := Sales org + Distr Channel and the reverse of each of both relationships are not true. Please confirm.
4. Sales Org is Assigned to Plant but Plant is not Assigned to Sales Org right? Plant is also higher level in the organizational structure than Sales Org right?
Thanks.
Sincerely
Bass
SD Newbie
Edited by: Bass Aton on Jan 2, 2011 5:20 PM

Hi,
I guess this will help you
How to Configure a New Plant in SAP?
Plant 0001 is the SAP defaults provide for your reference.
OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes) Most company take the SAP recommended choice - Value Material Stock at Plant level Value Material Stock at Plant or Company Level If you valuate material stocks at plant level, the plant is the valuation area. If you valuate material stocks at company code level, the company code is the valuation area. The decision you make applies to the whole client.
OX10 - Create / Change / View Plants
OVXB - Create / Change / View Division
OX18 - Assign Plant to company code e.g. 0001 - 0001 - All Plants Px1 - Plant Px1 Px2 u2013 Plant Px2
OX19 - Assignment of company code to the Controlling Area
OB38 - Assign company code to Credit Control Area
OMJ7 - Assign business area to Plant/Valuation area and division e.g. Plant Px1 - Business Area Bx1 Bx2 Assign Valuation area to the Business Area .e.g. Valuation area Vx1 - Business Area Bx1 Business Area Bx2
OMS0 - Assign Factory Calendar to the Plant and Business Area The plant plays an important role in the following areas: If you want to create by copying from existing plant: 1. Copy existing plant A to new plant B. All of plant Au2019s data in throughout the IMG will be created/copied for plant B. In some cases with plant A data that is not desired. In step 3 you must go through and correct invalid entries 2. Correct address information 3. Correct data copied to plant B as plant A (a) In Sales and Distribution -> Shipping -> Picking -> Determine Picking Location -> Assign Picking Locations (OVL3), delete entry where Shipping Point = plant A and Plant = plant B and press save. (b) In Sales and Distribution -> Shipping -> Basic Shipping Functions -> Shipping Point Determination -> Assign shipping points u2013 wherever plant B is found the shipping point is plant A. This must be changed to plant B. (c) In Enterprise Structure -> Maintain Structure -> Assignment -> Sales and Distribution -> Assign shipping point to plant u2013 delete plant B shipping point from the plant A assignment. (d) In Enterprise Structure -> Maintain Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check shipping point u2013 copy shipping point plant A to shipping point plant B. Correct the description in the define section of this node. (e) In Sales and Distribution -> Shipping -> Picking -> Determine Picking Location -> Assign Picking Locations (OVL3), copy plant A entry to plant B entry, changing all data to plant B. (f) Check with Reorder buying group to determine MRP controllers for new plant. Remove plant A MRP controllers from plant B, and add controllers received from reorder buying group. IMG is Materials Management -> Consumption Based Planning -> Master Data -> Define MRP controllers (g) Define special procurement. IMG is Materials Management -> Consumption Based Planning -> Master Data -> Define special procurement type. (h) OMGN u2013 Assign customer in u201CSet up stock transport order u2013 [Plant]u201D. OMGN u2013 in u201CSet up stock transport order u2013 [Purchasing Document type]u201D; an entry was created for source plant B and plant A, this entry should have a UB order type and the check box should be off. Each plant needs a plant B UB entry created. (j) OMJ3 u2013 Delete incorrect entry in print parameters. Remove entry where plant = plant B & storage location = plant A. Create entry for plant B storage location B (k) Verify entry for new plant exists in OVLT picking output (l) Verify entry for new plant is correct in VP01 4. Manual configuration (a) Create plant customer number and assign to plant in OMGN. (b) OMJ3 u2013 set correct printer for plant B (c) OPK8 u2013 Set printer for plant for list LG01. This is for production orders. (d) Output determination OVLT (set printer), In addition to above, other changes based on customization in your installation needs to be done as well. Plants Definition : /NSPRO-IMG-Enterprise Structure-Definition-Logistic General-Define,copy,delete,check plant-Define Plant (In this, we are defining plants(s) under company which is defined earlier) /NSPRO-IMG-Enterprise Structure-Definition-Logistic General-Define,copy,delete,check plant- copy,delete,check plant-F6 to copy org. object from plant 0001 to defined plant(s). Storage Location : /NSPRO-IMG-Enterprise Structure-Definition-Materials Management-Maintain Storage Location-New Entries (Define required storage location(s) under different plant(s) ) /NSPRO-IMG-Enterprise Structure-Definition-Materials Management-Maintain Storage Location-Storage Location Description---- New Entries ( enter here addresses of each plants)
Thanks
Anil Hooda

Extend Material Master - Sales Org.

Hi,
I want to copy the material from one sales org. distribution channel to another sales org. distribution channel. My doubt is I want to use BAPI_MATERIAL_SAVEDATA. But how to use this??
Because that material is not present in the target sales org. distribution channel, so for that I have to copy all the views except sales view using BAPI_MATERIAL_GETALL then pass to BAPI_MATERIAL_SAVEDATA.
In this the problem is.. I have to map all the fields between these BAPI. So is there any easy way to do this?
Can anyone have similar requirement like this which can share??
Thanks,
Regards,
Jhings.
Edited by: Jhings on Mar 7, 2012 7:26 PM

Check these threads about the mandatory fields for your requirement:
BAPI_MATERIAL_SAVEDATA extend for new plant whats necessary
Extend material using bapi_material_savedata
About transfer the material data from BAPI_MATERIAL_GETALL to structures to be used on BAPI_MATERIAL_SAVEDATA, i think that MOVE field by field is the better way once there won't many fields to be populated.
Felipe

Comapny and sales org. settings

Hi Guys,
I am asked to change the country level and customer level settings.Please do guide me how do I proceede?
country level (YWBM)
Company- c720 sales org- s729
customer level (YWBC)
Company- C750 sales Org-s719
Regrads,
sneha

Hi,
you are alka or sneha.
I doubt.Please use your Id to post questns.
If i am wrong then Inconvenience regretted.
Regards,
Rahul

Two sales org in One company code

Hi all,
I know u can assign two or more sales org to one company code.
But if i have one common customer i.e one Customer No for both the Sales org's how do I differentiate which open items belong to which sales org when running my open item report in FI. The Sales org data is not transfered to the FI Posting. Is a user Exit and diff numer ranges in SD the only possibility? is there no sap Standard for this.
Thanks
dave

HI,
Are Business areas/Division of this customer same?
Reference number and allocation numbers are transferred to accounting documents.In customizing for copy control in billing,you can define which numbers will be copied as reference or allocation numbers.
Like - Sales order number,delivery number and Billing documents etc...
From sales order number you can know sales organization.
The reference number is in the header of the accounting document and is used for clearing.
The allocation number is in the customer line item and is used for sorting line numbers.
Vrajesh

FBL5N Cleared items not having the Sales org

Hi Guys,
In FBL5n open items having the Sales org (XREF1), when we are clearing the Documents, Sales org (XREF1) not coming to the cleared items.
Is any user exit or BADI to populate the value to Cleared items also?
Thanks
Gourisankar.

Hi
Cleared and open items should be the same, i.e open item are cleared item before clearing it.
So I suppose u mean the items of clearing document?
If it's so u should check your FI customizing because it should be a clearing rule, so perhaps it shlould be better to ask it to your FI consultant
Max

Mass change - Move existing sales orders from Sales org A to Sales org B

Good morning dear network,
am seeking for your guidance on one specific matter.
We are in the process of making changes to our billing / organisational structure (new sales orgs)
One of the challenges is that we need to move existing open sales orders from one sales org to another (new) sales org.
If all master records exist in the new sales org, is there a (technical) way of moving the existing sales orders from the current sales org into the new sales org, without having to replace each order individually ?
would welcome any suggestions.
Many thanks

I would recommend to close the existing open sale orders by assigning Reason for Rejection and create new sale orders in the newly created sales organisation.
This is due to the fact that you need to ensure each and field in the existing sale orders to match with the newly created sales organisation and it is bit time consuming.
Still if you prefer to what you had indicated, LSMW is the better option
thanks
G. Lakshmipathi

How to extend Sales org for a material being Changed

Hi Experts,
i need to extend sales org , distribution Channel for a material .
my table look like this and having 6 fields shown below
1 2 3 4 5 6
Sales org | Des | Distn Chnl | desc | Copy from So | Copy from Dstn Chnl
If the user enters the existing value in Copy From SO and Copy Fron Distn Chnl . Then i need to copy all the values corresponding to the Existing SO and Distrn Chnl to the Newly entered Sales Org .
the table im displaying in ALV , if user perss F4 in copy From SO and Copy From Distn , i need to show the existing values for the material being changed , this is working fine and i am able to get the existing values.
After user selects one of the existing value for SO and Distrn channel , i need to copy all the values to newly created So and distrn Chnl .
i dont know how to proceed . Please help me to solve this problem.
Thanks,
Shrikanth

You can use AET to extend the sales area data of BP. However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
Regards,
Shaik

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

Free Goods determination -acess sequence sales org/ plant/material

Hi
I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
can any one pl gide me how to solve this issue.
regards
shashi

Hi
Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
Now select the condition table and then click the node "Fields" on the left hand side of the screen.
It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
Now create the condition records and check in transaction by creating sales order. It shoudl work.
Hope this helps.
You can reward if it helps you

Free Goods Determination Based on Access Seq -Sales Org/DistCh/Cust/Materia

Dear All ,
Based on the requirement , I have configured 2 access seq for free goods determination.
1. Customer/Material
2. Sales org/DistCh/Customer / Material .
The free goods determination is working fine when i use the first access Seq - . Customer/Material and when i use the 2nd access seq - Sales org/DistCh/Customer / Material free goods determination is not happening for both inclusive and exclusive .
Can any one help me on this issue , as i am not able to identify the issue .
Thanks in advance for all the help.
Regards
Veera

Hi
Ceck this thread
Forum post in ERP SD Sales: New Access Sequence for Free Goods Determination
New Access Sequence for Free Goods Determination
But for you free goods determination should be happening at
Sales org/DistCh/Customer / Material without any problem
Make sure Sales org/DistCh/ maintained in VBN1 and what is falling in sales order are same
Regards
Raja

ABAB programm to copy material sales text from one sales org to another?

Hi all,
i'm searching for a ABAP programm to copy a material sales text from one sales org to another.
Has anybody seen something like that before or has anybody an idea how to do this?
Greetings & TIA
strobbel

@Narin
I've tried to execute both code now over a new programm in the se38 and i get a error message from the first code (http://www.sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm).
It's called:
"BAPI_MARC1" cannot be converted to a character-type field.
Could you help me to solve this?
Sorry but i'm an absolutely newbie in things like ABAP and so on ...

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

How to assign a Sales Org and Product group

all the config have been maintained (creating the hierarchies/categories, assign the set types to categories etc.) under IMG->Cross-Application Components->SAP Product.
Also assigned the set type for sales data/product group for category MAT_DIEN.
But the fields from these section are greyed out when I try creating a product (not able to assign the sales org, or product group)
Edited by: Agarwal Ameet on Aug 9, 2010 9:56 AM

Dear Sun,
One way is:
Maintain the required setting in T. Code: VKOA.
Another way is:
Create an Internal Order (T. Code: KO01) with required Field-entries in
Tab: Assignment --> Profit Center; and
Tab: Period-end Closing --> Cost Center ( or G/L account).
and attach it to your Sales Order.
To know more about Internal Order Processing, refer:
[Internal Order|http://help.sap.com/saphelp_erp2005vp/helpdata/en/a9/ab7f68414111d182b10000e829fbfe/frameset.htm]
Or, consult FI-Personnel at your end.
Best Regards,
Amit
Note: Also, sharing one document for knowledge-sake:
[Acct assignmt logic sales order proc.|http://www.saptechies.com/acct-assignmt-logic-sales-order-proc-rem/]

Sales org doubts

Similar Messages

Maybe you are looking for