Sales Requisition - Log after batch input session
Hi gurus,
I have a batch input sessions (recording) that allows me to close/terminate sales requisitions.
example:
clear g_session.
concatenate 'FECHA_OT' sy-uzeit(4) into g_session.
perform open_session using g_session.
loop at t_vbeln into wa_vbeln.
perform bdc_dynpro using 'SAPMV45A' '0102'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-VBELN'
wa_vbeln-vbeln.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'BABS'.
perform bdc_dynpro using 'SAPMV45A' '0250'.
perform bdc_field using 'BDC_OKCODE'
'SUEB'.
perform bdc_field using 'RV45A-S_ABGRU'
c_augru.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'SICH'.
perform insert_session using 'VA02'.
clear bdcdata. refresh bdcdata.
endloop.
perform close_session.
if sy-subrc = 0.
perform submit_session using g_session ' '.
endif.
Is it possible to write all the sales requisitions after this recording, for example the input data is this working area "wa_vbeln-vbeln.",
but in the end the log is:
BDC_OPEN_GROUP returncode: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
BDC_INSERT VA02 returncode: 0 RECORD: 0
Is it possible to show all the sales requisitions that are terminated?
Thanks in advance,
Mário.
1. Go to OBY6 and open company code 3000.
2. Copy the Chart of Account assigned to company 3000
3. Go to OBD4 and check all the account groups for copied COA
4. Now compare all the account groups for COA EKCA
5 Create the missing account groups for EKCA.
Unfortunately i did the same steps and now i am stuck with several errors that i need to keep pressing Enter until all are done.
So my question this time : " How can i get myself out of this instead click Enter for another 200 times. "
Similar Messages
-
Update error after all screens in Batch Input session is processed.
Hi,
I have a problem in processing the batch input session. The batch input session is calling F-02 to post less than 999 line items (around 700) to a single financial document. The batch session is expected to have an error because tax code is missing for some line items but even after the tax code is added manually onto the batch screen, the update error message still happened at the end of the process. In the log, it said "System error: Error when inserting table BSET". Same account has been used to post 10+ line items manually with F-02, no error occurred.
Does anyone have any idea what possible reason could cause the update error in updating the tax table?Hi Rob,
That is exactly what happened to us. We already had note 521481 in our system but we also have OSS 558288 in which causes our scenario not generating an error message but an update termination instead.
The other thing I found out is once tax code is entering in one of the line items, it will be copied to all the succeeding line items even for the accounts that does not require a tax code (i.e. posting without tax code allowed checked) which will significantly increase the amounts of data posted into BSET.
We fixed the issue by changing the BDC program so it will take out the auto-copied tax code from other line items. Issue is solved. Thank you. I also rewarded the points.
Minami -
SM35-Downloading the Logs for the Batch-Input Session
Hi Folks,
I have above 300 Batch-Input sessions imported, and most of them ended with errors, right now I am copying the errors from line to line into excel but this is time consuming. Does any body has a solution to download the logs created through the Batch-Input session into excel sheets. So that I can send through mail to my customer.
Any help would be appriciated.
Thanks in Advance.
Sanjeev.Okay... I have one more crude way of downloading the log but this will only work if you have the new abap debugger available..
1. Go to SM35
2. Select the session and Click the log button
3. Select the log you want to download, activate debugging and choose display
4. Put a breakpoint at the statement "Call screen 1400."
5. Select "Switch to New ABAP debugger" from the Debugging option in the toolbar
6. Go to the "Tables" tab and enter BDCLM and hit enter
7. Click the "Services of the tool" option. This is the last of the 6 buttons available on the Tables tab besides the table control which displays the contents of internal table BDCLM
8. Choose "Save to local file" option on the following popup
Pretty lengthy and cumbersome approach but I think this is the only option available if you cannot migrate the program to production.
-Kiran -
How to check whether a batch input session is completed in ABAP program
I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
USER MTAB-USERID
VIA JOB MTAB-GROUPID
NUMBER JNUMB
WITH QUEUE_ID EQ MTAB-QID
WITH MAPPE EQ MTAB-GROUPID
WITH MODUS EQ 'N'
WITH LOGALL EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
job which will get triggered
on event SAP_END_OF_JOB
ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
will do the FURTHER actions !
regards,
amit m. -
LSMW- Batch Input session getting error
Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
SavithaHi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk -
Batch input session to FB01 using standard program RFBIBL00
Hi all,
I am creating a batch input session using the standard program RFBIBL00 to simulate transaction FB01.
My problem is when I process the "batch input session" (using transaction SM35), this finish ok, but in the log I am retrieving the following message:
"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0300"
This is a success message and the document is created ok,and the field DMBTR is informed ok.
Has somebody some idea?.
Thanks so much in advance for any answer.Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
job which will get triggered
on event SAP_END_OF_JOB
ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
will do the FURTHER actions !
regards,
amit m. -
BDC Batch input session method
Hi ,
I am new to SAP progamming. Pls let me know the basics of BDC Batch Input session method and Call transaction method. I want to know the pros and cons of both methods with justification. Please help me in this regarding.Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Session method:
1. Data migration is done in two steps .. Generate session and Process session.
So resouces can be used efficiently. good for bulkdata migration.
2. Session method generates error log when u process a session.
3. No SY-SUBRC can be returned after each transaction is called.
4. Provides synchronous Updation only...
Call transaction method:
1. Data migration is done in single steps ..bcoz Transactions are called immediately after filling BDCDATA table. So good for small amount of data.
2. We have to collect error messages using BDCMSGCOLL Table
3. Returns SY-SUBRC and Messages ..after each Call Transaction..very useful feature for further processing based on the Status and Messages..
4. Supports Asynch or Synch Updation.
Example code for session method
Here is the porgram for Purchase order
REPORT zmm0069 NO STANDARD PAGE HEADING
MESSAGE-ID z0
LINE-SIZE 132
LINE-COUNT 65(2).
Internal Tables *
*Internal table for the purchasing info records fields.
DATA: BEGIN OF i_inforecord OCCURS 0,
matnr(18),
lifnr(10),
uom(3),
ekgrp(3),
planned_time(3),
under_tol(3),
over_tol(3),
qty(10),
price_cat(5),
inco(3),
designation(28),
netpr(13),
scale_qty1(10),
scale_pr1(13),
scale_qty2(10),
scale_pr2(13),
scale_qty3(13),
scale_pr3(10),
scale_qty4(13),
scale_pr4(10),
scale_qty5(13),
scale_pr5(10),
scale_qty6(13),
scale_pr6(10),
scale_qty7(13),
scale_pr7(10),
scale_qty8(13),
scale_pr8(10),
scale_qty9(13),
scale_pr9(10),
scale_qty10(13),
scale_pr10(10),
END OF i_inforecord.
Internal table for Old and New Vendor number
DATA : BEGIN OF i_lfb1 OCCURS 1,
lifnr(10),
altkn(10),
END OF i_lfb1.
Declare internal table for Call Transaction and BDC Session
DATA: i_bdc_table LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Global Variables *
DATA: g_counter(2) TYPE n,
g_field_name(18) TYPE c,
zc_yes TYPE syftype VALUE 'X'.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS: p_fname1 TYPE localfile .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETERS: p_rloc1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-003.
PARAMETERS p_group(12) OBLIGATORY DEFAULT 'ZPURCHINFO'.
SELECTION-SCREEN END OF BLOCK c.
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN END OF BLOCK a.
**WRITE the report header
TOP-OF-PAGE.
INCLUDE zheading.
Start of selection *
START-OF-SELECTION.
Load Input file
PERFORM f_load_input_file.
Create BDC records.
PERFORM create_bdc_records .
*& Form Create_BDC_records
Perform the BDC for the records in the internal table
FORM create_bdc_records .
IF NOT i_inforecord[] IS INITIAL.
Open BDC session
PERFORM open_bdc_session.
SELECT lifnr altkn FROM lfb1 INTO TABLE i_lfb1
FOR ALL ENTRIES IN i_inforecord
WHERE altkn = i_inforecord-lifnr.
Sorting the Internal table for better performance
SORT i_lfb1 BY altkn.
LOOP AT i_inforecord.
***Mapping Old Vendor number to the new Vendor number
READ TABLE i_lfb1 WITH KEY altkn = i_inforecord-lifnr BINARY
SEARCH.
IF sy-subrc EQ 0.
i_inforecord-lifnr = i_lfb1-lifnr.
ENDIF.
CLEAR i_bdc_table[].
PERFORM insert_screen_header.
call transaction 'ME11' using i_bdc_table
mode 'A'.
CLEAR i_bdc_table.
ENDLOOP.
CLEAR i_inforecord[].
PERFORM close_bdc_session.
Release the BDC sessions created
PERFORM release_bdc.
ENDIF.
ENDFORM. " open_group
*& Form bdc_dynpro_start
Start the screen for the transfer of fields
FORM bdc_dynpro_start USING p_g_program_1
p_g_screen.
CLEAR i_bdc_table.
i_bdc_table-program = p_g_program_1.
i_bdc_table-dynpro = p_g_screen.
i_bdc_table-dynbegin = 'X'.
APPEND i_bdc_table.
ENDFORM. " bdc_dynpro_start_start
*& Form bdc_insert_field
Insert field *
FORM bdc_insert_field USING f_name f_value.
IF f_value <> space.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDIF.
ENDFORM. "bdc_insert_field
*& Form open_bdc_session
Open a BDC session
FORM open_bdc_session .
Open BDC session and create and update records
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
DEST = FILLER8
group = p_group
HOLDDATE = FILLER8
keep = 'X'
user = sy-uname
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_bdc_session
*& Form insert_screen_header
Screen flow for the transfer of fields
FORM insert_screen_header .
First Screen 100
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
PERFORM bdc_insert_field USING:'BDC_CURSOR' 'EINA-LIFNR',
'BDC_OKCODE' '/00',
'EINA-LIFNR' i_inforecord-lifnr,
'EINA-MATNR' i_inforecord-matnr,
'EINE-EKORG' '1000',
'RM06I-NORMB' zc_yes.
Next Screen 101
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0101'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINA-MAHN1',
'BDC_OKCODE' '/00',
'EINA-MEINS' i_inforecord-uom.
*Next Screen 102
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0102'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINE-INCO2',
'EINE-APLFZ' i_inforecord-planned_time,
'EINE-EKGRP' i_inforecord-ekgrp,
'EINE-NORBM' i_inforecord-qty.
PERFORM bdc_insert USING 'EINE-UEBTK' ' '.
PERFORM bdc_insert_field USING:'EINE-PEINH' i_inforecord-scale_qty1,
'EINE-BPRME' i_inforecord-uom,
'EINE-UNTTO' '5',
'EINE-UEBTO' '25',
'EINE-MEPRF' i_inforecord-price_cat,
'EINE-NETPR' i_inforecord-netpr,
'EINE-INCO1' i_inforecord-inco,
'EINE-INCO2' i_inforecord-designation.
Checking for Scale quantities
IF i_inforecord-scale_qty2 = space.
PERFORM bdc_insert_field USING 'BDC_OKCODE' '=BU'.
PERFORM insert_bdc_new.
ELSE.
PERFORM bdc_insert_field USING 'BDC_OKCODE' '=KO'.
Next Screen 201
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'RV13A-DATAB',
'BDC_OKCODE' '=PSTF'.
Next Screen 201
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONP-KSCHL(01)',
'BDC_OKCODE' '=PSTF',
'RV130-SELKZ(01)' zc_yes.
LAST SCREEN 303
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0303'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONM-KBETR(03)',
'BDC_OKCODE' '=SICH'.
Counter to Loop the Item level entry
g_counter = 0.
PERFORM scale_entry USING i_inforecord-scale_qty2
i_inforecord-scale_pr2.
PERFORM scale_entry USING i_inforecord-scale_qty3
i_inforecord-scale_pr3.
PERFORM scale_entry USING i_inforecord-scale_qty4
i_inforecord-scale_pr4.
PERFORM scale_entry USING i_inforecord-scale_qty5
i_inforecord-scale_pr5.
PERFORM scale_entry USING i_inforecord-scale_qty6
i_inforecord-scale_pr6.
PERFORM scale_entry USING i_inforecord-scale_qty7
i_inforecord-scale_pr7.
PERFORM scale_entry USING i_inforecord-scale_qty8
i_inforecord-scale_pr8.
PERFORM scale_entry USING i_inforecord-scale_qty9
i_inforecord-scale_pr9.
PERFORM scale_entry USING i_inforecord-scale_qty10
i_inforecord-scale_pr10.
PERFORM insert_bdc_new.
ENDIF.
ENDFORM. " insert_screen_header
*& Form insert_bdc
Insert BDC
FORM insert_bdc_new .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'ME11'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = i_bdc_table
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR i_bdc_table[].
ENDFORM. " insert_bdc
*& Form close_bdc_session
Close the BDC session
FORM close_bdc_session .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " close_bdc_session
*& Form f_load_input_file
Upload the file
FORM f_load_input_file.
Check always Local file for upload
IF p_rloc1 = zc_yes.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_fname1
filetype = 'DAT'
TABLES
data_tab = i_inforecord
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_load_input_file
*& Form release_bdc
Release the session
FORM release_bdc.
SUBMIT rsbdcsub WITH mappe EQ p_group
WITH von EQ sy-datum
WITH bis EQ sy-datum
WITH fehler EQ '.'
EXPORTING LIST TO MEMORY
AND RETURN.
ENDFORM. " release_bdc
*& Form scale_entry
Populate the Scale quantities
-->P_SCALE_QTY
-->P_SCALE_PRICE
FORM scale_entry USING p_scale_qty
p_scale_price.
Increment the Counter
g_counter = g_counter + 1.
IF p_scale_qty <> space.
CONCATENATE 'KONM-KSTBM(' g_counter ')' INTO g_field_name.
PERFORM bdc_insert_field USING g_field_name p_scale_qty.
CONCATENATE 'KONM-KBETR(' g_counter ')' INTO g_field_name.
PERFORM bdc_insert_field USING g_field_name p_scale_price.
ENDIF.
ENDFORM.
*& Form bdc_insert
To uncheck the Unlimited (UEBTK)
FORM bdc_insert USING f_name f_value.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDFORM. " bdc_insert
Reward points if it is usefull ....
Cheers,
Chandra Sekhar. -
RFBIBL00 - issue in Batch Input Session created
Hi Experts,
I am Posting a document thru FB01, for this I am using RFBIBL00 and RSBDCSUB programs to create a Batch Input Session,
I have filled all the required fields for structures BBPKF, BBSEG and BBTAX, but the session created is not processed successfully, while processing it in Foreground, I am getting a Message saying 'No batch input data for screen SAPLKEAK 0300 '.
Can anyone please help me on this.Hi Experts,
Now I have 2 errors in the Batch Input Session Log,
1. Field COBL-PRCTR(Profit Center). does not exist in the screen SAPLKACB 0002
2. Field DKACB-XERGO(Details - Its a check box in the screen). does not exist in the screen SAPLKACB 0002.
But I can see that these filelds are existing in the screens, can anyone let me know why this error occurs.
This is occuring after COPA generation with new fields.
I am trying for a OSS Note also, but I am not getting any. Please help. -
Batch input session is not generating In BRS
Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
RatnamHi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar -
BDC programming using Batch input Session.
Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121 ,19810607,MIADONG1234
423459,KIM EI HWAN122 ,19810607,MIADONG1235
433459,KIM EI HWAN123 ,19810607,MIADONG1236
443459,KIM EI HWAN124 ,19810607,MIADONG1237
453459,KIM EI HWAN125 ,19810607,MIADONG1238
463459,KIM EI HWAN126 ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL, "For Local file upload
RECORD(200) TYPE C,
END OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0. "BDCDATA itab
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0. "Message itab
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
F_TBL TYPE FILETABLE. "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL, "FILETABLE structure
STR_LOCAL TYPE TYP_LOCAL. "Local file structure
= Variable definition ================================================
DATA: LV_RC TYPE I, "Method parameter
ENUMBER TYPE ZT601-ENUMBER, "Employee number
NAME TYPE ZT601-NAME, "Employee name
BIRTH TYPE ZT601-BIRTH, "Birthday
HOMETOWN TYPE ZT601-HOMETOWN, "Hometown
SYSVAL TYPE SY-SUBRC. "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'. "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME TYPE RLGRAP-FILENAME OBLIGATORY, "File path
EXECMODE(1) TYPE C. "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
STR_F_TBL,
STR_LOCAL,
ENUMBER,
NAME,
BIRTH,
HOMETOWN.
REFRESH: F_TBL,
TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
DEFAULT_FILENAME = '*.TXT'
CHANGING
FILE_TABLE = F_TBL
RC = LV_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
OTHERS = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = F_NAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = TBL_LOCAL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
SPLIT STR_LOCAL AT ',' INTO ENUMBER
NAME
BIRTH
HOMETOWN.
*----- Data check Function module
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = BIRTH
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1
OTHERS = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
IF SY-SUBRC <> 0.
MESSAGE E003 WITH BIRTH.
ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SHOW'. "Display button
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME. "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TDED'. "Create entry
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSD02'.
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SAVE'. "Save
PERFORM BDC_FIELD USING 'ZT601-MANDT'
SY-MANDT. "Client
PERFORM BDC_FIELD USING 'ZT601-ENUMBER'
ENUMBER. "Employee number
PERFORM BDC_FIELD USING 'ZT601-NAME'
NAME. "Employee name
PERFORM BDC_FIELD USING 'ZT601-BIRTH'
BIRTH. "Birthday
PERFORM BDC_FIELD USING 'ZT601-HOMETOWN'
HOMETOWN. "Hometown
PERFORM BDC_FIELD USING 'ZT601-CRDATE'
SY-DATUM. "System date
PERFORM BDC_FIELD USING 'ZT601-CRTIME'
SY-UZEIT. "System time
PERFORM BDC_FIELD USING 'ZT601-CRUSER'
SY-UNAME. "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/EBACK'. "Back
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=WB_BACK'. "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BACK'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME.
PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
FORM BDC_DYNPRO *
Put Program-Id, Dynpro screen number, Start point
into DBCDATA
--> PROGRAM *
--> DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
FORM BDC_FIELD *
Put Field Name and Value into BDCDATA
--> FNAM *
--> FVAL *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
FORM bdc_process *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'Testsession'
KEEP = 'X'
USER = SY-UNAME.
IF SY-SUBRC <> 0.
MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
FORM bdc_insert *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'SE11'
TABLES
DYNPROTAB = BDC_TAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
FORM bdc_close *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too. -
At the time of Batch input session system asking business place and profit
Hi,
After doing the transaction f.26 interest calculation on customers (security depost) then we are running the batch input session there system asking business place and profit center there we are giving manually, my client having thousands of customers so they wants update these automatically.
is there any option for automatically updation for business place and profit center.
Kindly give me the solution.
Thanks &Reg
obiThere will be two options.
1. Customize default profit centre for GL
2. Write substitution for profit centre -
'S' message in BDC and message of type 'A' in batch input session
We have to upload data for ABZON transaction of assets. When we use LSMW with recording method and try to upload say 3 records. All teh records are updated successfully but the batch input session log says last two records with a message of type 'A' "leave transaction is not possible in batch input"
But when we upload the same data with BDC program with call transaction then teh log shows same message with type 'S'.
what could be the reason for this?
Though data gets uploaded successfully the 'A' message is being displayed in LSMW batch input log.
if anyone has encountered a similar problem pls let us know how to resolve this asap.
Thanks,
SimmiDid your batch input end with save ( /11 ) or what ok_code are you using ?
-
How to see the Batch input session name in SM35 with User name.
Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike -
Manual Bank Reconciliation Statement - Processing Batch Input Session
Hi experts,
After processing FF67 transaction, while processing batch input session, system expecting manual clearing of open items in bank sub accounts. If I manually clear, then only it is processing further till end of all transactions in batch input session. Can any one suggest, how to avoid this manual intervention in Batch Input Session, system should map cheque number, amount and clear automatically?
suggestions will be rewarded.
Regards
Sarma BHHi Sarma
In FF67 transaction code please select bank postings only check box
If thr anything u want tell me
Please award points if it is useful
Regards
Raju.k -
SM35 - manual processing of the batch input session
Hello,
In SM35 I see that some batch input sessions were processed by user XXX-XXXX (user type:System) (in our case INT-3528) in N mode. The question is: how to determine the exact user who has really processed that session? We need to stop that - I guess - automatic processing of the sessions and process them manually.
Thanks for help,
SlawekHi,
also, you can check the logs directly in SM35. So if any documents were posted (or anyting updated in the system) information about what happened should be shown there.
If there were acounting documents (table BKPF), I think the user name will be the same system user "who" has processed the sessions.
I think that your basis team has set up the system in a way that batch input sessions are processed automatically. This is simialr when scheduled jobs are running under a pseudo user name (system user, IT user, not a real person behind). You can ask the basis team to switch off this automatic processing competely or only for selected sessions.
Hope that helps, points welcome
Csaba
Maybe you are looking for
-
6 attempts to install PE12 - 6 FAILs
Hi. I bought Photoshop Elements 12 from Amazon. It installed the first time, but later I decided to reinstall it. I downloaded the software again from Amazon and SIX times I tried to reinstall it. Sometimes I did it manually and sometimes I let the A
-
Battery life good or bad, confused
is this good battery life or not? .... my friends tell me its bad ive been using my phone for 2 hours and 24 min and its at 64% with 4 hours and 7 min of standby is this good or bad or is it normal usage?
-
Need to run Eseutil when moving volumes?
Do I need to run the Eseutil integrity check when I'm moving the volumes for exchange to a different DPM 2012 R2 server? It looks like Eseutil is verifying the Integrity of the Exchange database. This was originally run on the Exchange database mont
-
Hello colleagues, I have serious question, please help me out if you know. I'm going to define my own (Z*) status profile in CRMBS02. But how will it be related with standard action profile? For example, if I set my z-status "sent to the last level s
-
How can I remove app ID in my AppStore ?
L Please help me o want to remove user name which shows up when I came to update some apps