Sales Return GL account update
Hi Gurus,
I am using ecc 6.0. ides. I am not authorized to access OSS notes. I have searched a lot for solution. But i could not find any soluton.
I created sales return in VA01 and sales return deliviry in VL01N. So in VL01N transaction 651 movement type is being used and no any accounting document created. I have to use 453 movement type in MB1B t.c. in order to uptade (namely reverse of cost of good sold posting) cost of good sold and materialgl accounts. In that t.c. accounting document is created but the value that is being is posted is not correct.
How can i configure 453 movement type in order to update gl account with the material cost which is in material master in accounting segment?
Or how can i make configurations in order to directly update cost of good sold and materials gl accounts in VL01N t.c.?
Please with tc code reference.
Thanks in advance.
Hi,
In case of Std. Sales Return the movement type which is triggered is 653.
Please check whether your are using the standard Item category REN incase of Returns. Also check whether your Schedule line category is DN ?
The mov.type in delivery is picked up based on your schedule line settings in VOV6 transaction.
Please change the mov.type to 653 in the above settings & check for the corresponding scheduleline category.
Thanks & Regards,
Similar Messages
-
Material return(sales return)-default stock updation
Daer Gurus
While material return(sales return), default stock updation is possible through Transfer posting or some other transcation...pls help me to give a Soln
Regards
RageshIf a customer returns goods , you must first determine whether or not a returns delivery exists for the returns in the Sales (SD-SLS) component. You then enter the return with or without a returns delivery.
Since returns from the customer are usually examined, the quantity returned is first posted to blocked stock returns. As is the case with goods receipt blocked stock, blocked stock returns are neither valuated nor do they count as unrestricted-use stock.
If an examination proves that the returned quantity should be taken over into unrestricted-use stock, you enter the transfer to unrestricted-use stock in a second step. It is at that time that the valuation of the goods receipt occurs.
If a returns delivery exists, the return should be posted in the Sales (SD-SLS) component, not in the Inventory Management component.
Depending on how Customizing for Sales is configured (the movement type is configured in the step Define Schedule Line Category), the delivery is posted to the following stock:
Blocked stock returns (non-valuated, not unrestricted-use) (movement type 651)
Unrestricted-use stock (movement type 653)
Quality inspection stock (movement type 655)
Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
If blocked stock returns are to be transferred into your company's own stock, you enter the transfer as a transfer posting. Choose movement type 453 (to unrestricted-use stock), 457 (to stock in quality inspection stock), or 459 (to blocked stock.
If helps rewards points.
Regards
TAJUDDIN -
Sales Return Account Determination
Hi,
I have a query on revenue account determination for Sales returns.
Is there a seperate process for the sales return revenue account determination (other than VKOA).
I want to have a seperate revenue account for Sales return. How can this be acheived.
Please advise.
Thanks in Advance,
SafiHow you want revenue account deteminaton ?
Seperate revenue account means what?
you want to maintain separate G/L account for sales returns?
if yes, then maintain the different pricing procedure with diff Acct keys, maintian the account determination will solve.
plz clarify -
Accounting documents not cleared - sales return being procced
Dear Experts,
In sales return process, material was received by Movt.651, credit memo raised, while seeing the document flow the sales return document showing as "being processed" and Accounting documents showing as "not cleared". how to clear the accouting document.
J.FrancisHi experts,
Withholding tax was deducted, challan was prepared by j1inchln, bank challan was updated by j1inbank, checked all details are flowing in j1inmis. while printing the tds certificate tds-basic and ecess amounts are not appearing in the certificate. Can you suggest what could be the reason.
J.Francis -
hai gurus,
Iam here discusing about a sales return process. I have a scenario like the client sells 1000 nos of goods
,among that 10 comes as returns. i will refeer to billing document and create a sales return order now quality says among 10 nos of returns 8 can be reused again but 2 nos is fully damaged during transit.
Now i do PGR and after that when credit memo comes i will do for 8 nos and 2 nos i will do another credit memo.during the 2nos i claim to insurance account .here the price,Bed,Schess,Ecess goes to insurance claim account and the client wants the vat which he took from his client also to be gng to the insurance claim account.
As vat reverses back to the same vat g/l account.
now can any suggest me is there any way to transfer the vat amunt to another insurance claim G/L account
as per standard SAP it reverses the same vat G/L account.
tax ink is been used and vat g/l account are triggered through tax code and if necessary through table entry t030k with respect to business place
with regardsWe too have same req from the client & we did in below method.
we have created new condition table in VKOA - with sales org - dist channel- item cateogry(eg:REN) -
assign this table to resp access seq - make sure , it should be in first line , out of all the other tables. ( the reason is, if system finds one condition record with any resp table, it will stop searching for other condition records).
maintian return GL account against the above combinaiton created with this new table.
its working fine for us, ( if you dont find , Item category field, in field catelog, add this field by selecting , New entries- )
revert -
Customer GL Account Updates by Creating a Sales Order
Dear all,
I would like to know detailed information about customer GL Account updates based on Sales Order creation.
We have a POS system, there we are creating Sales Orders for the customers.
As per my knowledge by creating a sales order system is performing the following jobs.
Debiting Customer Account
Crediting Sales Account.
Please suggest me that my understanding is right or not.
What else job is performed with regards to financial accounts for the customer.
Where can I see these updations at each level starting from Sales Order creation, Delivery and Invoice.
Please educate to get a clear idea of the process. your suggestions will be highly appreciated.
Thank you
Raghu RamHi,
there will no accounting entry at sales order creation.
Here is the sd cycle:
sales order no accounting effect
goods deleivery to customer
COGS a/c dr
to stock
Billing to customer
customer a/c dr
to sales revenue
Hope this is clear
pls assign points if it was
Thanks
Vamsi -
Workflow fo returned sales order modified from updating the billing block t
please tell me how to find returned sales order modified from updating the billing block to delivery block and how to create blocks here.i want to know updating means what is happening here.
Thread locked.
Beginner questions are very welcome, but your question makes it obvious that you didn't even bother looking at the help or searching on SDN.
Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] on how to post a good question and make a little effort yourself before expecting people to give up their time to help you. -
Sales Return Account GL Determination
Hi Expert,
I cannot find any use for Sales retun Account in the GL determination.
During AR Sales Return, only the Inventory and OCst of Goods Sold is needed to be reverse.
Can anyone tell me the purposed of this GL Account.
I'm Usng 2007A.
Regards,
AmyHi Amy,
1.With out Sales Return account you cannot add the AR Credit memo document.
2.Usually Sales Return account are mapped the same in Inventory account are mapped in GL Detremination.
3.At the time of Book AR Invoice Document Inventory Account are Credited.
4.AR credit memo booked based on the AR invoice Sales Return account are Debited.
You map the same in Inventory Account and Sales Return Account this can be knock off.
In some cases customer asking i want to separate GL for the Sales Return Amount
that time we map the sales return account in different account not Inventory account.
*Close the thread if issue solved.
Regards
Jambulingam.P
Edited by: Jambulingam P on Jul 8, 2009 8:28 AM -
SALES RETURN WITH REFERENCE GL accounts
Hello SAP Gurus
when we do salesreturn with reference it will pick the same pricing procedure in returns and the accounting document in credit memo will be a reverse to same gl as in normal pricing procedure
eg customer dr 123
sales ac cr 222
bed cr 333
ecess cr 444
sheces cr 555
vat cr 666
In returns with refernce the same entry will get reversed
eg customer cr 123
sales ac dr 222
bed dr 333
ecess dr 444
sheces dr 555
vat dr 666
But my client requremnt is instead of sales ac 222 he wants a new sale return ac to be debited with new GL 232 but in scenario sales return with refernce its looking impossible to me
Can any one guide me on this is there ne other way out HERE I AM ONLY ADDRESSING SALES RETURN WITH REFERENCEHi - try this out -
copy your existing pricing procedure to new one
(eg pric proc zvva01 to zvret01)
for zvret01, assign new gl account determination as required
assign zret01 to billing type for returns
try it out and see if yoiu can make it work
cheers
nandu -
Sales Return Process at Depot with RG23D Update
Hi,
Can anybody give me complete process for Sales return at depot with RG23D register update ?
Thanks in advance...........
SanjayHai sanjay,
1) create return order in depot
2) return delivery
3) when u create return delivery Goods receipt document generates
4) enter the goods receipt document in J1IG and enter the excise values manually with reference to header excise condition values from return order and update depot register.
As when return comes depot register has to be updated with value and quantity. then create credit memo to customer.
Regards
Saju -
New Workflow for returned sales order modified from updating the billin
now i am creating Created Workflow for returned sales order modified from updating the billing block to the delivery block.tell me how to do this.ca n use here the control approval process.
Thread locked.
Beginner questions are very welcome, but your question makes it obvious that you didn't even bother looking at the help or searching on SDN.
Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] on how to post a good question and make a little effort yourself before expecting people to give up their time to help you. -
User Exits for Invoice creation ,cancellation and sales return
Hi Gurus,
Pl help me it's very urgent.
I did not find any user exit invoice creation so i wrote the following code in include program
MV60AF0B_BELEG_SICHERN.
This code is to update the Z*table while saving invoice ,cancellation and sales return.
The code modification is like below
FORM BELEG_SICHERN *
Buchen Fakturabelege *
FORM BELEG_SICHERN.
READ TABLE XVBRK INDEX 1.
IF SY-SUBRC NE 0.
CALL FUNCTION 'DEQUEUE_ALL'.
MESSAGE S032.
EXIT.
ENDIF.
IF SAMH_MOD = ON.
EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
ENDIF.
DATA: CALC_TYPE.
IF REBATE_DETERMINED = 'Y'.
CALC_TYPE = 'A'.
ELSE.
CALC_TYPE = 'I'.
ENDIF.
*{ INSERT RD1K903017 1
Work Area*********************
data : wa_xvbrk type VBRKVB.
data : wa_xvbrp type vbrpvb.
data : wa_zmigo type zmigo.
data : wa_vbrp type vbrp.
Internal table Creation*******
DATA: BEGIN OF tab_XVBRP OCCURS 100.
INCLUDE STRUCTURE VBRPVB.
DATA: END OF tab_XVBRP.
data : begin of tab_vbeln occurs 10,
vbeln type vbrk-vbeln,
knumv type vbrk-knumv,
end of tab_vbeln.
data : tab_zmigo type table of zmigo.
data : tab_vbrp type table of vbrp.
*****Data declaration*************
data : v_no_of_inv type i.
data : v_vbeln_no(10) type n.
data : v_last_inv_no(10) type n.
data : v_first_inv_no(10) type c.
data : v_tot_qty type i.
data : v_frbnr type mkpf-frbnr.
*******Ranges*********************
ranges : r_vbeln for vbrk-vbeln.
*****Populating IT****************
tab_xvbrp[] = xvbrp[].
describe table xvbrk lines v_no_of_inv.
*} INSERT
CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
EXPORTING
VBSK_I = VBSK
WITH_POSTING = 'A'
PREISFINDUNGSART = CALC_TYPE
IMPORTING
VBSK_E = VBSK
TABLES
XKOMFK = XKOMFK
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBSS = XVBSS
XVBRK = XVBRK
XVBRP = XVBRP
XVBPA = XVBPA
XKOMV = XKOMV.
*{ INSERT RD1K903017 2
data : v_count type i,v_fkimg type i .
data : v_no_of_records(10) type n.
wa_xvbrk = xvbrk.
********Selecting the last rec no from ZMIGO
select max( sr_no ) from zmigo into v_no_of_records.
*****If Distribution channel is not ZB*********
if wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
if v_no_of_inv = 1. " Process only when there is one invoice
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
endloop.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
clear v_no_of_inv.
else. "When there are Split Invoices
v_last_inv_no = wa_xvbrk-vbeln.
v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
v_first_inv_no = v_vbeln_no.
sort tab_xvbrp by vbeln.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = v_vbeln_no. "wa_vbrp-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = v_vbeln_no.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
at end of vbeln.
v_vbeln_no = v_vbeln_no + 1.
endat.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
endloop.
endif. "End of first 2nd IF.
clear : v_no_of_inv, v_vbeln_no.
endif.
****************Sales return************************************
if wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '651'.
condense wa_xvbrk-xblnr.
wa_zmigo-reference = wa_xvbrk-xblnr.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
endloop.
endif.
*******Invoice Cancellation*****************************
if wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
delete tab_xvbrp[] where shkzg eq 'X'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
condense wa_xvbrk-zuonr.
wa_zmigo-reference = wa_xvbrk-zuonr.
wa_zmigo-mtype = '602'.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg.
endloop.
endif.
clear : v_no_of_records.
*} INSERT
CALL FUNCTION 'STACK_RESET'.
R185D-DATALOSS = SPACE.
FOLGEAUFRUF102 = SPACE.
PERFORM SETPAR_INIT.
*{ INSERT RD1K903017 3
*} INSERT
LEAVE.
ENDFORM.
This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
sometime populating with wrong data , partial data and sometimes no updation at all.
I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
thing is happening.
What could be the reason.
Looking for help very urgent any other alternate option.Hi,
Go thru these..
Enhancement
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line (transfer to accounting)
SDVFX003 User exit: Cash clearing (transfer to accounting)
SDVFX004 User exit: G/L line (transfer to accounting)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit: Tax line (transfer to accounting)
SDVFX005 User exit: Reserves (transfer to accounting)
Business Add-in
SD_CIN_LV60AU02 BADI for billing
If it is helpful rewards points
Regards
Pratap.M -
Dear Experts,
In one of the scenarios of Sales Return, customers raises debit memo while returning the goods, so my client makes the payment for that, in the next step if the material can be rectified he does the needed rectification and again delivers the material to the same customer with a new invoice, please suggest how to Map this.
Regards,
Rais AhmedHi,
I think your client dont control returned material in the system. So u don't use return process.
You can control returned material without system, and after rectifition you use MB1C to goods receipt rectifited material.
Then use standard process to sell rectifited material (SO-DO-Bill)
This is the simplest.
In other case, u can use return processing
All returns against sales order are effected against sales order type RE.
1. Create a return request. (Using Sales Order in SD)
2. Create outbound delivery according to return request.
3. If the setting is correct in the outbound delivery screen SAP will automatically switch post goods issue button into post goods receipt. The setting is in sales order item category and delivery type.
4. In the standard system the movement type used is 651.
5. After post goods issues receipt is done using outbound delivery, the quantity is placed in blocked stock without value updating.
6. You will then decide if the return quantity are indeed bad stock or not.
7. Transfer Posting from block stock to unrestricted stock (mvt type 453), this will have accounting effect (Debit Inventory, Credit COGS)
8. SO-DO-Bill for Sales standard process
Rgds -
hai Gurus,
I have a scenario of Sales return. The customer returns goods with challan.The return sales order is created for 100 nos as per the challan.
But by physical verifcation only 90nos are there.
90 nos are sent to QA for Inspection no QA module interface here in this scenario.
QA will inspect and sents a manual document which contains Ok quantity and not ok quantity(damaged).
80 ok and 10 not ok ( for example)
Now For 80 ok the client will do pgr and for the remaining 10nos which is not ok he will use MB1C and dump in Scrap storage location.
Now credit memo.Here with respect to return sales order he will select manually 80 nos whre the return order conatins 100 nos and prepare a credit memo.
Remaining 10 nos they have a scenario of claiming to insurance so he will select 10 manually l from the selection list and prepare credit memo for the customer but the price excise duties all will be claimed to insurance account.
Now the user says that to select manually the Ok and notok quantity from the open sales return order will be difficult so he wants some information message when user does the credit memo the system should say for return order 80 nos is ok.
The client feels that sometimes the user will wrongly select the quantities eventhough details regarding the QA information is in front of his desk.
So please give me any suggestions hw to block the user he wrongly enter the ok quantity nos.
Any user exit or anything please mention
With regardsSelf Answered
Better try to develop the habit of updating the forum as to how your issue is solved; else just click the "Answered" button. By adding such unwanted text, it is only bringing all your old threads to top of the forum which could have been avoided
thanks
G. Lakshmipathi -
Sales Return from Customer after 180 days
Hi,
I have a requirement on sales return, if the return is done after 180 days, government does not allow to adjust the respective tax amount relating to that return goods.
For example:/sales invoice:
Customer Dr 110
Tax Cr 10
Sales Cr 100
In case of return this entry will reversed (if it is partial partial amount will be reversed).
Requirement:
If the return is happened after 180 days, tax reverse can not be accepted.
In this case what is the scenario.
1. Is this tax amount goes to Tax expnese account (Dr P/L account)
2. Is this tax amount added to Material Stock value
Please update me which more details.
Thanks
ParthaHi,
Perhaps Note 34526 - Delivery free of charge and value-added tax will suggest you a solution. You must handle it with a VOFM in the pricing procedure.
I hope this helps you
Regards,
Eduardo
Maybe you are looking for
-
Ipod classic 2nd generation not recognized on itunes
So i still have an old ipod 2nd gen for windows. though i have a firewire and the mini port on my computer running windows 7, it does not recognize my ipod classic 2nd gen. i am trying to put stuff on it but nothing. any ideas if i need an old versio
-
IPod touch is not activating when connected through itunes. What could be the problem? It shows an error code"0XE8000004". What does it mean? How to activate without doing it through wifi.?
-
Dear all, I found the error message is " MB_UPDATE_TASKS V1 (no retry) Error" and the error detail is " MA 120: Period for date 12.06.2007 " Is it related to a "fiscal year variant" in article master setting? Best regards, Chris
-
Managed Folder linked to Entire Mailbox
Hello I have an Exchange 2010 SP1 with Managed Folder Mailbox Policy configured to some users. It's configured to link with Inbox, Sent items,... and Entire Mailbox.I believe that due to the "Entire Mailbox" link it is deleting old contacts too. Cons
-
With Vista x64, I can't get exported library restored
I had to do a system recovery on my laptop. Before I started I exportd my library to my exteranl hard drive. After restore andgetting all my updates an such up to date I re-installed iTunes and attempted to restore my library. Clearly there was no si