Sales tax data in the posting term is not complete

Hi
i did the customisation for for new condition type and contract in configration
but the problem is while creating the contract in recn based on the new contract type and condition type i got the error like
Sales tax data in the posting term is not complete
can anyone give any suggestions on this.

Hi Franz.
The error continues.
Sales tax code not found for company code 7000 IC0 GRP.IMPOSTO SIA 01.01.2010
Message no. REEXFI000
Follow my customizing:
- Integration FI-GL, FI-AR, FI-AP - Taxes
- Assign Tax Codes
Country       tax type               tax group                         valid from       tax code
BR     IC0     GRP.IMPOSTO SIA     10.06.2010           B0
I have not found the parameter "Company"
Next configuration:
- Integration FI-GL, FI-AR, FI-AP - Taxes
- Assign Tax Code (for FI Document)
Country        tax code        valid from         valid to        tax type          tax group
BR     B0     01.01.2010     31.12.2010         IC0     GRP.IMPOSTO SIA
You think you have more configurations to be made?
Tks
Lucas

Similar Messages

Sales tax data in the posting term is not consistent (Real Estate Contract)

Hi Experts ,
getting the following error in while creating a "Rental Contract" through the T. Code RECN while trying to enter data in the " Conditions" tab page of the contract . Have made all the entries in in the Posting Parameters tab ( e.g. Payment Method ,House Bank ,House Bank Acct ,Bank Details ,Tax Type ,Tax Group) but still getting this error
ERROR MESSAGE
Sales tax data in the posting term is not consistent
Message no. RECD076
Diagnosis
The sales tax data in the posting term is inconsistent.
Procedure
Switch to maintenance of posting terms and correct all errors that are shown there.
Please help ....

Hi Ananda.
What did you do to resolved this problem?
Could you help?
Tks
Lucas

Sales tax data in the posting term is not consistent (Error in Real Estate)

The following error is occured while creating a real estate contract.
Sales tax data in the posting term is not consistent
Message no. RECD076
Diagnosis
The sales tax data in the posting term is inconsistent.
Procedure
Switch to maintenance of posting terms and correct all errors that are shown there.

Hi Ananda.
What did you do to resolved this problem?
Could you help?
Tks
Lucas

Sales tax data do not define output tax

Dear Experts,
I am creating contract and getting following error 'Sales tax data do not define output tax' in SAP REFX contract
I have done the following
define tax types
define tax groups
define tax codes
Assign tax code to tax type and group
Assignment of tax transactions key
Assign country to calculation procedure
Have i missed something? If you see the contract the tax rate 10% is getting picked Please help
Thanks Regards
yezdevan

Hi Vasudevan,
Check the following checklist and try.
1. For tax code used, check for percentage value maintenance for the relevant condition type in transaction FV13, if maintained check for date validity and deletion indicators.
2. Tax code should be assigned to company code at: Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Determination of Excise Duty -> Condition-Based Excise Determination -> Assign Tax Code to Company Codes.
3. The condition type used to maintain the tax code, as seen in FTXP. should have MVST or MWST as the access sequence in OBYZ settings, based on input or output tax respectively.
Hope this resolves the issue.
Best Regards,
Hardik Sharma

Whether we can able to save the data in the portal side or not?

Hi All,
Could anyone please tell me, whether we can able to save the data in the portal side or not, if possible can you please explain the procedure.
Thanks in advance,
Siva.

If you are familiar with java then you can use the usual jdbc / odbc driver to connect. Do search the forums, this has already been discussed many times before, if you encounter a road block do post back.....
You can also refer to this blog, though it talks about CE 7.1 the concepts remain the same, the configuration screens might differ - Connecting an Application to an External Database in SAP NW CE 7.1
Did some searhing for you refer these also
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c&overridelayout=true
How can I set the data binding between Web Dynpro & Database table
Connect to External Oracle Database
Urgent : Hoe to connect to a ORACLE database throught WEBDYNPRO JAVA <-- good one
Thanks,
GLM
Edited by: GLM on Aug 18, 2009 11:38 AM
Edited by: GLM on Aug 18, 2009 11:41 AM

The payment terms are not getting reflected in PO

Hi,
We are in SRM5.0 Extended Classic scenario.
We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in SRM system.
But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
Could you please suggest what may be the issue here.
Best Regards,
Siddappa

Hello Siddappa,
I am a little confused here with the scenario.
I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
Regards
Pramod

The data from the infoprovider involved could not be checked'

Hi all,
In the the selection screen of the virtual provider through the option display data, am getting message text " the data from the infoprovider involved could not be checked" , and then it brings all the data from the r/3 function module irrespective of the selection by date in the virtual info provider. I am retrieving the data from r/3 function module(RFC) to bw function module assign to virtual infoprovider.
with regards,
Ram

Hi
A Virtual Provider does not store data. to view the data in it you will have to use it in a query and check its data.
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

Good evening. I rebuilt my aypad. writes enter apple id. password to the post office is not selling what to do

good evening. I rebuilt my aypad. writes enter apple id. password to the post office is not selling what to do

If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

What Are the Security Implications of not Completely Signing Database?

Hello everyone,
What are the security implications of not completely signing the database?
From http://www.archlinux.org/pacman/ ,
The following quote implies that the database exists merely just in case hand tweaking is necessary:
maintains a text-based package database (more of a hierarchy), just in case some hand tweaking is necessary.
However, considering that there are cases that pacman's local database needs to be restored, there are implications that the database is essential for pacman to function properly.
From https://wiki.archlinux.org/index.php/Ho … l_Database :
Restore pacman's local database
Signs that pacman needs a local database restoration:
- pacman -Q gives absolutely no output, and pacman -Syu erroneously reports that the system is up to date.
- When trying to install a package using pacman -S package, and it outputs a list of already satisfied dependencies.
- When testdb (part of pacman) reports database inconsistency.
Most likely, pacman's database of installed software, /var/lib/pacman/local, has been corrupted or deleted. While this is a serious problem, it can be restored by following the instructions below.
I know that all official packages (from core, extra, community, etc.) are signed so that all files should be safe, but I'm just paranoid.
What if the database was hacked? Will this lead to installation of harmful software?
Sincerely,
Cylinder57
Last edited by Cylinder57 (2012-10-15 03:42:31)

Cylinder57 wrote:
From this quote:
Allan wrote:But, the OP (also?) talks about the local package database on his computer. That is not signed at all as there is no point. If someone can modify that, then they can regenerate the signature, or just modify any other piece of software on your computer.
Is it going to be easy for anyone other than the authorized user to modify the local package database?
Allan basically answered that with the quote above already as I understand it. Someone who has access to the installation, e.g. is able chrooting your PC via USB, is not held back by any ACLs. However, modifying the local database only makes limited sense because the packages are already installed. Pacman would only recheck, if you re-install a package. The only really relevant attack vector for the package database is
(1) installing an older package with a vulnerability,
(2) re-placing the up-to-date package sig in the local database with the older one and
(3) modifying the system, e.g. via pacman.conf excludes, to not update that.
then also re-installing would not create a sig-error and you get stuck with the bogus old package.
With a signed database this would not be possible. However, as Allan wrote earlier also with a signed database that criminal can manually install (totally leaving pacman & package cache) whatever it needs in this scenario. So, if you are -really- paranoid about that, you probably want to spend (a lot of configuring) time with something like the "aide" package.
Cylinder57 wrote:
And, are the following statements correct:
If the repository databases are modified, the hacker might be able to modify the packages on the server (Considering that if someone can modify the local package database, that person can modify any other piece of software on that particular computer.)
However, pacman won't let users from installing the modified packages (due to package signing,) unless at one person with access is bribed (at least, for an individual package.)
I don't know the intricacies of the server infrastructure - only saw they have great names :-), but I am pretty certain your statements assume that correctly. It is pretty unlikely that someone able to modify the central repository database fails at placing a bogus package for shipping with those access rights at this time. Yet it does no harm not to post any details of such a scenario here imo. In any case: A compromised mirror would be enough for that - and easier to achieve (hacked anywhere or e.g. in a non-democratic state). Plus you also answered it yourself. The keys are key for our safety there. Which keeps me hoping that no criminal lawnmover salesmen frequent the Brisbane area.
As you put up a thread about this, one question you can ask yourself is:
Have you always checked on updates new signatures keys which pacman asks about? If you ever pressed "accept/enter" without checking them out-of-band (e.g. the webserver), that compromised mirror database might have just created a "legitimate" key .. user error, but another attack vector the database signing would catch.
edit: Re-thinking the last paragraph just after posting, I now believe it would not be that easy as implied - simply because the bogus key is not trusted by one of the master keys. The pacman pgp trust model should catch that without database signing. At least it would if only the official repositories are activated, but that's a pre-requisite to the whole thread.
Last edited by Strike0 (2012-10-20 23:01:26)

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, childr

Hello! Really sorry! Originally this APP software free game, only peace of mind to let children play, but a recent credit card reconciliation only to find the charges and found that the game content is not completely free, content or Payplay games, children do not understand the meaning, pressed by mistake to the game fee of options found APP software fees has been removed, the 3 pen order really is not a small amount, a small fortune in Taiwanthe burden, the normal person would not spend such fees to play mobile games, kids really are unintentional, Sorry! hope you can help me claim to cancel the game cost very grateful!
PS: order number --- 1.MH****Z0J --- 2.MH****4QJ --- 3.MH****6NQ
My English is not good, please forgive me.
<Personal Information Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address and phone number from your post.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can turn off in-app purchases on your phone via Settings > General > Restrictions > In-App Purchases 'off'

Mavericks 10.9.1 keeps erring during the download and will not complete. What do I do?

Mavircks 10.9.1 keeps erring during the download and will not complete. What do I do?

Get the official version of Firefox here: http://www.mozilla.com/en-US/firefox/
As long as you '''''don't''''' select the option to '''Remove Firefox personal data and customizations''' when you un-install that "Yahoo version", you won't lose anything.

Illustrator cs6 Can't open the illustration. Could not complete the requested operation.

Hi guys
I'm struggling with my Illustrator CS6. I hope you will help me.
When I try to open my project it says "Can't open the illustration. Could not complete the requested operation." After clicking ok my project is loaded WITHOUT one layer. I sacrificed a lot of time doing it and i don't want to start it over again. None of the ways to open it as older version of program work. I know that it can be recovered, because when I open the same project in After Effects all layers are loaded properly. If somebody know how to solve this problem please let me know asap.

Thanks, Monica, Ryan, and Mike. It helps to know that this is the best I'm likely to get, so I don't waste more time looking for a better solution.
I was able to place the file, then simply redraw or retype the broken parts on top of the placed art. Often, I could click into the placed art and copy contents from it. For type, though, I had to retype whatever got broken.
Since I posted my 1st comment here on Dec. 5, it happened to me again. Again, I had to reconstruct parts of it, the same way.
Sometimes, I save a file without PDF compatibility enabled, just to make it save more quickly. I'm glad I didn't do that with this file.

When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.

When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'. I can access my account on a different PC but not my own. Can you advise me as to what I should do please?

Hello donnafromwakefield,
The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
Cheers,
Allen

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

Sales tax data in the posting term is not complete

Similar Messages

Maybe you are looking for