Sales taxes are being calculated on the conditions tab for service master

Hi All,
Create a PO for the following - Acct assignment cat F, item cat D, plant A001, CC USJ2, Pur org US10. Choose a service master. If you see in line item and check the conditions tab, you will find NAVS value is 0. Same NAVS value goes to EKPO-NAVNW where it is showing as 9% of the PO amount which actually should be 0. The scenario can be simulated by adding another line item copying an existing one. Now if we go to invoice tab and remove Jurisdiction code manually and then again put back the same Jur code, the problem vanishes.
BADI : EXTENSION_US_TAXES
Implementation Name : ZEXTENSION_US_TAXES
in this implementation we have 4 methods.
ME_CALCUL_SRV_TAX,MM_DATA_FOR_TAX_SYSTEM,ME_TAXCOM_MEPO,MM_ITEM_TAX_MODIFY,MS_TAX_DATA_LIMITS and MS_TAX_DATA_SERVICES.
But MM_ITEM_TAX_MODIFY, MS_TAX_DATA_LIMITS and MS_TAX_DATA_SERVICES are empty.
Please guide me in the right direction to resolve this issue.
Thanks in Advance,
Regards,
Raja
IBM.

Wrong assignment of P org with P grp is the route cause, found the error and rectified which is working fine.
Thanks and Regards,
Venkata Koppisetti.

Similar Messages

Number keys are being typed as the symbols.

I can't take off caplock mode, although the caplock is not turned on. Number keys are being typed as the symbols. For example 1 types as the exclamation mark, 2 as the apersand, etc. I tried restarting but now can't log in as I have numbers in my password. Is there a fix to this?
I noticed it in notes, would only allow capital letters and cursor would highlight everything.
Thanks in advance for everyones input

If you are in the habit of eating and/or drinking while using your MBP, your keyboard underneath may be dirty. Or you just may have a hardware problem.
If you have AppleCare or PROCare, call them and/or take the MBP to an Apple Store or AASP.
If no AppleCare, check out the following links for instructions on how to clean your model MBP:
iFixit
TakeItApart
Search YouTube for Macbook Pro “How To” tutorials.
!http://i50.tinypic.com/izvwo1.gif!

Condition Type for Service PO Items

Hi all expert,
May i know that where to define the condition type for Service PO items?
For item of service PO, there have Service Tab, under this tab, there may have few items and each of the item have condition type. thus, i would like to know that where to define this condition type. it is because i found that this condition type is different with PO condition type.
Hope can get ur reply soon.
Thanks~

Hi,
Appreciated for your reply:)
I am confusing on "Variable Condition Schema For External Service" Step, as i view from the table, it seem look like a access sequence and assign to which document type to use pricing procedures.
If let's say i assigned this pricing procedures to PO category and normal PO document type, then does it crash with condition type which config for normal PO (Condition Tab of PO)?
if i assigned my procedures at "Variable Condition Schema For External Service" Step, where i can view my config result?
Waiting for your reply.
Thanks:)

Tax (VAT) being calculated on sales invoices where products are zero rated?

Hi
We are in the process of testing v. 12.1.2 (upgrading from v. 12.0.4).
We are producing sales invoices of zero rated products. However, tax is being calculated on these products. Have checked the item set up and the item is definately set to UK zero fiscal classification.
Is there somewhere in customer set up and/or tax administrator I can check to see if any of our set up is incorrect?
Regards
Jon

When I tested this for the Customer I was able to calculate sales tax on an A/R invoice even when the BP was set to Exempt. I just want to make sure the system is functioning correctly. If I need to change the BP from Exempt to Tax Liable in order to be able to charge tax in some cases then I will do so.
Also, I was told by another SAP consultant the the ONLY thing SAP looks at when deciding to calculate tax was the Ship to address tax code, which does not seem to be the case.
Don

Employer Unemployment Tax Not Being calculated in US Payroll

Hi Experts,
Employer Unemployment Tax (Tax Type 10) for Tax Authority Alabama is not being calculated in US Payroll in my SAP system.
The taxable amt is showing up, but the tax is not being calculated in the payroll log.
No error/warning mssg is provided by BSI in the payroll log.
I have already checked for the following:
1)We are using the standard tax model 002 provided by SAP for Alabama
The tax model settings are fine.
2) Table T5UTX is being maintained.
3) Tax Type 10 is setup against tax auth Alabama in BSI Tax Factory.
For tax auth Federal too, though the taxable for tax type 10 shows up, tax is not being calculated.
Can you please help.
Regards,
Somdeb.

Hello Somdeb,
Please be aware that this is no standard SAP tax model only an example which must be customized as every customer is different.
First check the payroll log to see if the information is being sent to BSI TaxFactory. If not then the issue is mostly the tax model. Different tax models can be used based on the employee.
If the values are being sent to BSI and not being calculated, then there is an issue wil BSI. Send BSI the script and they will tell you what the issue is.
Regards,
Manny

How to list all the datatypes are being used in the database?

Is there any way you can list all the oracle datatypes are being used in the database?
Thanks,
Chau

Use USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

I cannot shu down my iMac (for days) as I get the following message:Photos are being imported to the photo library. Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?

I cannot shut down my iMac (for days now) as I get the following message: "Photos are being imported to the photo library."
Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?
JLB284

Open Activity monitor in Utilities, go to the CPU tab>All Processes, and note any process that would appear to be related to importing photos, such as iPhoto, and use Force Quit. This may only be a temporary fix, as it may start all over again when you reboot. If that happens, we need to do some more investigating.
Also, close all open Applications, then open Terminal in Utilities and copy/paste and hit return, then post the output of this command.
lsof -l +L -R -V | grep /

Photos are being imported to the photo library... nothing being importe

I am trying to to upload my photos from iPhone4 (6.1.3) to iMac with Yosemite and iPhoto 9.6, but it's always the message "photos are being imported to the photo library" pop out without any photo being uploaded. (That forced me to force-quit iPhoto even when the phone is detached from iMac.)

Try the Image Capture application that comes with every Mac. It gives you a little more control over the import process.

Changing the base price for service tax calculation

Hi
i have and PO order with basic price say for 100 /- on which it is calcuating service tax 12% , e-cess 2% hcess--1 .This is coming thru tax code from the tax procedure and these taxes service/ecess /Hecess is to be posted to sepearte G/L account.This is working fine.
Now my requirement is that i want to calculate service tax on some % of the base price say 70 % of the base price. The % will always be changing .i want to calculate service tax on the 70/- not on 100.
i want that system should post this 100 /- to cost of service but the tax should be on whatever percentage i make .Here this is 12.36 % on 70 not on 100 at the time of invoice posting.
please guide me
regards

Hi,
For this you have to maintain the all your charges in your pricing procedure along with each charge you have to maintain 3 condition types for service and chesses.
Ex:
step counter cond.type des.                   from                 to
1 1 P000 Gross Price
1 2 P001 Gross Price
25 0 JM00 Water front royalty                 1
26 0 ser1 service                                  25
27 0 edu1 educationcess                      26
28 0 edu2 se.edu.cess ;                        26
29 0 jm01 Port Dues                                1
30 0 ser1 service                                   29
31 0 edu1 educationcess                       30
32 0 edu2 se.edu.cess                           30
like this you have to built your pricing procedure in a m/08. after that for you want the service tax automatically so for that you have to put the accesses sequence in you service condition types (ser, edu1,edu2).in m/06.
After that you have to maintain info record for that material and import vendor. in me11 in that in condition tab you have to maintain percentage for ser, edu1, edu2 . the system will calculate the service charges automatically.
Thanking you,

Is there a way to find out which CSS rules are being used by the different html files?

Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide?
Thanks - Dave

Firefox add-on "Web Developer Toolbar" is a must have. Information > Display Div & Class details.
https://addons.mozilla.org/en-US/firefox/addon/60
Another handy Firefox Add-on to add to your tool chest is called "Dust-Me Selectors."
http://www.sitepoint.com/dustmeselectors/
"It extracts all the selectors from all the stylesheets on the page you're viewing, then analyzes that page to see which of those selectors are not used. The data is then stored so that when testing subsequent pages, selectors can be crossed off the list as they're encountered.
You can test pages individually, or spider an entire site, and you'll end up with a profile of which selectors are not used anywhere."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Workflow task details are being retrieved from the server

Hi,
Using an approval workflow. when the task has been assigned to the person he is getting an email but when clicking on the edit this task button ,the pop window with the
"workflow task details are being retrieved from the server"
error is getting. SharePoint site 2007 and Microsoft Outlook is 2010.

I have a similar issue with my version of SharePoint.
SharePoint 2010 Enterprise.
Outlook 2013 with MS Exchange
Document approval workflow.
When you open the document approval email that comes from SharePoint and click on "Open this task" the popup window flashes across "workflow tasks details are being retrieved from the server ".
I've tried the regedit fix and the hive fix and resetting IE that some of the other people have said that works and it doesn't.
When I go the site, and connect the task list to Outlook, I can complete the task that way.
I also created a new approval workflow in SharePoint designer and it behaves the same way.
Anything else I should try?
== Steve Morley MedIT, Dalhousie University

I can't exit iPhoto or shut down my laptop - message saying photos are being imported to the photo library - seems to be stuck can anyone suggest what I should do?

I can't exit iPhoto. Message come sup "Photos are being imported to the photo library. Please wait forimport to complete". This has been some days now and Same message comes up if I try to shut laptop down. Can anyone offer any suggestions please?

Use the Force Quit command under the Apple Menu.

There is a constant pop up message of "Photos are being imported to the photo library."

I cannot close my iPhoto or import any new photos. There is a constant pop up message of "Photos are being imported to the photo library." However, I am NOT importing anything to the library. This is very frustrating.
I cannot force quit. I even tried shutting down the computer manually. When my BRAND NEW IMAC starts back up, the same problem persists.
I also tried re-importing photos from my camera and flip camera. My iPhoto will not allow an import because these non existent photos are being imported. HELP PLEASE!

Force Quit iPhoto. It's under the Apple Menu.
Regards
TD

I can't shut down iphoto, it continues to say "photos are being imported to the library"

I tried to download about 70 photos from my camera and it kept saying 1 photo remaining for over 30 minutes so I removed my camera and just figured there was something wrong with the download. Now, when I try to shut down iphoto it continues to say "Photos are being imported to the photo library. Please wait for import to complete." This has been going on now for 2 hours.

Type Command+Option+Esc and in the Force Quite Applications window select iPhoto and force quit it.
OT

Sales taxes are being calculated on the conditions tab for service master

Similar Messages

Maybe you are looking for