Sales with third-party manufacturer

Hi gurus,
I need your help with the following sales scenario:
My company produces product A.
Product B can be manufactured applying minor changes in product A. However, my company doesn't have the machinery to do these changes. They need to be done by a partner.
The sales process begins with the customer requesting product B to my company. As we can't manufacture product B, we send the product A to our partner in order to manufacture product B. The partner charges us for the service and then sends the product B to the customer. An important point here is that the product B won't be sent back to my company, but it will be sent directly to the customer. In the last step, we send the invoice to the customer.
Is there a similar standard scenario I could use as a model?
Regards,
Melgado

>
lmelgado wrote:
> Hi gurus,
>
> I need your help with the following sales scenario:
>
> My company produces product A.
> Product B can be manufactured applying minor changes in product A. However, my company doesn't have the machinery to do these changes. They need to be done by a partner.
>
> The sales process begins with the customer requesting product B to my company. As we can't manufacture product B, we send the product A to our partner in order to manufacture product B. The partner charges us for the service and then sends the product B to the customer. An important point here is that the product B won't be sent back to my company, but it will be sent directly to the customer. In the last step, we send the invoice to the customer.
>
> Is there a similar standard scenario I could use as a model?
>
> Regards,
>
> Melgado
Hello
This seems to me the combination of the standard inter-company and 3rd party sales models where you partner is acting as supplier(of the customer in 3rd party)
1. Inter-company relationship between your company and your company's partner
2. 3rd party relationship between your company , partner and the customer..
Thanks

Similar Messages

Capturing third party manufacturer for the batch

Hi ,
we are in the business of Pharma Products trading and marketing , as per business requirement we need to capture third party manufacturer for particular batch.
The scenario is as follows -
Our Company - Raise PO to Vendor A for Material Mat001 - this vendor A takes same product from any of his own vendors X, Y , Z .( third party manufacturer)
Now the requirement is when we receive goods from Vendor A for MAT001 , it may have multiple batches and these batches may come from one or different sub vendor of A . During GR we need to capture this sub vendor of Vendor A or say third party manufacturer .
Please provide possible solution
Edited by: Bhushan Bivalkar on Jun 4, 2010 11:06 AM

You can use batch characteristics. Make a class (type 023) and assign a characteristic to it (with approprite description).
Assign this class in the material classification view.
Now you can maintain the 3rd vendor's batch number in the batch characteristic (in MSC2N)
Regards,
Aroop

Third party Manufacturing

Hi Sapients,
We are planning to use Third party manufacturing for a plant. And would like to use Purchase orders with TPM order type.
Could some one help me the accounting flow in the third party manufactuirng when using the movement type: 543 and 541.
How are the consumption costs captured..
Thanks
Ravi

Control the process with Outside Process Work Orders. You create a Work Order and a parts list in the normal way but have a two step routing, the first step is the Outside Process done by the Third Party and the second step is receipt of the goods back from them (JDE will not allow an Outside process to be the last step on a routing)
With the first operation you will need a OP item number, this is part number which is made up of the Item being manufactured plus the characters OP plus the operation number, this part number represents the service that the 3rd party is providing and is set up as a Stock Type X, Line Type X
When you run R31410 to attach the parts list it will automatically raise a Purchase Order on the 3rd party
You can then issue the parts to the Work Order in the normal fashion and since you have a P/O for the manufacturing process this will acount for the 3rd party labour
Look on Oracle Support for document 647965.1
Steve

Skill sets required for interfacing with third party

Hi we are currently using LSO 603 , and we are scrom compliant , we want to build an interface with third party , where we have all our manufacturing courses stored . so client wanted to know the skills sets required for building an interface. please advise
Thanks!

Skills required.....
ABAP including BAPI's/Function Modules
understanding of Performance management and how it hangs together.
Happy New Year.
Jules.

EDI Integration using PI with third party connectors

Hi Experts ,
I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
2. How licensing will happen in case of PI ?
3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
4. Do we install Seeburger and PI on the same box ?
5. How will be the landscape with Seeburger Instance ?
6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
Regards ,

Santosh Rawat wrote:>
> Hi Experts ,
>
> I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
>
> 1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
Yes your need to but PI separately,its independed product,its not come with ECC.
> 2. How licensing will happen in case of PI ?
Better to talk with SAP Sales team,they will help you with genuine answers.
> 3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
Its depends on which See Burger Adapter You are going to use,.
> 4. Do we install Seeburger and PI on the same box ?
Yes ,we need to deploy the seeburger drivers on PI Server.
> 5. How will be the landscape with Seeburger Instance ?
google it,you wil find the answer i am not sure
> 6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
As per my knowledge when you develop any interface using seer burger adapter or predefined mappings,its same procedure to transport also.
Regards,
Raj

Intercompany sales and third party sales

Dear folks
can any one of you tell me the process or
what are the steps in intercompany sales and
third party sales on very very high priority
regards
ramarao

Hi
Steps
Intercompany Sales
Sales Order(OR)
Delivery Document(LF) movement type(601)
Invoice(F2) with reference to Delivery Document
Intercompany Invoice( IV ) with reference to Delivery Document
Third Party Orders
Sales Order(OR) Item category (TAS)
Purchase Order(NB) with reference to purchase requsition
MIGO movement type 101 with reference to purchase Order
MIRO with reference to Purchase Order
Invoice(F2) with reference to sales order
ramesh

Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

How to integrate single sign on with third party system

we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Integration of ChaRM with third party tools

Hi all,
We are in the process of building the solution for Change Request Management implementation integrated with third party tool.
As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality.
Did anybody come across this situation?
Please share your experience.
Thanks in advance.
Balaji

Hi Balaji,
there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
I hope I understood you correct
Udo

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

How to integrate DRM with third party tool for loading metadata in SQL table

Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,

1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues.

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

Sales with third-party manufacturer

Similar Messages

Maybe you are looking for