Salesforce issue- Accessing Objects and Reports with 2 master-details

I'm using Crystal Reports XI r2 with the Salesforce data connector installed, and I know the same issue exists in CR 2008 as well. With version of the Salesforce API that the Crystal - Salesforce connector is using, objects that have 2 master-detail relationships are not available to add to reports. Even if I create a stanard Salesforce report with an object with 2 master-details, that report isn't available in the "Stored Procedures" of Salesforce in Crystal. The API is about 3 years out of date, any word on when a new version will be available? This is a big limitation.

Try SP3 for CR 2008. Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Similar Messages

MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012

I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
where I can find this book.
Thanks

Hi Azhar lqbal Gondal,
According to your description, since the issue regards training and certification,
I suggest you post the question in the Learning forums at
http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
you can visit and post your question on the SQL Server Forum.
There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
Exam content can be found here:
http://www.microsoft.com/learning/en-us/exam-70-466.aspx
http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Issues syncing music and videos with itunes

issues syncing music and videos with itunes

Before anyone would be able to provide any troubleshooting steps, you would need to describe what "issues" means. Try describing your problem in detail, as well as what troubleshooting you have already tried before posting your question here. That way no one is wasting your time by asking you to perform steps that you have already taken.

Deploy Forms and Reports with Load Balancing

I am trying to determine what we need to install here. I have read OracleAS, Web Cache, Application Server, and
Forms documents and have no answer still.
We are currently run 9iAS with Forms and Reports 6i only.
I did not do any of those installs. We are migrating to
Forms and Reports 10g. I need to setup an OracleAS 10g
Forms and Reports application server with the ability to
do Load Balancing over 2 windows Web servers to handle
4,000+ users. The application database will be on its own
Windows server.
Do I need to install the Infastructure, BI, and Web cache?
Or just Oracle 10g Application Server option? Or other?
Do I need to install it on both web servers and do
something like clustering? Do I need to install Web
cache? I just took the 10g AS class and basically did not learn anything about deploying Forms and Reports.
Can anyone give me a place to find the things I need to
install and setup?
Thanks.
Kim

I am a DBA and have not done an iAS or AS installation
before but am now required to learn it. We will be using
SSL and no load balancing hardware. We setup for other
customer sites and setting Windows servers in the past.
We have not done load balancing before.
I am just confused with all the 10gAS options there are to
install to just run 10g Forms and Reports and setup
OracleAS 10g with the load balancing features.
So I just need to install OracleAS Forms and Reports
Server if I am just installing Forms and Reports with SSL.
But if for Load Balancing Oracle 10g I need to cluster
just Reports 10g? I thought I would need OracleAS10g
installed on my two Windows servers and somehow cluster
or let the two know they are the same web page handling
the incoming requests? I do know about Apache redirct. Is
that an Apache feature and is it covered in an Oracle
documentation? They did not cover it in class either.

I need interfaces and reports with wxample

Hi all,
I need interface sample date.If any one having please provide
Best Regards
Gopal

What do you mean exactly ?
Nicolas.
Well, I assume more info in your duplicate thread :
i need interfaces and reports with wxample
Message was edited by:
N. Gasparotto

Populate PK(DBSequence) in three related tables with master detail association

Hi
I use jdeveloper 11.1.1.6.0.
My English isn't very good.
I have 3 tables with master detail association between them and primary key from table A should populate to tables B and finally C .The primary key is a sequence from data base and I set PK attribute in table A as a DBSequence. (table C is the child of table B and table B is the child of table A)
My association is like this: A->B(BAFk1Assoc) and B ->C(CBFk1Assoc) and also I select Composition Association for these two association. And I select ‘Cascade Update Key Attribute’
When I insert row in these three related tables, a negative number create but when I COMMIT the PK populate only to table B not to table C and the exception below raises:
Constraint "C_B_FK1" is violated during post operation "Insert"
ORA-02291: integrity constraint (HR.C_B_FK1) violated - parent key not found.
If I only work with tables A and B, there isn't any problem but if I add table C as the child of B, this exception raises.
Habib

The question is how you create the row for table C. Do you create it as child from table b (using the VO for B and using the link to C)?
In this case the framework should populate the PK of the master row B as FK in table C.
You may need to control the order in which the rows are posted to the DB to avoid this problem. Read Advanced Entity Object Techniques - 11g Release 1 (11.1.1.6.0) to get more info about this.
However, sometimes it's easier to control the generation and setting if the PK attributes in the model layer, not relating on db triggers where you get the real values only after the commit operation is done in the db. For this you can use a Groovy expression so you have access to the PK of each new created row right after creation. Read Using Groovy Expression to set a Primary Key with a Sequence Number | JDev &amp; ADF Goodies to find out how to do this.
Timo

Summary Report using Master-Detail Data on Siebel BI Publisher Report

I have to create a Summary Report using Master-Detail relationship. Report fields are Account Name, Special Need Type, Customer Status, No of Customers, No of Claims. I am using rtf to create template and any help is highly appreciated
<?xml version="1.0" encoding="UTF-8" ?>
- <ListofIO>
- <ListOfBipCustomerSpecialNeeds>
- <Account>
<Name>CVNE</Name>
- <ListOfContact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Large Text</SpecialNeedsType>
<PersonUId>1-6NI9</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber>TEST0015362272</AccountNumber>
<ClaimNumber>1-4FVL</ClaimNumber>
<ClaimStatus>Closed</ClaimStatus>
<ClaimGBPAmount />
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Braille</SpecialNeedsType>
<PersonUId>1-L0A</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber />
<ClaimNumber>1-ACX6</ClaimNumber>
<ClaimStatus>Open</ClaimStatus>
<ClaimGBPAmount>818.18196694218</ClaimGBPAmount>
</Contact_Claims>
- <Contact_Claims>
<AccountNumber />
<ClaimNumber>1-GI58</ClaimNumber>
<ClaimStatus />
<ClaimGBPAmount>45454.099173473</ClaimGBPAmount>
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
- <Contact>
<SpecialNeedsFlg>Y</SpecialNeedsFlg>
<SpecialNeedsType>Large Text</SpecialNeedsType>
<PersonUId>1-6FPP</PersonUId>
- <ListOfContact_Claims>
- <Contact_Claims>
<AccountNumber>CVNE</AccountNumber>
<ClaimNumber>1-7BRL</ClaimNumber>
<ClaimStatus>Reviewed</ClaimStatus>
<ClaimGBPAmount>562</ClaimGBPAmount>
</Contact_Claims>
</ListOfContact_Claims>
</Contact>
</ListOfContact>
</Account>
<Login>SADMIN</Login>
</ListOfBipCustomerSpecialNeeds>
</ListofIO>
Edited by: user2298324 on 13-Aug-2010 09:36

Thanks for the reply. The many to many relationship between Claims and Payments are achieved through intersection table in siebel. When Customer has multiple claims, single payment issued for both claims. Also single claim can multiple payments such (part compensation, interests, final compensation etc)

Report with multiple Detail Area

Hi All,
Please see the Report pointed to the link below:
[Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
Some Explanations:
========================
(1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
(2) The lines with "WBLNX'" "123, 123.12",
"WBLNX'"
are variable data associated with the same Heading: "ABCDEFGH..."
(2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
(3) Item Code Descriptions ==> is a Header Info
(4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
(5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
QUESTION:
===================
How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
Thanks and Best regards,
Felix

Hi Felix
You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
Hope this helps.
Regards
Nikhil

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

Fixed Deposit Report with TDS Details

Hello All,
Is there any report available to show Fixed Deposit Report with TDS Details ?

HI
TPM13 basically provides for Subledger Cashflow and hence all entries through any CFM transaction will get reflect here. You can check this for any of CFM postings. This also gives additional details of FI Documents.
Thanks n Rgds
C C

Criteria with Master Detail

Using windows Jdev 11.1.1.4 in application JSF. I have two Objects View linked by View Link. First View is Master and second is Detail. I don' t use "Entity Usage". I defined field by sql statement (in Object View into field Info I view Calculated.....). Also in first View Object I defined Key Attribute and I defined the same Key Attribute in the other View Object. I used the same fields in View Link.
In first (Master) Object View I created a criteria (I don't create criteria in detail View Object).
I created .jspx. I dragged from "Data Controls" the Detail Object and I choosed Master Table and Detail Table. I also dragged the Criteria and I setted property of af:query ResultComponentId at Master Table.
When execute the application works properly (I choose the line in Master table and I see the Detail table properly loaded) but I read in Log of IntegratedWeblogicServer:
*<SimpleSelectOneRenderer> <_getSelectedIndex> Could not find selected item matching value "criteriaByDate" in QueryRenderer$2[UIXEditableFacesBeanImpl, id=null]*
I read this message every time I choose Master table row.
Thanks

I resolved.
I must change ChangeEventPolicy in ...ViewIterator into PageDefs for Detail table.

Oracle forms and reports with object views in oracle 9i

Can We use oracle 9i Object Views in oracle forms and reports. If yes, then which version?

MichaelFerrante,Thank you for your help.
I have already used the HS services to connecto to external databases from our main Oracle database, and the solution works fine.
But unfortunally for this particular client he cannont have installed a Oracle database due to internal policies restrictions.
I can not migrate the full application to another technology like ADF in less than 6 or 8 months.
Do you thifnk that there is any other solution?
Mensagem editada por: user10660669

Migration MS ACCESS FORMS and Reports to Oracle (Java or Forms or Reports)

Hello ,
can someone tell me, how i can migrate a whole MS ACCESS 2000 mdb (with forms and Reports) to Oracle.
I think i have first migrate the Access DB with the OMWB to Oracle and in the next Step to convert the VBA Code to JAVA or Forms9i.
BUT Is there a tool available for Migrating VBA code like the OMWB ????

I don't know if this is an obvious question, but do you have MS Access 2k installed on the machine you are trying to run this from? I'm assuming yes.
If you do and there is still a problem, you should log a ticket for support who will take your mdb and help out with the issue for you.
Many thanks
Barry

OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI

Hi everyone,
I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
Here's how I implemented it:
Dashboard Tab A -- Uses Navigate to BI Content
1) I have a prompt on Fiscal month in dashboard tab A.
2) I created the bulb gauge and put it in dashboard tab A
3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
3) Prompted the trend on Metric Type column and put it in dashboard tab A.
4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
5) In reality, nothing happens.
6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
Dashboard Tab B -- Use Master Detail -Events
1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
Either way, neither of these are working properly for me.
Has anyone else had these issues?
-=Joe
Has anyone else had an issue with this?

So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff.

Issue with Master Detail relation in OAF page -- Help

Hi,
I am developing an OA page with a master detail relation. The detail records are displayed in the subtab region.
The issue that I am facing is as follows:
If there are 2 detail records in the detail table, then my page is displaying these 2 records twice i.e.
Detail Records:
Header Id Line Id
2 1
3 1
Header Id Line Id
2 1
3 1
If the number of detail record increases, then again the display also increases that many times i.e. 3 records gets displayed thrice.
Kindly help to figure out the issue.
Thanks In Advance.

Hi,
Take the following actions.
1. Try to display your records in simple Table and remove it from subtab,
2. check relations as well, you can delete and re-create all the relations with EOs and VOs and recreate them.
3. Also check when your VO get popluated that how many rows are there in Detail VO ?
For example.
int x = yourViewObject.getRowCount();
System.out.println("Number of rows in detail view Object"+x);
Haroon.

Salesforce issue- Accessing Objects and Reports with 2 master-details

Similar Messages

Maybe you are looking for