SalesOrder characteristics are not retrieved using VC_I_GET_CONFIGURATION

Hi,
We are using ECC 5.0. Some time back there was a requirement and I implemented BADI BDCP_BEFORE_WRITE to not generate change pointers for some particular type of Sales Order.
Now when we use function module(s) CUD0_GET_VAL_FROM_INSTANCE, VC_I_GET_CONFIGURATION, VC_I_GET_CONFIGURATION_IBASE or even try to use the value VBAP-CUOBJ and try to check in table AUSP we don't find a match for the same.
But when we use VA03 t-code and go to the configuration display of that item, it shows up the values.
Could someone please help me understand how can I retrieve those values using a function or a selct statement to get the characteristics values for the line item of the order.
thanks
Satya

Hi Pal,
Sorry i am checking your post late.
Even i faced the same problem earlier. But i found out the reason behind this. The function module related to Variant configuration will only gives the data existing in database. but where as the CU50 screen shows the data which was recorded recently. but there may be a chance that this data not existing in the database.
This depends on how you managed the data. To find out whether it is existing in the database or not.
Check the Environment - Change Documents where in you will find whether the characteristic result is added/deleted/updated.
so lets say if a value is entered and is updated in the database and later is been modified but not updated properly. this case you will see the valued which is updated but not the latter one.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D

Similar Messages

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

With new Free Characeristics Aggregates are not being used

Hi....i have a query from a multicube with two infocubes where i have two aggregates one for each cube...in my query both aggregates are being used with no problems....when i add a new free characteristic that appers on aggregates something happens and the aggregates are not being used anymore...i dont understand why this happens because i know that ......free characteristics ....doesnt affects the aggregates usage....is this correct??? or not?
Regards

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

The data from a table of a database are not retrieved in ADF BC Application

I have two separate ADF BC applications. Each application retrieve
the data from the same scheme of a database. Both applications work
well when I launch them under embedded OC4J. I have deployed
these applications to a standalone OC4J. When I launch one application,
the data from a database's table are retrieved. When I launch the other
application, the data from a database's table are not retrieved. Why? Please,
help me.

Any error message ?
Frank

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Spooling out profile that are not being used

hi guys,
is there anyway to spool out those profile that are not in used or assigned to any username or roles?

flaskvacuum wrote:
hi guys,
is there anyway to spool out those profile that are not in used or assigned to any username or roles?
SQL> CREATE PROFILE test LIMIT
2     FAILED_LOGIN_ATTEMPTS 5
3     PASSWORD_LIFE_TIME 60
4     PASSWORD_REUSE_TIME 60
5     PASSWORD_REUSE_MAX 5
6     PASSWORD_VERIFY_FUNCTION null
7     PASSWORD_LOCK_TIME 1/24
8     PASSWORD_GRACE_TIME 10;
Profile created.
-- Created but not assigned --
SQL> select distinct profile from dba_profiles where profile not in (select profile from dba_users);
PROFILE
TEST
SQL>

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS

I currently install a software that needs to have a services run in order to for the license to be detected.When i run the services manually i got this error message
'THE UBSLAN_LDR SERVICE ON LOCAL COMPUTER STARTED AND THEN STOPPED.SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS'
What can cause this and solution please

Hi kuados ,
Thanks for posting here.
After reading your posting I understand that when you establish USBLAN_LDR service on windows server 2008, system prompt an error message.
According the information what you provided right now, it’s hard to determine what cause this issue, you may like to post more information about your environment
(Event log ,Other System prompting etc… ).
Please check if it worked with assign a Local System account instead of Local Service account to run this service.
Open service MMC snap-in.
Right UBSLAN_LDR service , and click “properties”.
Click “Log on” tab , and assign a local account for running this services.
Seems this issue related to a third party software, I suggest to consult software vendor for future troubleshooting.
Please understand that I don't mean to bounce you between different solution provider as I am fully aware how time consuming this can be. However, they really are
in a better position to be able to assist you with this issue as they may have experienced similar issues.
Thanks for your understanding.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Attachments with polish characters are not retrieved

Dear Experts,
when i try to retrieve attachments moved to DMS for a material document with Polish character, it says document not found.
steps:1. created attachments for a material document
          2. moved the attachments to DMS.
          3. When we try to retrieve it is failing.. giving KPRO error
When we debug. the Polish characters are converted to Normal characters and sent to DMS, When SAP tries to retrieve, DMS sending back the normal characters file, But SAP is not recognizing the file.
Eg. Ś is converted to - s,      Ż is converted to- z
any help will be highly appreciated.

Hi Janaki,
The originals will be retrieved only when the characteristics are defined with respective document type class. and it sholud appear in the additional data fields as a field for the documenty type.
The charactersitics apart from the document class can.t retrieve the documents.
I hope this will resolve the query.
Regards,
Ravindra

Photo Geo tags are not being used by Places

I have been importing photos into iPhoto with valid geo tags and none of the photos are being shown on the Places map.
When I initially starting using iPhoto I imported some pictures from my iPhone and realised that the pictures were identified on the Places maps automatically, since I have added photos and manually edited the location information directly in Places.
If I import pictures from my iPhone they are not entered into Places and if you check all the location information is blank, if you look at the extended information you can see all the correct GPS information...
I'm confused..

in your iPhoto preferences is look up places set to "Automatically"? The default is "never" and it must be changed to "automatically" to work.
LN

Changes are not reflecting using af:resource for adding CSS

Hi,
I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
Any help will be appreciated
Thanks,
San.

Hi,
if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
Frank

How to tell which Indexes are not being used?

We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One
particularily large customer takes a very long time and we are looking for ways to speed up thier data import and transformation. I would like to see which indexes he does not use and possibly remove them. Each night we fully repopulate hundreds of staging
and ods tables and incrementally delete and repopulate the days work for a handful of history type tables. Removing some indexes off of the large tables could make a big impact.
How can i tell which indexes the customer does not use?

> IDENTIFYING UNUSED INDEXES IN A SQL SERVER DATABASE
Just because an index is not being used does not necessarily mean it should be removed.
> Index This: All About SQL Server Indexes
sp_BlitzIndex
José Diz Belo Horizonte, MG - Brasil

How do I delete places in the organizer that are not being used?

In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos. When I try to do conduct an advanced search, the place is appearing as a checkbox. I do not want this place to show up in the search field, as we have never been there. How do I remove places that are not associated with any photos?

If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

How to remove the bufgs that are not being used

Hi,
I have a IP block that has BUFGs that may or may not be used depending on which design the IP block is used. If they are not used I would like them to be removed but the tools are not consistent, sometimes they remove them and sometimes they do not.
How do I specifically tell Vivado to remove a BUFG in the .XDC file?
I've seen someone suggest to use the following attribute in the VHDL file but I need something in the XDC file
attribute buffer_type of drck_i : signal is "none";
Thank you,
Luis

Hi
If the BUFG instance is instantiated in the IP or your design then the buffer_type attribute will not work.
The opt_design trims the unconnected instances during implementation. Ensure that the BUFG does not have DONT_TOUCH property set on it which might affect trimming.
Thanks,
Deepika.

How to identify SQL_PROFILES that are not being used?

In dba_hist_sqlstat table were found 26 Sql_Profiles, some of them are not used.
Questions:
- Is there any way to identify which one are not used?
I tried verifying DBA_SQL_PROFILES but this does not help to much.
- Analyzing one by one, Is the only way to find why they are not used?
Thanks,
Deyanira

Hello;
You should be able to Join the views DBA_USERS and DBA_PROFILES to see whats in use. ( or not in use )
select distinct
profile
from
dba_profiles
where
profile not in ( select profile from dba_users ) On the second question I would ask the DBA.
Best Regards
mseberg
Dan is correct. I have misread the question. Sorry about that.
Edited by: mseberg on Jun 28, 2012 3:06 PM

SalesOrder characteristics are not retrieved using VC_I_GET_CONFIGURATION

Similar Messages

Maybe you are looking for