Salesperson information in R12

Hi All,
I am new to Release 12, while searching for salesperson using Oracle 11i navigation i am unable to find that tab called classification. Hear is the my search result.
Order management --> customer --> standard
while searching using customer number we can able to find the customer information.
in 11i when we use same criteria we can able to find the column called sales person under classification tab.
could any one help me to find the sales person information in R12.
Thanks,
Red.

hi all,
i got it.
thanks.
Red.

Similar Messages

Need Information On R12 Error tables.

Hi Friends,
I need information on R12 Error Tables and Staging Error tables. Can you please send me any documention on this.
Little bit urgent.
Thanks

Thanks for you Reply.
Actually i am new to Apps. I am a OBIEE Developer. Here i will tell you the process. From Flat files to Staging area they are Loading the Data using some Scripts. After that they are using some concurrent programes for clensing the data and load them in to the Interface Tables. Then Those tables are loaded in to the Main oracle Tables.
Mean while when they loading the data from staging to Interface they clensing the data. If Any errors occur they are moving those tables into some Built in Tables like (MTL_Interface_Errors). This is the process.
And i don't know how to find the error tables..
Thanks.
Edited by: 806756 on Nov 9, 2011 1:34 AM

11i information in R12

Hello all,
In 11i AP, gl_je_lines table we found the below information
jl.reference_2 "INVOICE_ID"
,jl.reference_5 "INVOICE_NUM"
,jl.reference_1 "SUPPLIER"
,jl.reference_3 "CHECK_ID"
,jl.reference_4 "CHECK_NUM"
In 11i GL, ap_ae_lines_all table we found the below information
,l.reference2 "INVOICE_ID"
,l.reference5 "INVOICE_NUM"
,l.reference1 "SUPPLIER"
,l.reference3 "CHECK_ID"
,l.reference4 "CHECK_NUM"
My doubt is where we can find this information in R12.
Thanks and Regards,
Muthu

Vikas Chaudhary wrote:
Hi Muthu,
There is no change in gl_je_lines and ap_ae_lines in R12, so the information you are looking for will be found in the same tables .
ThanksPl see this MOS Doc
Technical Changes in Payments from 11i to R12 [ID 786423.1]
HTH
Srini

Morsels of information about R12 customers

I know that many of you are eagerly looking out for information about real customer experiences with R12. Our Marketing department has been collecting customer experiences. There are a few snippets of information in the following press release:
"In less than 5 Months, More than 300 Customers Select the Oracle® E-Business Suite Release 12"
http://www.oracle.com/corporate/press/2007_jun/ebs-r12-momentum07.html?rssid=rss_ocom_pr
Fair warning: that's a press release, so hard technical details are a bit scarce.
If you're interested in speaking with any of the customers to get more concrete details, your best bet would be to contact your Oracle account manager and seeing whether you can arrange a direct call with them via the official Oracle Reference program.
Regards,
Steven

Hi Steven,
The phantom press release is searchable on the oracle.com website, then it shows page not found:
In less than 5 Months, More than 300 Customers Select the Oracle® E-Business Suite Release 12
com In less than 5 Months, More than 300 Customers Select the Oracle® E-Business Suite Release 12 LGE, Mexicana
http://www.oracle.com/corporate/press/2007_jun/ebs-r12-momentum07.html - 46k
In less than 5 Months, More than 300 Customers Select the Oracle® E-Business Suite Release 12 (27th June 2007)
Following the release of its new global business release in January 2007, Oracle today announced strong customer momentum for Oracle(r) E-Business Suite Release 12. Since the announcement, Oracle has added more than 300 new Oracle E-Business Suite Release 12 customers worldwide. ...
We're sorry, the page you requested was not found.
We have recorded this error (404) to help us fix the problem.
-Michael

Editing the user information in R12

Hi Experts,
I have created a user "monitor" in the R12.1.1, now I want to change its email address after logging in as user "monitor". Please tell me how can I edit the email address of the user after logging in as user by itself and also as sysadmin.
Thanks
-Naveed-

Hi,
You can update the email by logging to (System Administrator responsibility > Security > User > Define), or from user preferences (Note: 746255.1 - Allow SYSADMIN to Change Notification Preference for Users From Web Interface).
Thanks,
Hussein

License information for R12 upgrade

Gurus:
We are planning to move from RHEL 5 to RHEL 6.
Also an upgrade from 11.5.10.2 to R12
Also considering moving from 32 to 64 bit for the apps node.
Would anyone know if there is a metric document out there for us to check what kind of licenses we would need?
Apologies for any mistakes in the spelling of license -
Thanks and regards,

For license questions or queries please contact your Oracle sales representative as he/she is the best one to answer such questions.
Thanks,
Hussein

API to update AP Invoice Information in R12

Hi Gurus,
I am creating AP Invoices through iexpense modules and everything working file except project information..
While creating the expense report i have entered project number and task details. But project information is not showing in AP Invoice ( this is standard functionality ).
So, I am planning to update project related information in AP Invoice line level through API.
Please let me is there any API.
Thanks,
Sreehari.
Edited by: user10741694 on Nov 22, 2012 10:54 PM

Hi Sreehari,
for the list of available API's, please add the responsibility "Integration Repository" to your username and browse by application for the list of APIs. The expense report export uses the payables interface, hence there will be an API available for it.
Also i would suggest an workaround of capturing this information in some DFF fields in the Invoice, hence when oracle does not provide something as standard, there must be a hint of complexity involved in performing the same....
(One can also login to irep.oracle.com for accessing the list of API's but this site has been down for a reasonable period of time ..)
Regards,
Ivruksha

_all tables and views - suggestion in R12

Hi, I am trying to send one output file on invoice , and check information in R12
from ap_invoices_all, ap_checks_all
Example
I can see org_id in both tables
As of now we have only one org_id in this table as 102,
Can some one tell which is the best way to get this data from pl/sql
Do i need to set org info in my pl/sql
MO_GLOBAL.SET_POLICY_CONTEXT('S',fnd_global.ORG_ID);
or
MO_GLOBAL.SET_POLICY_CONTEXT('S',p_org_id); -- where p_org_id is create one parameter with operating unit on concurrent program
derive the org_id based on this parameter value
and pass to _all tables
or should i use views example ap_invoices, ap_checks
Which is the best approach because tomorrow if they add one more operating unit this should work.
Appreciate your response.

look at Re: How to fetch data for all OUs
use
>
MO_GLOBAL.SET_POLICY_CONTEXT('S',p_org_id); -- where p_org_id is create one parameter with operating unit on concurrent program
>
and
>
or should i use views example ap_invoices, ap_checks

API to Update PARTY in R12

Hi All,
could you please provide me the API to update the PARTY Information in R12.
Thank you,
Aush

Try:
HZ_PARTY_V2PUB.update_person
HZ_PARTY_V2PUB.update_group
HZ_PARTY_V2PUB.update_organization
Hope it helps.

Cpu patches in R12

I am under process of applying cpu jan-2012 patches, we are in 12.1.3 ,i am referring Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (January 2012) [ID 1384016.1].
document says Oracle Fusion Middleware homes for Release 12, where i need to apply patch
[applbean@bean ora]$ ls -tlr
total 8
drwxr-xr-x 10 applbean dba 4096 Jan 17 14:34 10.1.3
drwxr-xr-x 6 applbeana 4096 Jan 17 14:34 10.1.2
[applbeanana]$

Helios- Gunes EROL wrote:
Hi;
The homes mention in my previous post. The note mention how and which patchest you need to apply at below part:
Table 2: Information on patches to apply to Oracle Fusion Middleware homes for Release 12 and Oracle Application Server home for Release 11i
Regard
Helios
Helios- Gunes EROL wrote:
Hi;
The homes mention in my previous post. The note mention how and which patchest you need to apply at below part:
Table 2: Information on patches to apply to Oracle Fusion Middleware homes for Release 12 and Oracle Application Server home for Release 11i
Regard
Helios
here is fusion middleware home information in R12
*****Apache Version*****
Server version: Oracle-Application-Server-10g/10.1.3.5.0 Oracle-HTTP-Server
Server built: Jul 21 2009 11:12:22
for above i am using Document 1315202.1
in Patch Availability for Oracle Products section, i am checking Oracle Fusion Middleare subsection-->3.2.8, "Oracle Fusion Middleware"
.and 3.2.8.4 Patch Availability for Oracle Fusion Middleware 10.1.3.5.x (correct one right)
*****Forms Version*****
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
for this i am checking 3.2.8.5 Patch Availability for Oracle Fusion Middleware 10.1.2.3 section one i need to choose.

Banks Migration from R11 to R12

Hi everyone,
We want to migrate all bank information into R12, could anyone please let me know how this can be achieved?
I have some information as follows:
a) ce_bank_pub.create_bank --- To create Bank in R12
b) ce_bank_pub.create_bank_branch --- To create Bank Branch in R12
c) iby_ext_bankacct_pub.create_ext_bank_acct -- To create account in R12
Is this correct or any other interface is available? And also want to know how the extraction can be done. I mean in R11, Bank information is maintained in 3different places, so how could I consolidate this info and create one?
Please help me on this .. any documents or material.....
Thanks in Advance !!
Regards.
Naresh Kota
[email protected]

HI Naresh Kota,
I have the same task, I mean, I need to load the supplier bank information by API, could you please let me know if you found some information about how to use the API iby_ext_bankacct_pub.create_ext_bank_acct.
Thanks and Regards
Fco.

Poor customer care regarding broadband infinity

First of I had sky internet which was woefully slow, so I decided to go for unltd standard broadband from BT with a supposed 8meg speed. This worked ok for a couple of months but then I noticed the home hub4 was running slow & kept kicking me off & also showing a green light. After consulting with the BT tech team they assured me I was receiving 8meg & the reason it was running slow was my ps3 & the amount of other devices connected were a big drain! So I contacted BT regarding fibre optic infinity where I told them of the problems of the 8 meg broadband & was told that the reason it was so slow was my online gaming console was using the lions share of bandwidth making internet browsing for my wife impossible. So not being a computer broadband expert I took the sales persons reason as being accurate & promptly signed up for infinity with all the bells & whistles. However I wish that I had just stuck with the slow internet. The salesperson informed me that my installation date was on the 27th of March between 13.00 & 18.00. The engineer turns up as expected & proceeds with the install everything goes to plan until he tries to connect up to the internet. After 3 hours, most of which is on the phone he tells me there is a problem on the line or at the box. He also says he has reported it to his "engineers technical helpline" & that someone from BT will have to come out & fix it as he is only there to install inside the house. He leaves unable to fix the broadband warning that if it's not fixed before Friday at 19.00 it'll be Monday. On the Friday around 15.00 I call home to see if the issue has been resolved or if anyone from BT has been in contact regarding the problem. No one has called & internet still not working. So I then proceed to call BT from my mobile as I am the named account holder & I am a self employed plasterer working from my van with no landline. I then get passed from pillar to post with assurances that my broadband is working despite my wife telling me it's not. After 4 hours on my mobile I give up!!. When I get back home on Friday I call the cancellations dept where I get assurances that they can put me onto tech support who will resolve the issue. I get transferred to someone abroad again who gets cut off in an attempt to fix the issue, then calls back, then gets cut off & never calls back. I give up it's 20.00 on a Friday evening! Saturday I try again to find out what's going on as no one from BT has called! Once again I have an hour long call from tech support abroad who ask me to check router settings,check colour of router,speed test & on & on!! I thought the BT approved broadband engineer who installed the kit would have done?!?!? To have the tech on the other end of the phone triumphantly claim I can expect 69.2meg download speed. The page to check the download speed timed out! it was that slow. At the end of the call he told me the fault was on the line!!!!! To which I replied I told you that an hour ago because the BT installation engineer had already determined it required a BT engineer to fix it. The tech guy then told me the earliest engineer would get to the fault was 1 of April, 3 days away. Which I find absolutely mind boggling as to why it would take that long from the fault being reported on the 27th until the 1st for an engineer to even look at it 5 days later.... Unfortunately there was no movement on that date! Then on Sunday the 30th I get an unexpected call from BT tech support asking me to again check router settings,reset router switch it on & off to be told at the end of the conversation, the line is fine it's now a faulty router!?!?! & they are going to send me a new router. So I tell the tech that's a polar opposite to what the broadband engineer has said & I'll wait for the engineer to look first. After arguing that every single person I spoke to, until him had said it's the line or box! I did not want fobbed off with waiting for a new router & having the same problems again I asked to be put through to cancellations which he could not do but gave me the number to call. I called cancellations who told me that I would be due to pay them for the service if I cancelled & only tech could waive the cancellations fee. Unbelievable!!!!!!!. I then got assurances from the cancellations dept that the person I spoke to next would definitely be able to help me. I was transferred only to be told I have been put through to the phone tech dept & she couldn't help me & then got cut off!!!!! She called back & transferred me to broadband tech where I got the well rehearsed line of can you plug your PC into the router. I refused as I had now spent probably the best part of 9 hours of my life on the phone to try & resolve BT's problems of connecting me to the internet. After telling the new tech that under no circumstances will I be checking anything, he dropped the bombshell that Saturdays tech who told me an engineer was coming out on the 1st of April was wrong!!!!!! I was to expect a call from a level 2 tech who would speak to me then arrange for an engineer............. At which point I told him not to call me again just to send an engineer out to fix it & hung up. I feel angry,stressed & browbeaten. The points I now think about are 1) was there always a problem with my broadband & have I been duped into fibre at an almost double cost per month? 2) who can help me resolve this problem? I have asked for customer complaints & get told there is none??? 3) British Telecom have spent millions on sport! surely investing in customers needs to provide communications for them should take precedence on TV channels? 4) I never thought when ordering fibre broadband that the only device to connect my household to the internet would be my mobile phone personal hotspot well done Vodafone 4g. Coincidentally that's the only way I can post this!.

That is pretty much exactly the same problem as me, though my engineer came out on the 26th and an engineer has apparently been booked to have a look at the cabinet and the exchange on the 2nd of april wether that happens or not only God knows. BT have just left me feeling like theres nothing I can do and if im stuck in a contract with no internet for the next 8 months theyd still be nothing I could do about it. The problem is there is no customer to advisor understanding. They all read from the same book but come out with different excuses each time. And ive found out they tend to lie to you just to het you off the phone because they no full well youll never be able to track them down through complaints. Let me no if it gets sorted mate.

Sales person territory details

Hi,
I am importing sales person(order management -> setup->sales->salespersons) details to R12. Now my question is
is there any api or interface to insert Territories details for sales person(order management -> setup->
sales->salespersons->receivables(tab)->Territories)?
Thanks
Praveen

Any updates....?
It's urgent issue.......
Thanks
Praveen

Having multiple open periods in GL

what is the best practice for closing periods in GL when:
a) you have 48 open open periods
b) 22000 unposted journals (Some mass allocation, some imported from spreadsheets) varying from early as 2002.
c) no evidence that close process for Create Balance Sheet and/or Income state closing was run.
e) calendar year = fiscal calendar
I did test closing a period (jan-13) and except for a warning message of unposted journals, no issues. I am concerned that if we close the periods out of sync, it will affect closing balances and I am not sure if we have to run the Create Process (point c) concurrent reports again
Thanks

Hi,
sure will the closing of past periods affect your current balances, as they require
posting the open journals. And if doing so, changes are made to the balances
and balances on balance accounts of previous years are impacting opening
balance in the following year.
Apart from your situation closing oldest periods is always best practice, if one
financial year is finished, you should first close your subledgers - as a general
approach first the SCM modules (if you use some of them), then the financials
subledgers (FA, AP, AR) - and finally the GL.
As a good starting point take a look at MOS Document
EBS R12 Period Close Advisor Overview [ID 1357499.1]
There are additional Advisors giving you more detailed information:
EBS R12 Period Close Advisor: Order Management and Shipping[Article ID 1359451.1]
EBS R12 Period Close Advisor: Inventory & Costing[Article ID 1359452.1]
EBS R12 Period Close Advisor: Purchasing[Article ID 1359462.1]
EBS R12 Period Close Advisor: Receivables[Article ID 1359460.1]
EBS R12 Period Close Advisor: Assets[Article ID 1359475.1]
EBS R12 Period Close Advisor: Payables[Article ID 1359450.1]
R12: Period Close Helper - Diagnostic to Validate Data Before Period Close[Article ID 1489381.1]
Regards

Oracle Integration Repository for API's.

Where can I find the Oracle Integration Repository for all the API's related information for R12. Initially i used to go through this site http://irep.oracle.com/index.html
for API related information for 11i, even this is not working. For R12 the Integration Repository is delivered as a Responsibility internally when EBS is Deployed. Is there Any way to Accesses it externally on WEB similarly like 11i one?
Thank's in Advance.

Hi;
Please check below which could be helpful for your issue:
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
Regard
Helios

Salesperson information in R12

Similar Messages

Maybe you are looking for