Salience Engine and Sentiment Analysis

Hi ,
Can anyone tell me how can i add my own sentiments keywords and tell which word should be goes into positive or which goes into negative ??
Can i create my own language in the lexalytics tool and access them into the keywords as the data into the library and tell Endeca Server and the Salience Engine that you must have to put this statement into the positive sentiment and the other into the Negative Sentiment ???
Please Reply ....

Bhumin,
Judging from your other thread, you are probably still looking to do Sentiment Analysis in Arabic, is that correct?  For the supported languages, Lexalytics supports customization to allow for different dictionaries related to entity extraction and a bunch of other features.  For more, you can see this blog post and the Lexalytics config documentation. 
However, Arabic is not a supported language for Sentiment and due to the way Arabic is constructed as a language, I don't think it's something you could handle with Lexalytics as it's currently constructed.  Your best bet is to integrate your data ingest processes with a 3rd party tool or something offered as a service to get what you need.
For example, RepuState has an API that looks pretty interesting (I have no affiliation with them whatsoever) and supports Arabic sentiment analysis.  Seems like it could be very easily hooked into Integrator.
Hope that helps,
Patrick Rafferty
Branchbird
Oracle Endeca Information Discovery Specialized Partner

Similar Messages

  • Error in Sentiment analysis using Salience engine

    I am using QuickStart install of Endeca and then installed Oracle Endeca Text Enrichment Installer 5.0 (Lexalytics Salience).
    When I run the graph using the text enrichment, it gives a ERROR message saying "Salience License doesn't support sentiment processing, sentiment processing is disabled globally for now on".
    Due to this it is not returning any documentsentiment values
    any suggestions?
    Thanks in Advance

    As mentioned in the error message, the license that you are using for the Salience Engine does not have the Sentiment Analysis feature enabled. As a result, no sentiment analysis will be done by the Salience Engine. And hence, you will not get the document sentiment.
    Please make sure that you have an appropriate license for the Salience Engine.

  • Installing Text Enrichment with Sentiment Analysis (Salience 5.1.1.7349)

    Hi everyone,
    I’m trying to install Text Enrichment with Sentiment Analysis (Salience 5.1.1.7349) on Oracle Linux 6 and am referring to the IntegratorETLTextEnrichmentQuickStartGuide.pdf  and http://dev.lexalytics.com/wiki/pmwiki.php?n=Main.Installation#Linux
    From the instructions in the link, I don’t understand where is the installer to be run and secondly, I don’t see the license.v5 file in my download.
    In another post I saw, it was saidd that the license file isn't required for Endeca 3.1 onward. Is that true?
    I'd be very grateful if someone can help me understand what is the right procedure to install this..
    Many thanks!
    Rahul

    Hi Rahul
    You must download the "Oracle Endeca Text Enrichment with Sentiment Analysis 5.1.1 Installer for Microsoft Windows x64 (64-bit)" package from Oracle Delivery Site.
    There you will find everything you need to perform the installation (both the license and the installation file) and different language dictionaries.
    If you have any problems with it feel free to tell me.
    @a greeting

  • Turkish support for sentiment analysis

    Hello,
    in many web pages it says
    "Oracle Endeca Server supports following languages:
    Catalan, Chinese (simplified/traditional), Czech, Dutch, English, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Thai, Turkish"
    Does this mean Turkish is also supported for sentiment analysis? I could not find Turkish in Endeca documentation.
    Thanks..

    I'm assuming that you are using the Text Enrichment component in the Integrator ETL product. In that component, the Sentiment Analysis feature uses the Salience Engine from Lexalytics. The languages supported by the Salience Engine are listed here:
    Multi-Lingual Support | Lexalytics
    Turkish is not one of the supported languages.

  • Message flow between advanced adapter engine and messaging system for ICO scenarios

    Dear all,
    I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
    Below is an example of message log for one message:
    12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
    12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
    12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
    12/08/2014 09:26:06.499    Information    Message successfully put into the queue
    12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
    12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
    12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
    12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
    12/08/2014 09:26:06.501    Information    Message status set to DLNG
    12/08/2014 09:26:06.513    Information    Message successfully put into the queue
    12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
    12/08/2014 09:26:06.515    Information    Message status set to DLNG
    12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
    12/08/2014 09:26:06.548    Information    Message successfully put into the queue
    12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
    12/08/2014 09:26:06.550    Information    Message status set to DLNG
    12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
    12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
    12/08/2014 09:26:06.571    Information    Message successfully put into the queue
    12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
    12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
    12/08/2014 09:26:06.573    Information    Message status set to DLNG
    12/08/2014 09:26:06.580    Information    Message successfully put into the queue
    12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
    12/08/2014 09:26:06.582    Information    Message status set to DLNG
    12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
    12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
    12/08/2014 09:26:06.583    Information    XI message received for processing
    12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
    12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
    12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
    12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
    12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
    12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
    12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
    12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
    12/08/2014 09:26:06.821    Information    Message status set to DLVD
    Thanks & regards
    Dingjun

    Hello All,
    Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
    with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
    File Location --> file adapter -
    > XI(AAE) --> JDBC adapter --> database.
    In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
    gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
    Regards,
    Achari.

  • Main in inbox and sent folder gone after recreating mail account in prefs

    I called my ISP when I was getting outgoing mail server error messages. Their tech person said that I had to recreate that email account. They had me delete the existing account then basically make the account again. Expletives deleted. The result for this brilliant advice was that all the mail in my inbox (800 messages) and sent mail copies (maybe 4000 messages) is gone. Apparently over written by a new account with the same name as the old one. I didn't expect that the mail messages themselves would be removed, just the account settings. Is there any sort of trash place that I might be able to recover them from? I've checked the obvious places in myuseraccount>library>mail.

    Hello David.
    Your ISP gave you some not so good advice without being familiar with the Mail.app account and associated mailbox filing structure at the Finder level. Not good news but don't shoot the messenger.
    Before deleting an account in Tiger Mail, the following warning message is provided:
    Are you sure you want to remove the (account type here) account “XXXXXXXXXX”?
    This will permanently delete the account setup information, mailboxes, and messages from your computer. Copies of messages on the mail server, if they exist, are not affected.
    This is usually ignored or not completely understood but is based on the Mail.app filing structure so now the long winded answer for the reason.
    Many other email clients utilize a single large database which is not dependent on individual account and associated mailbox filing.
    When creating an account in Mail, an account named folder (named by the user name and incoming mail server for the account) is created in the Mail folder at Home > Library > Mail using the Finder.
    For POP type accounts, the following mailbox (mbox) folders are created within the account named folder when the function is used by the account: INBOX.mbox, Drafts.mbox, Sent Messages.mbox, Deleted Messages.mbox and Junk.mbox (when Junk mail is set to automatic). The mbox folders within the account named folder represent the account named mailboxes under In, Drafts, Sent, Trash and Junk (when Junk mail is set to automatic) in the Mail.app mailboxes drawer.
    When deleting an account in Mail, the account named folder at Home > Library > Mail is deleted at that time and as the warning message indicates, the associated account mailboxes within the account named folder are also deleted. You must select OK after the warning message appears.
    It would be preferable for the account named folder to be moved to the hard drive Trash can which requires an additional step to delete but this is not what occurs.
    To have any hope of recovering your data, you need to immediately stop using your system and then purchase a copy of a recovery tool such as Tech Tool Pro (Micromat) or Data Rescue (Prosoft Engineering), both of which have data recovery tools. I've not used Data Rescue, but I've seen reports that it recovers files that the others cannot, so it might be your best hope. The chances generally aren't really good even so, but short of sending your drive to a data recovery service (expensive), such utilities are your only hope.
    Note that the more you use your system before you attempt recovery, the more likely it is that the system will overwrite the sections of the drive where the data you want to recover is stored, rendering it unrecoverable by any means. You should therefore stop using the system completely until you get and try to use one of the file recovery tools.
    This also emphasizes the importance of maintaining a regular backup of the Mail folder and other important data.

  • How to install LV runtime engine and run .vi's in linux

    I am attemtpting to load run time engine and run a .vi on Linux system.
    Here is what I have done so far.
    1. I don't have rpm on my system (gentoo) so I used the app on the install cd called INSTALL.norpm to install
    labview70-rte-7.0.1.i386.rpm. It looks like it worked, there are a lot of files copied to /usr/local. A couple of .so files and a directory called Labview-7.0 (12M of files). 
    2. Made a test vi on other linux box that has full development system installed (also gentoo but i have rpm on this system).
        Do I need this application builder i keep hearing about to make an .exe or can I run vi's with this run time engine?
        What is the syntax to run a vi in linux?  ./test.vi   ????
        Is application builder a seperate program that I must purchase?
    When I attemp to run a vi I get garbage printing to the console, not unlike when you cat a binary file.
    Any help would be appreciated. Is there instructions somewhare??? A manual perhaps that explains rte install and operation.
    D.A.M.

    You need the application builder to create an exe. The rte by itself will not run a VI. The exe does require the rte. It is possible to create a "loader" program that you can use to run separate VIs but the loader program must be created with the app builder. The app builder is a separate add-on or if you buy the professional version of LabVIEW, it comes included with that.

  • Data Federator data lineage and impact analysis

    Hi,
    I am looking for the use of data lineage and impact analysis feature in data federator at Universe level.
    Can I know which objects are using which fields by uisng impact feature in the data federator.
    Thanks in Advance.

    I realize this answer is a cop out but I'll suggest it anyway. Upgrade.
    I struggled with getting the lineage and impact analysis working in 10.1 and had to do quite a bit of trial and error in the Apache configuration files, DAD's ,etc. because the lineage reports were web based. I never got them working in Production due to other much more pressing implementation issues at the time and never went back to fix them.
    In 10.2 and above the reports are much easier to get with no real configuration needed.
    Anyway, back to your question, I would suggest going back through the 10.1 documentation on getting those to work and have someone a bit familiar with setting up Apache help you. I did get them working in our Test environment but its been so long I can't recall all the steps and tricks, sorry.
    -gary

  • Merging Sales Analysis and Purchase Analysis

    Hi Guys
    is it possible to merge the Sales and Purchase Analysis into one report? maybe if i had the SQL statements and then using a union all would work? i would like to see all /AR invoices and credit notes on one report, with gross profit margin etc, is this possible? i will always run the report by Item Group (Monthly)
    Thanks
    Edited by: Euston Ferreira on Oct 29, 2008 12:02 PM
    Edited by: Euston Ferreira on Oct 29, 2008 12:56 PM

    Hi Euston
    This will be achieved by using the OINM table which contains the item codes, document numbers, BP, IN/Out Qty, G/L Accounts, etc.
    Let me know if you need help with the query.
    Kind regards
    Peter Juby

  • Totals, Subtotals and ABC Analysis buttons missing from ALV.

    Hi,
    I have used FM REUSE_ALV_LIST_DISPLAY in my report without specifying a PF-STATUS that means STANDARD PF-STATUS is used in ALV, and moved from Quality to Production, till yesterday all the features such as Sort, Filter, Local file along with Totals, Subtotals and ABC Analysis were visible, today all buttons are visible but TOTALS, SUBTOTALS and ABC ANALYSIS buttons are missing.
    I have not done any changes to the Code nor the layout.
    Thanks in advance.
    Sunil.
    Edited by: Sunil Saini on Nov 24, 2010 11:26 AM

    Hi Lalit,
    I have checked the Layout.
    In Layout in Quality there are checkboxes in Summation/Totals column in front of Numeric fields,
    but these checkboxes are not visible in Layout of Production system.
    Regards,
    Sunil.

  • LabVIEW Run Time Engine and ActiveX Automation Server

    Hi,
    I have a question related to LabVIEW Run Time Engine and ActiveX Automation Server:
    We have a tool developed in LabVIEW and TestStand. End user interface is a LabVIEW GUI (it's an executable) which executes TestStand sequences. Some TestStand sequences call lower level LabVIEW VIs.
    Everything works fine with LabVIEW installed, but I was wondering if I could run this tool on deployment machine with only LabVIEW run time engine installed. We are using LabVIEW 6.1 and with only the run time engine installed, I get the error message: "Unable to launch the 'LabVIEW.Application' ActiveX automation server ". 
    BTW, we are planning to upgrade the versions soon.
    Is it possible to make things work only with the run time engine?
    Thank you.

    Thanks for the response, Brian.
    I did upgrade to LabVIEW 8.0 and TestStand 3.5. Everything works fine on the development computer where LabVIEW and TestStand is installed. On the target computer in the lab, I installed LV RTE 8.0 and TestStand 3.5, and now when a VI is called in a sequence file, I get the following:
    RunState.PreviousStep.Result.Error.Code  -18002 
    RunState.PreviousStep.Result.Error.Msg  "LabVIEW: The VI is not executable"
    So, the executable opens and works fine (which means that the LV RTE is installed properly), but when a sequence calls a low level VI, it does not make it through.
    comments/suggestions are appreciated. Thanks.

  • DB02 view is empty on Table and Index analyses  DB2 9.7 after system copy

    Dear All,
                 I did the Quality refresh by System copy export/import method. ECC6 on HP-UX DB29.7.
    After Import Runstats status n Db02 for Table and Index analysis was empty and all value showing '-1'. Eventhough
    a) all standard backgrnd job scheduled in sm36
    b) Automatic runstats are enabled in db2 parameters
    c) Reorgchk all scheduled periodically from db13 and already ran twice.
    4) 'reorgchk update statistics on table all' was also ran on db2 level.
    but Run stats staus in db02 was not getting updated. Its empty.
    Please suggest.
    Regards
    Vinay

    Hi Deepak,
    Yes, that is possible (but only offline backup). But for the new features like reclaimable tablespace (to lower the high watermark)
    it's better to export/import with systemcopy.
    Also with systemcopy you can use index compression.
    After backup and restore you can have also reclaimable tablespace, but you have to create new tablespaces
    and then work with db6conv and online table move to move one tablespace online to the new one.
    Best regards,
    Joachim

  • I need to get a copy of my childs incoming and sent yahoo mail in Apple mail without it being able delete on either end to affect both?

    How can I get a copy of my childs incoming and sent yahoo IMAP address e-mails in Apple Mail? It has to be without each being able to affect the other meaning ( if something is deleted in one it doesn't affect the other).
    I did previously add my childs yahoo e-mail account to Apple mail but did not Sync it. But, as soon as I deleted an e-mail in Apple mail it did so in my childs yahoo mail & and vise versa. Is there another way I am missing?
    Thanks in advance for your help it is much needed!

    How can I get a copy of my childs incoming and sent yahoo IMAP address e-mails in Apple Mail? It has to be without each being able to affect the other meaning ( if something is deleted in one it doesn't affect the other).
    I did previously add my childs yahoo e-mail account to Apple mail but did not Sync it. But, as soon as I deleted an e-mail in Apple mail it did so in my childs yahoo mail & and vise versa. Is there another way I am missing?
    Thanks in advance for your help it is much needed!

  • My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

    My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

    If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
    In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

  • How do I get rid of duplicate "in" and "sent" mail boxes?

    I have installed a new version of Thunderbird on a new machine and used Easy Transfer to move my mail boxes etc from my old machine. The problem is that I now have duplicate "in" and "sent" mail boxes. New in and sent mail only appears in one of them but I can't delete the other. I have deleted all messages in the extra "in" box (they were all duplicates) but have not been able to do the same with the messages in the duplicate "sent" box because the "deleted" folder where they would go is not big enough to take the 16000 messages in there (when I "select all" and "delete" it just says "deleted folder is full" when in fact there's nothing in it; I am assuming this just means it would not take all the messages to be deleted). Help please!

    Try rebuilding the global data base
    https://support.mozilla.org/en-US/kb/rebuilding-global-database

Maybe you are looking for