SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Similar Messages

  • TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

    I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

    So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
    Confused?

  • Solution Manager and external Central Monitoring system

    We have a Solution Manager system SOL and a Central Monitoring system
    CEN.  The monitored system SDS is configured to report CCMS data to CEN
    and I wanted SOL to be able to access this data.  After configuring SDS
    to CEN, CEN that the following entry in RZ21:
    SDS#SDS_RZ20_COLLECT#SDS_RZ20_ANALYZE
    After performing the wizard in SOL, SOL now has the following entries
    in RZ21:
    SDS2#SM_SDS2CLNT200_READ#SM_SDS2CLNT200_TRUSTED
    This would indicate to me that SOL is reading the CCMS information
    directly from the monitored system, rather than via CEN.
    In the 'Setup System Monitoring' of Solution Manager the Central
    Monitoring System and CEN destination are SOL and NONE respectively.
    Is this configuration correct, and if not how do I correctly configure
    it?
    Is the monitored system now only reporting data to SOL, or is it
    reporting to both CEN and SOL?
    Regards,

    Issue closed

  • TS1538 hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....pleas

    hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help

    https://discussions.apple.com/message/23100453#23100453
    more hits from the search
    https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

  • I have got an ipad mini with wifi and cellular, does it use a 3G or a 4G sim/network? I'm unsure

    I have got an ipad mini with wifi and cellular, does it use a 3G or a 4G sim/network? I'm unsure

    Depends on your cellular carrier.
    http://support.apple.com/kb/ht5205
     Cheers, Tom

  • Problem with T61 and DVI External Monitor (via Advanced Mini-Dock)

    Ever since I upgraded to Vista SP1 on my ThinkPad T61 (with an Intel integrated 965 series graphics card), I've been having problems when I try to use an external monitor via the DVI port in my Advanced Mini-dock.  I'm curious if other people have experienced this problem.
    The problems surfaces when I first boot up, or sometimes after my ThinkPad has been running for awhile (particularly when I do something graphics related, such as right-clicking to open display properties).  The picture starts to flicker (or disappear and reappear, like the screen does when changing graphics resolutions).  I also hear the "ba-bum" sound that you hear when disconnecting a piece of hardware, followed by the "bum-ba" reconnection sound - these two sounds happen repeatedly (sometimes as fast as once per second).  If I don't do anything, sometimes I'll get a bluescreen.
    Not long ago, I found a fix of sorts: to stop the flickering/reconnecting, I just open Task Manager and stop the process called "igfxpers" (an Intel driver problem).  The problem always disappears after I do this, although I have to remember to do it every time I reboot or else the problem comes back.  So it's not an ideal fix.
    This problem doesn't happen when I connect an external monitor using the analog VGA port, or when I'm just using the notebook LCD.  It's limited to just the DVI connection.  I've tried two different digital monitors (one LG, the other BenQ) as well as two DVI cables - the problem is still the same.  So it seems like a driver problem of some sort - unfortunately, the Intel drivers haven't been updated since last February.
    I should also note that I've tried reinstalling my OS two or three times, and the problem always comes back.  Has anyone else had this problem, and is a fix on the way?

    Error Message:
    Input signal out of range. Translation:
    You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate. The two main causes for this are that the user has set either the resolution or the vertical frequency rate too high. For example, you might set a new graphics card to display at 1,280 x 1,024, but if the monitor is only capable of 1,024 x 768 resolution, you’ll get a Sync Out of Range error. This is especially common in 14-inch monitors.
    Solution:
    Because you obviously can’t make settings changes from within regular Windows, you’ll need to reboot into Windows Safe Mode. When you restart the system, there is a point during boot up when the system switches from reporting diagnostics and detected components to loading Windows. This point is usually accompanied by a beep and the screen going black. Just before this point, you want to start repeatedly pressing the F8 key. This should bring up a menu of Windows boot options. The one you want to pick is Safe Mode.
    From Safe Mode right-click the Desktop and select Properties. Go to the Settings tab and use the slider to drop your resolution a notch or two. Reboot and let Windows try to go into Normal mode. If this still doesn’t work, go back into Safe Mode and get to the Settings tab of Display Properties. Click the Advanced button, go to the Monitor tab, and check your refresh rate. The lowest advisable rate is usually 60Hz, although this works better for LCDs (liquid-crystal displays) than CRTs (cathode ray tubes). Apply the change and reboot.

  • Problems with Retrospect and too scared to use TM

    I upgraded to Leopard on both my PB and my G5 a few weeks ago and need to get back in the swing of backing things up. On my G5 I have 2 internal drives - a Boot drive with the OS and applications and a User drive with User data. On 10.4.x I used Retrospect to backup my User drive 3 times a week doing just a Duplicate and I would clone my Boot drive with CCC usually before any update so I always had a bootable drive just in case (all to an external drive with 2 partitions). On my PB I would use CCC once a week to an external drive.
    With Leopard, I was hoping to use TM so I wouldn't need to "worry" about backing things up. However, after reading all the horror stories in this forum, I decided to use Retrospect instead, at least on my G5. So, I got the updated version of Retrospect and set about using it in the same manner I had on 10.4.x. For what ever reason, though, Retrospect will NOT do a duplicate properly and ALWAYS wants to completely delete the backup drive contents before doing the duplication! So what should only take minutes to copy/delete changed items is taking a whole lot longer and shouldn't be happening in the first place. I have no idea why this is happening and nobody in the EMC forums seems to know either, but there are others reporting the same problem.
    What the heck is Leopard doing differently than 10.4.x that would cause this? Could it be that I have the backup drive placed in the Privacy section of Spotlight so the contents don't show up in a search along with my internal? This is how I did things on 10.4.x, however.
    As for my PB, I'm guessing that CCC is still going to be the best option since TM doesn't make a bootable clone and I have no idea if ALL my data would actually be there in case of disaster. Right?
    Thanks for any suggestions.
    Anthony C.

    Dump retrospect. I have fought with them on fixing backup errors to no avail. Deja Vu was also crap and I quit using it as well.
    I was using carbon copy cloner. There is a new version for Leopard I just installed today but haven't tried yet because I'm waiting on the phone to get through to apple support. (2 months remaining... then what?) Isn't leopard suppose to install ilife 08? Still waiting on the phone for them to answer.
    I tried using disk utility to restore to an external drive but it said the process would take 2 days for 80gb of data. So I tried carbon copy cloner (old version) and it crapped out because it was installed for panther os. So now the new version to try out.
    What's the point with Time Machine? It won't back up individual files from file vault accounts which means having to backup the entire user directory anyways so why not just clone the drive? I would have thought that apple would have known to make is user friendly with file vault so it backs up changed files in an encrypted format. Everytime I have to turn on or off file vault is screws up zinio reader. Now I have to go back to turning file vault off so I can restore individual files?
    Let's hope there's better updates to resolve these issues.

  • Problems with capturing and printing-to-tape using FCP4

    Having trouble logging footage and printing to video using FCP4.
    1) When we log-in footage (capture) it constantly stops and says, "dropped frames". This usually happens after 10-15 minutes of logging-in footage. Why is this happening??
    2) When we Print-To-Tape, it will suddenly stop! Sometimes it will continue Printing-To-Tape, but without audio!
    Is this a common problem? Should we re-install FCP4?
    We've done all the software updates, but we're still experiencing these problems. We've also cleared up our computer by deleting old FCP4 projects.
    We have a G4 with three internal Hard Drives with approx 180GB each. We're using the Sony DSR-11 as our Mini-DV deck.
    Help!!!!

    We don't have Virex or Norton software in the machine. We have Disk Warrior which was helpful in the past with other problems. Should I run another check using Disk Warrior?
    We only have one machine which has three internal drives. We've experienced the same problems using each of the drives.
    We do have some video stored in the system drive, but normally we don't use that drive. The system drive currently has 70GB availble, as do each of the other internal drives.
    We have updated our FCP to 4.5, but should we trying re-installing it?

  • What is best way to set up Ipods for my children?  One lives with ex and I plan to use facetime and texting to communicate.  Should he have his own itunes account?

    I started out by setting up under my itunes account.  When I tried the facetiming my iphone with my sons new ipod it said that I was calling even though I set it up in his name.  Also, I don't know how to try to face time him.  How do I add him as a contact to facetime him.  Also, his step sister will be setting hers up also and she will want to be able to text and face time him.  How should we go about setting all this up?  Thanks for any help and I hope I explained this well enough.

    First, you should have to Apple IDs
    Second, you must have a Wi-Fi connection.
    Facetime Calls
    To add them go to address book and put in the Apple ID username under email.
    Go to facetime, click the contacts button on the bottom. Click the name they gave them. Click the email you used for their Apple ID. It should start a call with the device hooked up with that Apple ID.
    Set-Up Facetime
    Go to settings. Click facetime. Sign-in with the Apple ID you are using. When someone calls that address it should give you a notification.
    Texting
    If you are getting a new iPod you will be getting with iOS 5 wich includes iMessage to other iOS 5 devices. Just click iMessage at the home screen and type in the name of the person with the Apple ID you want to text OR type in the Apple ID you want to text. You should start a convorsation with the iDevice hooked up to that Apple ID.
    Set-Up iMessage (a.k.a. Texting)
    Go to settings. Click iMessage. Sign-in with the Apple ID you are using. When someone texts that address it will notify you.
    Hope I helped!

  • Regading SE06 and SCC4 central monitoring

    Hi Guru's,
    We have multiple production systems (say 5) , is there any way to run scan these systems to find any of these systems are open for changes thru SE06 and SCC4
    or any est known methods to do or any solution thru solution manager?
    Vinay
    Edited by: Julius Bussche on Feb 24, 2011 9:29 AM
    Please use meaningfull subject titles

    What I have used with success is jobs with variants to watch the settings on an hourly basis.
    This has the advantage that you can define the variants individually for each client and then push the exceptions out.
    You can then either watch the jobs from SolMan or convert the spool record (if found) to an SLG1 application log and use SolMan BPM to watch and alert of the application log.
    Works nicely (except that spool is a bit of a pain...).
    Julius

  • Headset with boom and user voice monitoring?

    Has anyone come across a headset for the 3G that has a boom mic AND allows the user to hear his/her voice in the headset as they speak? Regular wired phones do this, but I haven't found a cell phone headset yet to do the same thing.

    There are several that have booms (of sorts) such as http://www.plantronics.com/northamerica/enUS/products/mobile/bluetooth-headsets/discovery-925-black and also http://www.engadget.com/2008/01/03/joby-introduces-zivio-bluetooth-headset-with- boom-mic/
    But voice monitoring is not something generally done with bluetooth headsets. These are low power devices and may not have the power for that, and there is also a feed back loop being created due to the small size of these things.

  • Receive mail with POP3 and saving to file using XI

    Hello! I'm new to XI, could you help me with this "simple" task: Receive mail with POP3 and saving to file.
    Thanks!

    Hi,
    you will need:
    Mail Sender Adapter
    http://help.sap.com/saphelp_nw04s/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
    and File Receiver Adapter
    http://help.sap.com/saphelp_nw04s/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    Regards
    Patrick

  • Issues using macbook with bootcamp and external apple monitor

    I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
    Anybody experienced the same and can help?
    Thx

    just make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
    as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side.

  • Flex Application architecture with web and air interface both using common components.

    We have a flex based e-learning application. It uses HTTP REST service and webservice to communicate with ASP.Net application to fetch and store data.
    We now want to develop an adobe air version of the user interface, which the students can download on their desktop as well as mobiles (Android, others).
    What would be a good architecture for such an application which has both web and windows interface. I can see that we can reuse almost 80% of the code of our web version. But I do not want to copy and create a new windows app from the flex web app. I would want to have both co-exist.
    Let me know a good article that I can read on this.

    I dug deeper and found the concept of Shared Common Library. I am trying to implement that.

  • Facing issues with R12 and SOA 11g integration using Business events

    Hi,
    I am trying to integrate R12 application with Fusion using 11g SOA suite. I configured BES in R12 application and I am able to raise a business event and query it from WF_BPEL_Qtab. I have an Oracle applications adapter listening for the same event in SOA composite deployed over a server. I have verified the DB connection and schema for R12 application in 11g SOA server. However, no SOA instance is being generated. No server log as well.
    I understand that 11g SOA uses EDN (using fusion_edn schema) for business events. Are there any changes expected to be done to Oracle Apps adapter to ensure the event is received.
    P.S. Oracle apps adapter configuration is probably correct as the out bound calls are taking place correctly.
    Thanks,
    Sagar

    Hi,
    Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
    Can you check consumer in AQ tables.
    Thanks,
    Rahul

Maybe you are looking for