Salvation from total screw up with Boot Camp???

I tried to use Boot Camp to partition my hard drive to load on XP. I did the COMPLETELY WRONG thing and I deleted the "extra" partitions that showed up. Is there any way I can save my OS X boot up disk at this point or is it all lost?
I'm using Leopard btw.

You will need to repartition the drive unfortunately:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Similar Messages

  • I can't boot from the windows cd with boot camp

    I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

    Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
    It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

  • 10.4.5 downgrade from 10.4.6 with Boot Camp

    after the 10.4.7 installation disaster i will try to reinstall 10.4.5, but i don't want to lose my data, what can i do?
    can i use upgrade installation if i have boot camp (which i know to not run on 10.4.5)
    MacBook Pro 2ghz 2gb Ram   Mac OS X (10.4.6)  

    You can reinstall without erasing the drive by doing an Archive and Install. Be sure to repair the hard drive first, and do not do the Archive and Install unless the hard drive is without errors accoring to Disk Utility. You will need adequate space to install a fresh copy of OS X. Your old system will be archived at the root directory in a folder named Previous System Folder.

  • Upgrading to Mavericks from 10.6.8 with boot camp partition already for Windows 7

    Hello,
    I have a 2011 27" iMac/16GB ram/1TB HD on OS X 10.6.8
    I did upgrade it to 10.7 but it changed too much stuff I did not like, so it was a nightmare to get back to 10.6.8
    Anyway, I have a partition on there with Windows 7 Ultimate 64 bit that when I need to I boot into that partition.
    I use a program called reFIT when my machine first turns on to select with one, works well as it is a EFI partition tool but no longer developed.
    So regardless of the reFIT program if I upgrade to Mavericks will it screw up my Windows partition?
    I have the Windows 7 disc/image so it's not a big thing but I don't want to spend days trying to make something work if it screws up what WORKS now.
    You know the old saying, if it's not broke, don't fix it.......
    any input would be appreciated
    thanks
    philmiami

    The short answer is that it may, so keep that image available.

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • Windows XP Pro - 2 GB RAM limit with Boot Camp

    Hello,
    I have a MacPro running windows XP Professional, have Boot Camp 2.1 installed, and my computer only sees 2 gb of RAM when I have 4gb RAM installed. OSX sees all 4 gb. I am very frustrated because many of the applications I use only run in Windows. As I know this is an outstanding issue upon further research, has anyone found a way to amend this (aside from switching to Vista 64) or know if Apple is planning to fix this issue? I fear that Apple's intentionally done this
    which makes it even more infuriating. This is NOT a Windows issue; we have other machines running XP with 4 GB RAM just fine, which leads me to believe that its a problem with Boot Camp or Apple's EFI (Bios).
    Thank you in advance for your input !

    Hi,
    it's a hard- and a software problem as well.
    Since 32-bit Windows has a limited range of adress space (4GB) to use for harware (PCI-E) extensions to use, the avaiable memory to use is diminishing the more expansion slots there are.
    With the Mac Pros 4 PCI-E slots which reserve their needed adress range whether they are in use or not, this leads to an avaiable memory of 2GB.
    Since 64-bit Windows has not the 4GB limitation, therefor the PCI-E adress ranges do not delimited the amount of useable memory.
    XP-64bit would also do this trick, but is not supported by Apple.
    Regards
    Stefan

  • Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

    Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or  " No System Disk availabe".
    My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
    My Boot Camp is version 5.0.1
    My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
    From what i saw in the apple support it should work on my macbook. I hope someone can help me.
    Thanks in advance.

    Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
    Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

    Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
    NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
    I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
    I've tried a Windows DVD install disk  plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
    I have tried both wireless and USB keyboards and mouse. Same failure.
    I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
    NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
    Has anyone had the same problem?
    Has anyone succeeded? If so, any special actions or ideas?

    The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
    <quote>
    If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
    sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
    Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
    You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
    </quote>

  • Leopard 10.6.8  with Boot Camp 3.0.4 do not support Windows XP SP2???

    Hello!
    I have my MacBook Pro with Leopard 10.6.8 with Boot Camp 3 on it.Reading a BOOT CAM article I could see that it supports Windows XP SP2.I just installed Windows XP SP2...and when I am trying to use the drivers from MAC DVD it says that BOOT CAMP needs Windows 7.Why I can not use XP?Or where I can get the proper drivers?I have downloaded Boot Camp Drivers XP update pack 2.1 and tried touse it in that XP but just double clicking on it doesn't happen anything:(
    Please Help.

    Your saying BC 3.4 is on the Mac installer disk? I picked mine up in august 2011 and it only has 3.1 on it if I remember right. How did you check it?
    As of today my BC Assistant says 3.4 but the Control panel in Windows only says 3.3, I figure it an't broke I'm not worried about it.
    When you insert the disk, it asks you what to do, Run or Open, select Open.
    Make a new folder on the desktop in XP, drag ALL the files over to it.
      Right click on the setup.exe and select one of the options:
    1)-Troubleshoot Compatibility, do what it suggests,
    2)-Select Properties / Compatibility / click Run this program in Compatibility mode: then select XP sp2 and work your way up.
    If anything pops up about permissions then right click on it again and select Run as Administrator.
    If it still won't work then open the Boot Camp folder / Drivers folder / and install each one manually.

  • Trying to install vista 64 on a separate internal drive with boot camp

    running into a wall here,
    I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
    I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
    How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

    So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

  • Problem with boot camp and windows 8

    I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

    Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

  • Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

    I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates.  I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6.  I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
    I now wish to install Windows 7 Professional 64 bit on this Mac Pro.  I have never had any version of Windows installed on this Mac Pro.  I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
    My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7?  This would be a real pain to do because the two connectors to the motherboard are hard to get to.  However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant. 
    Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
    Thank you in advance for responding.
    Tom

    NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
    How I would proceed -
    Install Windows on its own drive. 
    Pull all the other drives.
    Boot from Windows 7 Pro DVD
    Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
    Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
    Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
    No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
    The Mac Pro is as close as anything to a standard Wintel workstation. 
    Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
    AV-Test.org Test Security-Software

  • Leopard partition will not boot with Boot Camp installed

    I am running Leopard 10.5.2 with Boot Camp running Windows XP on about 150 computers in multiple computer labs on my campus. My problem is that a few machines every couple of weeks will stop booting into the Leopard partition. The problematic computers will however boot into Windows every time. Is there an update or something that is causing the Leopard partition to stop booting? I run disk repair and I get "invalid node structure" which causes the repair to fail. My only solution is to partition the drive then re-image the Mac side and Windows side. This unfortunately is not happening to the same computers each time, I fix one computer, then a different has the problem and so on.
    Does anyone have an suggestions? By the way, I am running Bombich's BootPicker v. 2.0. Could this be causing the issue?

    This helped with a previous Windows issue but when I boot the system while holding "option" key, the Leopard partition does not show up. The Leopard partition shows grey out when I boot from an install DVD and I can not repair permissions or repair disk.

  • Can't install windows 8.1 with boot camp

    I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated. 

    Excellent.
    Windows installation has four or five reboots, and the Apple BootManager tracks such reboots via the Mac NVRAM, otherwise the next reboot will cause OS X to boot rather than Windows. It is also used to set up some variables used to pass information to the CSM-BIOS layer. If an installation has failed, the variables do not reflect the current and clean state of the machine. A NVRAM reset will re-initialize these variables for the next attempt.

Maybe you are looking for