SAM's stuck in "Guest Console" after run_sam.sh

Hi
After setting up SAM_ROOT and SUN_STUDIO, I ran run_sam.sh.
But SAM is stuck only showing "Connecting to compute:33269 netcons: control-character is ^]".
I waited 10m. In general prompt, not "Guest Console", the following message is shown without change in "Guest Consol",
loading python interpreter....
starting py interface...
UI: start py thread, tid = 7
stop: # Python 2.4.2 (#1, Dec 5 2005, 10:46:53) [C]
sam>>>
BTW I wonder I need Studio program installed in OS.

In 2.C what's "Sam Console"? Is it "Guest Console"?
In "Guest Console" there is no chance of typing "run" even after 30m-waiting. The message on it is
Connecting to opensparc:32849
netcons: control-character is ^]
In launching prompt,
[2151][hyyu@opensparc:~/SAM/OpenSPARCT1_SAM_work]$ run_sam.sh
SAM Version 5.1.20, Copyright (c) 2001-2006 Sun Microsystems, Inc.
The log file is /home/hyyu/SAM/OpenSPARCT1_SAM_work/blaze_log.3890
SAM start script is <sam-1p.rc>
UI(load): loading <disk.s10hw2> memory image ...
loading disk.s10hw2, base addr 0x0000001f40000000, size 0x20000000
..................................................52428800 bytes
..................................................104857600 bytes
..................................................157286400 bytes
dlopen: "lib/libpy.so" Found!
loading python interpreter....
starting py interface...
UI: start py thread, tid = 5
stop: # Python 2.4.2 (#1, Dec 5 2005, 10:46:53) [C]
sam>>>
Here I typed "run", then there is another message.
sam>>> run
start running....
sam>>> sh: psrinfo: not found
sh: psrinfo: not found
WARN: not enough host-cpus(0) for sim-threads(1)
SYS: cpu-worker-thread[0] tid = 6; cpus={0,}
run:
sam>>> Ni DUMMY ASI, WR 0x4b VA 0x0000000000000000 Val 0x3
Then it's stuck.

Similar Messages

A project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck . All my finished projects that are in the Library infected with the same symptoms and it happens only after I w

a project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck .
All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.
I tried to open a new project and everything works
...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
the problem is that this project will take me a long, long time to rebuild
imovie 09
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz

This recently happened to me. I am a novice, but it seemed like that project got corrupted some how.
I deleted it.
Went to time machine and picked it up again when I knew it was working ok.
I lost a few hours of work, but not the entire project.
Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work).

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

HP m8430f stuck on "Starting Windows" after April 10, 2012 Microsoft Updates

HP m8430f stuck on "Starting Windows" after April 10, 2012 Microsoft Updates. Upgraded to Windows 7 X64 from Vista X64 almost two years ago. Have never had any problems until morning of April 12th. I will cut to the final resolution to help anyone else who is going through this or will in the future. After trying to repair Win7, restoring back to factory recovery (got code purple), installing clean Vista 64 and trying upgrade to Windows 7 again, formatting drive using /p:2 option of writing 0's twice to whole drive and then doing a clean install of Win7 only to get to the same place of being stuck at "Starting Windows", I tried a trick I had read about. Boot to safe mode, you will get an error that you can complete install from safe mode. Don't close window but hit Shift-F10 and a cmd prompt will open. Type in compmgmtlauncher and choose Device Manager. Disable the Visx PureTV-U 48B0 under Sound, Video and Game controllers. Reboot computer and Win7 complete installation. Since I was able to get into Safe mode back on April 12th, I should have tried disabling everything then, but since it was working without problems before the updates, I couldn't believe that it was any of the devices. I have not been able to get around this issue with the tv-tuner, but I don't have a need for it right now for it. I saw a tip to try moving it to another pci slot and I will try that if I ever have a need to open the computer. Just wanted to document what to do to save others weeks of searching. If this is a driver issue, I can't believe HP or Windows hasn't come up with a more current driver. During all of the installs, I never get a yellow triangle for that device or any indication in Event log or anywhere that there was a problem with this device.

I had a similar issue with mine not working properly running Windows 7 Ultimate.   Mine was working just fine for quite some time and then I moved my system into our TV room and hooked it up to the television, and used it there.   Everything worked fine, I then returned it to the normal location but did not plug the IR sensor back in.
I had issues with it, I then plugged it back in and it seemed to be working fine, then started to freeze while we were working on it, it would do this all the time. I was thinking I had virus, I tried restoring windows to a previous working state. Upgrading my Virus software and everything.   This was all back in October 2011. I finally just thought my system was going out after a number of years.
Then the other day for some reason I moved the IR sensor from one plug to the other. It is currently plugged into the bottom right USB port next to the RJ45 port.   It seems to be working just fine now and I don't have the device you suggested disabled, though I will keep that in mind.
Thanks for you post, Hope mine helps too.

Oracle VM Server Guest Console

Is it possible to access the guest console on the same system where Oracle VM server is installed? Or do I need to have a separate host with Oracle VM Manager to access the same? I'm planning to install Oracle VM server x86 version on a laptop, and it simply doesn't make any sense to have a separate host just for the guest console.

No, Oracle VM is not like XenClient at all. It looks like XenClient is meant for laptop and desktop users to run one or more guests that get access to the laptop hardware through some special virtualization layer that takes advantage of hardware virtualization features.
Oracle VM is strictly a server product. I.e. the guests do not get access to the server hardware, it is all emulated or paravirtualized. It is possible to pass a PCI card to a guest, but only one guest can use that device, and the server cannot use it at the same time. That pretty much excludes a laptop screen, because you wouldn't be able to control the Oracle VM server anymore with it.

I didn't get log statements in console after deploying the war file IN WAS6

I am new to web sphere 6.o server, I didn't get log statements in console after deploying the war file into the WAS

Albenn
Welcome to the Apple user discussion forums
I'll hit a few of your questions - others will have to do others since I'm not up on some of the issues you ask about
4) is there an easy way to review/delete items (in 6, i run a basic slideshow and delete on the fly -- is this still workable in 7?)?
Yes
5) Are there significant functionality benefits of 7 over 6 (e.g., does the noise function or shadow/highlight really offer significant benefits? The Events seems obvious, but I'm more interested in "under the hood" experience
Yes
Loseless editing - web galleries - events
a) Is import any faster? As my library is growing in size, the import is getting overly slow
It is fine for me (only you can compare to your current) - I have 20542 items using 26.3 GB in 271 events
7) Is there a full-screen edit mode?
yes
8) Can you configure events so that it's not just by day?
yes
9) Is 6's "roll" structure as mirrored in the file system still available in the Events approach, or is the database structure that once you've converted a library, there's no going back?
Events replace rolls (if your rolls are named - NOT the default rollxxx name - they will come across as is - to me events are rolls with much more capability and a new name - some people are VERY putoff by the change (but most love it) for reasons that I simply do not comprehend
10) What is the effective (or advised) maximum library size? I've probably got over 60GB of images in my libraries now, with 20,000 images or so. If 7 can readily digest them (and preserve all my albums, etc.), then I'd love to combine them into one, unless that will kill performance, make the database unstable, drive backups into interminable waits, etc.
The advertised max is 250,000 photos - I have about the same number of photos as you in about 1/3 the space - there are a few users here with libararies your size. With iPhoto Library Manager it is easy to maintain multiple libraries if you choose
LN
Message was edited by: LarryHN

Unable to access application set in admin console after upgrade to 7.0 M

Hi Experts
I am unable to access the Application Set through BPC Administration after upgrading our development server to version 7.0 SP3. I followed the instructions as per the Upgrade guide, and there was no issues during the installation. But when trying to access the application set i receive the following error message on step 9 ( 9/10) of during the connection.
Error message: Subquery returned more than 1 value. This is not
permitted when the subquery follows =, !=, <, <= , >, >= or when the
subquery is used as an expression.
I have done all of the steps outlined as per SAP Note 1242962, but i still receive the error message. I tried to do a SQL Profiler trace, but i have been unable to find the query which returns more than one record.
Any help is appreciated
Kind Regards
Daniel

Interesting that you ask about upgrade vs uninstall/reinstall.
We were running BPC 5.1
We have also re-installed the Admin client to be the new version.
We have been working with an outside consulting firm to manage our system upgrade/install.
Our dev and qa environments were uninstalled then reinstalled.
When we went to production, our system was intially upgraded. I do not know why this route was chosen when that was not what was completed on dev/qa. On our production 'upgrade', we are still working through issues. We then uninstalled iis, sqlserver reporting services, both .net 1.1 and 2.0, and the BPC application. Then reinstall everything and we were getting the same errors.
Our error was at Progress 10/10 Create Database Schema and check Application server collation.
Error Message: Object Reference not set to an instance of an object.
We are able to access the appShell and test copies of the appShell, we were not able to access any custom appSets which were created prior to the upgrade, nor are we able to access any appSets that were created as a copy of the custom appSet after the upgrade.
When logged with SAP, we were directed toward note Note 1331040 - Cannot log into 7M Admin console after restore from version5 noting that we needed to do the following changes:
Note that you will need to change the following:
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.112')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.112')
to
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.113')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.113')
The reason is because '7.0.113' means 7 MS SP04 while '7.0.112' means SP03.
There are 8 steps in this note, for us, only the first 2 were needed. I have asked SAP to create new note/update existing accordingly.
With the table entry, we were able to successfully access our app set.
Hope our experiences can help you out.
Thanks,
Becky Zick

Switchport Stuck in Guest Mode

I am using 802.1x authentication with multi-domain ports; Phone and PC connected to phone. The phones are Nortel (Avaya) and the PCs are Dell/HP Laptops. All are configured for Certificate authentication and this works well. However we sometimes get some ports stuck in Guest mode. when a non certificated laptop connects to a phone port and fails authentication, the data port is placed in the Guest VLAN. However when the laptop disconnects the port isn't reset and remains in the guest state. When a subsequent good laptop connects and attempts to authenticate the switch ignores this and leaves the data port in the Guest VLAN. Anyone any idea why this happens and how I can overcome it?
The switch is a 2960S with Version 12.2(58)SE2 IOS.
The port is configured as follows:
interface GigabitEthernet1/0/15
description DANS Port
switchport access vlan 1807
switchport mode access
switchport voice vlan 1855
priority-queue out
authentication event fail action authorize vlan 1871
authentication event no-response action authorize vlan 1871
authentication host-mode multi-domain
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 7
dot1x max-reauth-req 10
spanning-tree portfast
service-policy input INGRESS-CLASSIFY
end
The auth status and mac addresses on the port after the failed laptop disconnects are as follows:
sh auth sess inter g1/0/15
            Interface: GigabitEthernet1/0/15
          MAC Address: Unknown
           IP Address: Unknown
            User-Name: UNRESPONSIVE
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-host
     Oper control dir: both
        Authorized By: Guest Vlan
          Vlan Policy: 1871
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0AEF212D000003055C8D1DAC
      Acct Session ID: 0x00000653
               Handle: 0x94000306
Runnable methods list:
       Method   State
       mab      Failed over
       dot1x    Failed over
            Interface: GigabitEthernet1/0/15
          MAC Address: 0022.67cd.0eec
           IP Address: Unknown
            User-Name: RBT18991
               Status: Authz Success
               Domain: VOICE
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0AEF212D00000026000286D1
      Acct Session ID: 0x00000028
               Handle: 0xFC000027
Runnable methods list:
       Method   State
       mab      Not run
       dot1x    Authc Success
sh mac address-table int g1/0/15
          Mac Address Table
Vlan    Mac Address       Type        Ports
1855    0022.67cd.0eec    STATIC      Gi1/0/15
Total Mac Addresses for this criterion: 1
I placed the AAA, dot1x, eap and auth debug on for all events and then connected a good laptop, the only debug message I got were as follows:
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:03.708 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_authorized: client for mac address 0022.67cd.0eec is authorized GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open autn
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:03.708 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_authorized: client for mac address 0022.67cd.0eec is authorized GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_auth_client_present: client for mac address 0022.67cd.0eec has been notified on GigabitEthernet1/0/15
Mar 19 16:18:43.784 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open autn
I would have expected the auth function to have reacted to the EAP packets sent by the good client when it connected and performed eap authentication but it didn't, all it did was say the ports in Guest mode and left the laptop in this VLAN.
All help will be much appreciated.
Thanks,
Paul

Thanks for this reply, although it does provide valuable information for the "Cisco" world it doesn't help me with the problem I have.
The big question is as follows:
Why doesn't the switch react to the EAP packets it gets from the good laptop connected to the port stuck in the Guest state. The port doesn't have a data MAC in its table for the port, only a Voice MAC. It recognises a device has connected as it then places the good laptops MAC in the table BUT it totally ignores the EAP packets from this device and leaves it in the Guest VLAN where the laptop gets a DHCP address once its EAP has timed out.
Completely wrong activity!!!
Is this a bug?
Any help is much appreciated.
Regards,
Paul

Unable to open EIS console after install...

I get the error "olapbldr has encountered a problem and needs to close. We are sorry for the inconvenience.",
This displays in the typcial Microsoft Send Error Report window. THis occurs immediately after I try to open the EIS console by clicking on the shortcut in Programs menu.
Background:
I installed Hyperion System 9 release 9.3.1 from scratch.
1. Oracle Database (user IDs: hypuser for shared services, plansys and planapp for planning module)
2. Shared Services
3. Essbase
4.Planning (without EPMA)
5. HFM
6. Reporting and Analysis
I installed and configured the above components exactly as in the order given in "Installation_Start_here" document.
After completion of Step 3 above, I was able to open EIS console. At this time, it displayed the Metaoutline creation login window. I did not create any meta outline at this time.
I believe this can be done later and not part of the installation/configuration. Correct me if I am wrong.
The above mentioned error message occured after I try to open EIS console after completing the installation of products. At this stage, its not even showing any initial screen of EIS console and straight away gives the erorr message.
What could be the problem here? Did I miss anything in installation/configuration? I have followed this sequence and method in past installations, but didn't have any issue opening EIS.
cheers
Z

Iam also facing the same problem.
While open EIS console, Iam getting error like "An unhandled win32 exception occurred in olapbldr.exe".
There is no error message in log files.
Please help me

IPhone 5 stuck in portrait mode after upgrade to iOS 8

iPhone 5 stuck in portrait mode after upgrade to iOS 8.
Phone was fine before the upgrade, iOS 8.1 did not fix the issue.
Have done a factory reset at Genius bar and they say it's a hardware issue and have gotten this response below:
"Now, when you perform an update to any iOS device many system checks are run to verify that all components are working as they should. This is part of the firmware update process. When these checks are run sometimes issues are detected, even if all seemed to be running well previously. When this happens one of two things can occur. Either the hardware will be deactivated completely, or it will be locked in a state of use so that the device can still be used. In the case of the gyroscope for screen rotation, the firmware locks in place so that while not perfect, the device can still remain on some functioning level. This is what appears to have happened when you updated. The software itself did not cause any failure, but it detected a currently upcoming issue and prevented it from becoming worse."
All I want is a replacement but they want me to pay £199 since it's out of warranty.
Anyone have the same issue?

If the device is out of warranty you must pay the out of warranty replacement fee to have your iPhone replaced. If the phone was still under warranty the phone would have been replaced at no charge.

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

My iphone 5 is stuck in recovery mode after battery change?

my iphone 5 is stuck in recovery mode after battery change, I decided to change my faulty iphone 5 battery as i was out of warrenty, I managed to chance the battery with no problems (I Think), when i put the phone back together and tried to power on with the power button, nothing happened.! i connected to itunes and it powered on, displaying the connect to itunes screen (recovery mode) all was going well, the phone was restoring, the image of the phone restoring and loading up was displayed on the screen, when it finished it restarted but to show the connect to itunes screen again, it is stuck in the recovery loop. i tried the steps with holding the power and home button etc, none worked.! now when i try to restore, it extracts software but then, ' the iphone could not be restored, an unknown error occured (3194)' comes up, any ideas out there???? and Happy Christmas to Everyone ,

Hello Andyoneill9,
It sounds like you are trying to restore your phone but keep getting an errror message 3194. I want to recommend the troubleshooting steps from this article named:
Error 3194 or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Resolution
Important: If you see one of these messages and need help updating or restoring your iOS device, Install the latest version of iTunes and try to update or restore again. After that, follow these steps if you need more help.
Check your "hosts" file
After you've updated iTunes to the latest version, you can check the hosts file to be sure your computer can contact the update server. Use the numbered steps below if you’re on a Mac.
If you’re using a Windows computer, follow steps in this Microsoft support article, noting that resetting the hosts file will affect software services that rely on hosts file redirects. If you're using Windows on a business computer, consult your IT department to be sure applications will still work correctly after resetting the hosts file.
In the Finder, choose Applications > Utilities.
Open Terminal.
Enter this command and then press Return:
sudo nano /private/etc/hosts
Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
Terminal will display the hosts file. Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
Press Control-O to save the file. Then, press Enter when prompted for the filename and Control-X to exit the editor.
Restart your computer.
Try to update or restore your iOS device again.
This is the first troublehsooting step to try, so there are additional things to try if needed you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

SAM's stuck in "Guest Console" after run_sam.sh

Similar Messages

Maybe you are looking for